Presence of scapular dysfunction in dominant shoulder of professional guitar players

Background. Playing guitar can cause adoption of asymmetric postures and affect the shoulder's stability. Objective. To assess the presence of scapular dysfunction in professional guitar players. Method. A lateral scapular slide test was performed at the level of the spine of the scapula and at the inferior angle of the scapula in 20 professional guitar players (age: 18–40 years) and was compared with 20 age-matched non-players at angles of 0°, 45° and 90° of shoulder abduction with both limbs loaded with 0.5-kg weights. Analysis was done by unpaired t test. Results. Scapular dysfunction in guitar players was seen in the form of asymmetric scapula at rest in 25% and dyskinetic scapula in 20% of players. 100% of non-players had normal scapular positioning. Comparison at the level of the spine of the scapula showed no significant difference (p?>?0.05), but the inferior angle showed a significant difference at 0° (1.37?cm), 45° (1.93?cm) and 90° (2.15?cm) which was more in the player's category (p?Conclusion. There exists a marked dysfunction of scapular stabilizers in professional guitar players at the level of the inferior angle of the scapula.     

Work–family conflict and neck and back pain in surgical nurses

Objective. Surgical nurses’ work is physically and mentally demanding, possibly leading to work–family conflict (WFC). The current study tests WFC to be a risk factor for neck and lower back pain (LBP). Job influence and social support are tested as resources that could buffer the detrimental impact of WFC. Methods. Forty-eight surgical nurses from two university hospitals in Germany and Switzerland were recruited. WFC was assessed with the Work–Family Conflict Scale. Job influence and social support were assessed with the Copenhagen Psychosocial Questionnaire, and back pain was assessed with the North American Spine Society Instrument. Results. Multiple linear regression analyses confirmed WFC as a significant predictor of cervical pain (β?=?0.45, p?β?=?0.33, p?=?0.012). Job influence and social support did not turn out to be significant predictors and were not found to buffer the impact of WFC in moderator analyses. Conclusion. WFC is likely to affect neck and back pain in surgery nurses. Work–life interventions may have the potential to reduce WFC in surgery nurses.     

Measures of health,fitness, and functional movement among firefighter recruits

Aim. The purpose of this study was to examine the associations between various health and fitness measures and Functional Movement Screen? (FMS?) scores among 78 firefighter recruits. Methods. Relationships between FMS? scores and age, body mass index (BMI), sit and reach (S&R) distance, estimated maximal aerobic capacity (V˙_O2max), estimated one-repetition maximum squat (1RM-Squat_max), and plank endurance (%Plank_max) were examined. Results. Total FMS? scores were significantly correlated with BMI (r?=??0.231, p?=?0.042), estimated 1RM-Squat_max (r?=?0.302, p?=?0.007), and %Plank_max (r?=?0.320, p?=?0.004). Multiple regression analyses indicated that this combination of predictors significantly predicted (F(3, 74)?=?5.043, p?=?0.003) Total FMS? score outcomes and accounted for 17% of the total variance (R²?=?0.170). In addition, logistic regression analyses indicated that estimated 1RM-Squat_max also significantly predicted (χ²?=?6.662, df?=?1, p?=?0.010) FMS? group membership (≤14 or ≥15). Conclusion. These results suggest that the health and fitness measures of obesity (BMI), bilateral lower extremity strength (estimated 1RM-Squat_max), and core muscular endurance (%Plank_max) are significantly associated with functional movement patterns among firefighter recruits. Consequently, injury prevention programs implemented among firefighter recruits should target these aspects of health and fitness.     

A ventilation cooling shirt worn during office work in a hot climate: cool or not?

The aim of the study was to identify whether a ventilation cooling shirt was effective in reducing heat strain in a hot climate. Eight female volunteers were exposed to heat (38?°C, 45% relative humidity) for 2?h with simulated office work. In the first hour they were in normal summer clothes (total thermal insulation 0.8?clo); in the second hour a ventilation cooling shirt was worn on top. After the shirt was introduced for 1?h, the skin temperatures at the scapula and the chest were significantly reduced (p?<?0.05). The mean skin and core temperatures were not reduced. The subjects felt cooler and more comfortable by wearing the shirt, but the cooling effect was most conspicuous only during the initial 10?min. The cooling efficiency of the ventilation shirt was not very effective under the low physical activity in this hot climate.     

