Leaching behavior of Cr(III) in stabilized/solidified soil

The leaching behavior of chromium was studied using batch leaching tests, surface complexation modeling and X-ray absorption near edge structure (XANES) spectroscopy. A contaminated soil sample containing 1330 mg-Cr kg(-1) and 25600 mg-Fe kg(-1) of dry soil was stabilized/solidified (S/S) with 10% cement, 25% cement, 10% lime and a mixture of 20% flyash and 5% lime. The XANES analysis showed that Cr(III) was the only Cr species in untreated soil and S/S-treated samples. The leachate Cr concentration determined using the toxicity characteristic leaching procedure (TCLP) was reduced from 5.18 mg l(-1) for untreated soil to 0.84 mg l(-1) for the sample treated with 25% cement. The Cr leachability in untreated and treated soil samples decreased dramatically as the pH increased from 3 to 5, remained at similar levels in the pH range between 5 and 10.5, and further decreased at pH>10.5. Modeling results indicated that the release of Cr(III) was controlled by adsorption on iron oxides at pH<10.5, and by precipitation of Ca(2)Cr(2)O(5).6H(2)O at pH>10.5.     

Uptake studies of environmentally hazardous (51)Cr in Mung beans

Attempt has been made to study the accumulation behaviour of a common plant, Mung bean (Vigna radiata) towards Cr(III) and Cr(VI) to have an insight on the migration and bio-magnification of Cr. For this purpose healthy germinated Mung bean seeds were sown in the sand in the presence of Hoagland's nutrient solution containing measured amount of K(2)(51)Cr(2)O(7) and (51)Cr(NO(3))(3).9H(2)O. Growth rate was also studied in the presence and absence of phosphate salts in the medium. It has been found that the transfer of chromium from soil to plant is significantly low (maximum 5% for both Cr(III) and Cr(VI)). Maximum accumulation of Cr occurs in the root with respect to the total chromium accumulation by the plant. Other parts of the Mung bean plant, e.g. cotyledons, shoot and leaves, show negligible accumulation. Therefore, the chance of direct intake of Cr through food as well as through the grazing animals to human body is less.     

A Cr(VI)-reducing Microbacterium sp. strain SUCR140 enhances growth and yield of Zea mays in Cr(VI) amended soil through reduced chromium toxicity and improves colonization of arbuscular mycorrhizal fungi

Pot culture experiments were conducted in a glasshouse to evaluate the effects of four efficient Cr(VI)-reducing bacterial strains (SUCR44, SUCR140, SUCR186, and SUCR188) isolated from rhizospheric soil, and four arbuscular mycorrhizal fungi (AMF—Glomus mosseae, G. aggregatum, G. fasciculatum, and G. intraradices) alone or in combination, on Zea mays in artificially Cr(VI)-amended soil. Presence of a strain of Microbacterium sp. SUCR140 reduced the chromate toxicity resulting in improved growth and yields of plants compared to control. The bioavailability of Cr(VI) in soil and its uptake by the plant reduced significantly in SUCR140-treated plants; the effects of AMF, however, either alone or in presence of SUCR140 were not significant. On the other hand, presence of AMF significantly restricted the transport of chromium from root to the aerial parts of plants. The populations of AMF chlamydospores in soil and its root colonization improved in presence of SUCR140. This study demonstrates the usefulness of an efficient Cr(VI)-reducing bacterial strain SUCR140 in improving yields probably through reducing toxicity to plants by lowering bioavailability and uptake of Cr(VI) and improving nutrient availability through increased mycorrhizal colonization which also restricted the transport of chromium to the aerial parts.     

Graphical estimation of the dual-enzyme kinetic parameters for Cr(VI) reduction

Chromium(VI) (Cr(VI)) contamination of soil and groundwater is a major environmental concern. Bioreduction of Cr(VI) by Shewanella oneidensis MR-1 (MR-1) can be considered a feasible option to reduce the toxic and mobile Cr(VI) to the less toxic and less mobile chromium(III) (Cr(III)). The reaction rate expression for Cr(VI) reduction is nonlinear and the rate constants are evaluated by employing nonlinear optimization techniques. The outcome of the optimization techniques, in general, depends on the initial estimate of the kinetic parameters which is not always available. A graphical approach based on sound mathematical reasoning has been developed which is accurate, simpler to use, and can provide the best initial estimate for nonlinear optimization.     

