Adsorption studies of caesium on zirconium molybdoarsenate (ZrMAs)

The applicability of zirconium molybdoarsenate (ZrMAs) for efficient removal of Cs from aqueous solution by adsorption has been investigated. The kinetics of adsorption of caesium ions has been studied by using radioanalytical procedure over a concentration range (10⁻⁴−10⁻² mol dm⁻³) and in the temperature range (303–318 K). The results showed that the uptake follows the first order rate law with respect to caesium concentration and obeys Langmuir and Modified Freundlich adsorption isotherms in the concentration studied. The effect of temperature on adsorption equilibrium has been studied and the thermodynamic quantities (ΔH^o, ΔG^o and ΔS^o) has been evaluated. They showed that the process is exothermic in nature.     

Injecting remediation compounds—How you inject is equally as important as what you inject

The injection of remediation compounds has rapidly become a widely accepted approach for addressing contaminated sites. One of the most fundamental questions surrounding the use of in situ remediation has been “What compound are you injecting at your site?” With the advances in the industry's understanding and acceptance of the in situ remediation process remediation professionals are now asking a follow‐up question that has become equally important to the success of a project: “How are you injecting a compound at your site?” This article discusses advances in field applications for in situ remediation and injecting remediation compounds. © 2003 Wiley Periodicals, Inc.     

Impact of Construction Waste Disposal Charging Scheme on work practices at construction sites in Hong Kong

Waste management in the building industry in Hong Kong has become an important environmental issue. Particularly, an increasing amount of construction and demolition (C&D) waste is being disposed at landfill sites. In order to reduce waste generation and encourage reuse and recycling, the Hong Kong Government has implemented the Construction Waste Disposal Charging Scheme (CWDCS) to levy charges on C&D waste disposal to landfills. In order to provide information on the changes in reducing waste generation practice among construction participants in various work trades, a study was conducted after 3 years of implementation of the CWDCS via a structured questionnaire survey in the building industry in Hong Kong. The study result has revealed changes with work flows of the major trades as well as differentiating the levels of waste reduced. Three building projects in the public and private sectors were selected as case studies to demonstrate the changes in work flows and the reduction of waste achieved. The research findings reveal that a significant reduction of construction waste was achieved at the first 3 years (2006–2008) of CWDCS implementation. However, the reduction cannot be sustained. The major trades have been influenced to a certain extent by the implementation of the CWDCS. Slight improvement in waste management practices was observed, but reduction of construction waste in the wet-finishing and dry-finishing trades has undergone little improvement. Implementation of the CWDCS has not yet motivated subcontractors to change their methods of construction so as to reduce C&D waste.     

RECOMMENDATIONS FOR THE MANAGEMENT OF WASTES FROM HEALTHCARE FACILITIES IN HELSINKI

In Helsinki, Finland, new guidelines have been adopted for the management of wastes from healthcare facilities. The purpose has been to rationalize waste management, reducing the amount of waste needing special treatment and lowering costs, while at the same time maintaining occupational safety and preventing environmental hazards. The changes are mainly due to the new definition of infectious waste, based on practical assessment of the possibility of spread of infection via the wastes. As a result, it has been possible to omit one chain of waste handling which has led to simpler practices and economic benefits. Sanitary landfill has been accepted for disposal of clinical waste, except for the biological waste to be incinerated for ethical reasons and infectious waste contaminated by class 4 viruses,Yersinia pestisorBacillus anthracis. Diseases caused by these micro-organisms are not a practical problem in Finland.     

Recovery of rare earth elements from waste fluorescent phosphors: Na2O2 molten salt decomposition

In this paper, an efficient recovery of rare earth elements from waste fluorescent phosphors has been reported and the novel process of alkali fusion and acid leaching has been proposed. The experimental results have shown that the key for efficient recycling is the complete dissolution of waste fluorescent phosphors. The Na₂O₂-to-waste mass ratio, calcination temperature and reactive time play considerable roles in rare earth elements extraction during the alkali fusion process. The optimal conditions in terms of temperature, time and Na₂O₂-to-waste mass ratio are 650 °C, 15 min and 2:1, respectively, under which more than 99.5 % rare earth elements are extracted. The possible reaction mechanism of alkali fusion has been proposed.     

