Construction of Ag2CO3/BiOBr/CdS ternary composite photocatalyst with improved visible-light photocatalytic activity on tetracycline molecule degradation

Photocatalytic degradation was considered as a best strategy for the removal of antibiotic drug pollutants from wastewater. The photocatalyst of ABC (Ag₂CO₃/BiOBr/CdS) composite synthesized by hydrothermal and precipitation method. The ABC composite used to investigate the degradation activity of tetracycline (TC) under visible light irradiation. The physicochemical characterization methods (e.g. scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution-transmission electron microscopy (HR-TEM), ultraviolet visible spectroscopy (UV), photoluminescence (PL) and time resolved photoluminescence (TRPL) clearly indicate that the composite has been construct successfully that enhances the widened visible light absorption, induces charge transfer and separation efficiency of electron – hole pairs. The photocatalytic activity of all samples was examined through photodegradation of tetracycline in aqueous medium. The photocatalytic degradation rate of ABC catalyst could eliminate 98.79% of TC in 70 min, which is about 1.5 times that of Ag₂CO_3, 1.28 times that of BiOBr and 1.1 times that of BC catalyst, respectively. The role of operation parameters like, TC concentration, catalyst dosage and initial pH on TC degradation activity were studied. Quenching experiment was demonstrated that ·OH and O₂^·− were played a key role during the photocatalysis process that was evidently proved in electron paramagnetic resonance (EPR) experiment. In addition, the catalyst showed good activity perceived in reusability and stability test due to the synergistic effect between its components. The mechanism of degradation of TC in ABC composite was proposed based on the detailed analysis. The current study will give an efficient and recyclable photocatalyst for antibiotic aqueous pollutant removal.     

Removal of elemental mercury by photocatalytic oxidation over La2O3/Bi2O3 composite

La₂O₃/Bi₂O₃ photocatalysts were prepared by impregnation of Bi₂O₃ with an aqueous solution of lanthanum precursor followed by calcination at different temperatures. The composite materials were used for the first time for the photocatalytic removal of Hg⁰ from a simulated flue gas under UV light irradiation. The results showed that the sample containing 6 wt.% La₂O₃ and calcined at 500°C has the highest dispersion of the active sites, which was promoted by the strong interaction with the support (i.e., the formation of Bi-O-La species). Since they are fully accessible on the surface, the material also exhibits excellent optical properties while the heterojunction formed in La₂O₃/Bi₂O₃ promotes the separation and migration of photoelectron-hole pairs and thus Hg⁰ oxidation efficiency is enhanced. The effects of the various factors (e.g., the reaction temperature and composition of the simulated flue gas (i.e., O₂, NO, H₂O, and SO₂)) on the efficiency of the Hg⁰ photocatalytic oxidation were investigated. The results demonstrated that O₂ and SO₂ enhanced the efficiency of the reaction while the reaction temperature, NO, and H₂O had an inhibitory effect.     

Identification and characterization of Fe3O4/peroxodisulfate advanced oxidation products from sulfameter

Sulfonamides (SAs) are one of the most widely used antibiotics and their residuals in the environment could cause some negative environmental issues. Advanced oxidation such as Fenton-like reaction has been widely applied in the treatment of SAs polluted water. Degradation rates of 95%-99.7% were achieved in this work for the tested 8 SAs, including sulfisomidine, sulfameter (SME), phthalylsulfathiazole, sulfamethoxypyridazine, sulfamonomethoxine, sulfisoxazole, sulfachloropyridazine, and sulfadimethoxine, in the Fe₃O₄/peroxodisulfate (PDS) oxidation system after the optimization of PDS concentration and pH. Meanwhile, it was found that a lot of unknown oxidation products were formed, which brought up the uncertainty of health risks to the environment, and the identification of these unknown products was critical. Therefore, SME was selected as the model compound, from which the oxidation products were never elucidated, to identify these intermediates/products. With liquid chromatography-high resolution tandem mass spectrometry (LC-HRMS/MS), 10 new products were identified, in which 2-amino-5-methoxypyrimidine (AMP) was confirmed by its standard. The investigation of the oxidation process of SME indicated that most of the products were not stable and the degradation pathways were very complicated as multiple reactions, such as oxidation of the amino group, SO₂ extrusion, and potential cross-reaction occurred simultaneously. Though most of the products were not verified due to the lack of standards, our results could be helpful in the evaluation of the treatment performance of SAs containing wastewater.     