Anthropometric evaluation of cockpit designs

The objective of this research is to evaluate all the critical reaches in a cockpit and determine the visual sufficiency of a cockpit to accommodate 90% of potential pilots. While mismatches of measurements with cockpit dimensions are revealed, proposals are made to improve cockpit ergonomics. Regression models were generated to predict and assure adequate exterior vision. Mean, lower and upper control limits of all measurements were found acceptable except eye level. There are very strong positive relationships between stature and eye level (R²?=?0.972, p?R²?=?0.994, p?SD smaller than the eye level mean or seating adjustment limits in height may be changed. In general, cockpit design is acceptable in terms of fit/reach accommodation for pilots, except eye level and visual variables that could be solved by better seat adjustments.     

Application of mindfulness-based stress reduction to a stress management intervention in a study of a mining sector company

Purpose. The aim of this article was to check whether mindfulness-based stress reduction (MBSR) is an effective intervention in reducing work-related stress in the case of workers in a copper mine. Methods. Sixty six employees were randomized to the experimental group (32 participants) or to the control group (34 participants). Work-related stress was measured using the job content questionnaire (JCQ) and mental health was measured using the general health questionnaire (GHQ-28) Experimental manipulation was 40-h MBSR training. Results. Multivariate repeated-measures analysis of variance revealed a significant increase of JCQ decision latitude (F?=?17.36, p?<?0.001) and social support (supervisor F?=?9.00, p?<?0.004; coworker F?=?5.61, p?<?0.020), and a significant decrease in GHQ-28 anxiety (F?=?5.28, p?<?0.079) and depression (F?=?3.95, p?<?0.048) due to the intervention. Conclusions. The study confirms that MBSR can be effective in reducing stress resulting from the external risk (and/or imagined fear) of losing one’s health or life. The use of MBSR could be recommended in health and safety activities in difficult and dangerous work conditions, such as mining, to promote workers’ well-being.     

Postural and Muscular Responses While Viewing Different Heights of Screen

This study aimed to examine the effects of visual display terminal (VDT) viewing angle on human postural angle and muscular activity. The participants’ neck, thoracic bending, and trunk inclination angles; and the activity of sternocleidomastoid, trapezius, splenius capitis, and erector spinae at 5 viewing angles (+40°, +20°,0°, –20°, and –40°) of a VDT screen were collected for 1 min. This study showed that neck and thoracic bending angles increased with viewing angle, while viewing angle did not significantly affect trunk inclination angle. In addition, the activity of trapezius and erector spinae increased when viewing a higher or lower VDT screen height compared with viewing a horizontal VDT screen height; however, the activity of splenius capitis decreased with viewing angle.     

Compassion fatigue and compassion satisfaction among family physicians in the Republic of Srpska,Bosnia and Herzegovina

Aims. The aim of this study was to examine self-perceived compassion fatigue and compassion satisfaction among family physicians in Bosnia and Herzegovina and describe potential contributing factors. Methods. The cross-sectional study enrolled 120 family physicians. Professional quality of life compassion satisfaction and fatigue version 5 (ProQOL5) was used to assess compassion satisfaction and two components of compassion fatigue, secondary traumatic stress and burnout. The symptoms of chronic fatigue were evaluated using the Chalder fatigue scale. Results. The majority of family physicians had moderate levels of compassion satisfaction (70%), burnout (75%) and secondary traumatic stress (55.8%). Family physicians with higher levels of secondary traumatic stress reported chronic fatigue (p?=?0.001), longer length of service (p?=?0.024) and residency training (p?=?0.041). Chronic fatigue (p?=?0.001), living in a rural environment (p?=?0.033), larger size of practice (p?=?0.006) and high number of patients with chronic disease (p?=?0.001) were associated with a higher risk of burnout. Conclusion. Family physicians with large practices, long years of experience, a high number of chronically ill patients and experiencing chronic fatigue are at risk of developing compassion fatigue. A systematic exploration of compassion fatigue in relation to working conditions might provide an appropriate starting point for the development of preventive interventions.     

