Feasibility of iron scraps for enhancing nitrification of domestic wastewater at low temperatures

Environmental Science and Pollution Research - The development of an effective approach to improve low-temperature nitrification of domestic wastewater remains an important issue that needs to be...     

Photodegradation of an azo dye of the textile industry

An advanced oxidation treatment, UV/H2O2, was applied to an azo dye, Hispamin Black CA, widely used in the Peruvian textile industry. Rates of color removal and degradation of the dye have been evaluated. A strongly absorbing solution was completely decolorized after 35 min of treatment, and after 60 min an 82% reduction of the total organic carbon (TOC) was obtained. It has been found that the degradation rate increased until an optimum value, beyond which the reagent exerted an inhibitory effect. The degradation rate was also function of pH.     

A Comparison of Various Sources of Automotive Emissions

Chlorinated phenolic hydrocarbons are used as intermediate chemicals in the manufacture of 2,4-D (2,4-Dichlorophenoxy-acetic Acid) and related herbicides. These chemicals have an unusual odor with an extremely low threshold level of detection and consequently the manufacture and handling of these compounds poses a difficult odor control problem. Chipman Chemical Company at its Portland, Oregon plant has developed a system of fume collection and caustic soda solution scrubbing capable of removing phenolic compounds in the plant exhaust air to an acceptable level from an odor release standpoint. This article describes the development, present status, and projected future improvements of this odor control system.     

Application of photocatalysis as a post treatment method of a heterotrophic-autotrophic denitrification reactor effluent

The aim of this study is the application of photocatalysis as an effective post treatment scheme for the removal of the organic matter and bacteria released by an innovative biological denitrification process referred to as heterotrophic-autotrophic denitrification, which combines heterotrophic and autotrophic denitrification processes. Photocatalytic treatment was applied using TiO2 as a photocatalyst in the loading range of 0.25-2.00 g l(-1) for irradiation periods up to 60 min using a black light fluorescent lamp with an intensity of I(0)=1309 microW cm(-2). The photocatalytic inactivation data were modelled to pseudo first order kinetics as well as by the areal rates to evaluate the photocatalyst loading effect. Chlorination was used as a final disinfection step to attain an overall inactivation of total coliforms as well as to the formation of very low level of trihalomethanes.     

The prediction of the numbers of violations of standards and the frequency of air pollution episodes using extreme value theory

Extreme value theory is discussed in a manner suitable for scientists working in the air pollution area. The method of application of the theory is described by means of an example analysis on an ozone data set and the theory is applied to several data sets collected in Brisbane, Queensland, Australia. The theory is used to predict the number of violations of WHO and U.S. standards expected in the year following data collection. Comparison of these predictions with the relevant observations shows that the theory does quite well. Ways of using extreme value theory as an air quality management tool are suggested.     

Waterborne agrichemicals compromise the anti-predatory behavior of zebrafish

Environmental Science and Pollution Research - Due to human activities, there is an increasing presence of agrochemicals residues in water bodies, which could be attributed to an increased use of...     

Comparative study of microbial dechlorination of chlorinated ethenes in an aquifer and a clayey aquitard

In order to determine whether natural attenuation of chlorinated ethenes by microbial activity occurs in aquitards, sediments at a site contaminated with tetrachloroethene were vertically studied by drilling. The distribution of microbes (Dehalococcoides group and anaerobic hydrogen producers) and the ability of the sediments to sustain microbial dechlorination were determined in an aquitard as well as in an aquifer. Close-spaced sampling revealed the existence of large populations of Dehalococcoides and H(2)-producing bacteria, especially in the organic-rich clayey aquitard rather than in the aquifer. The vinyl chloride reductase gene was also detected in the clay layer. Furthermore, incubation experiments indicated that the clay sediment could sustain transformations of tetrachloroethene at least to vinyl chloride. In contrast, no significant transformation was observed in the aquifer sand. Our results indicate that dechlorination of tetrachloroethene by bacteria can take place in an organic-rich clayey aquitard, and that organic-rich clay may also be important in the natural attenuation in an adjacent aquifer, possibly supplying a carbon source or an electron donor.     

