Can adsorption isotherms predict sediment bioavailability?

The adsorption and desorption of 2,4-dichlorophenol (DCP) and pentachlorophenol (PCP) were studied for a range of synthetic particles, a dimethylditallowammonium exchanged clay and a natural sediment. The synthetic particles were Dowex 1X8400, Toyopearl Phenyl 650M and Toyopearl SP 650M. The bioaccumulation of the DCP and PCP from these particles was then studied using the oligochaete, Lumbriculus variegatus. There is a correlation between contaminant-particle interactions, as determined from adsorption and desorption isotherms, and bioaccumulation. Bioaccumulation by L. variegatus was found to be highest from the systems where differences in the classification of adsorption and desorption isotherms were observed.     

Using of “pseudo-second-order model” in adsorption

A research paper's contribution exists not only in its originality and creativity but also in its continuity and development for research that follows. However, the author easily ignores it. Citation error and quotation error occurred very frequently in a scientific paper. Numerous researchers use secondary references without knowing the original idea from authors. Sulaymon et al. (Environ Sci Pollut Res 20:3011–3023, 2013) and Spiridon et al. (Environ Sci Pollut Res 20:6367–6381, 2013) presented wrong pseudo-second-order models in Environmental Science and Pollution Research, vol. 20. This comment pointed the errors of the kinetic models and offered information for citing original idea of pseudo-second-order kinetic expression. In order to stop the proliferation of the mistake, it is suggested to cite the original paper for the kinetic model which provided greater accuracy and more details about the kinetic expression.     

Application of HYDRUS 1D model for assessment of phenol–soil adsorption dynamics

Laboratory-scale batch, vertical, and horizontal column experiments were conducted to investigate the attenuative capacity of a fine-grained clayey soil of local origin in the surrounding of a steel plant wastewater discharge site in West Bengal, India, for removal of phenol. Linear, Langmuir, and Freundlich isotherm plots from batch experimental data revealed that Freundlich isotherm model was reasonably fitted (R ²?=?0.94). The breakthrough column experiments were also carried out with different soil bed heights (5, 10, and 15 cm) under uniform flow to study the hydraulic movements of phenol by evaluating time concentration flow behavior using bromide as a tracer. The horizontal migration test was also conducted in the laboratory using adsorptive phenol and nonreactive bromide tracer to explore the movement of solute in a horizontal distance. The hydrodynamic dispersion coefficients (D) in the vertical and horizontal directions in the soil were estimated using nonlinear least-square parameter optimization method in CXTFIT model. In addition, the equilibrium convection dispersion model in HYDRUS 1D was also examined to simulate the fate and transport of phenol in vertical and horizontal directions using Freundlich isotherm constants and estimated hydrodynamic parameters as input in the model. The model efficacy and validation were examined through statistical parameters such as the coefficient of determination (R ²), root mean square error and design of index (d).     

Response to “Using of ‘pseudo-second-order model’ in adsorption”, comment letter on “Phenol removal from wastewater by adsorption on zeolitic composite” [Bizerea Spiridon et al., Environ Sci Pollut Res (2013) 20:6367–6381]

This letter is a response to the issues put forth by Dr. Y.S. Ho with regard to the article “Phenol removal from wastewater by adsorption on zeolitic composite” as reported by Bizerea Spiridon et al. (Environ Sci Pollut Res 20:6367–6381, 2013). The response proposes to clarify the error slipped in the typewritten linearized equation of the pseudo-second-kinetic model and the reason for using secondary reference regarding this model.     

Alginate beads containing water treatment residuals for arsenic removal from water—formation and adsorption studies

Water treatment residuals (WTRs) produced in large quantities during deironing and demanganization of infiltration water, due to high content of iron and manganese oxides, exhibit excellent sorptive properties toward arsenate and arsenite. Nonetheless, since they consist of microparticles, their practical use as an adsorbent is limited by difficulties with separation from treated solutions. The aim of this study was entrapment of chemically pretreated WTR into calcium alginate polymer and examination of sorptive properties of the obtained composite sorbent toward As(III) and As(V). Different products were formed varying in WTR content as well as in density of alginate matrix. In order to determine the key parameters of the adsorption process, both equilibrium and kinetic studies were conducted. The best properties were exhibited by a sorbent containing 5 % residuals, formed in alginate solution with a concentration of 1 %. In slightly acidic conditions (pH 4.5), its maximum sorption capacity was 3.4 and 2.9 mg g^?1 for As(III) and As(V), respectively. At neutral pH, the adsorption effectiveness decreased to 3.3 mg As g^?1 for arsenites and to 0.7 mg As g^?1 for arsenates. The presence of carboxylic groups in polymer chains impeded in neutral conditions the diffusion of anions into sorbent beads; therefore, the main rate-limiting step of the adsorption, mainly in the case of arsenates, was intraparticle diffusion. The optimal condition for simultaneous removal of arsenates and arsenites from water by means of the obtained composite sorbent is slightly acidic pH, ensuring similar adsorption effectiveness for both arsenic species.     

