建筑可持续发展视角下供应链协调与社会责任共担机理研究方案架构

基于建筑全生命周期这个主线,建筑可持续发展视角下供应链协调与社会责任共担机理研究,以绿色建筑供应链运行效率为导向,以既有建筑节能改造效率为切入点,以产业链过程中各主体行为规律为基础,采用“总-分-合”的基本研究思路模式,聚焦了“主导企业驱动下绿色建筑供应链协调机理与策略、既有建筑节能改造主体社会责任共担机理、建筑废弃物再生利用产业链主体社会责任共担机理”等三部分核心内容,初步形成建筑可持续发展视角下供应链协调与社会责任共担机理的理论体系。本成果采用“总-分-合”的思路模式,基于循环经济理念和主体行为策略视角,遵循研究的学理逻辑,以研究生学位论文为基础,开展“主导企业驱动下绿色建筑供应链协调机理与策略、既有建筑节能改造主体社会责任共担机理、建筑废弃物再生利用产业链主体社会责任共担机理”3个子课题研究,从系统整体概况实施全面研究规划着手,构架了总括、绿色建筑供应链协调机理、既有建筑节能改造主体社会责任共担、建筑废弃物再生利用社会责任共担、总结等五大模块及上中下三大篇共12章的系统体系。     

Use of the Contingent Valuation Method in the assessment of a landfill mining project

A comprehensive approach for the evaluation of the economic feasibility of landfill mining (LFM) should take into account not only the direct costs and revenues for the private investor, but also the social benefits or costs (generally called externalities), in such a way that projects generating major social benefits (and no significant private revenues) are not overlooked.With a view to contributing to the development of a common framework for the evaluation of LFM projects, this paper presents the results of a case study where the issue of the assessment of social benefits from a LFM project is addressed. In particular, the Contingent Valuation Method is applied for the monetary assessment of the community-perceived benefits from the remediation of an old uncontrolled waste deposit by means of LFM and the conversion of the area into a park.Based on the results of a survey carried out on a random sample of people living near the old landfill, the economic values of the individual willingness to pay (WTP) for LFM and the subsequent creation of a public park were calculated and the correlations with the relevant variables (distance from the landfill site, age, income, sex, education level) assessed. The results were then suitably extended and the monetary value of the welfare increase of the whole population resident in the area and potentially affected both by LFM and the creation of the park was calculated.     

Land application of biosolids. Soil response to different stabilization degree of the treated organic matter

The effect of land application of biosolids on an agricultural soil was studied in a 2-month incubation experiment. The soil microbial biomass and the availability of heavy metals in the soil was monitored after the application of four different composting mixtures of sewage sludge and cotton waste, at different stages of composting. Land application caused an increase of both size and activity of soil microbial biomass that was related to the stabilization degree of the composting mixture. Sewage sludge stabilization through composting reduced the perturbance of the soil microbial biomass. At the end of the experiment, the size and the activity of the soil microbial biomass following the addition of untreated sewage sludge were twice those developed with mature compost. For the mature compost, the soil microbial biomass recovered its original equilibrium status (defined as the specific respiration activity, qCO2) after 18 days of incubation, whereas the soil amended with less stabilized materials did not recover equilibrium even after the two-month incubation period. The stabilization degree of the added materials did not affect the availability of Zn, Ni, Pb, Cu, Cr and Cd in the soil in the low heavy metal content of the sewage sludge studied. Stabilization of organic wastes before soil application is advisable for the lower perturbation of soil equilibria status and the more efficient C mineralization.     

