Properties of several fly ash materials in relation to use as soil amendments

Fly ash samples from five power stations in Western Australia and Queensland, and two soils used for horticulture in Western Australia, were evaluated for a series of physical and chemical properties. Soils were comprised primarily of coarse sand-sized particles, whereas most of the fly ashes were primarily fine sand- and silt-sized particles. Hydraulic conductivities in the fly ashes were 105- to 248-fold slower than in the soils. The water-holding capacities of fly ashes at "field capacity" were three times higher than those of the soils. Extractable P in the fly ashes (except Tarong and Callide) were 20- to 88-fold higher than in the soils. The pH showed considerable variation among the different sources of fly ash, with samples from Muja being the most acidic (pH = 3.8; 1:5 in CaCl2 extract) and from Gladstone the most alkaline (pH = 9.9). The toxicity characteristic leaching procedure (TCLP) values indicate that the potential for release of trace elements from the fly ashes was well below regulatory levels. When applied at sufficient rates (e.g., to achieve 10% w/w in surface layers) to sandy soils, fly ash altered texture and increased water-holding capacity. Depending on the source of fly ash used, such amendments could also provide P and aid nutrient retention by increasing the phosphorus retention index (PRI) and/or cation exchange capacity (CEC). The considerable variability in physical and chemical properties among the fly ash samples evaluated in the present study supports the notion that field trials are essential to the future development of soil amendment strategies making use of any particular source of fly ash.     

我国南方某城市垃圾焚烧飞灰特性及固化/稳定化处置实验

我国南方某城市主要采用焚烧法处理生活垃圾,已建7个焚烧厂日产生飞灰量为101.62 t/d。文章分析了各个垃圾焚烧厂飞灰的化学组成和重金属浸出毒性,其主要成分为CaO、SiO2、MgO、Al2O3、Fe2O3、Na2O、SO3和Cl,所有焚烧飞灰都有至少一种重金属浸出浓度超标,属于危险废物。在飞灰处置出路亟待解决的背景下,实验探讨了飞灰稳定化工艺,结果表明10%的水泥添加量可以使飞灰中超标重金属(Cd、Pb和Zn)的浸出浓度满足危险废物鉴别浓度限值和安全填埋场入场浓度限值。同时,通过人体健康风险评价分析了飞灰豁免管理的可行性,并对近期和远期该城市焚烧厂飞灰的处理处置及管理提出建议。     

Leaching characteristics of solid wastes from thermal power plants of western Turkey and comparison of toxicity methodologies

Use of lignite in power generation has led to increasing environmental problems associated not only with gaseous emissions, but also with the disposal of ash residues. In particular, use of low quality coals with high ash content results in huge quantities of both fly and bottom ashes to be disposed of. A main problem related to coal ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies indicate that toxic trace metals may leach when fly and bottom ashes are in contact with water. In this study, fly and bottom ash samples obtained from thermal power plants, namely Yenikoy, Kemerkoy and Yatagan, located at the southwestern coast of Turkey, were subjected to toxicity tests such as the extraction (EP) and toxicity characteristic leaching (TCLP) procedures of the US Environmental Protection Agency (USEPA) and the so-called 'Method A' extraction procedure of the American Society of Testing and Material (ASTM). The geochemical composition of ash samples showed variations depending on the coal burned in the plants. Furthermore, the EP, TCLP and ASTM toxicity tests showed variations such that the ash samples were classified as 'toxic waste' based on EP and TCLP results whereas they were classified as 'non-toxic' based on ASTM results, indicating test results are pH dependent. When the extraction results were compared with the chemical composition of water samples obtained in the vicinity of the thermal power plants, it was found that the results obtained using the ASTM procedure cannot be used to predict subsurface contamination whereas the EP and TCLP procedures can be used.     