Preparation and photocatalytic performance study of dual Z-scheme Bi2Zr2O7/g-C3N4/Ag3PO4 for removal of antibiotics by visible-light

At present, the high re-combination rate of photogenerated carriers and the low redox capability of the photocatalyst are two factors that severely limit the improvement of photocatalytic performance. Herein, a dual Z-scheme photocatalyst bismuthzirconate/graphitic carbon nitride/silver phosphate (Bi₂Zr₂O₇/g-C₃N₄/Ag₃PO₄ (BCA)) was synthesized using a co-precipitation method, and a dual Z-scheme heterojunction photocatalytic system was established to decrease the high re-combination rate of photogenerated carriers and consequently improve the photocatalytic performance. The re-combination of electron-hole pairs (e⁻ and h⁺) in the valence band (VB) of g-C₃N₄ increases the redox potential of e⁻ and h⁺, leading to significant improvements in the redox capability of the photocatalyst and the efficiency of e⁻-h⁺ separation. As a photosensitizer, Ag₃PO₄ can enhance the visible light absorption capacity of the photocatalyst. The prepared photocatalyst showed strong stability, which was attributed to the efficient suppression of photo-corrosion of Ag₃PO₄ by transferring the e⁻ to the VB of g-C₃N₄. Tetracycline was degraded efficiently by BCA-10% (the BCA with 10 wt.% of AgPO₄) under visible light, and the degradation efficiency was up to 86.2%. This study experimentally suggested that the BCA photocatalyst has broad application prospects in removing antibiotic pollution.     

UV/H2O2 oxidation of tri(2-chloroethyl) phosphate: Intermediate products, degradation pathway and toxicity evaluation

Tri(2-chloroethyl) phosphate(TCEP) with the initial concentration of 5 mg/L was degraded by UV/H₂O₂ oxidation process. The removal rate of TCEP in the UV/H₂O₂ system was 89.1% with the production of Cl-and PO₄^3- of 0.23 and 0.64 mg/L. The removal rate of total organic carbon of the reaction was 48.8% and the pH reached 3.3 after the reaction. The oxidative degradation process of TCEP in the UV/H₂O₂ system ...     

Effect of reduction pretreatments on PdAg/Al2O3 for HCHO and CO oxidation

PdAg/Al₂O₃ were pretreated by CO and H₂ reduction pretreatments, respectively. The reduced catalysts were tested for HCHO and CO oxidation and characterized by Brunner Emmet Teller (BET), X-ray diffraction (XRD), transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS) and oxygen temperature programmed desorption (O₂-TPD). These results indicate that the pretreatments have effect on PdAg reconstruction, PdAg particle size and active oxygen species, which are responsible for the catalytic performance. Compared with H₂ reduction method, CO reduction is more suitable for PdAg/Al₂O₃ pretreatment. PdAg/Al₂O₃-CO exhibited better catalytic performance.     

Green and efficient degradation of cefoperazone sodium by Bi4O5Br2 leading to the production of non-toxic products: Performance and degradation pathway

Photocatalytic process represents a promising approach to overcome the pollution challenge associated with the antibiotics-containing wastewater. This study provides a green, efficient and novel approach to remove cephalosporins, particularly cefoperazone sodium (CFP). Bi₄O₅Br₂ was chosen for the first time to systematically study its degradation for CFP, including the analysis of material structure, degradation performance, the structure and toxicity of the transformation products, etc. The degradation rate results indicated that Bi₄O₅Br₂ had an excellent catalytic activity leading to 78% CFP removal compared with the pure BiOBr (38%) within 120 min of visible light irradiation. In addition, the Bi₄O₅Br₂ presents high stability and good organic carbon removal efficiency. The effects of the solution pH (3.12 - 8.75) on catalytic activity revealed that CFP was mainly photocatalyzed under acidic conditions and hydrolyzed under alkaline conditions. Combined with active species and degradation product identification, the photocatalytic degradation pathways of CFP by Bi₄O₅Br₂ was proposed, including hydrolysis, oxidation, reduction and decarboxylation. Most importantly, the identified products were all hydrolysis rather than oxidation byproducts transformed from the intermediate of β-lactam bond cleavage in CFP molecule, quite different from the mostly previous studies. Furthermore, the final products were demonstrated to be less toxic through the toxicity analysis. Overall, this study illustrates the detailed mechanism of CFP degradation by Bi₄O₅Br₂ and confirms Bi₄O₅Br₂ to be a promising material for the photodegradation of CFP.     