Simultaneous adsorption and degradation of γ-HCH by nZVI/Cu bimetallic nanoparticles with activated carbon support

Cu amended zero valent iron bimetallic nanoparticles were synthesized by doping Cu on the surface of iron. They were incorporated with granular activated carbon (AC) to prepare supported particles (AC-Fe⁰-Cu), which were used to remove γ-HCH. Cu on the surface of iron enhanced the dechlorination activity of Fe⁰. The dechlorination rate constant (k_obs) increased with the Cu loading on the surface of iron and the maximum was achieved with 6.073% Cu. AC as a support was effective for increasing the dispersion of the nanoparticles and avoiding the agglomeration of the metallic nanoparticles. The simultaneous adsorption of γ-HCH on AC accelerated the degradation rate of γ-HCH by the bimetals. After reaction for 165 min, around 99% of γ-HCH was removed by the solids of AC-Fe⁰-Cu. In addition, AC could adsorb the degradation products. The degradation of γ-HCH was mainly through dehydrochlorination and dichloroelmination based on the intermediate products detected by GC/MS.     

Impact of sewage sludge spreading on nickel mobility in a calcareous soil: adsorption–desorption through column experiments

A soil column adsorption–desorption study was performed on an agricultural calcareous soil to determine the impact of sewage sludge spreading on nickel mobility. Ni adsorption experiments were followed by desorption tests involving the following liquid extractants: water, calcium (100 mg/L), oxalic acid (525 mg/L equivalent to 100 mg carbon/L), and sludge extracts (0.5 and 2.5 g/L). Desorption tests were also conducted after sewage sludge spreading at three application rates (30, 75, and 150 t/ha). According to the breakthrough curve, Ni adsorption was irreversible and occurred mainly through interactions with calcite surface sites. Nickel desorption from the soil column was promoted in presence of significant dissolved organic carbon (DOC) concentration as observed with oxalic acid elution and sludge extract at 2.5 g/L. In sludge-amended soil columns, the maximum Ni levels occurred in first pore volumes, and they were positively correlated to the sludge application rate. The presence of DOC in leaching waters was the main factor controlling Ni desorption from the sludge-amended soil columns. This finding implies that DOC generated by sludge applied on calcareous soils might facilitate the leaching of Ni due to the formation of soluble Ni–organic complexes. Thus, sludge application can have potential environmental impacts in calcareous soils, since it promotes nickel transport by decreasing Ni retention by soil components.     

Dynamic behaviour of Cd2+ adsorption in equilibrium batch studies by CaCO3 −-rich Corbicula fluminea shell

This work presents the structural and adsorption properties of the CaCO₃ ^?-rich Corbicula fluminea shell as a natural and economic adsorbent to remove Cd ions from aqueous solutions under batch studies. Experiments were conducted with different contact times, various initial concentrations, initial solution pH and serial biosorbent dosage to examine the dynamic characterization of the adsorption and its influence on Cd uptake capacity. The characterization of the C. fluminea shell using SEM/EDX revealed that the adsorbent surface is mostly impregnated by small particles of potentially calcium salts. The dominant Cd adsorption mechanism is strongly pH and concentration dependent. A maximum Cd removal efficiency of 96.20 % was obtained at pH 7 while the optimum adsorbent dosage was observed as 5 g/L. The Langmuir isotherm was discovered to be more suitable to represent the experimental equilibrium isotherm results with higher correlation coefficients (R ²?>?0.98) than Freundlich (R ²?<?0.97).The correlation coefficient values (p?<?0.01) indicated the superiority of the Langmuir isotherm over the Freundlich isotherm.     

