83rd Annual Meeting & Exhibition

Abstract

The estimation of odor production and dispersion from landfill sites is a very complicated task because of the different chemical species that exist in biogas. To site a new landfill, it is necessary to know the distance that odors can travel around the landfill under atmospheric conditions that increase the concentration of pollutants. Although CH₄ is an odorless gas, it can be used as an index to determine the dispersion of low-reactivity odorous species around a landfill site. Methane production rates, estimated by biogas production models, were used by an air dispersion model to determine the spatial distribution of CH₄ around landfill sites. By utilizing dispersion models under extreme atmospheric conditions, a maximum CH₄ concentration around the landfills was determined. Based on the ratio between CH₄ and odorous chemical species, the spatial distribution of the concentration of an odorous species was determined for those species with low reactivity in the atmosphere. For odorous species with high reactivity in the atmosphere, a dispersion-reaction model must be used. In this way, the acceptable distance between new landfills and residential areas can be determined. The proposed methodology could be used as a design tool for those who are interested in landfill siting.     

A methodology to estimate odors around landfill sites: the use of methane as an odor index and its utility in landfill siting

The estimation of odor production and dispersion from landfill sites is a very complicated task because of the different chemical species that exist in biogas. To site a new landfill, it is necessary to know the distance that odors can travel around the landfill under atmospheric conditions that increase the concentration of pollutants. Although CH4 is an odorless gas, it can be used as an index to determine the dispersion of low-reactivity odorous species around a landfill site. Methane production rates, estimated by biogas production models, were used by an air dispersion model to determine the spatial distribution of CH4 around landfill sites. By utilizing dispersion models under extreme atmospheric conditions, a maximum CH4 concentration around the landfills was determined. Based on the ratio between CH4 and odorous chemical species, the spatial distribution of the concentration of an odorous species was determined for those species with low reactivity in the atmosphere. For odorous species with high reactivity in the atmosphere, a dispersion-reaction model must be used. In this way, the acceptable distance between new landfills and residential areas can be determined. The proposed methodology could be used as a design tool for those who are interested in landfill siting.     

Modeling Short Range Air Dispersion from Area Sources of Non-buoyant Toxics

A model based on K-theory has been developed for describing the short range air dispersion from area sources of non-buoyant toxics. Model parameter estimation is via boundary layer theory. Lateral dispersion by plume meander is considered but ail other sources of horizontal dispersion are neglected. The model can be applied on and near area sources and it can be adapted for predictions of downwind concentrations with a wide variety of meteorological Inputs.

The model has been evaluated by simulating the data obtained during atmospheric tracer studies and by comparison to vinyl chloride concentrations near the BKK landfill in southern California. The model appears to represent a useful and accurate tool for regulatory planning and risk assessment close to area sources of toxics.     

Spray irrigation of landfill leachate: estimating potential exposures to workers and bystanders using a modified air box model and generalised source term

Generalised source term data from UK leachates and a probabilistic exposure model (BPRISC(4)) were used to evaluate key routes of exposure from chemicals of concern during the spraying irrigation of landfill leachate. Risk estimates secured using a modified air box model are reported for a hypothetical worker exposed to selected chemicals within a generalised conceptual exposure model of spray irrigation. Consistent with pesticide spray exposure studies, the key risk driver is dermal exposure to the more toxic components of leachate. Changes in spray droplet diameter (0.02-0.2 cm) and in spray flow rate (50-1000 l/min) have little influence on dermal exposure, although the lesser routes of aerosol ingestion and inhalation are markedly affected. The risk estimates modelled using this conservative worst case exposure scenario are not of sufficient magnitude to warrant major concerns about chemical risks to workers or bystanders from this practice in the general sense. However, the modelling made use of generic concentration data for only a limited number of potential landfill leachate contaminants, such that individual practices may require assessment on the basis of their own merits.     