双掺粉煤灰再生骨料对混凝土强度影响研究

通过试验研究再生骨料混凝土中粉煤灰和再生骨料对混凝土强度的影响。采用粉煤灰替代部分水泥、再生骨料替代部分天然粗骨料的方法,通过正交试验测定混凝土立方体抗压强度的方法,来研究粉煤灰对再生骨料混凝土强度的影响。试验得出:当再生骨料掺量为20%~30%时,粉煤灰的最佳掺量为20%左右;当再生骨料掺量高于40%、粉煤灰掺量高于20%时,其混凝土拌合物搅拌时间不小于240 s,且当粉煤灰在20%~30%时,可获得较理想的混凝土抗压强度;当粉煤灰的掺入量分布在20%~30%、再生骨料的最佳掺量为50%时,可获得较理想的混凝土抗压强度。由此得出,合理的再生骨料、粉煤灰掺量对混凝土的抗压强度影响并不明显且有提高的趋势,对降低混凝土成本,提高建筑垃圾的再生利用,有一定的经济效益和社会效益。     

Simplified heating time calculation using the Schmidt graphical method for PCB-contaminated capacitors undergoing the vacuum thermal recycling process

We discuss the use of the Schmidt graphical method to calculate the time required to heat a polychlorinated biphenyl (PCB)-contaminated capacitor in the vacuum thermal recycling process to the processing temperature of 400°C, and we evaluate the results of the heating time calculation by comparing the calculated values with the corresponding experimental values. The thermal conductivity and specific heat of the insulating paper and the carbonized paper in the capacitor were unknown, so we determined their values from experimental data obtained during the vacuum thermal recycling process. The capacitor element is a multilamination of aluminum foil and insulating paper, so we used an equation for a multilayer plane wall to calculate the value of the thermal conductivity. For the thermal conductivity and specific heat of the insulating paper impregnated with PCBs, we used values calculated from the mass ratios and thermal conductivities and specific heats of the individual materials. In addition, the physical properties vary according to the treatment because of the evaporation of PCBs and the carbonization of the insulating paper, so we modified the values of the thermal conductivity, specific heat, and density at the boiling point of the PCB and the carbonization point of the insulating paper before performing the calculations. Our calculated heating times were almost the same as, or were above, the experimental values, so we concluded that our method can be used as a simple calculation of the heating time.     

Bioreactor landfills: experimental and field results

Bioreactor landfills allow a more active landfill management that recognizes the biological, chemical and physical processes involved in a landfill environment. This paper presents the results of an experimental study carried out to determine the effect of solid waste size, leachate recirculation and nutrient balance on the rate of municipal solid waste (MSW) biodegradation. Higher rates of MSW biodegradation eventually cause a reduction of the contaminant life span of the landfill and decrease in the cost of long term monitoring. The study indicated that the smaller the size of the MSW the faster the biodegradation rate of the waste. In addition, the paper presents the results of leachate recirculation on solid waste biodegradation in a full-scale landfill site, which is located in Nepean, Ontario, Canada. The leachate was recirculated into the landfilled solid waste for 8 years through infiltration lagoons. Similar results to those obtained in the laboratory scale experiments were noted. The average pH of the leachate in the early stages of recirculation was on the acidic range of the pH scale, however, the pH value was in the range of 7-8 after 2 years of leachate recirculation. The concentration of chloride remained fairly constant at about 1000 mg/l during the leachate recirculation period. A decreasing trend of the organic load, measured as biological oxygen demand and chemical oxygen demand, was observed. Recovery of landfill air space was also noted because of the enhanced subsidence and decomposition of the solid waste.     

Material properties of water-swelling material used as a water cutoff treatment material at waste landfill sites

Water-swelling material (WSM) is a fluid sealant obtained by blending high-absorbency polymer, a filler, and a solvent by using a synthetic resin elastomer as the base material. In this research, we studied experimentally the composition of WSM, the extent of swelling, the strength of the WSM and the long-term performance of the swelling material used as a jointed water cutoff treatment material at waste landfill sites. One of the results was that adjusting the degree of etherification of the high-absorbency polymer, which is a component of the WSM, and the resin content of the synthetic elastomer contributed to improvement of the swelling of the sealant and the strength of the swelling material. Further, in long-term tests, the strength of the WSM tended to become stabilized and it was confirmed that it had sufficient pressure resistance for use in coastal landfill sites, where its application as a water cutoff treatment material is being considered.     