Removal of anionic azo dye from aqueous solution via an adsorption–photosensitized regeneration process on a TiO2 surface

Textile dye effluents are typically characterized by strong color and recalcitrance, even at very low concentration. The process of enrichment of anionic azo dye on the surface of TiO₂ fibers followed by photosensitization degradation under ambient air conditions was extensively investigated. Adsorption isotherms and zeta potentials were used to describe the “dye/TiO₂ surface” interface, taking into account the effects of pH on the nature and population of the surface groups on the TiO₂ fibers. The extent of the photocatalytic degradation of dye on TiO₂ surface was determined by FTIR. N₂ adsorption isotherms and optical spectra were employed to investigate the effect of photosensitization. The adsorption of dyes on the TiO₂ surface occurs via electrostatic attraction through the formation of single- or multidentate-coordinated surface complexes. Almost complete photobleaching of the absorption band at 534 nm is achieved in ~4 h. Dye-sensitized TiO₂ fiber could absorb part of the visible light spectrum (λ?<?600 nm). Interfacial electron transfer can potentially alter the degradation efficiency. The regenerated TiO₂ fiber could be reused for subsequent decolorization without a decline in adsorption efficiency compared with freshly prepared TiO₂ samples, which may be attributed to preservation of the hierarchical pore structure and restoration of the original surface properties. In summary, we propose an efficient “adsorption–photoregeneration–reuse” process applying TiO₂ fibers for the degradation of dyes in water.     

Removal of xenobiotics from effluent discharge by adsorption on zeolite and expanded clay: an alternative to activated carbon?

Xenobiotics such as pesticides and pharmaceuticals are an increasingly large problem in aquatic environments. A fixed-bed adsorption filter, used as tertiary stage of sewage treatment, could be a solution to decrease xenobiotics concentrations in wastewater treatment plants (WWTPs) effluent. The adsorption efficiency of two mineral adsorbent materials (expanded clay (EC) and zeolite (ZE)), both seen as a possible alternative to activated carbon (AC), was evaluated in batch tests. Experiments involving secondary treated domestic wastewater spiked with a cocktail of ten xenobiotics (eight pharmaceuticals and two pesticides) known to be poorly eliminated in conventional biological process were carried out. Removal efficiencies and partitions coefficients were calculated for two levels of initial xenobiotic concentration, i.e, concentrations lower to 10 μg/L and concentrations ranged from 100 to 1,000 μg/L. While AC was the most efficient adsorbent material, both alternative adsorbent materials showed good adsorption efficiencies for all ten xenobiotics (from 50 to 100 % depending on the xenobiotic/adsorbent material pair). For all the targeted xenobiotics, at lower concentrations, EC presented the best adsorption potential with higher partition coefficients, confirming the results in terms of removal efficiencies. Nevertheless, Zeolite presents virtually the same adsorption potential for both high and low xenobiotics concentrations to be treated. According to this first batch investigation, ZE and EC could be used as alternative absorbent materials to AC in WWTP.     

Response surface modelling of Cr6+ adsorption from aqueous solution by neem bark powder: Box–Behnken experimental approach

The main aim of this study is to investigate the combined effect of different operating parameters like adsorbent dose, initial Cr⁶⁺ concentration and pH on the removal of Cr⁶⁺ from aqueous solution using neem bark powder (NBP). A series of batch experiments were performed to find out the adsorption isotherms and kinetic behaviour of Cr⁶⁺ in the aqueous solution. The adsorption process was examined with three independent variables viz. NBP dosage, initial Cr⁶⁺ concentrations and pH. Seventeen batch experiments designed by Box–Behnken using response surface methodology were carried out, and the adsorption efficiency was modelled using polynomial equation as the function of the independent variables. Based on the uptake capacity and economic use of adsorbent, the independent variables were optimized by two procedures. The desirability of first and second optimization procedures were found to be 1.00 and 0.84, respectively, which shows that the estimated function may well represent the experimental model. The kinetic study indicated that the rate of adsorption confirms to the pseudo-second-order rate equation. Thermodynamics study indicated that the adsorption process was spontaneous and endothermic in nature. The surface texture changes in NBP were obtained from FT-IR analysis. The optimized result obtained from RAMP plots revealed that the NBP was supposed to be an effective and economically feasible adsorbent for the removal of Cr⁶⁺ from an aqueous system.     