Evaluation of leachates from coal refuse blended with fly ash at different rates

There is great interest in returning coal combustion products to mining sites for beneficial reuse as liming agents. A column study examined the effects of blending two coal fly ashes with an acid-forming coal refuse (4% pyritic S). Both fly ashes were net alkaline, but had relatively low neutralizing capacities. One ash with moderate alkalinity (CRF) was bulk blended with coal refuse at 0, 20, and 33% (w/w), while another lower alkalinity ash (WVF) was blended at 0, 5, 10, 20, and 33% (w/w). The columns were leached (unsaturated) weekly with 2.5 cm of simulated precipitation for >150 wk. Where high amounts of ash alkalinity (>20% w/w) were mixed with the coal refuse, pyrite oxidation was controlled and leachate pH was >7.0 with low metal levels throughout the study. At lower rates of alkalinity loading, trace metals were sequentially released from the WVF ash as the 5, 10, and 20% treatments acidified due to pyrite oxidation. Lechate metals increased in proportion to the total amounts applied in the ash. In this strongly acidic environment, metals such as Mn, Fe, and Cu were dissolved and leached from the ash matrix in large quantities. If ash is to be beneficially reused in the reclamation of acid-producing coal refuse, the alkalinity and potential acidity of the materials must be balanced through the appropriate addition of lime or other alkaline materials to the blend. Highly potentially acidic refuse material, such as that used here, may not be suitable for ash/refuse codisposal scenarios.     

PHOSPHATE IN WATERS: I. REDUCTION USING NORTHERN LIGNITE FLY ASH1

Fly ashes fiom lignite coal fixed steam electric plants contain appreciable amounts of materials that can, in principle, decrease the phosphorus concentration in surface waters. Typical samples of un-weathered fly ash were used to test efficacies of removal of phosphorus from standard phosphate solutions and actual lake water samples. The effects of changing parameters such as contact time, pH, fly ash/water ratios, and solution temperature are presented. Water soluble and insoluble factors in the ash both appear to be reactive constituents. Trials with municipal waste waters showed near quantitative removal of ortho-phosphate.     

FACTORS INFLUENCING ACUTE TOXICfrY OF COAL ASH TO RAINBOW TROUT (SALMO GAIRDNERI) AND BLUEGILL SUNFISH (LEPOMIS MACROCHIRUS)1

ABSTRACT: The potentially toxic components in coal ash (ash particles, heavy metals) were evaluated in laboratory static, acute (96 hr) bioassays, both separately and in various combinations with extreme pH (5.0 and 8.5), using rainbow trout (Salmo gairdneri) and bluegifi sunfish (Lepomis macrochirus). Ash particle morphology and metal distribution anlaysis, using electron microscopy and surface-subsurface analysis by ion microscopy, showed that metals could be either clumped or evenly distributed on the surface of fly ash. Surface enrichment on fly ash particles from electrostatic precipitators, as measured by ion microscopy, was found for cadmium, copper, chromium, nickel, lead, mercury, titanium, arsenic, and selenium. Bottom (heavy) ash was not acutely toxic to either fish species at concentrations of up to 1500 mg/l total suspended solids (TSS) at pH 5.0, 7.5, or 8.5. Fly ash particles were not acutely toxic to blue-gill at levels up to 1360 mg/l TSS. Rainbow trout were highly sensitive to fly ash (25 to 60 percent mortality) at concentrations of 4.3 to 20.5 mg/I TSS when dissolved metal availability was high but were not sensitive at higher particulate concentrations (58 to 638 mg/I TSS) when dissolved metals were low. When metals were acid-leached from fly ash prior to testing, no rainbow trout mortality occurred at TSS concentrations of up to 2,350 mg/l TSS. When the percent of dissolved metal was high (e.g., 50–90 percent of the total), fish mortality was increased. Rainbow trout were nearly two orders of magnitude more sensitive than bluegill when subjected to a blend of cadmium, chromium, copper, nickel, lead, and zinc. The two species were similar in their acute sensitivity to acidic pH at levels at or below 4.0 and alkaline pH of 9.1. If the pH of coal ash effluent is contained within the range 6.0 to 9.0, acute toxicity to fish can be attributed to trace element availability from fly ash but not heavy ash. Control of holding pond and effluent pH and maximizing pond residence time are important strategies for minimizing effects of ash pond discharges on fish.     