CAERvest® – a novel endothermic hypothermic device for core temperature cooling: safety and efficacy testing

Introduction. Cooling of the body is used to treat hyperthermic individuals with heatstroke or to depress core temperature below normal for neuroprotection. A novel, chemically activated, unpowered cooling device, CAERvest®, was investigated for safety and efficacy. Methods. Eight healthy male participants (body mass 79.9?±?1.9?kg and body fat percentage 16.1?±?3.8%) visited the laboratory (20 °C, 40% relative humidity) on four occasions. Following 30-min rest, physiological and perceptual measures were recorded. Participants were then fitted with the CAERvest® proof of concept (PoC) or prototype 1 (P1), 2 (P2) or 3 (P3) for 60 min. Temperature, cardiovascular and perceptual measures were recorded every 5 min. After cooling, the CAERvest® was removed and the torso checked for cold-related injuries. Results. Temperature measures significantly (p?Conclusion. This study demonstrates that the CAERvest® is an effective device for reducing body temperature in healthy normothermic individuals without presence of cold injury. Further research in healthy and clinical populations is warranted.     

Duty hours and incidents in flight among commercial airline pilots

Introduction. Working long duty hours has often been associated with increased risk of incidents and accidents in transport industries. Despite this, information regarding the intermediate relationship between duty hours and incident risk is limited. This study aimed to test a work hours/incident model to identify the interplay of factors contributing to incidents within the aviation industry. Methods. Nine hundred and fifty-four European-registered commercial airline pilots completed a 30-item survey investigating self-report attitudes and experiences of fatigue. Path analysis was used to test the proposed model. Results. The fit indices indicated this to be a good fit model (χ²?=?11.066, df?=?5, p?=?0.05; Comparative Fit Index?=?0.991; Normed Fit Index?=?0.984; Tucker–Lewis Index?=?0.962; Root Mean Square of Approximation?=?0.036). Highly significant relationships were identified between duty hours and sleep disturbance (r?=?0.18, p?r?=?0.40, p?r?=?0.43, p?Discussion. A critical pathway from duty hours through to self-reported incidents in flight was identified. Further investigation employing both objective and subjective measures of sleep and fatigue is needed.     

Role of age and injury mechanism on cervical spine injury tolerance from head contact loading

Objective: The objective of this study was to determine the influence of age and injury mechanism on cervical spine tolerance to injury from head contact loading using survival analysis.

Methods: This study analyzed data from previously conducted experiments using post mortem human subjects (PMHS). Group A tests used the upright intact head–cervical column experimental model. The inferior end of the specimen was fixed, the head was balanced by a mechanical system, and natural lordosis was removed. Specimens were placed on a testing device via a load cell. The piston applied loading at the vertex region. Spinal injuries were identified using medical images. Group B tests used the inverted head–cervical column experimental model. In one study, head–T1 specimens were fixed distally, and C7–T1 joints were oriented anteriorly, preserving lordosis. Torso mass of 16 kg was added to the specimen. In another inverted head–cervical column study, occiput–T2 columns were obtained, an artificial head was attached, T1–T2 was fixed, C4–C5 disc was maintained horizontal in the lordosis posture, and C7–T1 was unconstrained. The specimens were attached to the drop test carriage carrying a torso mass of 15 kg. A load cell at the inferior end measured neck loads in both studies. Axial neck force and age were used as the primary response variable and covariate to derive injury probability curves using survival analysis.

Results: Group A tests showed that age is a significant (P < .05) and negative covariate; that is, increasing age resulted in decreasing force for the same risk. Injuries were mainly vertebral body fractures and concentrated at one level, mid-to-lower cervical spine, and were attributed to compression-related mechanisms. However, age was not a significant covariate for the combined data from group B tests. Both group B tests produced many soft tissue injuries, at all levels, from C1 to T1. The injury mechanism was attributed to mainly extension. Multiple and noncontiguous injuries occurred. Injury probability curves, ±95% confidence intervals, and normalized confidence interval sizes representing the quality of the mean curve are given for different data sets.

Conclusions: For compression-related injuries, specimen age should be used as a covariate or individual specimen data may be prescaled to derive risk curves. For distraction- or extension-related injuries, however, specimen age need not be used as a covariate in the statistical analysis. The findings from these tests and survival analysis indicate that the age factor modulates human cervical spine tolerance to impact injury.     