An Atmospheric Dispersion Model for the Environmental Impact Assessment of Thermal Power Plants in Japan—A Method for Evaluating Topographical Effects

Abstract

An atmospheric dispersion model was developed for the environmental impact assessment of thermal power plants in Japan, and a method for evaluating topographical effects using this model was proposed. The atmospheric dispersion model consists of an airflow model with a turbulence closure model based on the algebraic Reynolds stress model and a Lagrangian particle dispersion model (LPDM). The evaluation of the maximum concentration of air pollutants such as SO₂, NO_x, and suspended particulate matter is usually considered of primary importance for environmental impact assessment. Three indices were therefore estimated by the atmospheric dispersion model: the ratios (α and β, respectively) of the maximum concentration and the distance of the point of the maximum concentration from the source over topography to the respective values over a flat plane, and the relative concentration distribution [γ(x)] along the ground surface projection of the plume axis normalized by the maximum concentration over a flat plane. The atmospheric dispersion model was applied to the topography around a power plant with a maximum elevation of more than 1000 m. The values of α and β evaluated by the atmospheric dispersion model varied between 1 and 3 and between 1 and 0.4, respectively, depending on the topographical features. These results and the calculated distributions of γ(x) were highly similar to the results of the wind tunnel experiment. Therefore, when the slope of a hill or mountain is similar to the topography considered in this study, it is possible to evaluate topographical effects on exhaust gas dispersion with reasonable accuracy using the atmospheric dispersion model as well as wind tunnel experiments.     

An atmospheric dispersion model for the environmental impact assessment of thermal power plants in Japan--a method for evaluating topographical effects

An atmospheric dispersion model was developed for the environmental impact assessment of thermal power plants in Japan, and a method for evaluating topographical effects using this model was proposed. The atmospheric dispersion model consists of an airflow model with a turbulence closure model based on the algebraic Reynolds stress model and a Lagrangian particle dispersion model (LPDM). The evaluation of the maximum concentration of air pollutants such as SO2, NOx, and suspended particulate matter is usually considered of primary importance for environmental impact assessment. Three indices were therefore estimated by the atmospheric dispersion model: the ratios (alpha and beta, respectively) of the maximum concentration and the distance of the point of the maximum concentration from the source over topography to the respective values over a flat plane, and the relative concentration distribution [gamma(x)] along the ground surface projection of the plume axis normalized by the maximum concentration over a flat plane. The atmospheric dispersion model was applied to the topography around a power plant with a maximum elevation of more than 1,000 m. The values of alpha and beta evaluated by the atmospheric dispersion model varied between 1 and 3 and between 1 and 0.4, respectively, depending on the topographical features. These results and the calculated distributions of y(x) were highly similar to the results of the wind tunnel experiment. Therefore, when the slope of a hill or mountain is similar to the topography considered in this study, it is possible to evaluate topographical effects on exhaust gas dispersion with reasonable accuracy using the atmospheric dispersion model as well as wind tunnel experiments.     

Development of a GIS-based decision support system for urban air quality management in the city of Istanbul

A decision support system has been developed for urban air quality management in the metropolitan area of Istanbul. The system is based on CALMET/CALPUFF dispersion modeling system, digital maps, and related databases to estimate the emissions and spatial distribution of air pollutants with the help of a GIS software. The system estimates ambient air pollution levels at high temporal and spatial resolutions and enables mapping of emissions and air quality levels. Mapping and scenario results can be compared with air quality limits. Impact assessment of air pollution abatement measures can also be carried out.     

Airborne emissions of mercury from municipal solid waste. I: new measurements from six operating landfills in Florida

Mercury-bearing material enters municipal landfills from a wide array of sources, including fluorescent lights, batteries, electrical switches, thermometers, and general waste; however, the fate of mercury (Hg) in landfills has not been widely studied. Using automated flux chambers and downwind atmospheric sampling, we quantified the primary pathways of Hg vapor releases to the atmosphere at six municipal landfill operations in Florida. These pathways included landfill gas (LFG) releases from active vent systems, passive emissions from landfill surface covers, and emissions from daily activities at each working face (WF). We spiked the WF at two sites with known Hg sources; these were readily detected downwind, and were used to test our emission modeling approaches. Gaseous elemental mercury (Hg(O)) was released to the atmosphere at readily detectable rates from all sources measured; rates ranged from approximately 1-10 ng m(-2) hr(-1) over aged landfill cover, from approximately 8-20 mg/hr from LFG flares (LFG included Hg(O) at microg/m3 concentrations), and from approximately 200-400 mg/hr at the WF. These fluxes exceed our earlier published estimates. Attempts to identify specific Hg sources in excavated and sorted waste indicated few readily identifiable sources; because of effective mixing and diffusion of Hg(O), the entire waste mass acts as a source. We estimate that atmospheric Hg releases from municipal landfill operations in the state of Florida are on the order of 10-50 kg/yr, substantially larger than our original estimates, but still a small fraction of current overall anthropogenic losses.     