Test methods for assessing the biological stability of biodegradable waste

This paper presents some results of investigations for the characterization of waste excavated from closed landfills and of waste sampled during mechanical-biological pretreatment before disposal in landfill. The results reported are those obtained with the tests carried out for the assessment of the biological stability of the waste. Some of the considered tests, such as the ones for the determination of the respiration activity and the biogas production, are well known and have been applied for years; other tests, such as the ones for the determination of BOD5 and COD in leaching test eluate and of the black index, are among the tests considered by the international research community for possible utilization for the evaluation of waste biological stability. Good correlations were found for most of the results obtained, proving the reliability of the test methods used. In particular, the effectiveness of biodegradation during waste pretreatment processes can be easily monitored by measuring the respiration index and/or the BOD5 and COD in leaching test eluate; for the characterization of waste from landfills, the use of respiration index can be recommended. In both cases the COD in leaching test eluate may provide additional useful information especially in the case of low values for the respiration index. Moreover, the black index test may be considered with some limits that will be discussed, providing good results in a simple and cost effective way.     

Pyrolysis of tyres. Influence of the final temperature of the process on emissions and the calorific value of the products recovered

A study was made of the pyrolysis of tyre particles, with the aim of determining the possibilities of using the products resulting from the process as fuel. Three final temperatures were used, determined from thermogravimetric data. The design of the experiment was a horizontal oven containing a reactor into which particles of the original tyre were placed. After the process, a solid fraction (char) remained in the reactor, while the gases generated went through a set of scrubbers where most of the condensable fraction (oils) was retained. Finally, once free of this fraction, the gases were collected in glass ampoules. Solid and liquids fractions were subjected to thermogravimetric analyses in order to study their combustibility. The gas fraction was analysed by means of gas chromatography to establish the content of CO, CO2, H2 and hydrocarbons present in the samples (mainly components of gases produced in the pyrolysis process). A special study was made of the sulphur and chlorine content of all the fractions, as the presence of these elements could be problematic if the products are used as fuel. Tyre pyrolysis engenders a solid carbon residue that concentrates sulphur and chorine, with a relatively high calorific value, although not so high as that of the original tyre. The liquid fraction produced by the process has a high calorific value, which rises with the final temperature, up to 40 MJ/kg. The chlorine content of this fraction is negligible. Over 95% of the gas fraction, regardless of the final temperature, is composed of hydrocarbons of a low molecular weight and hydrogen, this fraction also appearing to be free of chlorine.     

Treatment and disposal alternatives for health-care waste in developing countries--a case study in Istanbul, Turkey.

Efficient health-care waste management is crucial for the prevention of the exposure of health-care workers, patients, and the community to infections, toxic wastes and injuries as well as the protection of the environment (Safe Management of Wastes from Health-care Activities. World Health Organization, Geneva). The amount of health-care waste produced in the Istanbul Metropolitan City in Turkey is 30 ton day(-1) in total. The method used for the final disposal of most of the health-care waste of Istanbul is incineration. However, a great portion of the infectious waste is disposed of with the domestic waste into the sanitary landfill because of improper segregation practices applied in the health-care institutions. Therefore the alternatives for the treatment and disposal of health-care waste were evaluated. The technical information related to the available treatment technologies including incineration, microwave irradiation, mobile or stationary sterilization, etc. were also investigated. The capital investment cost, transportation/operational costs for each alternative method and the different locations for installation were compared. When the data collected were evaluated, it was found that separate handling and disposal of health-care waste generated on the European and the Asian sides of the city was the most economic and practicable solution. As a result, it was concluded that the capacity of the Kemerburgaz-Odayeri incineration plant is enough to incinerate the health-care waste generated on the European side of Istanbul, the construction of a new incineration plant or a stationary sterilization unit for the disposal of health-care waste generated on the Asian side was the most effective alternative.     

Application of simulation models to the diagnosis of MSW landfills: an example

Among the landfill simulation programs being developed by several research groups around the world as tools for the management of sanitary landfills is MODUELO, whose second version, MODUELO 2, has been presented elsewhere. It reproduces the operational history of the landfill and its hydrologic and biodegradation processes, allowing the estimation of the flow and pollutants emitted in the leachate and the generated landfill gas over time. This program has been used for a diagnosis study of an existing European MSW landfill. The construction and calibration of the facility's hydrologic model, based on the available data, allowed the detection and quantification of two sources increasing the flows reaching the leachate collection system: a small portion (6-7%) of the runoff over the landfill surface and the contribution of water coming from external hillsides of the same watershed that represent a total surface area of around 20ha. The contrast of the leachate quality (COD, BOD, NH(4)-N and TKN) simulation results and measured data showed the potential of these models for the assessment of other significant aspects in landfill operation such as the potential harnessing of the landfill gas. Nonetheless, in this case as in many others, the accuracy of the simulation results was limited by the scant quality of the available data, which highlights the need for implementing continuous monitoring and characterizing protocols to take advantage of these programs as a tool for landfill optimization.     

