Sensorized waste collection container for content estimation and collection optimization

The concurrent effects of a fast national growth rate, of a large and dense residential area and a pressing demand for urban environmental protection create a challenging framework for waste management in Pudong New Area, Shanghai. The complexity of context and procedures is indeed a primary concern of local municipal authorities due to problems related to the collection, transportation and processing of residential solid waste. In order to design and implement a suitable urban solid waste system, the first task is to forecast the quantity and variance of solid waste as it relates to residential population, consumer index, season, etc. The system here discussed addresses exactly these issues, by means of an intelligent, sensorized container. The container has been prepared and tested in the Pudong New Area, Shanghai.     

Urban Metal Management The Example of Lead

The metal metabolism of an urban region, the City ofVienna, was investigated to discuss urban metal management strategies in view of environmental protection and resource conservation. About 90% of the metal stock is located in Vienna's buildings and infrastructure, whilst only 10% is in the landfills. The city stock represents a potential source for diffusive emissions. However, the control of the current environmental policy concentrates mainly on landfill emissions. Diffusive emissions resulting from the losses over the use of metal containing goods in the city are widely dispersed and cannot be easily controlled due to numerous non-point sources. First investigations indicate that for certain applications, the diffusive stock emissions are as significant as other sources. At present, Vienna's known diffusive and point source lead emissions into air and water are about 40 to 50 times higher than comparable past loadings from geogenic Vienna. Furthermore, a life cycle approach from acid car batteries indicates that sustainable lead management should consider flows and stocks in the hinterland of the city too. The city metal stock also represents a potential resource. Leaded water pipes built-in in Vienna's city stock have the potential to produce 1.6 million traditional car batteries. In future such city mining strategies can partly replace ore mining.     

Modeling of urban solid waste management system: the case of Dhaka city

This paper presents a system dynamics computer model to predict solid waste generation, collection capacity and electricity generation from solid waste and to assess the needs for waste management of the urban city of Dhaka, Bangladesh. Simulated results show that solid waste generation, collection capacity and electricity generation potential from solid waste increase with time. Population, uncleared waste, untreated waste, composite index and public concern are projected to increase with time for Dhaka city. Simulated results also show that increasing the budget for collection capacity alone does not improve environmental quality; rather an increased budget is required for both collection and treatment of solid wastes of Dhaka city. Finally, this model can be used as a computer laboratory for urban solid waste management (USWM) policy analysis.     

Mathematical modeling to predict residential solid waste generation

One of the challenges faced by waste management authorities is determining the amount of waste generated by households in order to establish waste management systems, as well as trying to charge rates compatible with the principle applied worldwide, and design a fair payment system for households according to the amount of residential solid waste (RSW) they generate. The goal of this research work was to establish mathematical models that correlate the generation of RSW per capita to the following variables: education, income per household, and number of residents. This work was based on data from a study on generation, quantification and composition of residential waste in a Mexican city in three stages. In order to define prediction models, five variables were identified and included in the model. For each waste sampling stage a different mathematical model was developed, in order to find the model that showed the best linear relation to predict residential solid waste generation. Later on, models to explore the combination of included variables and select those which showed a higher R(2) were established. The tests applied were normality, multicolinearity and heteroskedasticity. Another model, formulated with four variables, was generated and the Durban-Watson test was applied to it. Finally, a general mathematical model is proposed to predict residential waste generation, which accounts for 51% of the total.     

Fluxes and Loading of Heavy Metals, Benzo[a]pyrene and Oil Products in Vilnius City

The concentrations of heavy metals Pb, Cd, Cu, Zn and Hg, benzo[a]pyrene and oil products (C₁₅–C₂₈) in bulk (wet and dry) atmospheric deposition in Vilnius city in 2005–2006 were analysed. The highest flux to the ground surface of the city residential area, reaching 1,680 mg m^?2 year^?1, was determined for oil products, which in atmospheric bulk deposition was estimated to be mainly in the form of solid sediments. Among heavy metals, the highest flux was determined for Zn (113.5 mg m^?2 year^?1), while the lowest flux was determined for Hg (0.06 mg m^?2 year^?1). The flux of investigated pollutants ranges from a few times, or for some pollutants, up to one order of magnitude higher at the urban sampling site in comparison to residential or background sites. Some hundred tons of oil products, approximately 52 tons of zinc and a considerably lower amount of mercury, benzo[a]pyrene and cadmium deposit yearly to the ground and water surface of Vilnius city. Metallic constructions related to transport and buildings, automobile exhausts, spills of fuel and lubricants are suggested to be the factors which result in the accumulation of high amounts of heavy metals, oil products and other pollutants on the ground surface of the city.     