Managing emissions from highly industrialized areas: Regulatory compliance under uncertainty

The use of regulatory and compliance-based modeling for air quality impact assessment is invariably relied upon to predict future air quality under various management scenarios particularly where air quality monitoring data are limited. This paper examines the dispersion from a multi-stack cement manufacturing complex with associated quarries and transport activities for regulatory compliance under uncertain emission and meteorological conditions. The concentrations of CO, NO_x, SO₂ and PM at sensitive receptor locations were used as indicators in comparison to World Health Organization (WHO) interim guidelines. Exceedance exposure areas were delineated under bounded uncertainties in input emission factors and meteorological parameters. Planning and management initiatives were tested to control/minimize potential exposure. Compared to the case of low emissions and actual meteorological conditions, the consideration of worst emissions coupled to worst meteorological conditions enlarged the boundaries of the exceedance exposure areas considerably. The implementation of best available technologies and enforcement of emission standards improved air quality in the region significantly and lowered the exposure at many population centers to below health standards. Uncertainty in the output of atmospheric dispersion models continues to play a significant role to be considered at the point where science is translated into political decision making.     

Estimated long-term outdoor air pollution concentrations in a cohort study

Several recent studies associated long-term exposure to air pollution with increased mortality. An ongoing cohort study, the Netherlands Cohort Study on Diet and Cancer (NLCS), was used to study the association between long-term exposure to traffic-related air pollution and mortality. Following on a previous exposure assessment study in the NLCS, we improved the exposure assessment methods.Long-term exposure to nitrogen dioxide (NO₂), nitrogen oxide (NO), black smoke (BS), and sulphur dioxide (SO₂) was estimated. Exposure at each home address (N=21 868) was considered as a function of a regional, an urban and a local component. The regional component was estimated using inverse distance weighed interpolation of measurement data from regional background sites in a national monitoring network. Regression models with urban concentrations as dependent variables, and number of inhabitants in different buffers and land use variables, derived with a Geographic Information System (GIS), as predictor variables were used to estimate the urban component. The local component was assessed using a GIS and a digital road network with linked traffic intensities. Traffic intensity on the nearest road and on the nearest major road, and the sum of traffic intensity in a buffer of 100 m around each home address were assessed. Further, a quantitative estimate of the local component was estimated.The regression models to estimate the urban component explained 67%, 46%, 49% and 35% of the variances of NO₂, NO, BS, and SO₂ concentrations, respectively. Overall regression models which incorporated the regional, urban and local component explained 84%, 44%, 59% and 56% of the variability in concentrations for NO₂, NO, BS and SO₂, respectively.We were able to develop an exposure assessment model using GIS methods and traffic intensities that explained a large part of the variations in outdoor air pollution concentrations.     

The Estimation of Personal Exposures to Air Pollutants for a Community-Based Study of Health Effects in Asthmatics—Exposure Model

Estimates of individual personal exposures to ozone, nitrogen dioxide, pollen, temperature, and relative humidity for a group of asthmatics participating In a health effects study were obtained by means of a modeling approach utilizing fixed site monitoring data, regression relationships between fixed site and indoor and outdoor micro-environment concentrations, study subject activity patterns, and study household characteristics. A considerable improvement in the accuracy of exposure assessment using the exposure model instead of fixed site measurements alone was demonstrated for ozone. This large refinement of ozone exposure estimates was achieved using a simplified approach which emphasized the large differences between Indoor and outdoor micro-environmental concentrations, and assumed relatively little heterogeneity in exposure within either of these two broad micro-environmental categories. Major sources of error in the exposure model for ozone Include: failure to Include Indoor microenvironments with no air conditioning in the development of the model, Inability to accurately apportion within-hour time spent in different microenvironments, and misclassification of hour-specific personal location by study subjects.     