Infrared spectroscopy studies of the photooxidation of a polyethylene nonwoven fabric

The photooxidation of a nonwoven polyethylene fabric was investigated using Fourier transform infrared photoacoustic spectroscopy. The infrared spectroscopic data indicated that hydroperoxide, alcohol, aldehyde, ketone, carboxylic acid, and anhydride groups were formed as the products of the photooxidation of the polyethylene fabric and that the relative amount of carboxyl among all carbonyls increased as the photooxidation progressed. The distribution of the photooxidation products was inhomogeneous between the two surfaces of the fabric. The highest degree of photooxidation occurred on the surface of the fabric facing the UV radiation source, whereas the lowest degree of photooxidation was on the back surface of the fabric. We also found that the polyethylene nonwoven fabric showed a slower photooxidation rate than the polypropylene nonwoven fabric. The UV radiation at 254 nm caused photooxidation of polyethylene. No photooxidation was observed in the fabric exposed to the UV radiation at 350 nm under the same conditions.     

废钢铁在钢铁行业中应用前景研究

废钢铁是我国物资回收与再生资源利用体系中的重要资源,也是非常重要的战略性资源,是钢铁工业最主要的两种原料之一(另一种是铁矿石)。与铁矿石相比,废钢铁更符合绿色可持续发展的需要和钢铁行业超低排放政策的要求,未来废钢铁资源在钢铁工业发展中的重要性可能会不断提升。着重探讨了未来10年废钢铁资源产生量的变化趋势,以及对钢铁工业原料结构变化的影响。未来中国的废钢铁资源可能不仅能满足自身钢铁工业发展的需要,同时也可能为世界钢铁工业的发展提供重要的原料。     

The effect of storage and mechanical pretreatment on the biological stability of municipal solid wastes

Modern mechanical–biological waste treatment plants for the stabilization of both the source-separated organic fraction of municipal solid wastes (OFMSW) and the mixed stream of municipal solid wastes (MSW) include a mechanical pretreatment step to separate recyclable materials such as plastics, glass or metals, before biological treatment of the resulting organic material. In this work, the role of storage and mechanical pretreatment steps in the stabilization of organic matter has been studied by means of respiration techniques. Results have shown that a progressive stabilization of organic matter occurs during the pretreatment of the source-separated OFMSW, which is approximately 30% measured by the dynamic respiration index. In the case of mixed MSW, the stabilization occurring during the reception and storage of MSW is compensated by the effect of concentration of organic matter that the pretreatment step provokes on this material. Both results are crucial for the operation of the succeeding biological process. Finally, respiration indices have been shown to be suitable for the monitoring of the pretreatment steps in mechanical–biological waste treatment plants, with a strong positive correlation between the dynamic respiration index and the cumulative respiration index across all samples tested.     

The Investigation of the Toughening Mechanism of PHBV/PBAT with a Novel Hyperbranched Ethylenediamine Triazine Polymer Based Modifier: The Formation of the Transition Layer and the Microcrosslinking Structure

A new type of designed hyperbranched ethylenediamine trazine polymer (HBETP) is successfully synthesized and characterized based upon NMR and GPC. The prepared HBETP is used to modify the poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV)/poly(butylene adipate-co-terephthalate) (PBAT) blends. The effect of HBETP on the microstructure, mechanical properties and thermal properties of the blends is studied. The results indicate that upon addition of 1.0 wt% of HBETP, the impact strength of the PHBV/PBAT blends is increased by 47.1%; ?T_g of the blends decreases from 53.2 to 49.9 °C. These results, together with the morphology analysis of the fractured surface of the blends, conclude the formation of the transition layer between PHBV and PBAT. Also, the XRD result shows that the addition of HBETP can limit the growth of the PHBV crystals and causes the decrease of both the crystallinity and the grain crystalline size. The DSC result demonstrates that the addition of HBETP mainly affects the crystallization of the HB-HV binary eutectic region within PHBV. The mechanism of PHBV/PBAT toughening is due to the formation of the strong physical hydrogen bonding and the chemical micro-crosslinking between HBETP and PHBV/PBAT, which is proposed based on XPS characterization.     