Ash and deposit formation from oxy-coal combustion in a 100 kW test furnace

Ash deposition is still an unresolved problem when retrofitting existing air-fired coal power plants to oxy-fuel combustion. Experimental data are quite necessary for mechanism validation and model development. This work was designed to obtain laboratory combustor data on ash and deposits from oxy-coal combustion, and to explore the effects of oxy-firing on their formation. Two bituminous coals (Utah coal and Illinois coal) and one sub-bituminous coal (PRB coal) were burned on a down-fired combustor under both oxy- and air-firing. Two oxy-fired cases, i.e., 27 vol% O₂/73 vol% CO₂ and 32 vol% O₂/68 vol% CO₂, were selected to match the radiation flux and the adiabatic flame temperature of air combustion, respectively. Once-through CO₂ was used to simulate fully cleaned recycled flue gas. The flue gas excess oxygen was fixed at 3 vol%. For each case, both size-segregated fly ash and bulk fly ash samples were obtained. Simultaneously, ash deposits were collected on an especially designed un-cooled deposition probe. Ash particle size distributions and chemical composition of all samples were characterized. Data showed that oxy-firing had insignificant impacts on the tri-modal ash particle size distributions and composition size distributions in the size range studied. Bulk ash compositions also showed no significant differences between oxy- and air-firing, except for slightly higher sulfur contents in some oxy-fired ashes. The oxy-fired deposits were thicker than those from air-firing, suggesting enhanced ash deposition rates in oxy-firing. Oxy-firing also had apparent impacts on the deposit composition, especially for those components (e.g., CaO, Fe₂O₃, SO₃, etc.) that could contribute significantly to ash deposition. Based on these results, aerodynamic changes in gas flow and changes in combustion temperature seemed more important than chemical changes of ash particles in determining deposit behavior during oxy-coal combustion.     

Removal of Se(IV) from aqueous solution using sulphuric acid-treated peanut shell

A carbonaceous sorbent was prepared from peanut shell via sulphuric acid treatment. Se(IV) removal from aqueous solution on the sorbent was studied varying time, pH, Se(IV) concentration, temperature and sorbent status (wet and dry). Se(IV) removal was faster using the wet sorbent than the dry sorbent following a pseudo-first-order model. Se(IV) removal increases at low pH values, and decreases as pH increases until pH 7. Sorption was found to fit the Langmuir equation and sorption capacity for the wet sorbent was higher than that for the dry one. Both sorbents showed an increased selenium sorption by rising the temperature. Redox processes between Se(IV) and the carbon sorbent are involved. Analysis by scanning electron microscope and X-ray powder diffraction for the sorbent after the reaction with acidified Se(IV) confirmed the availability of elemental selenium as particles on the sorbent surface as a result of Se(IV) reduction. Physicochemical tests showed an increase in sorbent acidity, cation exchange capacity (CEC) and surface functionality after the reaction with acidified Se(IV), indicating the oxidation processes occurring on the sorbent surface. Due to its reduction properties, the sorbent seems efficient for Se(IV) removal from aqueous solution.     

