The IMPROVE_A temperature protocol for thermal/optical carbon analysis: maintaining consistency with a long-term database

Thermally derived carbon fractions including organic carbon (OC) and elemental carbon (EC) have been reported for the U.S. Interagency Monitoring of PROtected Visual Environments (IMPROVE) network since 1987 and have been found useful in source apportionment studies and to evaluate quartz-fiber filter adsorption of organic vapors. The IMPROVE_A temperature protocol defines temperature plateaus for thermally derived carbon fractions of 140 degrees C for OC1, 280 degrees C for OC2, 480 degrees C for OC3, and 580 degrees C for OC4 in a helium (He) carrier gas and 580 degrees C for EC1, 740 degrees C for EC2, and 840 degrees C for EC3 in a 98% He/2% oxygen (O2) carrier gas. These temperatures differ from those used previously because new hardware used for the IMPROVE thermal/optical reflectance (IMPROVE_TOR) protocol better represents the sample temperature than did the old hardware. A newly developed temperature calibration method demonstrates that these temperatures better represent sample temperatures in the older units used to quantify IMPROVE carbon fractions from 1987 through 2004. Only the thermal fractions are affected by changes in temperature. The OC and EC by TOR are insensitive to the change in temperature protocol, and therefore the long-term consistency of the IMPROVE database is conserved. A method to detect small quantities of O2 in the pure He carrier gas shows that O2 levels above 100 ppmv also affect the comparability of thermal carbon fractions but have little effect on the IMPROVE_TOR split between OC and EC.     

Development of a High Purity Filter for High Temperature Particulate Sampling and Analysis

This paper is directed to those interested in measuring trace metals in high-temperature particulate emissions. Particulate handsheet filters with satisfactory purity, efficiency, thermal stability, cost, strength (about 1 lb/in.), and flexibility for analysis of particulates in gases up to 800°C have been made with 99.2% Si0₂ Microquartzfibers. Almost all purity requirements for optimum atomic absorption and flame emission spectrophotometric analysis for trace metals have been achieved. The filters appear highly promising for X-ray fluorescence analysis but should be further evaluated. Suitability of the filters for neutron activation analysis is uncertain and should also be further evaluated. Dioctyl phthal-ate (DOP) aerosol efficiencies of 99 to 99.99% have been achieved by using fibers of various diameters. The filters are insensitive to humidity, insoluble In most acids and organic solvents. The handsheet filters have a slightly alkaline pH, but similar filters have been made on a papermaking machine with a pH of 6.4. Cost is estimated to be about $2.00/ft².     

Apparatus for Simultaneous Size-Differentiated Sampling of Optical and Suboptical Aerosols: Application to Analysis of Nitrates and Sulfates

In recent years, the EPA has moved toward a risk assessment/risk reduction framework for making regulatory decisions. The Agency has taken a number of steps to assure the quality and consistency of the risk assessment component of those decisions. The first, and perhaps most important of these steps, is the development of Agency-wide risk assessment guidelines. Five guidelines have been published. They are: carcinogenicity, mutagenicity, developmental toxicity, chemical mixtures, and exposure. The provisions of the five guidelines are discussed in the context of the four components of risk assessment. Other activities designed to assure quality and consistency in risk assessments, reduce uncertainty in risk assessment, ensure a more efficient information exchange about risk and risk assessment, and develop the appropriate oversight mechanisms are also discussed. These include additional guidelines, the Risk Assessment Forum, risk assessment research, the Integrated Risk Information System, the Hazard Assessment Notification System, and the Risk Assessment Council.     

Carbon budgets for catchments across a managed landscape mosaic in southeast Sweden: contributing to the safety assessment of a nuclear waste repository

Ecosystem budgets of matter contribute to the assessment of transport and accumulation of bioavailable contaminants in a landscape, since flows of matter and energy ultimately determine the rates at which contaminants will be partitioned in the environment. This study compares ecosystem properties, such as net primary production (NPP), sequestration of matter and fluxes to food sources for humans, which are of potential interest to describe fluxes and accumulation of bioavailable radionuclides in 14 catchments within a larger catchment area in southeast Sweden. The carbon budgets, used as a proxy for organic matter, are mainly based on local estimates of pools and fluxes, which have been distributed across a landscape mosaic of different vegetation types and management regimes using a geographical information system (GIS). NPP varied by a factor close to two (432 - 709 g x Cx m(-2)x y(-1)), while net ecosystem production ranged between -124 and 159 gx C x m(-2) x y (-1) for the different catchments. Carbon sequestration mainly occurred in the vegetation while the soil organic carbon pool was mainly a source of carbon. Large herbivores consumed on average 4.5 % of the above-ground green tissue production. When arable land was present in the catchment, the flux of carbon to humans was highest from crops and, in decreasing order, milk and beef, followed by the flux from hunting and berry/fungus picking. The results can be used to estimate the potential assimilation of radionuclides in vegetation and the potential exposure to humans of bioavailable radionuclides.     