住宅小区雨水资源化与中水回用模式与技术

住宅小区雨水资源化利用与中水回用是建设节水型城市,实现水资源可持续利用的重要组成部分．住宅小区的雨水资源化利用技术将雨水收集、雨水分散处理、雨水集中利用、雨水渗透等技术进行集成优化,具有处理效果好、雨水利用率高、管理方便的优点。住宅小区中水回用属于封闭式污水再生回用系统,采用膜生物反应器（MBR）技术作为小区中水回用技术,具有占地面积少、工艺流程短、处理效率高等优点。     

Characterization of urban solid waste in Chihuahua, Mexico

The characterization of urban solid waste generation is fundamental for adequate decision making in the management strategy of urban solid waste in a city. The objective of this study is to characterize the waste generated in the households of Chihuahua city, and to compare the results obtained in areas of the city with three different socioeconomic levels. In order to identify the different socioeconomic trends in waste generation and characterization, 560 samples of solid waste were collected during 1 week from 80 households in Chihuahua and were hand sorted and classified into 15 weighted fractions. The average waste generation in Chihuahua calculated in this study was 0.676 kg per capita per day in April 2006. The main fractions were: organic (48%), paper (16%) and plastic (12%). Results show an increased waste generation associated with the socioeconomic level. The characterization in amount and composition of urban waste is the first step needed for the successful implementation of an integral waste management system.     

Attitudes and behaviour towards waste management in the Dublin,Ireland region

The hypothesis of this research was that attitudes about the management of biodegradable municipal waste (BMW) are spatially variable, even within a city of modest (1.2 million) population. For a select number of representative electoral districts in the Dublin, Ireland region, residents were surveyed regarding attitudes towards waste management in general, and BMW management in particular. A total of 850 survey responses were collected. Door-to-door interviews produced 688 responses in the residential sector; these were supplemented by 162 responses to a web-based survey.The surveys revealed that the majority of households use local authority, rather than private, waste collection services (both are available). The majority of residents, regardless of the local authority in which they live, were satisfied with their waste management service. “Reducing the quantity of waste generated” was regarded the most important future issue for 28% of residential respondents. Statistical analyses of the survey responses showed that the local authority in which respondents resided significantly influenced most responses (including waste collection service used, waste service satisfaction and backyard composting activity). Many responses (including waste service satisfaction, waste management influences) were also significantly related to the respondents’ personal characteristics (e.g., education level, type of accommodation, age, etc.). These statistical results proved the hypothesis of the research and demonstrated that waste management initiatives designed for one area of the city (or, indeed, for uniform application to the city as a whole) could ignore the needs of other areas. The survey responses suggest that targeted intervention strategies would lead to improved diversion rates of BMW from landfill, a requirement of the Landfill Directive 1999/31/EC.     

Pneumatic vs. door-to-door waste collection systems in existing urban areas: a comparison of economic performance

Pneumatic waste collection systems are becoming increasingly popular in new urban residential areas, and an attractive alternative to conventional vehicle-operated municipal solid waste (MSW) collection also in ready-built urban areas. How well pneumatic systems perform in ready-built areas is, however, an unexplored topic. In this paper, we analyze how a hypothetical stationary pneumatic waste collection system compares economically to a traditional vehicle-operated door-to-door collection system in an existing, densely populated urban area. Both pneumatic and door-to-door collection systems face disadvantages in such areas. While buildings and fixed city infrastructure increase the installation costs of a pneumatic system in existing residential areas, the limited space for waste transportation vehicles and containers cause problems for vehicle-operated waste collection systems. The method used for analyzing the cost effects of the compared waste collection systems in our case study takes into account also monetized environmental effects of both waste collection systems. As a result, we find that the door-to-door collection system is economically almost six times more superior. The dominant cost factor in the analysis is the large investment cost of the pneumatic system. The economic value of land is an important variable, as it is able to reverse the results, if the value of land saved with a pneumatic system is sufficiently high.     