A study of the extraction of vanadium and nickel in oil-fired fly ash

Annual production of oil-fired fly ash in Taiwan is approximately 43 000 tons, of this approximately 13 000 tons is electrostatically precipitated, the rest is cyclonically collected. Structurewise, both consist of porous unburned carbon, vanadium and nickel oxide, and water-soluble sulfate. Electrostatically precipitated fly ash contains large amounts of ammonium sulfate. If these ashes are not properly disposed of, they become environmental problems, such as dusting, leakage of acid liquids, and pollution with heavy metals. This paper discusses the experimental extraction of vanadium and nickel from oil-fired fly ash. The results indicated that leaching of oil-fired fly ash in 0.5 N of sulfuric acid led to an extraction of 65% vanadium, 60% nickel, and 42% iron, along with an increase in the concentration of sulfuric acid. When leached in 2 N sodium hydroxide solution, the extraction of vanadium was 80%, and the extraction of nickel was negligible. If leached in an ammonia water, the extraction of nickel increased, along with an increase in the concentration of ammonia in water. When leached with 4 N ammonia water, the extraction of nickel was 60%, the extraction of vanadium was less than that obtainable from leaching in sulfuric acid solution or in sodium hydroxide solution. If electrostatically precipitated fly ash was leached in a solution of 0.25 N ammonia water and 2 N ammonium sulfate, it would yield an extraction of 60% nickel and 8% vanadium—leading to a selective extraction of nickel. This study has established an extraction flowsheet in which fly ash was first leached in an ammoniacal solution containing ammonium sulfate to recover nickel. The leached residues were then leached in an alkaline solution to recover vanadium.     

Investigation of the uptake ability of fly ashes produced after lignite combustion

Fly ash samples from the five steam electric power stations of the Lignite Center of Western Macedonia were used in this study. They consisted mainly of anhydrite, lime, quartz and amorphous material as well as feldspars, calcite, micas + clays, portlandite and gehlenite which were all present in minor amounts. Anhydrite, lime and portlandite in the fly ash samples diminished upon treatment with ammonium acetate aqueous solution, whereas quartz, feldspars, gehlenite and amorphous material were enriched. The uptake ability of the fly ash samples ranged from 89 to 101 mequ./100g. The uptake ability of the samples was mainly attributed to the amorphous material and the microporous minerals, micas + clays. The amorphous material content was estimated at between 17 and 20 wt% in the treated fly ashes and may be unburned organic matter and amorphous inorganic material that resulted during the combustion of the lignite. A positive correlation was observed between the uptake ability and the total percentage of amorphous material and micas + clays. The relatively high uptake ability of the fly ash samples could lead to additional industrial and environmental uses of the fly ashes. The environmental advantage of fly ash exploitation will be particularly important for large electric power centers, such as the LCWM.     

Characterization of selenate removal from drainage water using rice straw

Removal of selenium (Se) from agricultural drainage water is very important for protecting wildlife in wetland systems. We conducted a series of experiments on selenite [Se(IV)] adsorption and selenate [Se(VI)] reduction to determine Se removal from drainage water amended with 1000 microg/L of Se(VI) or Se(IV) and 5 g of rice (Oryza sativa L.) straw. Under sterile conditions, the added Se(IV) was not adsorbed to the rice straw within 2 d of the experiment and the added Se(VI) was not reduced within 14 d. In contrast, added Se(VI) in a nonsterile rice-straw solution was reduced rapidly, from 930 microg/L at Day 3 to 20 microg/L at Day 5, with an increase in unprecipitated elemental Se [Se(0)] and total Se(0). In the last several days of the experiments, unprecipitated Se(0) was the major Se form in the rice-straw solution, with a small amount of organic Se(-II). This study showed that Se removal from drainage water in the presence of rice straw involves a two-step process. The first is the microbial reduction of Se(VI) to Se(IV) and then to colloidal Se(0). The second is flocculation and precipitation of colloidal Se(0) to the bottom of the experimental flasks and the surface of rice straw.     