Brownfields Update: The Reform of the Brownfields Economic Redevelopment Initiative

This journal first reported on the U.S. EPA's Brownfields Initiative in the summer 1995 edition of Remediation. At that time, the initiative was only about 15 months old, most of the state programs were in proposal stages, and little federal legislation addressing brownfields had been proposed. Today, brownfields has become such a common term that almost every environmental professional is familiar with it. The EPA has placed extremely high priority on the Brownfields Initiative and it has become a politically hot issue. This article provides an update on the current status of EPA's Brownfields program and also discusses recent legislation proposed by Congress to promote brownfields redevelopment. © 2001 John Wiley & Sons, Inc.     

Industrial Tailings in Traunsee (Austria) Revisited: The Status of 1999

Alkaline tailings from a salt work and a soda plant have been pumped into the southernmost part of Traunsee at Ebensee for many decades. A survey in 1981 showed an accumulation of more than 3 × 10⁶ m³ alkaline mud in the Bay of Ebensee and the existence of slumping structures and turbidites in the profundal zone of the lake. A new survey of the industrial tailings has been performed in 1999. Compared to the earlier survey, the accumulation in the Bay of Ebensee has grown to >4 × 10⁶ m³, which suggests an average yearly input of 90 000 m³. Slumping structures and turbidites document the unstable situation of the tailings near the waste inlet. The lake area occasionally affected by the turbidity currents in the profundal zone has increased to 19%. Within the central profundal area these tailings reach <1 m in thickness.     

Developing strategies for managing construction and demolition wastes in Malaysia based on the concept of circular economy

Construction and demolition (C&D) waste is a pressing issue not only in Malaysia, but it is also a worldwide concern including the developed countries as well. C&D waste should be managed throughout the construction cycle. The concept of circular economy (CE) is an emerging notion that has the potential to be utilized as waste minimization approach. This paper aims to assess the potentials of incorporating the CE concept as an approach to minimizing C&D wastes, by developing a CE-based theoretical framework for C&D waste management in Malaysia. In line with this objective, a systematic review has been conducted to determine how CE can be operationalised as a strategy to minimize wastes, while considering it as a key factor for mitigating the environmental impacts. Based on the literature review, a CE-based theoretical framework has been proposed using Malaysia as a case study. The framework has been developed following a three-layer approach namely micro-, meso-, and macro-levels. Waste minimization strategies have been identified for each level taking into account the main stages in the construction industry, i.e., planning, designing, procurement, construction, and demolition. The different stakeholders involved at each stage and their interactions in the stages have also been identified.     

Developing Water Stable Gliadin Films Without Using Crosslinking Agents

For the first time, gliadin films with excellent strength and water stability have been developed without using any crosslinking agents. So far, it has not been possible to obtain water stable gliadin films even after crosslinking. In this research, a novel method of using aqueous urea and ethanol has been developed to obtain highly water stable gliadin films without using crosslinking chemicals. The effects of concentrations of gliadin, urea and ethanol on the strength of the films and the stability of the films in water at high temperatures and various pH conditions has been studied. Gliadin films developed in this research have strength of about 30 MPa similar to the strength of previously reported gliadin films crosslinked with aldehydes and cysteine. Gliadin films obtained in this research were stable in pH 7.2 water at 50 °C for 20 days. The gliadin films did not dissolve in 70% ethanol which readily dissolves gliadin powder.     