Column study of Cr(VI) removal by cationic hydrogel for in-situ remediation of contaminated groundwater and soil

Column experiments were conducted for examining the effectiveness of the cationic hydrogel on Cr(VI) removal from groundwater and soil. For in-situ groundwater remediation, the effects of background anions, humic acid (HA) and pH were studied. Cr(VI) has a higher preference for being adsorbed onto the cationic hydrogel than sulphate, bicarbonate ions and HA. However, the adsorbed HA reduced the Cr(VI) removal capacity of the cationic hydrogel, especially after regeneration of the adsorbents, probably due to the blockage of adsorption sites. The Cr(VI) removal was slightly influenced by the groundwater pH that could be attributed to Cr(VI) speciation. The 6-cycle regeneration and reusability study shows that the effectiveness of the cationic hydrogel remained almost unchanged. On average, 93% of the adsorbed Cr(VI) was recovered in each cycle and concentrated Cr(VI) solution was obtained after regeneration. For in-situ soil remediation, the flushing water pH had an insignificant effect on the release of Cr(VI) from the soils. Multiple-pulse flushing increased the removal of Cr(VI) from the soils. In contrast, more flushing water and longer operation may be required to achieve the same removal level by continuous flushing.     

Reduction of Cr(VI) by malic acid in aqueous Fe-rich soil suspensions

Detoxification of Cr(VI) through reduction by organic reductants has been regarded as an effective way for remediation of Cr(VI)-polluted soils. However, such remediation strategy would be limited in practical applications due to the low Cr(VI) reduction rate. In this study, the catalytic effect of two Fe-rich soils (Ultisol and Oxisol) on Cr(VI) reduction by malic acid was evaluated. As the results shown, the two soils could obviously accelerate the reduction of Cr(VI) by malic acid at low pH conditions, while such catalytic effect was gradually suppressed as the increase in pH. After reaction for 48 h at pH 3.2, Oxalic acid was found in the supernatant of Ultisol, suggesting the oxidization of hydroxyl in malic acid to carboxyl and breakage of the bond between C₂ and C₃. It was also found that the catalytic reactivity of Ultisol was more significant than that of Oxisol, which could be partly attributed to the fact that the amount of Fe(II) released from the reductive dissolution of Ultisol by malic acid was larger than that of Oxisol. With addition of Al(III), the catalytic effect from Ultisol was inhibited across the pH range examined. On the contrary, the presence of Cu(II) would increase the catalytic effect of Ultisol, which was more pronounced with the increase in pH. This study proposed a potential way for elimination of the environmental risks posed by the Cr(VI) contamination by use of the natural soil surfaces to catalyze Cr(VI) reduction by the organic reductant such as malic acid, a kind of organic reductant originating from soil organic decomposition process or plant excretion.     

Terrestrial and aquatic ecotoxicity assessment of Cr(VI) by the ReCiPe method calculation (LCIA): application on an old industrial contaminated site

The most stable forms of chromium in the environment are chromium (III) and chromium (VI), the former being relatively immobile and necessary for organisms, and the latter being highly soluble and toxic. It is thus important to characterise ecotoxicological impacts of Cr(VI). However, there are still some important uncertainties in the calculation of ecotoxicological impacts of heavy metals in the LCIA global approach. The aim of this paper is to understand how the spatial and dynamic characterization of life cycle inventory (LCI) data can be exploited in life cycle impact assessment and particularly for the evaluation of the aquatic and terrestrial ecotoxicity of Cr(VI). To quantify these impacts, we studied an industrial waste landfill in the North of France that was contaminated with chromium. On the polluted area, the aquatic contamination is due to the slag heap as well as to chromium spots in soil. The soil contamination is mainly due to infiltration of chromium from the infill. The concentration of Cr(VI) in soil and water varies according to seasonal climatic variations and groundwater level. These variations have an effect on the Cr(VI) fate factor, in particular on transfer and residence time of the substance. This study underlines the spatial distribution of aquatic ecotoxicity and the temporal variation of freshwater ecotoxicity. We analysed the correlation between precipitation, temperature, concentration and ecotoxicity impact. With regards to the terrestrial ecotoxicity, the study focused on the vertical variation of the ecotoxicity and the major role of the soil layer composition into terrestrial pollution.     

