Environmental impact assessment of salmonid feeds using Life Cycle Assessment (LCA)

Understanding the environmental burdens associated with aquafeeds is a critical component for assessing and improving the environmental performance of aquaculture. The aim of the study was to assess the environmental impacts associated with feeds for rainbow trout production in France, using Life Cycle Assessment (LCA). The stages assessed are: the extraction of the raw materials, the production and transformation of the primary ingredients used, the manufacturing of the feeds, the use of the feeds at the farm, transport at all stages, and the production and use of energy resources. The assessment revealed that the use of fishery resources (such as biotic resource use) and nutrient emissions at the farm (such as eutrophication potential) contribute most to the potential environmental impacts of salmonid aquafeeds. Improvements in feed composition and management practices seem to be the best ways for improving the environmental profile of aquafeeds.     

Assessment of water quality in the Alqueva Reservoir (Portugal) using bioassays

Background, aim, and scope  

Alqueva Reservoir is the biggest artificial freshwater reservoir in Europe and is an important water supply for human and agricultural consumption in the Alentejo region (Portugal). Pollution can impair environmental and human health status, and to assure water quality and ecological balance, it is crucial to frequently monitor water supplies. In this study, we used an ecotoxicological test battery to identify the potential toxicity of water from this reservoir.     

响应面法优化化学沉淀螯合生物絮凝处理含镍废水

采用化学沉淀螯合自制生物絮凝的处理工艺处理含镍的模拟废水.首先,考察了不同的提取方法对脱水污泥提取的生物絮凝剂的絮凝效果的影响,进而确定生物絮凝剂的提取方法.然后,考察了不同的化学沉淀剂与生物絮凝剂组合处理含镍废水的能力,并采用Plackett-Burman设计法结合响应曲面法筛选优化了化学沉淀螯合生物絮凝处理含镍废水...     

Assessment of Jatropha curcas L. biodiesel seed cake toxicity using the zebrafish (Danio rerio) embryo toxicity (ZFET) test

Consequent to the growing demand for alternative sources of energy, the seeds from Jatropha curcas remain to be the favorite for biodiesel production. However, a significant volume of the residual organic mass (seed cake) is produced during the extraction process, which raises concerns on safe waste disposal. In the present study, we assessed the toxicity of J. curcas seed cake using the zebrafish (Danio rerio) embryotoxicity test. Within 1-h post-fertilization (hpf), the fertilized eggs were exposed to five mass concentrations of J. curcas seed cake and were followed through 24, 48, and 72 hpf. Toxicity was evaluated based on lethal endpoints induced on zebrafish embryos namely egg coagulation, non-formation of somites, and non-detachment of tail. The lowest concentration tested, 1 g/L, was not able to elicit toxicity on embryos whereas 100 % mortality (based also on lethal endpoints) was recorded at the highest concentration at 2.15 g/L. The computed LC50 for the J. curcas seed cake was 1.61 g/L. No further increase in mortality was observed in the succeeding time points (48 and 72 hpf) indicating that J. curcas seed cake exerted acute toxicity on zebrafish embryos. Sublethal endpoints (yolk sac and pericardial edema) were noted at 72 hpf in zebrafish embryos exposed to higher concentrations. The observed lethal endpoints induced on zebrafish embryos were discussed in relation to the active principles, notably, phorbol esters that have remained in the seed cake even after extraction.     

Assessment of heavy metal and organic contaminants levels along the Libyan coast using transplanted mussels (Mytilus galloprovincialis)