The development of low cost adsorbents from clay and waste materials: a review

Increased energy consumption due to industrial growth has increased the levels of carbon dioxide (CO₂) emission being released into the atmosphere. CO₂ emission is a type of greenhouse gas which is a major cause of global warming. Since the issue of CO₂ emissions has drawn much attention in recent years, the development of CO₂ capture technology has become a necessity. Although CO₂ adsorbents are still at the early development stage, it has been suggested that CO₂ adsorbents are the most effective technology in controlling CO₂ emissions. Solid adsorbents have great potential as an alternative method to conventional adsorbents in adsorbing CO₂. In this paper, low cost adsorbents including activated carbon, zeolites, mesoporous silica and clays are discussed in terms of adsorbent preparation methods and CO₂ adsorption capacity. The low cost adsorbents are mainly derived from waste materials such as fly ash, steel slag, red mud, bagasses wastes and wood wastes. Besides that, natural resources such as clays have also been applied as low cost CO₂ adsorbents. Surface modifications have also been applied to the low cost adsorbents, including metal ion exchange and amine impregnation to enhance CO₂ adsorption capacity. In the last section, the current status of CO₂ adsorbents is summarized and future trends are discussed briefly to predict the potential materials which can be applied as CO₂ adsorbents.     

Nanoremediation and International Environmental Restoration Markets

Nanoscale zero‐valent iron (nZVI) is the most commonly used nanoremediation material. While there has been a reasonable level of application of nZVI technologies for in situ remediation in the United States, its utilization across Europe has been much more limited. There has been significant uncertainty about the balance between deployment risks and benefits for nanoparticles (NPs), which has affected the regulatory position in several countries. Some member states of the European Union (EU) take a strong precautionary view of the risks from the deployment of NPs into the subsurface, preventing the adoption of the technology. This article provides a risk–benefit assessment for nZVI based on published information and describes the steps that will be taken by a major European research project (NanoRem), as part of its work to provide a basis for better informed decision making in European environmental restoration markets. A key part of this process is dialogue between practitioners and researchers. NanoRem therefore has an active process of communication with different stakeholder networks (regulators, service providers, and site owners). NanoRem hopes to stimulate a consensus on appropriate use of nanoremediation and thereby stimulate effective technology transfer to the European remediation market. ©2015 The Authors     

Design parameters for fixed bed reactors of activated carbon developed from fertilizer waste for the removal of some heavy metal ions

Activated carbon, developed from fertilizer waste, has been used for the removal of Hg²⁺, Cr⁶⁺, Pb²⁺, and Cu²⁺. Mass transfer kinetic approach has been successfully applied for the determination of various parameters necessary for designing a fixed-bed absorber. Parameters selected are the length of the (PAZ) primary adsorption zone (δ), total time involved for the establishment of primary adsorption zone (t_x), mass rate of flow to the absorber (F_m), time for primary adsorption zone to move down its length (t_δ), amount of adsorbate adsorbed in PAZ from breakpoint to exhaustion (M_s), fractional capacity (f), time of initial formation of PAZ (t_f) and per cent saturation of column at break point. Chemical regeneration has been achieved with 1 M HNO₃.     

In situ remediation of MTBE utilizing ozone

There has been a great deal of focus on methyl tertiary butyl ether (MTBE) over the past few years by local, state, and federal government, industry, public stakeholders, the environmental services market, and educational institutions. This focus is, in large part, the result of the widespread detection of MTBE in groundwater and surface waters across the United States. The presence of MTBE in groundwater has been attributed primarily to the release from underground storage tank (UST) systems at gasoline service stations. MTBE's physical and chemical properties are different than other constituents of gasoline that have traditionally been cause for concern [benzene, toluene, ethylbenzene, and xylenes (BTEX)]. This difference in properties is why MTBE migrates differently in the subsurface environment and exhibits different constraints relative to mitigation and remediation of MTBE once it has been released to subsurface soils and groundwater. Resource Control Corporation (RCC) has accomplished the remediation of MTBE from subsurface soil and groundwater at multiple sites using ozone. RCC has successfully applied ozone at several sites with different lithologies, geochemistry, and concentrations of constituents of concern. This article presents results from several projects utilizing in situ chemical oxidation with ozone. On these projects MTBE concentrations in groundwater were reduced to remedial objectives usually sooner than anticipated. © 2002 Wiley Periodicals, Inc.     