Fly ash as a liming material for cotton

A field experiment was conducted to determine the effect of fly ash from a coal combustion electric power facility on soil acidity in a cotton (Gossypium hirsutum L.) field. Fresh fly ash was applied to a Bosket fine sandy loam (fine-loamy, mixed, thermic Mollic Hapludalf) soil with an initial soil pH(salt) of 4.8. The fly ash was equivalent to 42 g kg(-1) calcium carbonate with 97% passing through a 60 mesh (U.S. standard) sieve. Fly ash was applied one day before cotton planting in 1999 at 0, 3.4, 6.7, and 10.1 Mg ha(-1). No fly ash was applied in 2000. Within 60 d of fly ash application in 1999, all rates of fly ash significantly increased soil pH above 6.0. Manganese levels in cotton petioles were reduced significantly by 6.7 and 10.1 Mg ha(-1) of fly ash. Soil boron (B) and sodium (Na) concentrations were significantly increased with fly ash. In 1999, B in cotton leaves ranged from 72 to 84 mg kg(-1) in plots with fly ash applications. However, no visual symptoms of B toxicity in plants were observed. In 1999, cotton lint yield decreased on average 12 kg ha(-1) for each Mg of fly ash applied. In 2000, cotton yields were significantly greater for the residual 3.4 and 6.7 Mg fly ash ha(-1) plots than the untreated check. Due to the adverse yield effects measured in the first year following application, fly ash would not be a suitable soil amendment for cotton on this soil at this time.     

Strontium isotope study of coal utilization by-products interacting with environmental waters

Sequential leaching experiments on coal utilization by-products (CUB) were coupled with chemical and strontium (Sr) isotopic analyses to better understand the influence of coal type and combustion processes on CUB properties and the release of elements during interaction with environmental waters during disposal. Class C fly ash tended to release the highest quantity of minor and trace elements-including alkaline earth elements, sodium, chromium, copper, manganese, lead, titanium, and zinc-during sequential extraction, with bottom ash yielding the lowest. Strontium isotope ratios ((87)Sr/(86)Sr) in bulk-CUB samples (total dissolution of CUB) are generally higher in class F ash than in class C ash. Bulk-CUB ratios appear to be controlled by the geologic source of the mineral matter in the feed coal, and by Sr added during desulfurization treatments. Leachates of the CUB generally have Sr isotope ratios that are different than the bulk value, demonstrating that Sr was not isotopically homogenized during combustion. Variations in the Sr isotopic composition of CUB leachates were correlated with mobility of several major and trace elements; the data suggest that arsenic and lead are held in phases that contain the more radiogenic (high-(87)Sr/(86)Sr) component. A changing Sr isotope ratio of CUB-interacting waters in a disposal environment could forecast the release of certain strongly bound elements of environmental concern. This study lays the groundwork for the application of Sr isotopes as an environmental tracer for CUB-water interaction.     

Reclamation and revegetation of fly ash disposal sites - Challenges and research needs

Coal-fired power generation is a principal energy source throughout the world. Approximately, 70-75% of coal combustion residues are fly ash and its utilization worldwide is only slightly above 30%. The remainder is disposed of in landfills and fly ash basins. It is desirable to revegetate these sites for aesthetic purposes, to stabilize the surface ash against wind and water erosion and to reduce the quantity of water leaching through the deposit. Limitations to plant establishment and growth in fly ash can include a high pH (and consequent deficiencies of Fe, Mn, Cu, Zn and P), high soluble salts, toxic levels of elements such as B, pozzalanic properties of ash resulting in cemented/compacted layers and lack of microbial activity. An integrated organic/biotechnological approach to revegetation seems appropriate and should be investigated further. This would include incorporation of organic matter into the surface layer of ash, mycorrhizal inoculation of establishing vegetation and use of inoculated legumes to add N. Leaching losses from ash disposal sites are likely to be site-specific but a sparse number of studies have revealed enriched concentrations of elements such as Ca, Fe, Cd, Pb, and Sb in surrounding groundwater. This aspect deserves further study particularly in the longer-term. In addition, during weathering of the ash and deposition of organic matter during plant growth, a soil will form with properties vastly different to that of the parent ash. In turn, this will influence the effect that the disposal site has on the surrounding environment. Nevertheless, the effects of ash weathering and organic matter accumulation over time on the chemical, physical and biological properties of the developing ash-derived soil are not well understood and require further study.     

