Dissolution and solubility of trace metals from natural and anthropogenic aerosol particulate matter

An open flow reactor is used to simulate the dissolution process of mineral aerosol particles in atmospheric water droplets. Data on dissolution kinetic and solubility are provided for the major trace metals from two kinds of matrix: alumino-silicated and carbonaceous sample. The results emphasise that the metals contained in the carbonaceous aerosols are easier dissolved than in the alumino-silicated particles. The released concentrations are not related to the total metal composition or the origin of particles, but are directly associated with the type of liaisons whereby the metals are bound in the solid matrix. Thus, the metals coming from carbonaceous particles are adsorbed impurities or salts and hence are very soluble and with a dissolution hardly dependent on pH, whereas the metals dissolved from alumino-silicated particles are less soluble, notably the ones constitutive of the matrix network (Fe, Mn), and with a dissolution highly influenced by pH. Consequently, in the regions with an anthropogenic influence, the dissolved concentrations of metals found in the atmospheric waters are mainly governed by the elemental carbon content. Moreover, it appears that the dissolution kinetic of metals is not constant as a function of time. The dissolution rates are very rapid in the first 20 min of leaching and then they are stabilised to lower values in comparison to initial rates. By consequence, the total dissolved metal content is provided after the first 20 min of the droplet lifetime. For this reason, the effects of trace metals on the atmospheric aqueous chemistry and as atmospheric wet input to the marine biota are maximal for "aged" droplets.     

Mobility of metals and metalloids from SHOS coal ash and slag deposit: mineralogical and geochemical constraints

Environmental Science and Pollution Research - Deposits remained after coal combustion are a well-known occurrence in the world; unfortunately, only a small percentage of such deposits are...     

Climatic changes and their role in emergence and re-emergence of diseases

Environmental Science and Pollution Research - Global warming and the associated climate changes are predictable. They are enhanced by burning of fossil fuels and the emission of huge amounts of...     

Status and trends of circumpolar peregrine falcon and gyrfalcon populations

Ambio - The peregrine falcon (Falco peregrinus) and the gyrfalcon (Falco rusticolus) are top avian predators of Arctic ecosystems. Although existing monitoring efforts are well established for both...     

Combustion aerosols: factors governing their size and composition and implications to human health

Particulate matter (PM) emissions from stationary combustion sources burning coal, fuel oil, biomass, and waste, and PM from internal combustion (IC) engines burning gasoline and diesel, are a significant source of primary particles smaller than 2.5 microns (PM2.5) in urban areas. Combustion-generated particles are generally smaller than geologically produced dust and have unique chemical composition and morphology. The fundamental processes affecting formation of combustion PM and the emission characteristics of important applications are reviewed. Particles containing transition metals, ultrafine particles, and soot are emphasized because these types of particles have been studied extensively, and their emissions are controlled by the fuel composition and the oxidant-temperature-mixing history from the flame to the stack. There is a need for better integration of the combustion, air pollution control, atmospheric chemistry, and inhalation health research communities. Epidemiology has demonstrated that susceptible individuals are being harmed by ambient PM. Particle surface area, number of ultrafine particles, bioavailable transition metals, polycyclic aromatic hydrocarbons (PAH), and other particle-bound organic compounds are suspected to be more important than particle mass in determining the effects of air pollution. Time- and size-resolved PM measurements are needed for testing mechanistic toxicological hypotheses, for characterizing the relationship between combustion operating conditions and transient emissions, and for source apportionment studies to develop air quality plans. Citations are provided to more specialized reviews, and the concluding comments make suggestions for further research.     

Reactive nitrogen and human health: acute and long-term implications

Reactive-nitrogen (Nr) has a wide variety of beneficial and detrimental effects on human health. The most important of the beneficial effects are increasing global and regional food supplies and increased nutritional quality of available foods. However, lack of adequate dietary intake of amino acids and proteins is a serious cause of malnutrition when food supplies are inadequate because of poverty, drought, floods, wars, and displacements of people as refugees. There is sufficient, though limited, quantitative data indicating that increased circulation of Nr in the environment is responsible for significant human health effects via other exposure pathways. Nr can lead to harmful health effects from airborne occupational exposures and population-wide indoor and outdoor air pollution exposures to nitrogen dioxide and ozone. Nr can also affect health via water pollution problems, including methemoglobinemia from contaminated ground water, eutrophication causing fish kills and algal blooms that can be toxic to humans, and via global warming. The environmental pollutants stemming from reactive nitrogen are ubiquitous, making it difficult to identify the extent to which Nr exerts a specific health effect. As all populations are susceptible, continued interdisciplinary investigations are needed to determine the extent and nature of the beneficial and harmful effects on human health of nitrogen-related pollutants and their derivatives.     