RADARSAT SAR for oil spill response

RADARSAT synthetic aperture radar imagery has been successfully classified to delineate oil slicks on water using training areas for various degrees of oil coverage located within each image. Three and four class schemes have been tested with imagery from the Nakhodka and Milford Haven spills. An interactive graphical editor has been developed using the classified images to re-initialize the SPILLSIM oil spill model during a simulation.     

Field Intercomparison of Main Components in Air in EMEP

Within the European monitoring network (EMEP, ) several different sampling procedures for measuring the main air components have been applied. This has contributed to systematic concentration differences and a comparability problem. Since 1997 co-located experiments in 15 countries have been carried out to quantify these differences. In addition, three major measurement campaigns were organized by EMEP between 1985 and 1991. Differences among results depend on the concentration level and methods used. The decrease in SO₂ concentrations over the last twenty years has placed greater demands on the methodology. Absorbing solutions methods for SO₂, (H₂O₂ and tetrachloromercurate (TCM)) typically have higher detection limits than the reference method, which uses KOH impregnated filters. The TCM method also has problems with negative interference, especially in summertime. UV fluorescence monitors have in a few cases proven to give good results, but interferences, detection limit and poor maintenance can be problems. For NO₂, many countries are using the TGS absorption solution method, which has a higher detection limit than the reference method using NaI impregnated glass sinters. The Salzmann method gives unreliable results at concentrations below 1 μgN/m³, and even at higher concentrations the uncertainty is rather unsatisfactory. The chemiluminescence monitor with molybdenum converters tends to systematically overestimate NO₂ concentrations, possibly because zero-drift problems and the non-specific response to NO₂. Particulate sulphate measurements in general have lower bias and uncertainties than gas and other aerosol measurements.     

A Biogeochemical Comparison of Two Well-Buffered Catchments with Contrasting Histories of Acid Deposition

Much of the biogeochemical cycling research in catchments in the past 25 years has been driven by acid deposition research funding. This research has focused on vulnerable base-poor systems; catchments on alkaline lithologies have received little attention. In regions of high acid loadings, however, even well-buffered catchments are susceptible to forest decline and episodes of low alkalinity in streamwater. As part of a collaboration between the Czech and U.S. Geological Surveys, we compared biogeochemical patterns in two well-studied, well-buffered catchments: Pluhuv Bor in the western Czech Republic, which has received high loading of atmospheric acidity, and Sleepers River Research Watershed in Vermont, U.S.A., where acid loading has been considerably less. Despite differences in lithology, wetness, forest type, and glacial history, the catchments displayed similar patterns of solute concentrations and flow. At both catchments, base cation and alkalinity diluted with increasing flow, whereas nitrate and dissolved organic carbon increased with increasing flow. Sulfate diluted with increasing flow at Sleepers River, while at Pluhuv Bor the sulfate-flow relation shifted from positive to negative as atmospheric sulfur (S) loadings decreased and soil S pools were depleted during the 1990s. At high flow, alkalinity decreased to near 100 μeq L^-1 at Pluhuv Bor compared to 400 μeq L^-1 at Sleepers River. Despite the large amounts of S flushed from Pluhuv Bor soils, these alkalinity declines were caused solely by dilution, which was greater at Pluhuv Bor relative to Sleepers River due to greater contributions from shallow flow paths at high flow. Although the historical high S loading at Pluhuv Bor has caused soil acidification and possible forest damage, it has had little effect on the acid/base status of streamwater in this well-buffered catchment.     