A new method for calculating saddle seat height with an emphasis on optimal posture based on trigonometric relations

Introduction. Based on the literature, the ergonomic saddle chair provides the most appropriate posture for users. Determination of the seat height is critical to establish the proper posture, carried out using various methods of anthropometry. This study aimed to develop a simple and applied method for determining the saddle seat height with an emphasis on appropriate posture. Methods. In this study, anthropometric dimensions including weight, body height, popliteal height and seat height at 135° knee angle in 150 male and female dentists were measured. In the laboratory, to determine the ‘acetabuloischial number’, 25 male and female natural hip bones were measured. The mean saddle-chair height with knee angle of 135° was then compared by two different methods, field measurement and the new calculation method. Results. The results showed a strong correlation between data gathered from the two different methods, the field measurement and the new calculation method (98%), and Cronbach’s α from the intraclass correlation was equal to 0.994 (p?<?0.05). This indicated that the two methods produced similar results. Conclusion. The new method can be applied to calculate the optimal height of the saddle seat based on body height and popliteal height.     

Isometric Pull and Push Strengths of Paraplegics in the Workspace: 2. Statistical Analysis of Spatial Factors

The effect of reach levels, horizontal angles, and vertical angles on isometric pull and push strengths of male and female was determined. Highly significant increases in men’s push strength were found between extreme to maximum reaches, and from extreme to normal reaches. However, for women’s push strength, a significant increase was found only between extreme to maximum reach. Significant or highly significant increases were found in men’s and women’s pull strength between the horizontal angle (θ) sagittal through the active shoulder (90°) and other angles (0, 45, and 135°). However, for men’s push strength, highly significant increases were found between the horizontal angle 45° from the frontal plane, and other angles. For women’s push strength, significant or highly significant increases were found between the horizontal angles 0° and angles of 90 and 135°. For men’s and women’s pull strength, significant or highly significant increases were found between the vertical angle (?), 90°, and other angles (–20, 0, and 45°). Similar increases were found for women’s push strength between the 45° angle and other angles. In the design of a workstation for paraplegics that requires pull and push forces, consideration must be given to the spatial factors.     

Variability of Musculoskeletal Strain on Dentists: An Electromyographic and Goniometric Study

Introduction. Dentists and hygienists are strongly affected by musculoskeletal disorders (MSDs). As workstation concepts are supported by subjective arguments only, the aim of this study was to use objective measurements to compare the variability of strain in various concepts: a dental chair equipped with a cart or an over-the-patient delivery system without an assistant, and Dr Daryl Beach’s concept with an assistant. Methods. Goniometric and electromyographic recordings were made on 8 subjects, during a scaling operation. The electrical activity of their trapezius and lumbar muscles was compared, as were their cervical and lumbar ranges of motion. Results. The results showed that there was a wide variability depending on the workstation. However, the Beach concept tended to reduce physical strain on most parameters: duration of left lumbar muscle activity (2% compared to 15% of time spent in >10% maximal voluntary contraction, MVC), time spent in cervical side bending (4% compared to 30%), cervical flexion of >20° (9% compared to 40%), and left trapezius activity (9% of time spent >10% MVC compared to 28%). Conclusion. Practitioners and students should adjust their workstations to reduce the prevalence of MSDs.     

Effectiveness of a cooling jacket with reference to physiological responses in iron foundry workers

Personal cooling garments (PCGs) have gained increased attention in recent years due to heat stress and strain in the working environment. The present study was conducted in hot environments of an iron foundry to evaluate the efficacy of a battery-operated PCG. Twenty-four workers were exposed to climatic conditions of 35.89?±?1.25?°C, 35% relative humidity during 90-min work with PCG and habitual clothing (HC). Mean weighted skin temperature was significantly lower by 4.84?±?1.05?°C compared with HC 0.38?±?1.02?°C (p?p?相似文献   

Friction measurements on “anti-slip” floors under shoe sole,contamination, and inclination conditions

Friction measurements were conducted to study the effects of shoe sole, floor, contamination, and inclined angle of the floor surface on friction coefficient. The shoe sole samples included composite rubber outsole samples with and without V-shaped tread design. Unglazed ceramic tiles of both flat and tiles with molded profile design were tested. The contamination conditions included dry, wet, and glycerol-contaminated conditions. The inclined angles included 0°, 5°, and 10°. A Brungraber Mark II slipmeter was used. The results showed that all the four factors affected friction coefficient significantly (p < 0.0001). Flat rubber soles had higher friction coefficients than the soling samples with V-shaped tread design on all tested floors and inclined angles under wet conditions. Flat soles, however, had extremely low friction when tested on flat floors under glycerol-contaminated conditions. The floors with molded grooves perpendicular to friction measurement direction had the highest friction coefficients than all other floor conditions under both the wet and glycerol-contaminated conditions except the wet/flat sole/10° condition. A regression model with a cosine function was established to describe the relationship between friction coefficient and inclined angle of the floor under the experimental conditions. This model is statistically significant at p < 0.0001 with an R² of 0.97.     