Species-dependent chromium accumulation, lipid peroxidation, and glutathione levels in germinating kiwifruit pollen under Cr(III) and Cr(VI) stress

The accumulation of chromium by germinating kiwifruit pollen appears to be significantly affected by Cr species, Cr concentration and calcium availability. Cr(III) accumulation always occurred in a linear manner while Cr(VI) uptake followed a logarithmic model. In the absence of exogenous calcium, Cr(III) accumulation was much higher than that of Cr(VI). It was observed that, as the Cr(III) concentration increased, there was a significant decrease in the endogenous calcium content of pollen, ultimately leading to complete calcium depletion after 90 min of incubation at 150 microM Cr(III). This loss of calcium could be responsible for the strong inhibition of tube emergence and growth following exposure of pollen to Cr(III). Indeed, when exogenous calcium was added to the kiwifruit pollen culture medium, significant growth recovery and reduced Cr(III) uptake occurred; the opposite was true in Cr(VI)-treatments. A significant rise in lipid peroxide production occurs in the presence of both Cr species; the effect was more pronounced following Cr(VI) exposure. Finally, glutathione pool dynamics appears to be differentially affected by chromium species and concentrations. In conclusion, results of the present study have provided important information regarding the different activity profiles of Cr(III) and Cr(VI) in relation to kiwifruit pollen performance, and have also demonstrated differences in some biochemical responses of pollen to metal stress.     

Cr(VI) uptake mechanism of Bacillus cereus

In this study, we investigated the Cr(VI) uptake mechanism in an indigenous Cr(VI)-tolerant bacterial strain -Bacillus cereus through batch and microscopic experiments. We found that both the cells and the supernatant collected from B. cereus cultivation could reduce Cr(VI). The valence state analysis revealed the complete transformation from Cr(VI) into Cr(III) by living B. cereus. Further X-ray absorption fine structure and Fourier transform infrared analyses showed that the reduced Cr(III) was coordinated with carboxyl and amido functional groups from either the cells or supernatant. Scanning electron microscopy and atomic force microscopy observation showed that noticeable Cr(III) precipitates were accumulated on bacterial surfaces. However, Cr(III) could also be detected in bacterial inner portions by using transmission electron microscopy thin section analysis coupled with energy dispersive X-ray spectroscopy. Through quantitative analysis of chromium distribution, we determined the binding ratio of Cr(III) in supernatant, cell debris and cytoplasm as 22%, 54% and 24%, respectively. Finally, we further discussed the role of bacterium-origin soluble organic molecules to the remediation of Cr(VI) pollutants.     

Process enhancing strategies for the reduction of Cr(VI) to Cr(III) via photocatalytic pathway

Environmental Science and Pollution Research - This discourse aimed at providing insight into the strategies that can be adopted to boost the process of photoreduction of Cr(VI) to Cr(III). Cr(VI)...     

Mobility and recalcitrance of organo-chromium(III) complexes

Hexavalent chromium [Cr(VI)] is a major industrial pollutant. Bioremediation of Cr(VI) to Cr(III) is a viable clean-up approach. However, Cr(VI) bioreduction also produces soluble organo–Cr(III) complexes, and little is known about their behavior in the environment. When tested with soil columns, citrate–Cr(III) showed little sorption to soil; malate–Cr(III) had limited partitioning with soil; and histidine–Cr(III) exhibited significant interaction with soil. It appears that the mobility varies depending on the organic ligand. Further, Ralstonia eutropha JMP 134 and Pseudomonas aeruginosa pAO1 readily degraded malate, citrate, and histidine, but not the corresponding organo–Cr(III) complexes. The recalcitrance is not due to toxicity, but the complexes are likely to cause hindrance to enzymes, as malate dehydrogenase and amino acid oxidase could not use malate–Cr(III) and histidine–Cr(III), respectively. The data are in agreement with the reports of soluble organo–Cr(III) complexes in the environment.     

Simultaneous extraction of Cr(VI) and Cu(II) from humic acid with new synthesized EDTA derivatives

Soil washing is one of the few permanent treatment alternatives for removing metal contaminants. Ethylenediaminetetraacetic acid and its salts (EDTA) is very effective at removing cationic metals and has been utilized globally. However it is ineffective for anionic metal contaminants or metals bound to soil organic matter. The simultaneous removal of cationic and anionic metal contaminants by soil washing is difficult due to differences in their properties. The present study evaluated the potential of a washing process using two synthesized EDTA-derivatives, C₆HEDTA (2,2′-((2-((carboxymethyl)(2-(hexanoyloxy)ethyl)amino)ethyl)azanediyl)diacetic acid) and C₁₂HEDTA (2,2′-((2-((carboxymethyl) (2-(dodecanoyloxy)ethyl)amino)ethyl)azanediyl)diacetic acid), which consist of a hydrophilic polycarboxylic moiety and a hydrophobic moiety with a monoalkyl ester group. A series of equilibrium batch experiments at room temperature were conducted to investigate the efficacy of C₆HEDTA and C₁₂HEDTA as extractants for both oxyanion Cr(VI) and cationic Cu(II). Results showed that either C₆HEDTA or C₁₂HEDTA can extract both Cr(VI) and Cu(II) from humic acid simultaneously. However, C₆HEDTA was less effective for Cr(VI) probably because it has no surface activities to increase solubility of humic acid, like C₁₂HEDTA. Extraction of Cr(VI) was mainly attributed to the decreased surface tension and enhanced solubility of organic matter. Extraction of Cu(II) was attributed to both the Cu(II) chelation and enhanced solubility of humic acid. It was demonstrated that the hydrophilic polycarboxylic moiety of C₁₂HEDTA chelates cations while the monoalkyl ester group produces surface active properties that enhance the solubility of humic acid.     