The cause and influence of self-cementing properties of fine recycled concrete aggregates on the properties of unbound sub-base

The use of coarse recycled concrete aggregates (CRCA) in conjunction with fine recycled concrete aggregates (FRCA) as sub-base materials has been widely studied. Although research results indicate that it is feasible to employ both CRCA and FRCA as granular sub-base, the influence of the unhydrated cement in the adhered mortar of the RCA on the properties of the sub-base materials has not been thoroughly studied. Generally, it is known that the strength of the sub-base materials prepared with RCA increases over time. However, this mechanism, known as the self-cementing properties, is not well understood and is believed to be governed by the properties of the fine portion of the RCA (<5mm). This paper presents an investigation on the cause of the self-cementing properties by measuring X-ray diffraction patterns, pH values, compressive strength and permeability of various size fractions of the FRCA obtained from a commercially operated construction and demolition waste recycling plant. Their influence on the overall sub-base materials was determined. The results indicate that the size fractions of <0.15 and 0.3-0.6mm (active fractions) were most likely to be the principal cause of the self-cementing properties of the FRCA. However, the effects on the properties of the overall RCA sub-base materials were minimal if the total quantity of the active fractions was limited to a threshold by weight of the total fine aggregate.     

人工湿地构造及生物因素研究进展

介绍了近10年报道的不同构造人工湿地(CW)的污水处理性能及CW中微生物、植物、动物的相关研究进展.分析了各种CW构造优缺点、CW与其他技术的结合、CW微生物群落的特征、影响因素和研究手段、CW植物与动物对CW处理性能的贡献及作用机制.提出今后应重点研究:复合人工湿地(ICW)工艺优化;CW强化技术及其参数;CW微生物...     

Life Cycle Assessment of the MBT plant in Ano Liossia, Athens, Greece

The aim of this paper is the application of Life Cycle Assessment to the operation of the MBT facility of Ano Liossia in the region of Attica in Greece. The region of Attica is home to almost half the population of Greece and the management of its waste is a major issue. In order to explicitly analyze the operation of the MBT plant, five scenarios were generated. Actual operation data of the MBT plant for the year 2008 were provided by the region of Attica and the LCA modeling was performed via the SimaPro 5.1 software while impact assessment was performed utilizing the Eco-indicator’99 method.The results of our analysis indicate that even the current operation of the MBT plant is preferable to landfilling. Among the scenarios of MBT operation, the one with complete utilization of the MBT outputs, i.e. compost, RDF, ferrous and non-ferrous metals, is the one that generates the most environmental gains. Our analysis indicates that the exploitation of RDF via incineration is the key factor towards improving the environmental performance of the MBT plant. Our findings provide a quantitative understanding of the MBT plant. Interpretation of results showed that proper operation of the modern waste management systems can lead to substantial reduction of environmental impacts and savings of resources.     

Film-Forming Starch Composites for Agricultural Applications

Biodegradable polymer composites were prepared from starch, crude glycerol, rapeseed cake and urea. The uniform films of the composites were prepared by casting technique. Mechanical properties and solubility in water of the films were studied. Increase of the content of rapeseed cake in the composites lead to the decrease of tensile strength and to the increase of elongation at break. The solubility of the composites in water increased with the increase of the content of rapeseed cake and urea. The changes of pH of soil being in the contact with the composite films were studied. It was established that the composites with the ratio of starch, rapeseed cake, crude glycerol and urea ranging from 4:6:3:0.2 to 4:6:3:1 can be used for the production of disposable plant pots. Too high content of urea can increase pH of soil up to the limit dangerous for plants.