Airborne Emissions of Mercury from Municipal Solid Waste. I: New Measurements from Six Operating Landfills in Florida

Abstract

Mercury-bearing material enters municipal landfills from a wide array of sources, including fluorescent lights, batteries, electrical switches, thermometers, and general waste; however, the fate of mercury (Hg) in landfills has not been widely studied. Using automated flux chambers and downwind atmospheric sampling, we quantified the primary pathways of Hg vapor releases to the atmosphere at six municipal landfill operations in Florida. These pathways included landfill gas (LFG) releases from active vent systems, passive emissions from landfill surface covers, and emissions from daily activities at each working face (WF). We spiked the WF at two sites with known Hg sources; these were readily detected downwind, and were used to test our emission modeling approaches. Gaseous elemental mercury (Hg⁰) was released to the atmosphere at readily detectable rates from all sources measured; rates ranged from ～1–10 ng m^?2 hr^?1 over aged landfill cover, from ～8–20 mg/hr from LFG flares (LFG included Hg⁰ at μg/m³ concentrations), and from ～200–400 mg/hr at the WF. These fluxes exceed our earlier published estimates. Attempts to identify specific Hg sources in excavated and sorted waste indicated few readily identifiable sources; because of effective mixing and diffusion of Hg⁰, the entire waste mass acts as a source. We estimate that atmospheric Hg releases from municipal landfill operations in the state of Florida are on the order of 10–50 kg/yr, substantially larger than our original estimates, but still a small fraction of current overall anthropogenic losses.     

Air Pollution Directional Risk Assessment for Siting a Landfill

Abstract

Air pollution directional risk (APDR) is an essential factor to be assessed when selecting an appropriate landfill site. Because air pollutants generated from a landfill are diffused and transported by wind in different directions and speeds, areas surrounding the landfill will be subject to different associated risks, depending on their relative position from the landfill. This study assesses potential APDRs imposed from a candidate landfill site on its adjacent areas on the basis of the pollutant distribution simulated by a dispersion model, wind directions and speeds from meteorological monitoring data, and population density. A pollutant distribution map layer was created using a geographic information system and layered onto a population density map to obtain an APDR map layer. The risk map layer was then used in this study to evaluate the suitability of a candidate site for placing a landfill. The efficacy of the proposed procedure was demonstrated for a siting problem in central Taiwan, Republic of China.     

Real-time measurements of landfill atmospheric ammonia using mobile white cell differential optical absorption spectroscopy system and engineering applications

ABSTRACT

The real-time measurement of atmospheric ammonia at municipal solid waste (MSW) landfills and adjacent areas is necessary for landfill management and the health of nearby residence. Continuous, fast, and real-time monitoring of landfill odor gases is a challenge, especially for ammonia. To our knowledge, this was the first study for the characteristics and seasonal variabilities of atmospheric ammonia at a whole landfill using a Mobile White cell Differential Optical Absorption Spectroscopy (MW-DOAS) system, which also simultaneously offers high sensitivity and fast response. Results show that atmospheric ammonia levels at various landfill areas were significantly dependent on the characteristics of areas, such as municipal solid waste-related areas, leachate-related areas, sludge-related areas, and fly ash-related area, the atmospheric ammonia peak or average level at the active leachate pool of the active MSW site was the highest among all areas of the whole landfill, and the ammonia concentrations at the closed MSW landfill sites were low and dependent on the ages. Moreover, it was found that the seasonal variabilities of ammonia concentrations at most of those areas were significantly dependent on the ambient temperature, and ambient temperature variation caused the atmospheric ammonia level at the active leachate pool and active MSW landfill site in the summer survey to raise 3.5 times and 5.58 times than in the winter survey, respectively.

Implications: Continuous, fast, and real-time monitoring ambient ammonia at or nearby a landfill is critical for landfill operators and local EPAs. This study demonstrates that the mobile White cell Differential Optical Absorption Spectroscopy (MW-DOAS) system is an effective tool for real-time monitoring ambient ammonia of a whole landfill. The results in this article provided a guideline to the characteristics and seasonal changes of ambient ammonia at various types of areas of a whole landfill as well as the impact of age to ambient ammonia at the closed landfill areas.     