Construction of ternary CuO/CuFe2O4/g-C3N4 composite and its enhanced photocatalytic degradation of tetracycline hydrochloride with persulfate under simulated sunlight

In this study, a graphitic carbon nitride（g-C₃N₄） based ternary catalyst Cu O/Cu Fe₂O₄/gC₃N₄（CCCN） is successfully prepared thorough calcination method. After confirming the structure and composition of CCCN, the as-synthesized composites are utilized to activate persulfate（PS） for the degradation of organic contaminant. While using tetracycline hydrochloride（TC） as pollutant surrogate, the effects of initial p H, PS and catalyst ...     

Efficient photocatalysis of tetracycline hydrochloride (TC-HCl) from pharmaceutical wastewater using AgCl/ZnO/g-C3N4 composite under visible light: Process and mechanisms

AgCl/ZnO/g-C₃N₄, a visible light activated ternary composite catalyst, was prepared by combining calcination, hydrothermal reaction and in-situ deposition processes to treat/photocatalyse tetracycline hydrochloride (TC-HCl) from pharmaceutical wastewater under visible light. The morphological, structural, electrical, and optical features of the novel photocatalyst were characterized using scanning electron microscopy (SEM), UV-visible light absorption spectrum (UV–Vis DRS), X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and transient photocurrent techniques. All analyses confirmed that the formation of heterojunctions between AgCl/ZnO and g-C₃N₄ significantly increase electron-hole transfer and separation compared to pure ZnO and g-C₃N₄. Thus, AgCl/ZnO/g-C₃N₄ could exhibit superior photocatalytic activity during TC-HCl assays (over 90% removal) under visible light irradiation. The composite could maintain its photocatalytic stability even after four consecutive reaction cycles. Hydrogen peroxide (H₂O₂) and superoxide radical (^·O₂) contributed more than holes (h⁺) and hydroxyl radicals (^·OH) to the degradation process as showed by trapping experiments. Liquid chromatograph-mass spectrometer (LC-MS) was used for the representation of the TC-HCl potential degradation pathway. The applicability and the treatment potential of AgCl/ZnO/g-C₃N₄ against actual pharmaceutical wastewater showed that the composite can achieve removal efficiencies of 81.7%, 71.4% and 69.0% for TC-HCl, chemical oxygen demand (COD) and total organic carbon (TOC) respectively. AgCl/ZnO/g-C₃N₄ can be a prospective key photocatalyst in the field of degradation of persistent, hardly-degradable pollutants, from industrial wastewater and not only.     

In situ preparation of g-C3N4/Bi4O5I2 complex and its elevated photoactivity in Methyl Orange degradation under visible light

A graphite carbon nitride(g-C₃N₄) modified Bi₄O₅I₂ composite was successfully prepared insitu via the thermal treatment of a g-C₃N₄/Bi OI precursor at 400°C for 3 hr.The as-prepared g-C₃N₄/Bi₄O₅I₂ showed high photocatalytic performance in Methyl Orange(MO) degradation under visible light.The best sample presented a degradation rate of 0.164 min^-1,which is...     

Construction of dual Z-scheme Bi2WO6/g-C3N4/black phosphorus quantum dots composites for effective bisphenol A degradation

In this work, a novel dual Z-scheme Bi₂WO₆/g-C₃N₄/black phosphorus quantum dots (Bi₂WO₆/g-C₃N₄/BPQDs) composites were fabricated and utilized towards photocatalytic degradation of bisphenol A (BPA) under visible-light irradiation. Optimizing the content of g-C₃N₄ and BPQDs in Bi₂WO₆/g-C₃N₄/BPQDs composites to a suitable mass ratio can enhance the visible-light harvesting capacity and increase the charge separation efficiency and the transfer rate of excited-state electrons and holes, resulting in much higher photocatalytic activity for BPA degradation (95.6%, at 20 mg/L in 120 min) than that of Bi₂WO₆ (63.7%), g-C₃N₄ (25.0%), BPQDs (8.5%), and Bi₂WO₆/g-C₃N₄ (79.6%), respectively. Radical trapping experiments indicated that photogenerated holes (h⁺) and superoxide radicals (•O₂⁻) played crucial roles in photocatalytic BPA degradation. Further, the possible degradation pathway and photocatalytic mechanism was proposed by analyzing the BPA intermediates. This work also demonstrated that the Bi₂WO₆/g-C₃N₄/BPQDs as effective photocatalysts was stable and have promising potential to remove environmental contaminants from real water samples.     