Within the framework of the MYTIOR project in 2009, heavy metals and organic compounds contaminations were assessed in transplanted mussels in 16 different stations along the coasts of Libya. These stations were located at miles offshore industrial/urban sources but in open sea providing original results related to the background contamination rather than linked to a specific coastal source of pollutants. Results indicated mercury (Hg, 0.045–0.066 mg/kg dry weight (dw)), lead (Pb, 0.44–0, 71 mg/kg dw) and copper (Cu, 3.56–4.21 mg/kg dw) were in the same range or at lower value than control for all stations. Chromium (Cr) in Meleta (3.08 mg/kg dw) and Bomba (3.80 mg/kg dw) and Cadmium values in all stations (1.21–2.41 mg/kg dw) were above control. Meleta, stations from the gulf of Syrt and the three eastern stations were the most affected stations by nickel (max at 5.83 mg/kg dw in Syrt) when zinc was in the same range (141–197 mg/kg dw) and above the control (92 mg/kg dw) at all stations. Polycyclic aromatic hydrocarbon (PAH) levels were found in the range of 16.8–42.8 mg/kg (dry weight) indicating low levels along the Libyan coast with acenaphthene and benzo (a, b, k) pyrenes detected mainly in western Libya. The study of PAH ratios indicated a mixed petrogenic/pyrolytic origin. The only polychlorinated biphenyls (PCBs) found in Libya were PCB 101 in one location and PCB 153 in Tripoli, Garrapoli, Syrt, Ras Lanuf and Benghazi (1.2–1.9 μg/kg dw). Insecticides were lower than control in all stations except DDT, only detected in Misratah (3.5 μg/kg dw). Overall, the results indicated a low background contamination and a low pollution extent according to the environmental pressure occurring offshore the Libyan coast.     

Assessment of organotin pollution along the Polish coast (Baltic Sea) by using mussels and fish as sentinel organisms

Levels of tributyltin (TBT) and its degradation products, mono- (MBT) and dibutyltin (DBT), as well as triphenyltin (TPT), were monitored in 10 stations along the Polish coast (Baltic Sea). Mussel-Mytilus edulis-and fish-Platichthys flesus-were used as sentinel organisms. The bioaccumulation patterns of butyltin and phenyltin compounds varied substantially. Butyltins were detected in mussel tissue from all the sampled stations. Among them, organisms from the Gulf of Gdansk showed the highest residues (68 ng/g w.w. as Sn) in conjunction with elevated TBT/DBT ratios, which suggest recent inputs of TBT in the area. Additionally, flatfish were sampled in the Gulf of Gdansk, and different tissues (liver, digestive tube and gills) were analyzed separately. TPT, although undetected in mussels, was always present in fish. The highest organotin concentration was observed in the liver (369 ng/g w.w. as Sn) of fish caught near Gdansk port. Relatively high concentrations were observed in digestive tube, which points out the ingestion of organotin contaminated food as an important uptake route of those compounds in P. flesus.     

Assessment of groundwater vulnerability in coastal zone using SI method and GIS: case study of Bouficha aquifer (northeast Tunisia)

Environmental Science and Pollution Research - Nowadays, groundwater is under stress due to contamination, over-exploitation, seawater intrusion, climate change, etc. The groundwater contamination...     

Analysis of the effects diclofenac has on Japanese medaka (Oryzias latipes) using real-time PCR

The expression levels of cytochrome P450 1A, p53 and vitellogenin were investigated in three different tissues of male medaka fish after exposure to diclofenac that is one of the main concerns among pharmaceuticals frequently found in sewage treatment plant (STP) effluents. The results showed that cytochrome P450 1A, p53 and vitellogenin were highly expressed in tissue-specific gene expression patterns after exposure to 8 mg/l and 1 μg/l of diclofenac. These elevated expression levels of three biomarkers suggested that diclofenac has potential to cause cellular toxicity, p53-related genotoxicity and estrogenic effects. It is also noteworthy that diclofenac has the potential to cause these effects even at an environmentally relevant concentration of diclofenac, 1 μg/l.     

Analysis of adsorption processes of dissolved organic matter (DOM) on ferrihydrite using surrogate organic compounds

Environmental Science and Pollution Research - Ferrihydrite (Fh) has been recently used in water treatment for removing dissolved organic matter (DOM), but its governing interactions with...     

Analysis of acidic pesticides using in situ derivatization with alkylchloroformate and solid-phase microextraction (SPME) for GC-MS.