Basiswissen Umwelttechnik Wasser, Luft, Abfall, L?rm, Umweltrecht Hrsg: Bank, Matthias

Ohne Zusammenfassung     

Toxicity, dioxin-like activities, and endocrine effects of DDT metabolites—DDA, DDMU, DDMS, and DDCN

Background, aim, and scope  

2,2-bis(chlorophenyl)-1,1,1-trichloroethane (DDT) metabolites, other than those routinely measured [i.e., 2,2-bis(chlorophenyl)-1,1-dichloroethylene (DDE) and 2,2-bis(chlorophenyl)-1,1-dichloroethane (DDD)], have recently been detected in elevated concentrations not only in the surface water of Teltow Canal, Berlin, but also in sediment samples from Elbe tributaries (e.g., Mulde and Havel/Spree). This was paralleled by recent reports that multiple other metabolites could emerge from the degradation of parent DDT by naturally occurring organisms or by interaction with some heavy metals. Nevertheless, only very few data on the biological activities of these metabolites are available to date. The objective of this communication is to evaluate, for the first time, the cytotoxicity, dioxin-like activity, and estrogenicity of the least-studied DDT metabolites.     

原子吸收光谱法测定土壤中铜,铅,锌,铬 锰

土壤中铜、铅、锌、铬、锰的含量是很低的,一般为痕量级.目前大多采用高灵敏度的火焰原子吸收法测定.由于土壤中含有大量的矿质元素Si、Al、Fe、Ca、Mg、K、Na、Ti等,经化学分解后,大多进入待测试样溶液,试液中这些复杂的基体常常对原子吸收测定产生严重的干扰或基体效应,影响分析结果的准确性.为了消除基体的干扰,采用APDC/MIBK体系萃取法可有效地分离基体,消除干扰,能获得可靠准确的测定结果.尽管上述方法是可行的,但手续繁、时间费,尤其是还要接触到有毒性的有机溶剂,因此分析工作者一般不乐意采用.本文采用与土壤样品基体相匹配的、待测元素含量相接近的标准土壤样品,校准计算实际土壤样品中待测金属元素的分析结果.试验结果表明,本法能获得准确可靠的分析结果.     

Stereochemistry of LinB-catalyzed biotransformation of δ-HBCD to 1R,2R,5S,6R,9R,10S-pentabromocyclododecanol

The haloalkane dehalogenase LinB from Sphingobium indicum B90A converts β-hexachlorocyclohexane (β-HCH), the most persistent HCH stereoisomer, to mono- and dihydroxylated metabolites. Recently, we reported that LinB also transforms α-, β- and γ-hexabromocyclododecanes (HBCDs), which are structurally related to HCHs. Here, we show that LinB catalyzes the hydroxylation of δ-HBCD to two pentabromocyclododecanols (PBCDOHs) and two tetrabromocyclododecadiols (TBCDDOHs). The stereochemistry of this enzymatic transformation was deduced from XRD crystal structure data of the substrate δ-HBCD and α₂-PBCDOH, one of the biotransformation products. Five stereocenters of δ-HBCD are unchanged but the one at C6 is converted to an alcohol with inversion from S- to R-configuration in a nucleophilic, S_N2-like substitution reaction. Only α₂-PBCDOH with the 1R,2R,5S,6R,9R,10S-configuration is obtained but not its enantiomer. With only two of the 64 PBCDOHs formed, these transformations indeed are regio- and stereoselective. A conformational analysis revealed that the triple-turn motive, which is predominant in δ-HBCD and in several other HBCD stereoisomers, is also found in the product. This shows that LinB preferentially converted reactive bromine atoms but not those in the conserved triple-turn motive. The widespread contamination with HCHs triggered the bacterial evolution of dehalogenases which acquired the ability to convert these pollutants and their metabolites. We here demonstrate that LinB of S. indicum also transforms HBCDs regio- and stereoselectively following a similar mechanism.     

理清思路,明确重点,加强环境保护宏观管理

自改革开放以来，浙江省的环境保护工作取得了很大的进展，工业污染得到一定程度的控制，城市环境综合整治效果显著，自然生态环境保护获得较快发展，环境科技和环保产业初具规模，国际合作初见成效，环境管理体系初步建成。但是，浙江省人多地少资源贫乏，环境污染形势仍不容乐观，生态破坏现状仍比较严重。学习贯彻十五大精神，把浙江省的环境保护工作推向21世纪，任重而道远。1理清思路适应新形势江泽民总书记在十五大报告中正确地分析了我国国情，强调在现代化建设中必须实施可持续发展战略，坚持环境保护的基本国策，正确处理经济发展…