The Application of the Karl Fischer Oven for the Determination of Water in Consumer Products

Abstract

The direct Karl Fischer (KF) titration method has known interferences for measuring water content. In addition, in analyzing some paints, KF can fail to produce an accurate analysis. The California Air Resources Board (GARB) staff has developed a KF procedure that can be used to determine the water content of consumer products. The procedure uses an oven accessory to the titration system, and is based on a distillation method developed by the California Polytechnical University at San Luis Obispo (Cal Poly). Samples are diluted in l-methoxy-2-propanol (MPA), and an aliquot is injected into an enclosed oven system, where the MPA/water azeotrope is swept directly into the KF titration vessel. The technique is accurate and precise and, thus far, proves to be a fast and reliable method for analysis.     

Characterization of emissions during the heating of tyre contaminated scrap

In order to characterize the compounds (type and quantities) emitted during melting of organic contaminated scrap and to investigate the mechanism of their formation, an experimental set-up has been designed and built to study precisely the influence of temperature and gas atmosphere in the conditions of an electric arc furnace. These experiments lead to the determination of mass balances (C, H, O, S) and to the quantification of unburnt compounds (tars, carbon monoxide, volatile organic compounds (VOCs), benzene, toluene, ethylbenzene and xylenes (BTEX), polyaromatic compounds (PAHs)). Degradation conditions (gas atmosphere and temperature) corresponding to different areas in the electric furnace have also been investigated. Such experiments lead to a better understanding of degradation mechanisms; this interpretation is not possible from investigations performed in an industrial furnace since there are many uncontrolled parameters (large dispersion of the results).     

Engineering risk assessment for emergency disposal projects of sudden water pollution incidents

Without an engineering risk assessment for emergency disposal in response to sudden water pollution incidents, responders are prone to be challenged during emergency decision making. To address this gap, the concept and framework of emergency disposal engineering risks are reported in this paper. The proposed risk index system covers three stages consistent with the progress of an emergency disposal project. Fuzzy fault tree analysis (FFTA), a logical and diagrammatic method, was developed to evaluate the potential failure during the process of emergency disposal. The probability of basic events and their combination, which caused the failure of an emergency disposal project, were calculated based on the case of an emergency disposal project of an aniline pollution incident in the Zhuozhang River, Changzhi, China, in 2014. The critical events that can cause the occurrence of a top event (TE) were identified according to their contribution. Finally, advices on how to take measures using limited resources to prevent the failure of a TE are given according to the quantified results of risk magnitude. The proposed approach could be a potential useful safeguard for the implementation of an emergency disposal project during the process of emergency response.

     

A model of oscillatory transport in granular soils, with application to barometric pumping and earth tides

A simple algebraic model is proposed to estimate the transport of a volatile or soluble chemical caused by oscillatory flow of fluid in a porous medium. The model is applied to the barometric pumping of vapors in the vadose zone, and to the transport of dissolved species by earth tides in an aquifer. In the model, the fluid moves sinusoidally with time in the porosity of the soil. The chemical concentration in the mobile fluid is considered to equilibrate with the concentration in the surrounding matrix according to a characteristic time governed by diffusion, sorption, or other rate processes. The model provides a closed form solution, to which barometric pressure data are applied in an example of pore gas motion in the vadose zone. The model predicts that the additional diffusivity due barometric pumping in an unfractured vadose zone would be comparable to the diffusivity in stagnant pore gas if the equilibration time is 1 day or longer. Water motion due to the M2 lunar tide is examined as an example of oscillatory transport in an aquifer. It is shown that the tidal motion of the water in an aquifer might significantly increase the vertical diffusivity of dissolved species when compared to diffusion in an absolutely stagnant aquifer, but the hydrodynamic dispersivity due to tidal motion or gravitational flow would probably exceed the diffusivity due to oscillatory advection.     