Environment contamination by mycotoxins and their occurrence in food and feed: Physiological aspects and economical approach

The contamination of food and feed by mycotoxins as toxic metabolites of fungi is a risk not only for consumers resulting in various embarrassment regarding health status and well-being, but also for producers, companies and export market on the ground of economic losses and ruined stability of economic trade. As it is given in historical evidence, the contamination of food by mycotoxins is a topic as old as a history of mankind, finding some evidence even in the ancient books and records. Nowadays, the mycotoxins are used in modern biotechnological laboratories and are considered an agent for targeting the specific cells (e.g., defected cells to eliminate them). However, this promising procedure is only the beginning. More concern is focused on mycotoxins as abiotic hazard agents. The dealing with them, systematic monitoring, and development of techniques for their elimination from agricultural commodities are worldwide issues concerning all countries. They can be found alone or in co-occurrence with other mycotoxins. Thus, this review aims to provide widened information regarding mycotoxins contamination in environment with the consequences on health of animals and humans. The inevitability for more data that correctly determine the risk points linked to mycotoxins occurrence and their specific reactions in the environment is demonstrated. This review includes various symptoms in animals and humans that result from mycotoxin exposure. For better understanding of mycotoxin's impact on animals, the sensitivities of various animal species to various mycotoxins are listed. Strategies for elimination and preventing the risks of mycotoxins contamination as well as economical approach are discussed. To complete the topic, some data from past as historical evidences are presented.     

Enhanced experimental flexibility and control in ecotoxicological mesocosm experiments--a new outdoor and indoor pond and stream system

Scope The German Federal Environmental Agency has put into operation a new modular mesocosm system consisting of eight outdoor and eight indoor ponds and streams in order to investigate fate and effects of chemicals and municipal wastewater in aquatic ecosystems. General design and special characteristics are given to demonstrate the wide range of possibilities for experimental research. - General design. Each of the 16 streams with riffle and pool sections can be varied in length up to 106 m. The streams can be run as circular or flow-through systems at a flow velocity of 0.02 to 0.6 m/s. Physico-chemical standard parameters are measured on-line. The 16 ponds, which can be connected to the stream systems, are equipped with drainage and pore water-sampling devices for simulating processes in the littoral zone including influent and effluent ground water flow. Perspectives Since the highly flexible and controllable construction also allows treating a wide range of hydrological and ecological experiments external institutions are invited to submit proposals.     

污泥膨胀形成机理及控制措施研究现状和进展

污泥膨胀现象在全球污水处理厂普遍存在,已成为制约活性污泥工艺发展的重大难题之一.本文总结了丝状细菌研究现状;重点阐述了当前引起污泥膨胀的主要机理;说明了基于这些机理的选择器控制理论;给出了主要的选择器类型.对当前关于污泥膨胀的研究进展和方向,分别从微生物和数学模型2个方面进行了讨论,最后,提出了一系列亟待解决的问题.     

Combustion Aerosols: Factors Governing Their Size and Composition and Implications to Human Health

ABSTRACT

Particulate matter (PM) emissions from stationary combustion sources burning coal, fuel oil, biomass, and waste, and PM from internal combustion (IC) engines burning gasoline and diesel, are a significant source of primary particles smaller than 2.5 μm (PM_2.5) in urban areas. Combustion-generated particles are generally smaller than geologically produced dust and have unique chemical composition and morphology. The fundamental processes affecting formation of combustion PM and the emission characteristics of important applications are reviewed. Particles containing transition metals, ultrafine particles, and soot are emphasized because these types of particles have been studied extensively, and their emissions are controlled by the fuel composition and the oxidant-tem-perature-mixing history from the flame to the stack. There is a need for better integration of the combustion, air pollution control, atmospheric chemistry, and inhalation health research communities. Epidemiology has demonstrated that susceptible individuals are being harmed by ambient PM. Particle surface area, number of ultrafine particles, bioavailable transition metals, polycyclic aromatic hydrocarbons (PAH), and other particle-bound organic compounds are suspected to be more important than particle mass in determining the effects of air pollution. Time- and size-resolved PM measurements are needed for testing mechanistic toxicological hypotheses, for characterizing the relationship between combustion operating conditions and transient emissions, and for source apportionment studies to develop air quality plans. Citations are provided to more specialized reviews, and the concluding comments make suggestions for further research.     