Carbon/nitrogen ratio as a major factor for predicting the effects of organic wastes on soil bacterial communities assessed by DNA-based molecular techniques

Background, aim, and scope  

Current Australian legislation permits the beneficial application of grease trap waste (GTW) to agricultural soil, viewing it as a beneficial source of organic matter and soil conditioner containing no/low amounts of metals or pathogenic organisms. However, little is known about the influence of GTW on soil bacterial community. A field experiment was established at Menangle in south western Sydney in Australia to quantitatively assess the impacts of different types (GTW CO and GTW CL) and amounts of GTW application on the soil bacterial community and diversity. Furthermore, a municipal solid waste (MSW) compost was simultaneously examined to compare against the other organic wastes. Knowledge about the shifts in microbial community structure and diversity following the applications of organic wastes could help to evaluate the ecological consequences on the soil and thus to develop sound regulatory guidelines for the beneficial reuse of organic wastes in agricultural lands.     

Coping with uncertainty: a call for a new science-policy forum

The scientific and policy worlds have different goals, which can lead to different standards for what constitutes "proof" of a change or phenomena, and different approaches for characterizing and conveying uncertainty and risk. These differences can compromise effective communication among scientists, policymakers, and the public, and constrain the types of socially compelling questions scientists are willing to address. In this paper, we review a set of approaches for dealing with uncertainty, and illustrate some of the errors that arise when science and policy fail to coordinate correctly. We offer a set of recommendations, including restructuring of science curricula and establishment of science-policy forums populated by leaders in both arenas, and specifically constituted to address problems of uncertainty.     

The Kitchen Factory: a training tool for Cleaner Production

Successful integration of Cleaner Production concepts and technologies into businesses and industries requires effective education and training of the professionals. Cleaner Production, in spite of its conceptual simplicity, implies a new way of thinking about processes and products and a more sustainable approach to problem solving. Teaching university students about Cleaner Production is particularly challenging because many concepts depend on tools and experiences that are difficult to recreate in the typical classroom. Full understanding of the methodology and concepts of a Cleaner Production assessment can be achieved only by engaging students in practical application. To overcome the difficulties of providing a high number of students with a practical application, a very simple and useful exercise, based on the activities performed in the average kitchen, has been developed. The kitchen at home has all the elements of a factory, is available to everybody and can be used to supplement the theory provided in the classroom     

Design approaches for a cycling adsorbent/photocatalyst system for indoor air purification: formaldehyde example

A kinetic model for a cycling adsorbent/photocatalyst combination for formaldehyde removal in indoor air (Chin et al. J. Catalysis 2006, 237, 29-37) was previously developed in our lab, demonstrating agreement with lab-scale batch operation data of other researchers (Shiraishi et al. Chem. Engineer. Sci. 2003, 58, 929-934). Model parameters evaluated included adsorption equilibrium and rate constants for the adsorbent (activated carbon) honeycomb rotor, and catalytic rate constant for pseudo-first-order formaldehyde destruction in the titanium dioxide photoreactor. This paper explores design consequences for this novel system. In particular, the batch parameter values are used to model both adsorbent and photocatalyst behavior for continuous operation in typical residential home challenges. Design variables, including realistic make-up air fraction, adsorbent honeycomb rotation speed, and formaldehyde source emission rate, are considered to evaluate the ability of the system to achieve World Health Organization pollutant guidelines. In all circumstances, the size of the required rotating adsorbent bed and photoreactor for single-stage operation and the resultant formaldehyde concentration in the home are calculated. The ability of how well such a system might be accommodated within the typical dimensions of commercial ventilation ducts is also considered.     

