Part V—sorption of pharmaceuticals and personal care products

Background, aim, and scope  Pharmaceuticals and personal care products (PPCPs) including antibiotics, endocrine-disrupting chemicals, and veterinary pharmaceuticals are emerging pollutants, and their environmental risk was not emphasized until a decade ago. These compounds have been reported to cause adverse impacts on wildlife and human. However, compared to the studies on hydrophobic organic contaminants (HOCs) whose sorption characteristics is reviewed in Part IV of this review series, information on PPCPs is very limited. Thus, a summary of recent research progress on PPCP sorption in soils or sediments is necessary to clarify research requirements and directions. Main features  We reviewed the research progress on PPCP sorption in soils or sediments highlighting PPCP sorption different from that of HOCs. Special function of humic substances (HSs) on PPCP behavior is summarized according to several features of PPCP–soil or sediment interaction. In addition, we discussed the behavior of xenobiotic chemicals in a three-phase system (dissolved organic matter (DOM)–mineral–water). The complexity of three-phase systems was also discussed. Results  Nonideal sorption of PPCPs in soils or sediments is generally reported, and PPCP sorption behavior is relatively a more complicated process compared to HOC sorption, such as the contribution of inorganic fractions, fast degradation and metabolite sorption, and species-specific sorption mechanism. Thus, mechanistic studies are urgently needed for a better understanding of their environmental risk and for pollution control. Discussion  Recent research progress on nonideal sorption has not been incorporated into fate modeling of xenobiotic chemicals. A major reason is the complexity of the three-phase system. First of all, lack of knowledge in describing DOM fractionation after adsorption by mineral particles is one of the major restrictions for an accurate prediction of xenobiotic chemical behavior in the presence of DOM. Secondly, no explicit mathematical relationship between HS chemical–physical properties, and their sorption characteristics has been proposed. Last but not least, nonlinear interactions could exponentially increase the complexity and uncertainties of environmental fate models for xenobiotics. Discussion on proper simplification of fate modeling in the framework of nonlinear interactions is still unavailable. Conclusions  Although the methodologies and concepts for studying HOC environmental fate could be adopted for PPCP study, their differences should be highly understood. Prediction of PPCP environmental behavior needs to combine contributions from various fractions of soils or sediments and the sorption of their metabolites and different species. Recommendations and perspectives  More detailed studies on PPCP sorption in separated soil or sediment fractions are needed in order to propose a model predicting PPCP sorption in soils or sediments based on soil or sediment properties. The information on sorption of PPCP metabolites and species and the competition between them is still not enough to be incorporated into any predictive models.     

Managing Swedish forestry’s impact on mercury in fish: Defining the impact and mitigation measures

Inputs of anthropogenic mercury (Hg) to the environment have led to accumulation of Hg in terrestrial and aquatic ecosystems, contributing to fish Hg concentrations well above the European Union standards in large parts of Fennoscandia. Forestry operations have been reported to increase the concentrations and loads of Hg to surface waters by mobilizing Hg from the soil. This summary of available forestry effect studies reveals considerable variation in treatment effects on total Hg (THg) and methylmercury (MeHg) at different sites, varying from no effect up to manifold concentration increases, especially for the bioavailable MeHg fraction. Since Hg biomagnification depends on trophic structures, forestry impacts on nutrient flows will also influence the Hg in fish. From this, we conclude that recommendations for best management practices in Swedish forestry operations are appropriate from the perspective of mercury contamination. However, the complexity of defining effective policies needs to be recognized.     

Climate change impact assessment on Northeast China’s grain production

The international community is paying more attention to climate change because a consensus has been reached that climate change has an adverse effect not only on the environment but also on agriculture. Therefore, in this study, present and future climate datasets (obtained from general circulation models) including atmospheric carbon concentration were used to assess the impact of climate change on grain production for an important base of China (Northeast). An empirical model has been developed using climate and other additional variables (effective irrigation area, fertilizer, and labor force) to assess the effect of climate change on grain production. The results revealed that maximum temperature is a key climate determinant in grain production of the study area. Atmospheric carbon concentration showed a significant impact on grain outputs in most of the cases. During the analysis, it was observed that precipitation displayed a declining trend while an effective irrigation area showed positive non-significant contribution to grain production. Analysis based on different representative concentration pathways exhibited that maximum temperature may contribute negatively to grain production in the future. Overall, the analysis showed that climate change has a significant contribution to grain production. In conclusion, the implications for future research and policymakers have been addressed. Particularly, the importance of considering regional differences in adaptation planning in agricultural regions was also considered.

     

The impact of urbanization and consumption patterns on China’s black carbon emissions based on input–output analysis and structural decomposition analysis

Environmental Science and Pollution Research - Urbanization in China has dramatically increased from 39.10 in 2002 to 58.52% in 2017. Studies have discussed the impacts of urbanization and its...     