Agricultural work related injury and Ill-health and the economic cost

This paper contains a literature review of the occupational injuries and ill-health in agriculture world-wide and a survey of the attempts that have been made to estimate the resulting economic and social costs. Agricultural workers suffer a wide variety of disorders as a result of their occupation. These range from minor (cuts, bruises) to more severe (deep wounds, fractures), permanent (amputation, spinal cord injury) and fatal injury. Ill-health as a result of contact with animals, micro-organisms, plant material dusts or chemicals are associated with certain types of agriculture. There is an underlying but unquantified incidence of pain, stress and injury as a result of ergonomic problems due to poor working procedures and conditions. Statistics from many countries or regions show that agriculture consistently has one of the highest accident and injury rates of the industrial sectors. There are many causes for the work related injury and ill-health in agricultural workers. In developed countries, tractors and other machinery cause a significant proportion of the accidents and are a major cause of occupational deaths. In less developed countries, accidents due to hand tools such as hoes, sickles and cutting instruments are most prevalent. Animals are a significant cause of injury and ill-health in many countries. Debilitating allergic reactions in the respiratory tract or the skin are caused by exposures to organic dusts, or by contact with allergenic plants in the field respectively. Where comparative data are available, occupational pesticide poisoning in agriculture is a small proportion (< 1–4%) of the total work related disorders. Because of the wide variety of occupational risks to agricultural workers, it is emphasised that if one type of agricultural practice is replaced by another then the risks from the alternative procedure need to be considered. If, for example, agrochemical pest control practices are replaced by methods involving the increased use of machinery, draught animals or manual operations, then an assessment of the resulting risks should be taken into account. Some of the economic costs of occupational injury and ill-health in agriculture can be quantified directly, such as medical costs, the cost of rehabilitation and loss of earnings. Other costs are more difficult to estimate such as loss of opportunity and income foregone for permanent and fatal injury and for the effect on a victim’s family. The estimation of the overall economic costs to farming communities and national agriculture requires further development. When one agricultural practice is replaced wholly or partly by another, for example agrochemical pest control by alternative control methods, then it is necessary to take into account the occupational health costs of the alternative procedure for realistic comparative assessment. There are a number of issues which require continued or increased attention by the relevant national and international authorities and by the agricultural industry. These include the improved collection and collation of occupational health statistics, a better understanding of the extent of ergonomic problems in agriculture, more realistic assessments of the cost of occupational injury and ill-health and the continued need to reduce occupational health disorders by appropriate training and education in agricultural practices and the use of agricultural equipment.     

湿式氧化技术及其应用比较

对湿式氧化技术及其影响因素进行了介绍 ,叙述了各种因素的影响作用并对各因素的影响强弱进行了比较 ,认为反应温度和处理对象的性质是影响湿式氧化技术处理效果的关键因素。阐述了湿式氧化技术在废水处理、污泥处理、活性炭再生中的一些应用研究情况 ,并进行了比较。总结了湿式氧化技术的特点及其在环境治理中的优势     

Identification and quantitation of semi-crystalline microplastics using image analysis and differential scanning calorimetry

Environmental Science and Pollution Research - There are several techniques used to analyze microplastics. These are often based on a combination of visual and spectroscopic techniques. Here we...     