Impact of posture and upper-limb muscle activity on grip strength

Purpose. The current research was carried out to determine grip strength (GS) with change in posture and upper-limb muscle activity of manual workers and investigate the impacts of these changes. Methods. For the current research, 120 male and 80 female participants were selected and GS was assessed using a digital hand grip dynamometer in various conditions. Results. The outcomes showed that male participants had higher GS as compared to female participants. Maximum GS was found in a standing posture with the fixed forward shoulder at 45°, elbow at 90° and a neutral position of the wrist and forearm for all participants. Conclusions. Higher values of GS were attained in standing postures which may result in attainment of higher performance levels by the workers. The outcomes justify the importance of correct postures during manual work in industries employing traditional methods.     

Comparison of Canadian firefighters and healthy controls based on submaximal fitness testing and strength considering age and gender

Introduction. Few studies have addressed whether firefighters are fitter than the general population and possess sufficient levels of aerobic capacity and muscle strength to perform on-duty tasks in a safe and efficient manner, considering age and gender. We aimed to evaluate the fitness levels of Hamilton firefighters, and to determine the effects of age and gender. Methods. In total, 89 participants were recruited. The modified Canadian aerobic fitness test was used to determine participants’ estimated maximal oxygen consumption (V_O2max) levels. For upper and lower body strength levels, a calibrated J-Tech hand-held dynamometer and a National Institute for Occupational Safety and Health (NIOSH) lifting device was used respectively. Results. Firefighters’ mean (SD) V_O2max level was 40.30?±?6.25?ml·kg^?1·min^?1. Age proved to have a statistically significant impact on V_O2max (p?<?0.001). Gender displayed statistically significant effects on strength levels. Firefighters’ age was the only statistically significant independent variable, and accounted for 61.00% of the variance in firefighters’ aerobic capacity levels. Conclusions. Firefighters possessed somewhat similar aerobic capacities but much higher levels of body strength when compared with the general population. With age, firefighters’ aerobic capacities decreased; however, their upper and lower body strength levels remained the same.     

Sensitivity of Head and Cervical Spine Injury Measures to Impact Factors Relevant to Rollover Crashes

Objective: Serious head and cervical spine injuries have been shown to occur mostly independent of one another in pure rollover crashes. In an attempt to define a dynamic rollover crash test protocol that can replicate serious injuries to the head and cervical spine, it is important to understand the conditions that are likely to produce serious injuries to these 2 body regions. The objective of this research is to analyze the effect that impact factors relevant to a rollover crash have on the injury metrics of the head and cervical spine, with a specific interest in the differentiation between independent injuries and those that are predicted to occur concomitantly.

Methods: A series of head impacts was simulated using a detailed finite element model of the human body, the Total HUman Model for Safety (THUMS), in which the impactor velocity, displacement, and direction were varied. The performance of the model was assessed against available experimental tests performed under comparable conditions. Indirect, kinematic-based, and direct, tissue-level, injury metrics were used to assess the likelihood of serious injuries to the head and cervical spine.

Results: The performance of the THUMS head and spine in reconstructed experimental impacts compared well to reported values. All impact factors were significantly associated with injury measures for both the head and cervical spine. Increases in impact velocity and displacement resulted in increases in nearly all injury measures, whereas impactor orientation had opposite effects on brain and cervical spine injury metrics. The greatest cervical spine injury measures were recorded in an impact with a 15° anterior orientation. The greatest brain injury measures occurred when the impactor was at its maximum (45°) angle.

Conclusions: The overall kinetic and kinematic response of the THUMS head and cervical spine in reconstructed experiment conditions compare well with reported values, although the occurrence of fractures was overpredicted. The trends in predicted head and cervical spine injury measures were analyzed for 90 simulated impact conditions. Impactor orientation was the only factor that could potentially explain the isolated nature of serious head and spine injuries under rollover crash conditions. The opposing trends of injury measures for the brain and cervical spine indicate that it is unlikely to reproduce the injuries simultaneously in a dynamic rollover test.