Impact of Coal Ash from Electric Power Production on Changes in Water Quality1

ABSTRACT: Since 1972 the use of coal in the U.S. has increased much more rapidly than predicted, with much of this increased use by electric power generating plants. Residue after combustion consists primarily of inorganic materials, with the majority of chemical elements concentrated in fly ash as is sulfate. The concentration of sulfate in this ash fraction most affects the chemical and physical state of other elements when fly ash comes in contact with water by lowering the pH. In a properly constructed and operated ash settling basin, however, major water quality parameters of effluent may be improved as compared to source water. It is necessary, however, to consider the solubility or deposition in sediment of potentially toxic chemical elements from fly ash as these may affect reuse of this water, or as they may impact other parts of the aquatic environment.     

Root penetration of sealing layers made of fly ash and sewage sludge

Fly ash and sewage sludge are suggested materials for constructing sealing layers covering mine tailings impoundments. Little is known, however, of their effect on vegetation or resistance to root penetration. We investigate: (i) the ability of different plant species to grow in sealing layers comprising fly ash and sewage sludge, (ii) the impact on plant growth of freshly hardened fly ash compared to aged and leached ash, and (iii) the plant stress response to fly ashes of different properties. A 6-mo greenhouse study using birch (Betula pendula Roth.), Scots pine (Pinus sylvestris L.), Kentucky bluegrass (Poa pratensis L.), and willow (Salix viminalis L.) demonstrated that no roots could grow into a compacted layer consisting only of ash, while a 6:4, ash-sludge mixture admitted roots into the upper part and a 1:9, ash-sludge mixture was totally penetrated (to 15 cm in depth) by roots of willow and Scots pine. Freshly hardened ash prevented root growth more effectively than aged ash did, as was observed in tests using reed canarygrass (Phalaris arundinacea L.) and pea (Pisum sativum L.). Furthermore, extracts of highly alkaline ash were more toxic to pea in a 48-h toxicity test than less alkaline ash was. However, stress responses to diluted ash extracts of lower pH, measured as enzyme capacities in dwarf bean (Phaseolus vulgaris L.), were more related to the metal and ion contents. Root penetration of sealing layers is most effectively prevented if little sewage sludge is added, and if ash of high alkalinity is chosen.     

Long-term evaluation of coal fly ash and mine tailings co-placement: A site-specific study

This study presents the results of a laboratory investigation conducted to evaluate the efficiency of coal fly ash to control the formation of acid mine drainage (AMD) from mine waste. Site-specific materials, coal fly ash from Atikokan Thermal Generating Station and mine tailings from Musselwhite mine, were mixed at different proportions for the investigation of the drainage chemistry and the optimal mix using static testing (acid–base accounting) and kinetic (column) testing. The acid–base accounting (ABA) results indicated that the fly ash possessed strong alkaline (neutralization) potential (NP) and could be used in the management of reactive mine tailings, thus ensuring prevention of AMD in the long-term. Column tests conducted in the laboratory to further investigate long-term performance of fly ash in the neutralization and prevention of acid mine drainage from tailings similarly showed that mixing fly ash with mine tailings reduces dissolution of many heavy metals from tailings by providing alkalinity to the system. It was found that a fly ash to tailings mass ratio equal to or greater than 15% can effectively prevent AMD generation from Musselwhite mine tailings in the co-placement approach.     