Simultaneous Cr(VI) reduction and phenol degradation using Stenotrophomonas sp. isolated from tannery effluent contaminated soil

This study presents simultaneous hexavalent chromium (Cr(VI)) reduction and phenol degradation using Stenotrophomonas sp., isolated from tannery effluent contaminated soil. Phenol was used as the sole carbon and energy source for Cr(VI) reduction. The optimization of different operating parameters was done using Placket–Burman design (PBD) and Box–Behnken design (BBD). The significant operating variables identified by PBD were initial Cr(VI) and phenol concentration, pH, temperature, and reaction time. These variables were optimized by a three-level BBD and the optimum initial Cr(VI) concentration, initial phenol concentration, pH, temperature, and reaction time obtained were 16.59 mg/l, 200.05 mg/l, 7.38, 31.96 °C and 4.07 days, respectively. Under the optimum conditions, 81.27 % Cr(VI) reduction and 100 % phenol degradation were observed experimentally. The results concluded that the Stenotrophomonas sp. could be used to decontaminate the effluents containing Cr(VI) and phenol effectively.     

汞、铅、铬污染土壤的微生物修复

利用裂褶菌(Schizophyllum commune)GGHN08-116菌株,以棉籽壳、玉米秸等为固体发酵底物修复受汞、铅、铬污染的土壤。通过菌丝穿透重度重金属土壤实验,研究了菌丝在穿透土壤过程对交换态重金属的影响以及该菌株子实体对重金属离子的富集能力,同时,通过盆栽实验研究了在重度重金属污染土壤上,施用不同比例的固体发酵料对污染土壤中汞、铅、铬及其胡萝卜根茎质量、产量的影响,研究结果表明,该菌株能穿透厚度为5 cm的土壤,并有子实体生成,土壤pH值略有下降,与对照差异不显著;与对照相比,土壤中交换态汞、铬含量均显著下降,而交换态铅差异不显著,子实体中除汞含量符合标准外,铅、铬均超出了GB 7096-2003,GB 2762-2005规定标准。在固体发酵料处理下土壤中交换态汞、铅、铬含量均显著下降,胡萝卜根茎中均未检测到汞、铅含量,铬含量也符合GB 2762-2005规定标准。GGHN08-116菌株及其固体发酵产物具有修复受重金属污染土壤的能力。     

Effect of N-hydroxyethyl-ethylenediamine-triacetic acid (HEDTA) on Cr(VI) reduction by Fe(II)

The complexation of Fe(II) with organic ligand results in the decrease of redox potential, and enhances the reduction ability of Fe(II). An important example is the use of Fe(II)-organic complexes to accelerate Cr(VI) reduction. Dissolved O(2) and light can potentially affect Cr(VI) reduction; however, these two factors have not been adequately evaluated. A batch technique was used to investigate the Cr(VI) reduction as influenced by the light and dissolved O(2) using N-hydroxyethyl-ethylenediamine-triacetic acid (HEDTA) and Fe(II) solutions. The oxidation of Fe(II) by dissolved O(2) was rapid in the presence of HEDTA at low pH; nonetheless, the oxidation proceeded slowly when HEDTA was absent. Although Cr(VI) could be reduced by free Fe(II) at low pH, the reaction was considerably slower than that of systems involving HEDTA. The enhancement of Cr(VI) reduction by Fe(II) in the presence of high concentrations of HEDTA was achieved as a result of two processes. First, HEDTA acted as a ligand for expediting electron transfer between Fe(II) and Cr(VI). Secondly, HEDTA served as a reductant for Cr(VI) under illumination.     