Role of NO and SO2 in mercury oxidation over a La2O3/Fe2O3 catalyst with high thermal stability

In this study, the thermal stability of a ferric oxide catalyst for mercury oxidation was found to be considerably promoted by doping with La₂O₃. The catalysts doped with La₂O₃ maintained a higher surface area when subjected to high-temperature calcination, with lower average pore size and a narrower pore size distribution. X-ray diffraction (XRD) results revealed that La₂O₃ doping hinders the growth of catalyst particles and crystallization of the material at high temperatures. Both NO and SO₂ inhibited Hg⁰ oxidation over the La₂O₃/Fe₂O₃ catalyst. Fourier transform infrared (FTIR) spectra revealed that SO₂ reacts with O₂ over the catalysts to form several species that are inert for mercury oxidation, such as SO₄^2?, HSO₄^?, or other related species; these inert species cover the catalyst surface and consequently decrease Hg⁰ oxidation capacity. In addition, NO or SO₂ competed with Hg⁰ for active sites on the La₂O₃/Fe₂O₃ catalyst and hindered the adsorption of mercury, thereby inhibiting subsequent Hg⁰ oxidation. Hg⁰ oxidation on the La₂O₃/Fe₂O₃ catalyst mainly followed the Eley–Rideal mechanism. Moreover, the inhibition effects of NO and SO₂ were at least partially reversible, and the catalytic activity was temporarily restored after eliminating NO or SO₂.     

Synergistic effects of Cu species and acidity of Cu-ZSM-5 on catalytic performance for selective catalytic oxidation of n-butylamine

In this work, a series of Cu-ZSM-5 catalysts with different SiO₂/Al₂O₃ ratios(25, 50, 100 and₂00) were synthesized and investigated in n-butylamine catalytic degradation. The n-butylamine can be completely catalytic degradation at 350 °C over all Cu-ZSM-5 catalysts. Moreover, Cu-ZSM-5(25) exhibited the highest selectivity to N₂, exceeding 90% at 350 °C. These samples were investigated in detail by several characterizations to illuminate the ...     

Ni(NH3)62+ more efficient than Ni(H2O)62+ and Ni(OH)2 for catalyzing water and phenol oxidation on illuminated Bi2MoO6 with visible light

Nickel (hydr)oxide (NiOH) is known to be good co-catalyst for the photoelectrochemical oxidation of water, and for the photocatalytic oxidation of organics on different semiconductors. Herein we report a greatly improved activity of Bi₂MoO₆ (BMO) by nickel hexammine perchlorate (NiNH). Under visible light, phenol oxidation on BMO was slow. After NiNH, NiOH, and Ni²⁺ loading, a maximum rate of phenol oxidation increased by factors of approximately 16, 8.8, and 4.7, respectively. With a BMO electrode, all catalysts inhibited O₂ reduction, enhanced water (photo-)oxidation, and facilitated the charge transfer at solid-liquid interface, respectively, the degree of which was always NiNH > NiOH > Ni²⁺. Solid emission spectra indicated that all catalysts improved the charge separation of BMO, the degree of which also varied as NiNH > NiOH > Ni²⁺. Furthermore, after a phenol-free aqueous suspension of NiNH/BMO was irradiated, there was a considerable Ni(III) species, but a negligible NH₂ radical. Accordingly, a plausible mechanism is proposed, involving the hole oxidation of Ni(II) into Ni(IV), which is reactive to phenol oxidation, and hence promotes O₂ reduction. Because NH₃ is a stronger ligand than H₂O, the Ni(II) oxidation is easier for Ni(NH₃)⁶⁺ than for Ni(H₂O)⁶⁺. This work shows a simple route how to improve BMO photocatalysis through a co-catalyst.