Recovery and recycling practices in municipal solid waste management in Lagos, Nigeria

The population of Lagos, the largest city in Nigeria, increased seven times from 1950 to 1980 with a current population of over 10 million inhabitants. The majority of the city's residents are poor. The residents make a heavy demand on resources and, at the same time, generate large quantities of solid waste. Approximately 4 million tonnes of municipal solid waste (MSW) is generated annually in the city, including approximately 0.5 million of untreated industrial waste. This is approximately 1.1 kg/cap/day. Efforts by the various waste management agencies set up by the state government to keep its streets and neighborhoods clean have achieved only minimal success. This is because more than half of these wastes are left uncollected from the streets and the various locations due to the inadequacy and inefficiency of the waste management system. Whilst the benefits of proper solid waste management (SWM), such as increased revenues for municipal bodies, higher productivity rate, improved sanitation standards and better health conditions, cannot be overemphasized, it is important that there is a reduction in the quantity of recoverable materials in residential and commercial waste streams to minimize the problem of MSW disposal. This paper examines the status of recovery and recycling in current waste management practice in Lagos, Nigeria. Existing recovery and recycling patterns, recovery and recycling technologies, approaches to materials recycling, and the types of materials recovered from MSW are reviewed. Based on these, strategies for improving recovery and recycling practices in the management of MSW in Lagos, Nigeria are suggested.     

Source separation of household waste: a case study in China

A pilot program concerning source separation of household waste was launched in Hangzhou, capital city of Zhejiang province, China. Detailed investigations on the composition and properties of household waste in the experimental communities revealed that high water content and high percentage of food waste are the main limiting factors in the recovery of recyclables, especially paper from household waste, and the main contributors to the high cost and low efficiency of waste disposal. On the basis of the investigation, a novel source separation method, according to which household waste was classified as food waste, dry waste and harmful waste, was proposed and performed in four selected communities. In addition, a corresponding household waste management system that involves all stakeholders, a recovery system and a mechanical dehydration system for food waste were constituted to promote source separation activity. Performances and the questionnaire survey results showed that the active support and investment of a real estate company and a community residential committee play important roles in enhancing public participation and awareness of the importance of waste source separation. In comparison with the conventional mixed collection and transportation system of household waste, the established source separation and management system is cost-effective. It could be extended to the entire city and used by other cities in China as a source of reference.     

Planning Water Resources Management in Small Islands. The Case of Kalymnos,Greece

Kalymnos is one of the largest islands of the Dodecanese, a rather dense island complex situated at the southeast corner of Europe. The development potential of the area is large. A serious restrictive factor, though, is fresh water availability. The latter has declined in the last few years, due to increase in population and in per capita water demand. As a result, the already stressed groundwater resources have been overexploited, and salinization of many coastal aquifers has already taken place. Since water import from other areas is not a sustainable solution, optimization of the management of local water resources is necessary. This paper deals with both sides of the water balance of Kalymnos. First an estimate of the evolution of water demand is discussed. The use of a GIS tool, in order to estimate renewable water resources at the hydrologic basin scale, is presented next. Conjunctive use of surface and ground water resources, including traditional rainwater collection, is proposed. Water resources development in the hydrologic basin of Vathy, which is one of the largest of the island, is discussed in more detail.     

A multiple criteria analysis for household solid waste management in the urban community of Dakar

Household solid waste management is a severe problem in big cities of developing countries. Mismanaged solid waste dumpsites produce bad sanitary, ecological and economic consequences for the whole population, especially for the poorest urban inhabitants. Dealing with this problem, this paper utilizes field data collected in the urban community of Dakar, in view of ranking nine areas of the city with respect to multiple criteria of nuisance. Nine criteria are built and organized in three families that represent three classical viewpoints: the production of wastes, their collection and their treatment. Thanks to the method PROMETHEE and the software ARGOS, we do a pair-wise comparison of the nine areas, which allows their multiple criteria rankings according to each viewpoint and then globally. Finding the worst and best areas in terms of nuisance for a better waste management in the city is our final purpose, fitting as well as possible the needs of the urban community. Based on field knowledge and on the literature, we suggest applying general and area-specific remedies to the household solid waste problems.     

Seasonal evolution of beach waste and litter during the bathing season on the Catalan coast

Beach waste and litter composition and evolution on popular urban (located in the main nucleus of the municipality) and urbanized (located in residential areas outside the main nucleus) beaches of the Costa Brava (Catalan coast) were assessed during the bathing season. Waste and litter production (amount and composition) were affected by urbanization and varied during the summer. Urban beaches had higher densities of waste deposition and lower percentages of organic, domestic and other miscellaneous waste than urbanized beaches. Litter characteristics were also influenced by type of beach, and varied during the season as a consequence of beach use and cleaning practices, but not environmental factors. Urbanized beaches obtained higher scores for aesthetic quality of sand than urban beaches, and small-sized litter tended to accumulate during the season in the beach of Lloret Centre. The most important problems are management of recyclable materials, litter left by users on the sand, and separation of sand from litter. In addition, current efficiency of mechanical cleaning is low, especially in the withdrawal of cigarette butts. These analyses highlight problems that should be addressed in future management of area beaches.     