Greenhouse gases emission from municipal waste management: The role of separate collection

The municipal solid waste management significantly contributes to the emission in the atmosphere of greenhouse gases (e.g. CO₂, CH₄, N₂O) and therefore the management process from collection to treatment and disposal has to be optimized in order to reduce these emissions. In this paper, starting from the average composition of undifferentiated municipal solid waste in Italy, the effect of separate collection on greenhouse gases emissions from municipal waste management has been assessed. Different combinations of separate collection scenarios and disposal options (i.e. landfilling and incineration) have been considered. The effect of energy recovery from waste both in landfills and incinerators has also been addressed. The results outline how a separate collection approach can have a significant effect on the emission of greenhouse gases and how wise municipal solid waste management, implying the adoption of Best Available Technologies (i.e. biogas recovery and exploitation system in landfills and energy recovery system in Waste to Energy plants), can not only significantly reduce greenhouse gases emissions but, in certain cases, can also make the overall process a carbon sink. Moreover it has been shown that separate collection of plastic is a major issue when dealing with global warming relevant emissions from municipal solid waste management.     

A Spanish model for quantification and management of construction waste

Currently, construction and demolition waste (C&D waste) is a worldwide issue that concerns not only governments but also the building actors involved in construction activity. In Spain, a new national decree has been regulating the production and management of C&D waste since February 2008. The present work describes the waste management model that has inspired this decree: the Alcores model implemented with good results in Los Alcores Community (Seville, Spain). A detailed model is also provided to estimate the volume of waste that is expected to be generated on the building site. The quantification of C&D waste volume, from the project stage, is essential for the building actors to properly plan and control its disposal. This quantification model has been developed by studying 100 dwelling projects, especially their bill of quantities, and defining three coefficients to estimate the demolished volume (CT), the wreckage volume (CR) and the packaging volume (CE). Finally, two case studies are included to illustrate the usefulness of the model to estimate C&D waste volume in both new construction and demolition projects.     

Effect of Reprocessing and Accelerated Weathering on ABS Properties

The feasibility of reprocessing has been investigated as a possible alternative for acrylonitrile–butadiene–styrene terpolymer (ABS) recycling. Up to 10 reprocessing cycles have been performed by both extrusion and injection techniques and their effect on thermal and mechanical properties have been studied. Moreover, the effect of the combined reprocessing and accelerated weathering has been analyzed. Measurements collected after each molding cycle indicated virtually complete retention of thermal properties. The same behaviour has been observed from accelerated weathering tests. With respect to the mechanical properties, neither the flow index nor the tensile strength were affected by the number of reprocessing cycles though the impact strength decreased slightly. However, the studies based on the accelerated weathering show that there is an important influence of the number of reprocessing cycles on the tensile strength.     

Abundance of 14C in biomass fractions of wastes and solid recovered fuels

In recent years thermal utilization of mixed wastes and solid recovered fuels has become of increasing importance in European waste management. Since wastes or solid recovered fuels are generally composed of fossil and biogenic materials, only part of the CO₂ emissions is accounted for in greenhouse gas inventories or emission trading schemes. A promising approach for determining this fraction is the so-called radiocarbon method. It is based on different ratios of the carbon isotopes ¹⁴C and ¹²C in fossil and biogenic fuels. Fossil fuels have zero radiocarbon, whereas biogenic materials are enriched in ¹⁴C and reflect the ¹⁴CO₂ abundance of the ambient atmosphere. Due to nuclear weapons tests in the past century, the radiocarbon content in the atmosphere has not been constant, which has resulted in a varying ¹⁴C content of biogenic matter, depending on the period of growth. In the present paper ¹⁴C contents of different biogenic waste fractions (e.g., kitchen waste, paper, wood), as well as mixtures of different wastes (household, bulky waste, and commercial waste), and solid recovered fuels are determined. The calculated ¹⁴C content of the materials investigated ranges between 98 and 135 pMC.