Assessment of instream foam formation and quantification of foam in effluents

Although the foam formation on surface waters nowadays is not comparable with the foam “mountains” in the 1970s, it still is an issue of water quality concern. A drawback in the discussion is the lack of methods to assess instream foam formation and foam emitted by point sources. Foam formation on a transboundary river in Austria led to an intensive study resulting in two parameters to quantify instream and emitted foam. Foam potential is introduced as emission parameter that is defined as flow rate of river water, which can foam due to an effluent’s discharge. The foam index (FI) represents a parameter to assess the foam on the river and allows a semi-quantitative differentiation between the varying foaming conditions. This publication will present the developed methods and show some results to prove their accuracy and applicability.     

An integrated test strategy for the assessment of anaerobic biodegradability of wastewaters

The anaerobic biodegradability of wastewaters from different chemical plants was determined by an integrated test strategy consisting of an anaerobic toxicity test, a static anaerobic biodegradation test and a continuously operated fixed bed reactor test. This integrated procedure offered a useful tool for screening wastewaters for anaerobic biodegradability. Four different wastewaters were tested for anaerobic toxicity and biodegradability. One wastewater was used in subsequent testing in a fixed bed reactor which aimed to illustrate a potential design of an anaerobic treatment plant.     

An evaluation of surfactant foam technology in remediation of contaminated soil

Soil contamination is notoriously difficult to treat because the contaminants are often tightly bound to the soil particles. Conventional remediation technologies are becoming less popular due to the high treatment costs. This paper gives a comprehensive overview and evaluation of an emerging promising alternative, surfactant foam technology. Different from other approaches, surfactant foam technology may be designed either to remove contaminants or/and simultaneously act as an augmentation for the existing technologies such as pump-and-treat systems and bioremediation processes to improve the contaminant removal efficiency and cost effectiveness. Encouraging results were achieved from laboratory and field demonstrations. However, as an innovative technology, there are many factors to be investigated with the future development. Special attention is paid to the selection of the most appropriate foaming surfactant and surfactant concentration, which are critical to the success of the implementation of the remediation process and have significant effects on the treatment costs. Moreover, development of predictive mathematical models in for future research is helpful to optimize the remediation process.     

In situ functionalization of a cellulosic-based activated carbon with magnetic iron oxides for the removal of carbamazepine from wastewater

Environmental Science and Pollution Research - The main goal of this work was to produce an easily recoverable waste-based magnetic activated carbon (MAC) for an efficient removal of the...     

Cardiovascular effects of arsenic: clinical and epidemiological findings

Several population studies relate exposure to high levels of arsenic with an increased incidence of ischemic heart disease and cardiovascular mortality. An association has been shown between exposure to high levels of arsenic and cardiovascular risk factors such as hypertension and diabetes mellitus, and vascular damage such as subclinical carotid atherosclerosis. The mechanisms underlying these phenomena are currently being studied and appear to indicate an alteration of vascular function. However, the effects of low levels of exposure to arsenic and their potential detrimental cardiovascular effect are less explored. The article provides an overview of the pathophysiologic mechanisms linking low-level arsenic exposure to the occurrence of cardiovascular disease and its complications, and some potential preventive strategies to implement.     

The Formulation of Emission Control Strategies Using a Cubic Polynomial Approximation

Assuming the existence of an ambient air standard for a given pollutant, there is some agreement that emission standards for local area and point sources should be established by formulating and testing various “control strategies” with use of a computer diffusion model. The procedure requires several, perhaps many, computer simulations of pollutant dispersion followed by an analysis of the results of each simulation. Part of this analysis is to include an “optimization” of sorts which is intended to provide a workable control strategy which, in turn, is to indicate required emission level reductions for point sources. This paper is intended to describe and apply an approximation technique which, when used in conjunction with a diffusion model, could be of value in determining acceptable emission levels for point sources.     