Design Approaches for a Cycling Adsorbent/Photocatalyst System for Indoor Air Purification: Formaldehyde Example

Abstract

A kinetic model for a cycling adsorbent/photocatalyst combination for formaldehyde removal in indoor air (Chin et al. J. Catalysis 2006, 237, 29-37) was previously developed in our lab, demonstrating agreement with lab-scale batch operation data of other researchers (Shiraishi et al. Chem. Engineer. Sci. 2003, 58, 929-934). Model parameters evaluated included adsorption equilibrium and rate constants for the adsorbent (activated carbon) honeycomb rotor, and catalytic rate constant for pseudo-first-order formaldehyde destruction in the titanium dioxide photoreactor. This paper explores design consequences for this novel system. In particular, the batch parameter values are used to model both adsorbent and photocatalyst behavior for continuous operation in typical residential home challenges. Design variables, including realistic make-up air fraction, adsorbent honeycomb rotation speed, and formaldehyde source emission rate, are considered to evaluate the ability of the system to achieve World Health Organization pollutant guidelines. In all circumstances, the size of the required rotating adsorbent bed and photoreactor for single-stage operation and the resultant formaldehyde concentration in the home are calculated. The ability of how well such a system might be accommodated within the typical dimensions of commercial ventilation ducts is also considered.     

The Development of a Charging/Collecting Device for High Resistivity Dust Using Cooled Electrodes

A charging/collecting device for high-resistivity fly ash has been developed which controls back ionization by cooling the collector electrode internally with water. The device consists of parallel 6.0 cm pipes with corona wires suspended between the pipes. The pipes provide a simple means of interfacing with a cooling water system and also minimizing the collector area needing to be cooled. By cooling the pipes with 38°C (100°F) water, back ionization is eliminated and average field strengths of 7 kV/cm can be achieved with fly ash having a resistivity > 10¹² ω-cm. Results of tests on an actual flue gas stream and plans for future testing are described. Initial tests using heated instead of cooled electrodes are described as well as other tests that lead to the present design. The results of tests with the heated electrode show the kind of improvements in performance that can be obtained when resistivity is controlled in only a small collection area.     

The possibility of the use of nitrogenous wastewaters as a medium for Stichococcus bacillaris

The possibility of the use of nitrogenous wastewaters as a medium for $\text{Stichococcus bacillaris}$ was investigated. The strain grew equally well in nitrogenous wastewaters as in synthetic medium and its productivity was affected mainly by concentration of ammonium nitrogen. The obtained results suggest that nitrogenous wastewaters could be used for large-scale cultures of $\text{S. bacillaris}$.     

Aerosol Measurement: The Use of Optical Light Scattering for the Determination of Particulate Size Distribution,and Particulate Mass,Including the Semi-Volatile Fraction

Abstract

The GRIMM model 1.107 monitor is designed to measure particle size distribution and particulate mass based on a light scattering measurement of individual particles in the sampled air. The design and operation of the instrument are described. Protocols used to convert the measured size number distribution to a mass concentration consistent with U.S. Environmental Protection Agency protocols for measuring particulate matter (PM) less than 10 μm (PM₁₀) and less than 2.5 μm (PM_2.5) in aerodynamic diameter are described. The performance of the resulting continuous monitor has been evaluated by comparing GRIMM monitor PM_2.5 measurements with results obtained by the Rupprecht and Patashnick Co. (R&P) filter dynamic measurement system (FDMS). Data were obtained during month-long studies in Rubidoux, CA, in July 2003 and in Fresno, CA, in December 2003. The results indicate that the GRIMM monitor does respond to total PM_2.5 mass, including the semi-volatile components, giving results comparable to the FDMS. The data also indicate that the monitor can be used to estimate water content of the fine particles. However, if the inlet to the monitor is heated, then the instrument measures only the nonvolatile material, more comparable to results obtained with a conventional heated filter tapered element oscillating microbalance (TEOM) monitor. A recent modification of the model 180, with a Nafion dryer at the inlet, measures total PM_2.5 including the nonvolatile and semi-volatile components, but excluding fine particulate water. Model 180 was in agreement with FDMS data obtained in Lindon, UT, during January through February 2007     

600 t/d新型污泥喷雾干化-焚烧 示范工程污染物去除效果

新型污泥喷雾干化-回转窑焚烧工艺是将脱水污泥通过雾化喷嘴形成滴雾后与高温烟气并流接触达到干化后再进行焚烧的集成技术.干化过程中湿污泥中有机物的挥发及该新型工艺的运行工况和污染物减排效果成为污泥处理处置领域关注的焦点.在对污泥喷雾干化焚烧工艺原理分析基础之上,对我国600 t/d新型污泥喷雾干化焚烧示范项目进行封闭式现场取样监测,通过成分分析、毒性监测等重点对污染物去除效果进行了研究,结果表明,该工艺通过自动控制可将出口烟气温度和干化污泥温度保持较稳定的状态,分别为(96±10)℃和(72±8)℃;喷雾干化塔内不存在粉尘爆炸危险,TVOC＜0.025 mg/m3;直接干化热利用率＞80％,优于间接干化;烟气排放口各指标均满足《生活垃圾焚烧污染控制标准》(GB18485-2001)的要求.     