Comparing estimates of fugitive landfill methane emissions using inverse plume modeling obtained with Surface Emission Monitoring (SEM), Drone Emission Monitoring (DEM), and Downwind Plume Emission Monitoring (DWPEM)

ABSTRACT

As part of the global effort to quantify and manage anthropogenic greenhouse gas emissions, there is considerable interest in quantifying methane emissions in municipal solid waste landfills. A variety of analytical and experimental methods are currently in use for this task. In this paper, an optimization-based estimation method is employed to assess fugitive landfill methane emissions. The method combines inverse plume modeling with ambient air methane concentration measurements. Three different measurement approaches are tested and compared. The method is combined with surface emission monitoring (SEM), above ground drone emission monitoring (DEM), and downwind plume emission monitoring (DWPEM). The methodology is first trialed and validated using synthetic datasets in a hand-generated case study. A field study is also presented where SEM, DEM and DWPEM are tested and compared. Methane flux during two-days measurement campaign was estimated to be between 228 and 350 g/s depending on the type of measurements used. Compared to SEM, using unmanned aerial systems (UAS) allows for a rapid and comprehensive coverage of the site. However, as showed through this work, advancement of DEM-based methane sampling is governed by the advances that could be made in UAS-compatible measurement instrumentations. Downwind plume emission monitoring led to a smaller estimated flux compared with SEM and DEM without information about positions of major leak points in the landfill. Even though, the method is simple and rapid for landfill methane screening. Finally, the optimization-based methodology originally developed for SEM, shows promising results when it is combined with the drone-based collected data and downwind concentration measurements. The studied cases also discovered the limitations of the studied sampling strategies which is exploited to identify improvement strategies and recommendations for a more efficient assessment of fugitive landfill methane emissions.

Implications: Fugitive landfill methane emission estimation is tackled in the present study. An optimization-based method combined with inverse plume modeling is employed to treat data from surface emission monitoring, drone-based emission monitoring and downwind plume emission monitoring. The study helped revealing the advantages and the limitations of the studied sampling strategies. Recommendations for an efficient assessment of landfill methane emissions are formulated. The method trialed in this study for fugitive landfill methane emission could also be appropriate for rapid screening of analogous greenhouse gas emission hotspots.     

非规范生活垃圾填埋场填埋气横向迁移规律及控制

我国城市中尚有大量非规范生活垃圾填埋场存在,对其进行污染整治消除填埋气导致的环境安全隐患刻不容缓.以重庆某垃圾填埋场为例,研究重庆市主城区的非规范生活垃圾填埋场填埋气的横向迁移问题,在垃圾场周边区域布设36个监测井,对监测井中的填埋气进行分析监测,以填埋气特征组分CH4气体的体积浓度变化研究填埋气的横向迁移规律.结果表明,监测井到填埋场边界的距离为监测井中CH4气体浓度的主要影响因素;垃圾场周边距离填埋场场界50 m以外的区域,填埋气的横向迁移已经相当微弱;但是距离填埋场边界50 m以内区域的填埋气的横向迁移明显,需要在距离填埋场边界50 m范围内采取措施与场内填埋气的导排措施配合,进行填埋气的污染控制.     

Spatially differentiated and source-specific population exposure to ambient urban air pollution

Models assessing exposure to air pollution often focus on macro-scale estimates of exposure to all types of sources for a particular pollutant across an urban study area. While results based on these models may aid policy makers in identifying larger areas of elevated exposure risk, they often do not differentiate the proportion of population exposure attributable to different polluting sources (e.g. traffic or industrial). In this paper, we introduce a population exposure modeling system that integrates air dispersion modeling, Geographic Information Systems (GIS), and population exposure techniques to spatially characterize a source-specific exposure to ambient air pollution for an entire urban population at a fine geographical scale. By area, total population exposure in Dallas County in 2000 was more attributable to vehicle polluting sources than industrial polluting sources at all levels of exposure. Population exposure was moderately correlated with vehicle sources (r = 0.440, p < 0.001) and weakly with industrial sources (r = 0.069, p = 0.004). Population density was strongly correlated with total exposure (r = 0.896, p < 0.001) but was not significantly correlated with individual or combined sources. The results of this study indicate that air quality assessments must incorporate more than industrial or vehicle polluting sources-based population exposure values alone, but should consider multiple sources. The population exposure modeling system proposed in this study shows promise for use by municipal authorities, policy makers, and epidemiologists in evaluating and controlling the quality of the air in the process of urban planning and mitigation measures.     