Efficient model calibration method based on phase experiments for anaerobic–anoxic/nitrifying (A2N) two-sludge process

A systematic calibration and validation procedure for the complex mechanistic modeling of anaerobic–anoxic/nitrifying (A2N) two-sludge system is needed. An efficient method based on phase experiments, sensitivity analysis, and genetic algorithm is proposed here for model calibration. Phase experiments (anaerobic phosphorus release, aerobic nitrification, and anoxic denitrifying phosphate accumulation) in an A2N sequencing batch reactor (SBR) were performed to reflect the process conditions accurately and improve the model calibration efficiency. The calibrated model was further validated using 30 batch experiments and 3-month dynamic continuous flow (CF) experiments for A2N-SBR and CF-A2N process, respectively. Several statistical criteria were conducted to evaluate the accuracy of model predications, including the average relative deviation (ARD), mean absolute error (MAE), root mean square error (RMSE), and Janus coefficient. Visual comparisons and statistical analyses indicated that the calibrated model could provide accurate predictions for the effluent chemical oxygen demand (COD), ammonia nitrogen (NH₄ ⁺-N), total nitrogen (TN), and total phosphorus (TP), with only one iteration.

     

A retrospective study on dioxins and dioxin-like polychlorinated biphenyls in milk and dairy products from the Latium region (Italy) over a 7-year study period (2011–2017)

Environmental Science and Pollution Research - This study reports the data of polychlorinated dibenzo-p-dioxins (PCDDs), -furans (PCDFs), and polychlorinated biphenyls dioxin-like (dl PCBs)...     

Testing the impact of real interest rate,income, and energy consumption on Turkey’s CO2 emissions

Environmental Science and Pollution Research - This paper aims to explore the impact of real interest rates (RIN), income, trade, foreign direct investment (FDI), and energy consumption on...     

Exploring the impact of transition in energy mix on the CO2 emissions from China’s power generation sector based on IDA and SDA

Environmental Science and Pollution Research - The energy transition from coal and oil to renewable energy, nuclear energy, and natural gas is a fundamental way for emission reduction of...     

The impact of climate change coping and adaptation strategies on livestock farmers’ technical efficiency: the case of rural Ghana

Environmental Science and Pollution Research - Compared with developed nations, developing countries are more vulnerable to climate change and variability. In this study, a coping and adaptation...     

Review on China’s wind power policy (1986–2017)

As an important renewable energy source, wind power plays a key role in mitigating climate change and has become one of the fastest growing clean energies globally. In China, wind energy development has been a vital component of national energy transformation strategy. Over the years, the Chinese government has introduced a series of policies to promote the development of wind power and also to regulate this emerging industry. Base on examining all the key policy documents on wind power issued by the Chinese government over the last 30 years, we find that China has built up a comprehensive policy system, and summarized the current framework of Chinese wind power policy systematically. Then, we analyze the policy objectives, policy tools, major measures, their results in each development stage, and the characteristics and trends of China’s wind power policies. Finally, we discuss the limitations of the current policy and put forward corresponding suggestions.

     

Stable carbon isotope analysis (δ13C values) of polybrominated diphenyl ethers and their UV-transformation products

Polybrominated diphenyl ethers (PBDEs) are frequently detected in food and environmental samples. We used compound specific isotope analysis to determine the δ¹³C values of individual PBDEs in two technical mixtures. Within the same technical product (DE-71 or DE-79), BDE congeners were the more depleted in ¹³C the higher brominated they were. In contrast, the products of light-induced hydrodebromination of BDE 47 and technical DE-79 were more enriched in ¹³C because of more stable bonds between ¹³C and bromine. As a result, the δ¹³C values of the irradiated solution progressed diametrically compared to those of the technical synthesis. The ratio of the δ¹³C values of BDE 47 to BDE 99 and of BDE 99 to BDE 153 are thus suggested as indicators to distinguish native technical products from transformation products. Ratios <1 are typical for native congeners (e.g. in DE-71) while the reversed ratio (>1) is typical of transformation products.     

Characteristics of columnar aerosol optical and microphysical properties retrieved from the sun photometer and its impact on radiative forcing over Skukuza (South Africa) during 1999–2010

Environmental Science and Pollution Research - The detailed analysis of columnar optical and microphysical properties of aerosols obtained from the AErosol RObotic NETwork (AERONET) Cimel sun...     

Estrogenic effects of dissolved organic matter and its impact on the activity of 17β-estradiol

Background and purpose  

The ubiquitous dissolved organic matter (DOM) is actually not inert as we always think, and the hormone-like effects of DOM have been reported. The objective of this study was to investigate the estrogenic effects of DOM and its impact on the activity of the natural estrogen 17β-estradiol (E2).     