A solid-phase microextraction (SPME) method was developed for the analysis of acidic pesticide residues in water. The method utilizes in situ derivatization with butylchloroformate (BuCF), followed by on-line SPME extraction using a PDMS fibre, and analysis by GC-MS. Derivatives of the phenoxy acids mechlorprop (MCPP), dichlorprop (DCPP), MCPA and 2,4-D and their phenol degradation products 4-chloro-2-methylphenol and 2,4-dichlorophenol (DCP) were identified. Detection limits at 0.16-2.3 microg/l were achieved. Optimization of derivatization, ion strength, extraction time, SPME-fibre, desorption time and temperature are described. Standard curves in the range 0.5-10.0 microg/l were fitted to a second-degree polynomial. Standard deviation (n = 5) was below 10% for the phenol derivatives, but 20-50% for the phenoxy acids. For method verification groundwater samples from a field experiment were screened for content of MCPP and compared to the results from the HPLC analysis. A good agreement was obtained with respect to identification of positive samples, even though concentrations measured by the SPME were lower than with HPLC. Even if the precision and accuracy do not meet the demands for a strictly quantitative analysis, the SPME method is suitable for screening, because it is cheap, it can be automated, and uses smaller amounts of potential harmful solvents. Also, the method is less labour-intensive, as it requires a minimum of sample preparation when compared to traditional analyses. The acidic pesticides bentazon, dicamba, bromoxynil, ioxynil, dinoseb and DNOC were included in the study but could not be analysed by the current method.     

Phytotoxicity of diuron alone and in combination with copper or folpet on duckweed (Lemna minor)

The photosystem II-herbicide diuron is widely used for weed control in Champagne's vineyards. Its important use and its relative persistence make it of particular interest for ecotoxicological studies. Toxicity of diuron was assessed on Lemna minor L., a representative aquatic macrophyte regularly used for toxicological studies. Toxicity assessments were based on inhibition of growth and total chlorophyll content of L. minor cultures after 7 days. Growth was inhibited and IC(50) and IC(90) were, respectively, 25 and 60 microg l(-1), but chlorophyll content of L. minor increased in response to the herbicide. When diuron was combined with copper, growth inhibition of L. minor depended on the concentrations of both chemicals. For some concentrations, combination of these chemicals resulted in a slight (but non-significant) antagonism. Additivity was observed for all other mixtures. When diuron was combined with folpet, growth and chlorophyll content of L. minor only depended on the concentration of the herbicide. Diuron was also found to prevent the copper-induced decrease of chlorophyll content when it was combined with this metal. A multifactorial model was found more appropriate to characterize interactions between pesticides than Abott's model.     

Cadmium and lead in tissues of Mallards (Anas platyrhynchos) and Wood Ducks (Aix sponsa) using the Illinois River (USA)

Cadmium and lead concentrations were determined in the tissues of Mallards and Wood Ducks collected from two waterfowl management areas along the Illinois River, USA, during the autumn and late winter of 1997-1998. Lead concentrations in livers of Mallards were lower than previously reported, and, along with those in a small sample of Wood Duck livers, were within background levels (<2.0 microg/g wet weight). Mean concentrations of cadmium in the kidneys of Wood Ducks utilizing the Illinois River were four times greater than in after-hatch-year Mallards, and 14 times greater than in hatch-year Mallards. Concentrations of cadmium in the kidneys of Wood Ducks were comparable with those of specimens dosed with cadmium or inhabiting contaminated areas in previous studies. Wood Ducks utilizing wetlands associated with the Illinois River, and presumably other portions of the lower Great Lakes region, may be chronically exposed to cadmium.     