Frank A. Chambers

Abstract

This work assessed the usefulness of a current air quality model (American Meteorological Society/Environmental Protection Agency Regulatory Model [AERMOD]) for predicting air concentrations and deposition of perfluorooctanoate (PFO) near a manufacturing facility. Air quality models play an important role in providing information for verifying permitting conditions and for exposure assessment purposes. It is important to ensure traditional modeling approaches are applicable to perfluorinated compounds, which are known to have unusual properties. Measured field data were compared with modeling predictions to show that AERMOD adequately located the maximum air concentration in the study area, provided representative or conservative air concentration estimates, and demonstrated bias and scatter not significantly different than that reported for other compounds. Surface soil/grass concentrations resulting from modeled deposition flux also showed acceptable bias and scatter compared with measured concentrations of PFO in soil/grass samples. Errors in predictions of air concentrations or deposition may be best explained by meteorological input uncertainty and conservatism in the PRIME algorithm used to account for building downwash. In general, AERMOD was found to be a useful screening tool for modeling the dispersion and deposition of PFO in air near a manufacturing facility.     

Rationale for assessment of risk from exposure to 2,3,7,8-TCDD

The human health risk assessment is supported by methodology for utilizing toxic effects in animals consisting of carcinogenic and noncarcinogenic responses as a result of chronic, subchronic and acute exposures. One of the initial steps in a risk assessment activity involves the estimation of exposure levels. These estimates are typically based on either direct environmental measurements or predictions obtained from fate and transport models. The decision to develop assessment of risk from chronic exposure based on a nonthreshold model is made if a chemical demonstrates carcinogenic activity in animal bioassays and/or in human epidemiological studies. In the absence of any positive human epidemiologic data, it is assumed that a substance which induces a statistically significant carcinogenic response in animals has the probability to cause cancer in humans. The carcinogenic potential of 2,3,7,8-TCDD has been established based on chronic exposure in rodents. In addition, 2,3,7,8-TCDD has also been shown to be a liver cancer promoter in rodents. In the risk assessment on dioxins based on chronic exposure in experimental animals, 2,3,7,8-TCDD is regarded as a carcinogenic substance. Carcinogenic data from animal bioassays are utilized for the assessment of risk for the purpose of estimating the likelihood of 2,3,7,8-TCDD being carcinogenic for humans and to determine the magnitude of the potential impact on public health.     

Modeling the intra-urban variability of outdoor traffic pollution in Oslo,Norway—A GA2LEN project

Traffic is a major source of air pollutants in urban environments, and exposure to these pollutants may be associated with adverse health effects. However, inconsistencies in observational epidemiological studies may be caused by differential measurement errors in various approaches in assessing exposure.We aimed to evaluate a simple method for assessing outdoor air pollutant concentrations in Oslo, Norway, through a land-use regression method.Samples of nitrogen oxides (NO_x) were collected in two different weeks using Ogawa passive diffusion samplers simultaneously at 80 locations across Oslo. Independent variables used in subsequent regression models as predictors of the pollutants were derived using the Arc 9 geographic information system (GIS) software. Indicators of land use, traffic, population density, and physical geography were tested.The final regression model yielded an adjusted coefficient of determination (R²) of 0.77 for nitrogen dioxide (NO₂), 0.66 for nitric oxide (NO), and 0.73 for NO_x.The results suggest that a good predictive exposure model can be derived from this approach, which can be used to estimate long-term small-area variation in concentrations for individual exposure assessment in epidemiological studies in a highly cost-effective way. These small-area variations in traffic pollution are important since they may have associations with health effects.