Leaching properties of stabilised/solidified cement-admixtures-sewage sludges systems

One of the main objectives of this work is to present an effective alternative for the final destination of sludge from urban waste water treatment plants by its use as a component of mortar or concrete. A binding and stabilizing matrix of sludge-cement and sludge-cement-coal fly-ash was investigated and the effects of various percentages of waste and binder, on the behavior of sludge in the system are presented. Assessment of the environmental quality of the final product and the consequent guarantee of its use in the building industry demand that it meets a number of requisites, one of which is that the effluents extracted by water action should be contamination-free, or at least that the concentration of contaminants should be below certain pre-set limits. For this a number of leaching tests must be carried out, such as the Netherlands Leaching Test .     

Assessment of municipal solid waste generation and recyclable materials potential in Kuala Lumpur,Malaysia

This paper presents a forecasting study of municipal solid waste generation (MSWG) rate and potential of its recyclable components in Kuala Lumpur (KL), the capital city of Malaysia. The generation rates and composition of solid wastes of various classes such as street cleansing, landscape and garden, industrial and constructional, institutional, residential and commercial are analyzed. The past and present trends are studied and extrapolated for the coming years using Microsoft office 2003 Excel spreadsheet assuming a linear behavior. The study shows that increased solid waste generation of KL is alarming. For instance, the amount of daily residential SWG is found to be about 1.62 kg/capita; with the national average at 0.8–0.9 kg/capita and is expected to be increasing linearly, reaching to 2.23 kg/capita by 2024. This figure seems reasonable for an urban developing area like KL city. It is also found that, food (organic) waste is the major recyclable component followed by mix paper and mix plastics. Along with estimated population growth and their business activities, it has been observed that the city is still lacking in terms of efficient waste treatment technology, sufficient fund, public awareness, maintaining the established norms of industrial waste treatment etc. Hence it is recommended that the concerned authority (DBKL) shall view this issue seriously.     

Sources and Mass Flows of Xenobiotics in Urban Water Cycles—an Overview on Current Knowledge and Data Gaps

In this study, several emerging compounds of concern in waste water are identified and discussed in relation to data available on their sources and mass flows in urban waters. In most western European situations, the highest contributions to the mass flow of xenobiotics to the urban water cycle stems from household and services applications (e.g. personal care compounds, pharmaceuticals, steroid hormones, flame retardants, fluorinated detergents etc.) as well as building and constructing environments (e.g. flame retardants, plasticizers, UV-blockers and biocides). The contribution from industrial point sources such as incineration industries e.g. coal, tar, steel and gas production (such as PAHs, PCBs, dioxins, etc.) and chemical industries are decreasing in relevance in terms of input and are hence currently of more local relevance only. In relation to identified compounds, this paper considers current data availability and its use in a range of management strategies for the mitigation or controlling of xenobiotics ‘at source’. However it also identifies major knowledge gaps relating to the behaviour and fate of organic pollutants in various sectors of the urban water cycle including stormwater management, bank- and soil infiltration as well as underground and soil passage of polluted waters. It is also discussing the major sources of a range of current day urban pollutants. The paper considers the sources of emerging pollutants in a qualitative way.     

Prediction of household and commercial BMW generation according to socio-economic and other factors for the Dublin region

Both planning and design of integrated municipal solid waste management systems require accurate prediction of waste generation. This research predicted the quantity and distribution of biodegradable municipal waste (BMW) generation within a diverse ‘landscape’ of residential areas, as well as from a variety of commercial establishments (restaurants, hotels, hospitals, etc.) in the Dublin (Ireland) region. Socio-economic variables, housing types, and the sizes and main activities of commercial establishments were hypothesized as the key determinants contributing to the spatial variability of BMW generation. A geographical information system (GIS) ‘model’ of BMW generation was created using ArcMap, a component of ArcGIS 9. Statistical data including socio-economic status and household size were mapped on an electoral district basis. Historical research and data from scientific literature were used to assign BMW generation rates to residential and commercial establishments. These predictions were combined to give overall BMW estimates for the region, which can aid waste planning and policy decisions. This technique will also aid the design of future waste management strategies, leading to policy and practice alterations as a function of demographic changes and development. The household prediction technique gave a more accurate overall estimate of household waste generation than did the social class technique. Both techniques produced estimates that differed from the reported local authority data; however, given that local authority reported figures for the region are below the national average, with some of the waste generated from apartment complexes being reported as commercial waste, predictions arising from this research are believed to be closer to actual waste generation than a comparison to reported data would suggest. By changing the input data, this estimation tool can be adapted for use in other locations. Although focusing on waste in the Dublin region, this method of waste prediction can have significant potential benefits if a universal method can be found to apply it effectively.