Adsorption and removal of As(V) and As(III) using Zr-loaded lysine diacetic acid chelating resin

An adsorption process for the removal of As(V) and As(III) was evaluated under various conditions using zirconium(IV) loaded chelating resin (Zr-LDA) with lysine-Nalpha,Nalpha diacetic acid functional groups. Arsenate ions strongly adsorbed in the pH range from 2 to 5, while arsenite was adsorbed between pH 7 and 10.5. The sorption mechanism is an additional complexation between arsenate or arsenite and Zr complex of LDA. Adsorption isotherm data could be well interpreted by Langmuir equation for As(V) at pH 4 and As(III) at pH 9 with a binding constant 227.93 and 270.47 dm3 mol(-1) and capacity constant 0.656 and 1.1843 mmol g(-1), respectively. Regeneration of the resin was carried out for As(V) using 1 M NaOH. Six adsorption/desorption cycles were performed without significant decrease in the uptake performance. Column adsorption studies showed that the adsorption of As(V) is more favorable compared to As(III), due to the faster kinetics of As(V) compared to As(III). Influence of the coexisting ions on the adsorption of As(V) and As(III) was studied. The applicability of the method for practical water samples was studied.     

Analysis of organic and inorganic species on the surface of atmospheric aerosol using time-of-flight secondary ion mass spectrometry (TOF-SIMS)

This work explores the utility of time-of-flight static secondary-ion mass spectrometry (TOF-SIMS) for the analysis of the surface organic layer on individual atmospheric aerosol particles. The surface sensitivity and minimal fragmentation available with TOF-SIMS suggest that it can be a powerful tool for the examination of the organic and inorganic species on the surface of individual particles. Cascade impactors were used to collect aerosol from summer 2000 Montana forest fires, winter snowmobile samples in Yellowstone National Park, Hawaiian lava and sea salt, from an Asian Dust event reaching Salt Lake City, Utah in April 2001 and from Salt Lake Valley summer urban aerosol. TOF-SIMS analysis and multivariate statistical techniques combined gave chemical and morphological information about the particles. Surfaces of the aerosol from forest fires, snowmobile exhaust, and sea salt were all dominated by aliphatic hydrocarbons and their amphiphilic derivatives. Each source showed a different organic chemical signature. The extent and composition of the organics layer which typically covers the surface of atmospheric particles are expected to effect all of the surface related aerosol properties such as health effects, the ability of the particle to activate and form cloud droplets, and the aggregation of particles as well as reactions between the particle and gas phase species.     

Selective separation of copper(II) and nickel(II) from aqueous media using the complexation-ultrafiltration process

The polyethylenimine (PEI) as complexing agent was used to study the complexation-ultrafiltration (CP-UF) process in the selective removal of Cu(II) from Ni(II) contained in aqueous media. Preliminary tests showed that optimal chemical conditions for Cu(II) and Ni(II) complexation by the PEI polymer were pH>6.0 and 8.0, respectively, and polymer/metal weight ratio of 3.0 and 6.0, respectively. The effect of some important operating parameters on process selectivity was studied by performing UF tests at different parameters: pH, polymer/metal weight ratio, transmembrane pressure (TMP), and membrane cut-off in a batch experimental set-up. It was observed that process selectivity was achieved by choosing the pH value for obtaining a preferential copper complexation (pH 6.0), and the polymer/metal ratio needed to bound only the copper ion (3.0). The selective separation by UF tests was performed by using both a laboratory aqueous solution and a real aqueous effluent (water from Emoli torrent, Rende (CS)). The Iris 30 membrane at TMP of 200 kPa (2 bar) for both aqueous media gave the best results. A complete nickel recovery was reached, and copper recovery was the highest for this membrane (94% and 92%). Besides at this pressure, a lower water amount was needed to obtain total nickel recovery by diafiltration. A little higher membrane fouling was obtained by using the river effluent due to the presence of dissolved organic and inorganic matter.     