Leaching mechanisms of Cr(VI) from chromite ore processing residue

Batch leaching tests, qualitative and quantitative x-ray powder diffraction (XRPD) analyses, and geochemical modeling were used to investigate the leaching mechanisms of Cr(VI) from chromite ore processing residue (COPR) samples obtained from an urban area in Hudson County, New Jersey. The pH of the leaching solutions was adjusted to cover a wide range between 1 and 12.5. The concentration levels for total chromium (Cr) and Cr(VI) in the leaching solutions were virtually identical for pH values >5. For pH values <5, the concentration of total Cr exceeded that of Cr(VI) with the difference between the two attributed to Cr(III). Geochemical modeling results indicated that the solubility of Cr(VI) is controlled by Cr(VI)-hydrocalumite and Cr(VI)-ettringite at pH >10.5 and by adsorption at pH <8. However, experimental results suggested that Cr(VI) solubility is controlled partially by Cr(VI)-hydrocalumite at pH >10.5 and by hydrotalcites at pH >8 in addition to adsorption of anionic chromate species onto inherently present metal oxides and hydroxides at pH <8. As pH decreased to <10, most of the Cr(VI) bearing minerals become unstable and their dissolution contributes to the increase in Cr(VI) concentration in the leachate solution. At low pH ( <1.5), Cr(III) solid phases and the oxides responsible for Cr(VI) adsorption dissolve and release Cr(III) and Cr(VI) into solution.     

Bacterial diversity in selenium reduction of agricultural drainage water amended with rice straw

Bacterial reduction of the Se oxyanions selenate [Se(VI)] and selenite [Se(IV)] to elemental selenium [Se0] is an important biological process in removing Se from drainage water. This study was conducted to characterize the molecular diversity of bacterial populations involved in Se reduction of drainage water amended with rice (Oryza sativa L.) straw and also to monitor the bacterial community shifts during the course of the study. Selenate was removed in the drainage water by the bacteria 5 to 6 d after addition of rice straw. Six Se(VI)- and 32 Se(IV)-reducing bacteria were isolated from rice straw containing sterilized drainage water. Three Se(VI)- and two Se(IV)-reducing bacteria were also isolated from the drainage water. Identification of Se(VI)- and Se(IV)-reducing bacteria by 16S rDNA sequence analysis showed a broad phylogenetic diversity in Se-reducing assemblages. Three major phyla (Proteobacteria, Actinobacteria, and Firmicutes) of bacterial domain with numerous classes, orders, and families constituted the Se-reducing bacterial community. We documented changes in the composition of bacterial assemblages in the drainage water amended with rice straw using polymerase chain reaction (PCR)-denaturing gradient gel electrophoresis (DGGE) of 16S rDNA. The Shannon-Weaver index (H') revealed higher bacterial diversity at Day 6 in the sterilized and Day 4 in the non-sterilized drainage water amended with rice straw. The results of this study suggest that rice straw, a good source of carbon and energy, harbors a wide range of bacteria useful in Se reduction and may be used in removing Se from drainage water.     

Chemical and physical properties of dry flue gas desulfurization products

Beneficial and environmentally safe recycling of flue gas desulfurization (FGD) products requires detailed knowledge of their chemical and physical properties. We analyzed 59 dry FGD samples collected from 13 locations representing four major FGD scrubbing technologies. The chemistry of all samples was dominated by Ca, S, Al, Fe, and Si and strong preferential partitioning into the acid insoluble residue (i.e., coal ash residue) was observed for Al, Ba, Be, Cr, Fe, Li, K, Pb, Si, and V. Sulfur, Ca, and Mg occurred primarily in water- or acid-soluble forms associated with the sorbents or scrubber reaction products. Deionized water leachates (American Society for Testing and Materials [ASTM] method) and dilute acetic acid leachates (toxicity characteristic leaching procedure [TCLP] method) had mean pH values of >11.2 and high mean concentrations of S primarily as SO(2-)4 and Ca. Concentrations of Ag, As, Ba, Cd, Cr, Hg, Pb, and Se (except for ASTM Se in two samples) were below drinking water standards in both ASTM and TCLP leachates. Total toxicity equivalents (TEQ) of dioxins, for two FGD products used for mine reclamation, were 0.48 and 0.53 ng kg(-1). This was similar to the background level of the mine spoil (0.57 ng kg(-1)). The FGD materials were mostly uniform in particle size. Specific surface area (m2 g(-1)) was related to particle size and varied from 1.3 for bed ash to 9.5 for spray dryer material. Many of the chemical and physical properties of these FGD samples were associated with the quality of the coal rather than the combustion and SO2 scrubbing processes used.