Remediation of Cr(VI) from chromium slag by biocementation

Here we demonstrate a calcifying ureolytic bacterium Bacillus sp. CS8 for the bioremediation of chromate (Cr(VI)) from chromium slag based on microbially induced calcite precipitation (MICP). A consolidated structure like bricks was prepared from chromium slags using bacterial cells, and five stage Cr(VI) sequential extraction was carried out to know their distribution pattern. Cr(VI) mobility was found to significantly be decreased in the exchangeable fraction of Cr slag and subsequently, the Cr(VI) concentration was markedly increased in carbonated fraction after bioremediation. It was found that such Cr slag bricks developed high compressive strength with low permeability. Further, leaching behavior of Cr(VI) in the Cr slag was studied by column tests and remarkable decrease in Cr(VI) concentration was noticed after bioremediation. Cr slags from columns were characterized by SEM–EDS confirming MICP process in bioremediation. The incorporation of Cr(VI) into the calcite surface forms a strong complex that leads to obstruction in Cr(VI) release into the environment. As China is facing chromium slag accidents at the regular time intervals, the technology discussed in the present study promises to provide effective and economical treatment of such sites across the country, however, it can be used globally.     

Waste Fe(III)/Cr(III) hydroxide as adsorbent for the removal of Cr(VI) from aqueous solution and chromium plating industry wastewater

Fe(III)/Cr(III) hydroxide, a waste material from the fertilizer industry, has been used for the adsorption of Cr(VI) from aqueous solution, over a range of initial metal ion concentrations (5-30 mg litre(-1)), agitation times (1-180 min), adsorbent dosages (100-1200 mg per 50 ml), temperatures (24, 29 and 38 degrees C) and pH values (4.5-10). The adsorption of Cr(VI) increased with the initial concentration of Cr(VI) and with temperature. The process of uptake follows both the Langmuir and the Freundlich isotherm models. The applicability of Lagergren and empirical kinetic models has also been investigated. Almost quantitative removal of Cr(VI) at 10 mg litre(-1) in a 50-ml solution by 500 mg of adsorbent was found at an equilibrium pH of 5.6. The efficiency of chromium removal was also tested using wastewater from the chromium plating industry.     

Removal of Cr(VI) and humic acid by using TiO2 photocatalysis

The removal efficiencies of Cr(VI) and HA, using a TiO(2)-mediated photocatalytic process, were investigated with variations in the pH, TiO(2) dosage and Cr(VI)/HA ratio. During the photocatalytic reaction, the total removal of Cr(VI) occurred through adsorption onto TiO(2), as well as its reduction to Cr(III). However, oxidation and adsorption were identified as important removal processes for the treatment of HA. Due to the anionic type adsorption onto TiO(2) and its acid-catalyzed photocatalytic reduction, the removal of Cr(VI) decreased with increasing pH, while that of HA increased with increasing pH. The TiO(2) dosage was also an important parameter for the removal of Cr(VI). As the TiO(2) dosage was increased to 2.5 g l(-1), the removal of Cr(VI) was continuously enhanced, but decreased at dosages above 3 g l(-1) due to the increased blockage of the incident UV light used for the photocatalytic reaction. The removal of Cr(VI) was greatly enhanced when the system contained both HA and Cr(VI) compared to Cr(VI) alone. Also, the removal of HA was greatly enhanced when the system contained both HA and Cr(VI) compared to HA alone. The removal of Cr(VI) was continuously enhanced as the HA concentration gradually increased; however, no further increase was observed above 20 mg l(-1) HA due to the increased absorption of the UV light. This result supports that the photocatalytic reaction, with illuminated TiO(2), could be applied to more effectively treat wastewater containing both Cr(VI) and HA than that containing a single species only.     

Reduction of Cr(VI) by caffeic acid

In the soil-plant system, the Cr(VI) toxicity can be moderated through redox reactions involving phenolic substances. In such a context, we report the reducing activity of caffeic acid (CAF) towards Cr(VI) in aqueous phase. The redox reaction between Cr(VI) and CAF was studied as a function of both time and pH at different initial metal concentrations. The reaction was particularly effective at pH 2.5. The kinetic data indicate that the reaction proceeds through two steps: the first is faster and involves four electrons, the latter, which is slower, five electrons. The chromatograms evidence the formation of oxidation products (OP) with a different redox activity towards Cr(VI). A yield of Cr(III) equal to that obtained at pH 2.5 and pH 3.1 in about 7 and 25 h, respectively, was reached at pH 4.2 only after a much longer reaction time (50h). At pH>4.2 the reaction occurred even more slowly, and its kinetic trend was more and more difficult to study at pH values higher than 5.0 due to the formation of precipitates. Other phenolics investigated (o-, m-, p-coumaric acids) showed a reducing activity negligible compared to that of CAF: about 30% of p-coumaric acid was oxidized at pH 2.5 only after two months of reaction.