Recycling/reuse of plastic waste as construction material for sustainable development: a review

Environmental Science and Pollution Research - The exponential rise in the production of plastic and the consequential surge in plastic waste have led the scientists and researchers look out for...     

The use of date palm as a potential adsorbent for wastewater treatment: a review

Background

In tropical countries, the palm tree is one of the most abundant and important trees. Date palm is a principal fruit grown in many regions of the world. It is abundant, locally available and effective material that could be used as an adsorbent for the removal of different pollutants from aqueous solution.

Review

This article presents a review on the role of date palm as adsorbents in the removal of unwanted materials such as acid and basic dyes, heavy metals, and phenolic compounds. Many studies on adsorption properties of various low cost adsorbent, such as agricultural waste and activated carbons based on agricultural waste have been reported in recent years.

Conclusion

Studies have shown that date palm-based adsorbents are the most promising adsorbents for removing unwanted materials. No previous review is available where researchers can get an overview of the adsorption capacities of date palm-based adsorbent used for the adsorption of different pollutants. This review provides the recent literature demonstrating the usefulness of date palm biomass-based adsorbents in the adsorption of various pollutants.     

The use of Odonata species for environmental assessment: a meta-analysis for the Neotropical region

Environmental Science and Pollution Research - The order Odonata has been regularly used as an indicator of the ecosystem’s condition. The objective of this review was to analyze the...     

The boosted activity of AgI/BiOI nanocatalyst: a RSM study towards Eriochrome Black T photodegradation

Environmental Science and Pollution Research - Nowadays, critical environmental pollution needs some novel, simple, effective, and cost-effective catalysts with high efficiency in the visible...     

The degradation of dissolved organic nitrogen associated with melanoidin using a UV/H2O2 AOP

The aim of this study was to examine the simultaneous degradation of dissolved organic nitrogen (DON) and associated colour from wastewater containing melanoidins by an advanced oxidation process (AOP). UV irradiation of H2O2 was used as the mechanism to create the hydroxyl radical for oxidation. Melanoidins are large nitrogenous organic compounds that are refractory during biological wastewater treatment processes. The simultaneous degradation of DON and colour, present as a result of these compounds, was investigated using an AOP. The oxidation process was much more capable of removing colour (99% degradation), dissolved organic carbon (DOC) (50% degradation) and DON (25% degradation) at the optimal applied dose of hydrogen peroxide for the system (3300 mg l(-1)). This indicated that colour and DON removal were decoupled problems for the purpose of treating melanoidin by an AOP and thus colour removal can not be used as an indication of DON removal Colour was caused by organic molecules with molecular weight greater than 10 kDa. Oxidation caused a partial reduction of the DON (41-15% of the total dissolved nitrogen) and DOC (29-14% of the DOC) associated with the large molecular weight fraction (>10 kDa) and almost complete colour removal (87-3% of the total colour). The degraded DON was mostly accounted for by the formation of ammonia (31% of the nitrogen removed from the large fraction) and small molecular weight compounds (66% of the nitrogen removed from the large fraction). The degraded DOC appeared to be mostly mineralised (to CO2) with only 20% of the degraded compounds appearing as small molecular weight DOC.     

Combined PCDD/F Destruction and Particulate Control in a Baghouse: Experience with a Catalytic Filter System at a Medical Waste Incineration Plant

ABSTRACT

Phoenix Services, Inc., owns and operates the Baltimore Regional Medical Waste Incinerator in Baltimore, MD. New regulations for dioxins and furans imposed a limit that was considerably below historical emission levels. To determine a method to comply with the new dioxin/furan regulations, Phoenix Services performed trials with powdered activated carbon (PAC). Although the results with carbon were acceptable, Phoenix Services decided to replace their woven fiberglass filter bags with catalytic filters that simultaneously destroy dioxins and furans and collect particulate matter (PM). The catalytic filter system offered several advantages to Phoenix Services, including destruction of dioxins and furans instead of adsorption on carbon. The catalytic filters also offered a passive solution that did not require new carbon injection equipment. In January 2000, a campaign to measure dioxins/furans and PM was undertaken.