Light scattering characteristics of aerosols as a function of relative humidity: Part I--A comparison of measured scattering and aerosol concentrations using the theoretical models

The Southeastern Aerosol and Visibility Study (SEAVS) was undertaken to characterize the size-dependent composition, thermodynamic properties, and optical characteristics of the ambient atmospheric particles in the southeastern United States. The field portion of the study was carried out from July 15 to August 25, 1995. As part of the study a relative humidity controlled inlet was built to raise or lower the relative humidity to predetermined levels before the aerosol was passed into an integrating nephelometer or particle-sizing device. Five other integrating nephelometers were operated in various configurations, two of which were fitted with a 2.5 microns inlet. Fine particle (< 2.5 microns) samplers were operated to measure concentrations of sulfate, nitrate, and ammonium ions, organic and elemental carbon, and fine soil. Mass size distributions were measured with an eight-stage, single orifice cascade impactor. Four different strategies for estimating scattering were used. First, an externally mixed model with constant specific scattering coefficients, sulfate ion mass interpreted as ammonium bisulfate, and ammonium bisulfate growth as a function of relative humidity, is assumed. Second, an externally mixed aerosol model, assuming constant dry specific scattering but with sulfate ammoniation and associated composition-dependent hygroscopicity explicitly accounted for, is used. Third, an externally mixed aerosol model, but with sulfate ammoniation, associated growth as a function of relative humidity, and sulfate size distributions, is applied. Fourth, an internally mixed aerosol model with measured sulfur size distributions and estimated size distributions for other species is used with the growth characteristics of the mixture being estimated using the Zdanovskii-Stokes-Robinson (ZSR) assumptions. Only ionic species were considered to be hygroscopic. The second, third, and fourth approaches yield similar results with reconstructed scattering comparing quite favorably with measured scattering. Accounting for sulfate ammoniation and associated water uptake was the most important detail in achieving closure between measurements and modeled scattering. In general, differences between estimated scattering, assuming internally or externally mixed models, was small. These same models were used to estimate wet to dry scattering ratios. The R2 for an ordinary least-squares regression between measured and predicted ratios was high (0.71-0.92), and in most cases the scattering ratio was insensitive to modeling assumptions. However, during some sample periods differences between predicted scattering ratios for the different modeling assumptions were as high as 30%.     

Effects of teflubenzuron on sediment processing by members of the Capitella species-complex

The cosmopolitan deposit-feeding polychaete Capitella is widely used as an indicator of organic pollution and plays an important role in waste recycling at aquaculture sites. Teflubenzuron is currently employed by salmon farms as an in-feed compound to control ectoparasite infestations. Its occurrence in sediments could pose a hazard to local sediment infauna. A bioassay to investigate the effects of exposing Capitella sp I and Capitella sp B to sediment spiked with environmentally relevant concentrations of teflubenzuron (8.4, 25 and 41.8 microg/g dry wt. sediment) is described. No mortality was recorded for Capitella sp I, but increasing teflubenzuron concentrations significantly reduced egestion rates. Capitella sp B exhibited mortality, although egestion was not affected. These results using Capitella spp. indicated that teflubenzuron could affect the rate of sediment processing by polychaetes close to fish farms treated with this compound. Further studies are recommended to assess the potential of contaminants in aquaculture wastes.     

An in situ study of the effect of nitrate on the reduction of trichloroethylene by granular iron

The effect of nitrate on the reduction of TCE by commercial granular iron was investigated in column experiments designed to allow for the in situ monitoring of the iron surface film with Raman spectroscopy. Three column experiments were conducted; one with an influent solution of 100 mg/l nitrate+1.5 mg/l TCE, and two control columns, one saturated directly with 100 mg/l nitrate solution, the other pre-treated with Millipore water prior to the introduction of a 100 mg/l nitrate solution. In the presence of nitrate, TCE adsorbed onto the iron, but there was little TCE reduction to end-products ethene and ethane. The iron used (Connelly, GPM, Chicago) is a product typical of those used in permeable granular iron walls. The material is covered by an air-formed high-temperature oxidation film, consisting of an inner layer of Fe(3)O(4), and an outer, passive layer of Fe(2)O(3). In the control column pre-treated with Millipore water, the passive Fe(2)O(3) layer was removed upon contact with the water in a manner consistent with an autoreduction reaction. In the TCE+nitrate column and the direct nitrate saturation column, nitrate interfered with the removal of the passive layer and maintained conditions such that high valency protective corrosion species, including Fe(2)O(3) and FeOOH, were stable at the iron surface. The lack of TCE reduction is explained by the presence of these species, as they inhibit both mechanisms proposed for TCE reduction by iron, including catalytic hydrogenation, and direct electron transfer.