汽车排气催化净化用金属载体的生产工艺与设备

针对目前我国汽车排气净化催化剂用金属载体的生产现状和发展趋势进行了研究 ,简述了国内外汽车排气净化用金属载体的生产概况 ,对金属载体的工艺性能要求与陶瓷载体进行了比较 ;对金属载体的生产工艺与设备参数以及金属蜂窝载体的产品技术条件进行了分析和介绍。     

Turbulence and dispersion modeling near highways

Traffic-induced turbulence plays a dominant role in the dispersion of pollutants near highways. The formulations for velocity deficit and turbulence in vehicle wakes, developed from theoretical and physical modeling studies of Eskridge and his colleagues at US EPA about 20 years ago, are discussed. The vehicle wake parameterizations incorporated in ROADWAY-2, a near-highway pollutant dispersion model, and its evaluation results are described. The first field measurements of velocities and turbulence in the vehicle wake, using a towed array of 3-D sonic anemometers, are analyzed, and the results are presented and discussed. Specific recommendations are made for additional work in field measurements, laboratory studies, and mathematical model development and evaluation.     

Global Urban Growth and the Geography of Water Availability,Quality, and Delivery

Globally, urban growth will add 1.5 billion people to cities by 2030, making the difficult task of urban water provisions even more challenging. In this article, we develop a conceptual framework of urban water provision as composed of three axes: water availability, water quality, and water delivery. For each axis, we calculate quantitative proxy measures for all cities with more than 50,000 residents, and then briefly discuss the strategies cities are using in response if they are deficient on one of the axes. We show that 523 million people are in cities where water availability may be an issue, 890 million people are in cities where water quality may be an issue, and 1.3 billion people are in cities where water delivery may be an issue. Tapping into groundwater is a widespread response, regardless of the management challenge, with many cities unsustainably using this resource. The strategies used by cities deficient on the water delivery axis are different than for cities deficient on the water quantity or water quality axis, as lack of financial resources pushes cities toward a different and potentially less effective set of strategies.     

小型高效回转窑式焚烧炉的探索与实践

针对化工行业中多种类工业废弃物的特点 ,确定采用回转窑式焚烧炉的可行性 ,给出了焚烧系统的设计思路以及重要设备的计算方法 ,并在实际中加以验证     

Accumulation and partition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) in the muscle and liver of fish

The present study monitored fish from sites contaminated for many years, and the data reflected the results of actual, long-term environmental exposure. The sum concentrations and TEQs of PCDD/F in the muscle of common carp (Cyprinus carpio (linnaeus)) and big head (Aristichthys nobilis) from the different site of a heavily polluted lake in China are decreased with decrease of PCDD/F concentration in sediment and water. Concentration in fish can be highly variable, but the concentration is comparable in muscle between different species of fish if the concentrations are normalized by lipid content. PCDD/F accumulate in certain tissues with the highest proportions found in the liver of fish. The concentrations and TEQs in livers were also decreased with concentrations of sediments and water. The concentrations of PCDD/F in muscle are significantly correlated with those in liver. BCFs of 2,3,7,8-substituted PCDD/F calculated directly from water were consistent with that calculated indirectly from sediment. PCDD/F concentrations in sediment are much higher than that in water, therefore the measurement is much easier and the results are more accurate. Estimated BCFs for superhydrophobic chemicals derived from sediment may also serve as acceptable surrogates for "true" bioaccumulation potential.     

Recovery,Recycle and Reuse

An overview is provided of hazardous waste recovery, recycle and reuse. The quantities and types of hazardous waste that are generated in the United States are identified. Hazardous wastes are classified according to their economic potential for recovery. Energy and material recovery from organic liquids and metal recovery from sludges have the highest potential for economical recovery. Specific examples are provided of recovery from these types of wastes. A variety of financial and regulatory strategies can be used to encourage recovery from waste streams that do not have a potential for economical recovery. These range from restrictions on burial to the establishment of waste exchanges.     

Chlorophenols and other related derivatives of environmental concern: properties, distribution and microbial degradation processes

Chlorophenols are chlorinated aromatic compound structures and are commonly found in pesticide preparations as well as industrial wastes. They are recalcitrant to biodegradation and consequently persistent in the environment. A variety of chlorophenols derivatives compounds are highly toxic, mutagenic and carcinogenic for living organisms. Biological transformation by microorganisms is one of the key remediation options that can be exploited to solve environmental pollution problems caused by these notorious compounds. The key enzymes in the microbial degradation of chlorophenols are the oxygenases and dioxygenases. These enzymes can be engineered for enhanced degradation of highly chlorinated aromatic compounds through directed evolution methods. This review underscores the mechanisms of chlorophenols biodegradation with the view to understanding how bioremediation processes can be optimized for cleaning up chloroaromatic contaminated environments.