Effects of Cutrine-Plus® algaecide and predators on wood frog (Lithobates sylvaticus) tadpole survival and growth

Copper contamination is increasing in many aquatic ecosystems. One mode by which copper can be introduced into aquatic ecosystems is as an algaecide, such as Cutrine-Plus®. Using a mesocosm experiment, we examined the effects of Cutrine-Plus® on wood frog (Lithobates sylvaticus) tadpoles. In addition, we examined how the presence of a nonnative predator the Western mosquitofish (Gambusia affinis) may interact with exposure to Cutrine-Plus®. Exposure to our low and high Cutrine-Plus® treatments had a strong negative effect on the wood frog tadpoles, and survivorship was greatly decreased in the low treatment, and no tadpoles survived in the high treatment. Additionally, the tadpoles that survived the low treatment were significantly smaller than those in the control treatment. Mosquitofish had no effect on the survivorship or growth of wood frog tadpoles, and mosquitofish presence did not have a significant interaction with the Cutrine-Plus® treatments. Cutrine-Plus® clearly had a negative effect on wood frog tadpoles at the concentrations used in our experiment, which were at and below the label-recommended dosages, suggesting that the use of Cutrine-Plus® in natural ponds may have negative consequences for wood frog populations and possibly other amphibians.     

The impact of heavy metals on the grey garden slug, Deroceras reticulatum (Müller): Metal storage, cellular effects and semi-quantitative evaluation of metal toxicity

Laboratory-reared grey garden slugs, Deroceras reticulatum, were exposed to soil and food treated with solutions of three metal salts (CdCl2, ZnCl2, PbCl2) in three environmentally relevant concentrations, each for 21 days. Metal concentrations were determined in the soil, food and slugs by atomic absorption spectrophotometry (AAS). Zinc was localized ultrastructurally in the hepatopancreatic cells by means of energy-filtering transmission electron microscopy (EFTEM). Zinc, and also high amounts of copper, could be detected by electron spectroscopical imaging (ESI) and electron energy loss spectroscopy (EELS) in spherites of the basophilic cells. Ultrastructural responses to metal impact were investigated in two cell types of the hepatopancreas (digestive and basophilic cells) and the cellular responses were found to be dose- and metal-dependent. In order to evaluate the toxicity of the respective metal concentrations to the slugs, the ultrastructural reactions were semi-quantified and summarized as complex reaction patterns of numerous organelles. This novel approach provides a basis for the use of data from standardized tests as a background for risk assessment studies in the field.     

The toxic effects of neem extract and azadirachtin on the brown planthopper, Nilaparvata lugens (Stål) (BPH) (Homoptera: Delphacidae)

Extracts of neem (Azadirachta indica A. Juss) are used in the developing world for many purposes including management of agricultural insect pests. The effects of different neem extracts (aqueous (NSKEaq), ethanol (NSKEeth) and hexane (NSKEhex)) on mortality, survival and weight of the brown planthopper, Nilaparvata lugens (St?l) (BPH) (Homoptera: Delphacidae) third and fourth nymphal instars were investigated. When fed rice plants treated with neem derivatives in bioassays, the survival of BPH nymphs is affected. Comparisons were made with the pure neem limonoid, azadirachtin (AZA) to ascertain its role as a compound responsible for these effects. AZA was most potent in all experiments and produced almost 100% nymphal mortality at 0.5 ppm and higher concentrations. When higher concentrations were applied, the effects appeared shortly after treatment and mortality was higher. Many insects died after remaining inactive for several days or during prolonged moulting. At lower concentrations, if moulting was achieved, disturbed growth and abnormalities were then likely to occur in the moulting process. Nymphs that were chronically exposed to neem extract showed a reduction in weight (45-60%). The results clearly indicate the simple NSKE (aqueous, ethanolic or both), containing low concentrations of AZA, can be used effectively to inhibit the growth and survival of BPH.     

Multilingual education of students on a global scale and perspective—international networking on the example of bioindication and biomonitoring (B&B technologies)

Living or formerly living organisms are being used to obtain information on the quality of the general health status of our environment by bioindication and biomonitoring methods for many decades. Thus, different roads toward this common scientific goal were developed by a lot of different international research groups. Global cooperation in between various scientific teams throughout the world has produced common ideas, scientific definitions, and highly innovative results of this extremely attractive working field. The transdisciplinary approach of different and multifaceted scientific areas—starting from biology, analytical chemistry, via health physics, up to social and economic issues—have surpassed mental barriers of individual scientists, so that “production” of straightforward common results related to the influence of material and immaterial environmental factors to the well-being of organisms and human life has now reached the forefront of international thinking. For the further sustainable development of our common scientific “hobby” of bioindication and biomonitoring, highest personal energy has to be given by us, being teachers to our students and to convince strategically decision makers as politicians to invest (financially) into the development of education and research of this innovative technique. Young people have to be intensively convinced on the “meaning” of our scientific doing, e.g., by extended forms of education. One example of multilingual education of students on a global scale and perspective is given here, which we started about 3 years ago.