Appropriate combination of physico-chemical methods (coagulation/flocculation and ozonation) for the efficient treatment of landfill leachates

An integrated technique consisted of ozonation and coagulation/flocculation processes was studied, aiming to provide an efficient method for the treatment of stabilized/biologically pre-treated leachates, in order to reduce the organic pollutants' content to concentration values lower than the corresponding limits, imposed by the legislation. Leachates were collected from a municipal landfill site; samples containing around 1000 mg l(-1) COD and BOD(5)/COD ratio about 0.17 were treated by using two different processes or combinations between them, i.e. ozonation, coagulation-flocculation, ozonation followed by coagulation/flocculation and coagulation/flocculation followed by ozonation. The application of single ozonation resulted to the efficient removal of color and organic loading, due to the respective oxidation, induced by ozonation; however, COD values lower than 200 mg l(-1) could be only achieved after prolonged reaction times and for high ozone production rates. The coagulation of leachate samples was studied by the addition of ferric chloride or poly-aluminum chloride agents at various dosages. Maximum COD removal rates (up to 72%) were achieved by the addition of 7 mM Fe, or of 11 mM Al respectively. However, final COD values higher than 200 mg l(-1) were obtained indicating the requirement of an additional treatment step. Pre-ozonation followed by coagulation/flocculation was not found to be an efficient treatment approach for this aim, but coagulation/flocculation followed by ozonation, was proved to be an efficient process for the reduction of COD to lower than 180 mg l(-1).     

聚硅硫酸钛（PTSiS）的合成及形貌分析

以硅酸钠和硫酸钛为原料,用共聚法制备了不同硅钛比(硅钛摩尔比分别为3∶1、1∶1和1∶3)的新型绿色无机高分子絮凝剂——聚硅硫酸钛(PTSiS)。用紫外连续扫描光谱仪(UV/Vis)、红外光谱仪(IR)、X-射线衍射(XRD)、扫描电镜(SEM)和倒置生物显微镜对样品中钛硅的微观品貌进行了多方面物性分析。结果表明:当硅钛比为3∶1时,硅酸钠和硫酸钛反应完全。此时,聚硅酸的骨架硅(Si—O—Si)与钛元素发生同晶取代或与钛离子水解形成的表面羟基发生络合,形成的聚硅硫酸钛(PTSiS)是一种高分子的硅钛聚合物,而不是单纯的原料混配。另外,聚硅硫酸钛(PTSiS)具有枝杈长链的网络结构,其骨架主要由框架钛结构(Ti—O—Si)组成。     

Toxicity of uranium and copper individually, and in combination, to a tropical freshwater macrophyte (Lemna aequinoctialis)

Copper (Cu) and uranium (U) are of potential ecotoxicological concern to tropical freshwater biota in northern Australia, as a result of mining activities. Few data are available on the toxicity of U, and no data are available on the toxic interaction of Cu and U, to freshwater biota. This study determined the toxicity of Cu and U individually, and in combination, to a tropical freshwater macrophyte, Lemna aequinoctialis (duckweed), in a synthetic soft water (27 degrees C; pH, 6.5; hardness, 40 mg CaCO3 l-1, alkalinity, 16 mg CaCO3 l-1), typical of many fresh surface waters in coastal northern Australia. The growth rate of L. aequinoctialis decreased with increasing Cu or U concentrations, with the concentration of Cu inhibiting growth by 50% (EC50) being 16+/-1.0 microg l-1, with a minimum detectable effect concentration (MDEC) of 3.2 microg l-1. The concentration of U inhibiting growth by 50% (EC50) was 758+/-35 microg l-1 with a MDEC of 112 microg l-1. The EC50 value for the exposure of L. aequinoctialis to equitoxic mixtures of Cu and U was significantly (P0.05) higher than one toxic unit (1.35; 95% confidence interval, 1.18-1.52), indicating that the combined effects of Cu and U are less than additive (antagonistic). Therefore, inhibition of the growth rate of L. aequinoctialis was reduced when Cu and U were present in equitoxic mixtures, relative to individual metal exposures. Since non-additive (e.g. antagonistic) interactions of metal mixtures cannot be predicted using current mixture models, these results have important potential implications for the protection of freshwater ecosystems through the derivation of national water quality guidelines.