1-Butanol removal from a contaminated airstream under continuous and diurnal loading conditions

A polysulfone microporous membrane module was investigated for control of 1-butanol-contaminated gas streams. A diurnal loading condition, using two different butanol concentrations, was used to simulate start-up and stop conditions associated with shift work. The membrane module was also used to remove 1-butanol from air under continuous loading conditions in a bioreactor. The reactors were seeded with a mixed bacterial consortium capable of butanol biodegradation. Biokinetic parameters for butanol utilization were determined for the culture to be a maximum specific utilization rate (k) equal to 4.3 d(-1) and a half saturation constant (Ks) equal to 8.9 mg L(-1). A biofilter running only with diurnal loading conditions giving a "40-hr work-week" had an average 1-butanol removal rate of 29% (111 ppm, 74 gm(-3) hr(-1)) from a 350-ppm influent at the end of an 8-hr operational day. End-of-day removal varied between 4 and 67% during the operational period. With continuous steady-state operation followed by placement on a diurnal loading schedule and influent butanol concentrations increased to 700 ppm, butanol removal averaged 38% (269 ppm, 145 gm-3 hr(-1)). Under continuous loading, steady-state conditions, 1-butanol removal from the airstream was greater than 99% (200 ppm, 73 gm-3 hr(-1)). These results suggest that the bioreactor can be operated on a diurnal schedule or 40-hr week operational schedule without any decline in performance.     

Biodegradation of crystal violet by a Shewanella sp. NTOU1

A bacterial isolate, strain NTOU1, originally isolated from the cooling system in an oil refinery could decolorize and detoxify crystal violet under anaerobic conditions. The strain was characterized and identified as a member of Shewanella decolorationis based on Gram staining, morphology characters, biochemical tests, the 16S rRNA gene and the gyrase subunit beta gene (gyrB). The optimum pH value and temperature for decolorization of crystal violet by this strain under anaerobic conditions were pH 8-9 and 30-40 degrees C, respectively. Formate (20 mM) was the best electron donor. Addition of ferric citrate did not inhibit decolorization of crystal violet, the addition of thiosulfate, ferric oxide, or manganese oxide slightly decreased decolorization, while addition of nitrite (20 mM) inhibited the decolorization of crystal violet. By supplementing the medium with formate and ferric citrate and cultivating it under optimum pH and temperature, this strain could remove crystal violet, at a concentration of 1500 mg l(-1), at the rate of 298 mg l(-1) h(-1) (during decolorization the OD(600) of the cell culture increased from approximately 0.6 to approximately 1.2). GC/MS analysis of the degradation products of crystal violet detected the presence of N,N'-bis(dimethylamino) benzophenone (Michler's Ketone), [N,N-dimethylaminophenyl] [N-methylaminophenyl] benzophenone, N,N-dimethylaminobenzaldehyde, N,N-dimethylaminophenol, and 4-methylaminophenol. These results suggest that crystal violet was biotransformed into N,N-dimethylaminophenol and Michler's Ketone prior to further degradation of these intermediates. This paper proposes a probable pathway for the degradation of crystal violet by this Shewanella sp. Cytotoxicity and antimicrobial tests showed that the process of decolorization also detoxify crystal violet.     

Efficacy and safety of doravirine in treatment-naive HIV-1-infected adults: a systematic review and meta-analysis

Environmental Science and Pollution Research - This research aims to study the safety and efficacy of doravirine in the treatment of HIV-1 (human immunodeficiency virus) patients. We conducted an...     

Migration and natural fate of a coal tar creosote plume: 1. Overview and plume development

A volume of sand containing coal tar creosote was emplaced below the water table at CFB Borden to investigate natural attenuation processes for complex biodegradable mixtures. Coal tar creosote is a mixture of more than 200 polycyclic aromatic hydrocarbons, heterocyclic compounds and phenolic compounds. A representative group of seven compounds was selected for detailed study: phenol, m-xylene, naphthalene, phenanthrene, 1-methylnaphthalene, dibenzofuran and carbazole. Movement of groundwater through the source led to the development of a dissolved organic plume, which was studied over a 4-year period. Qualitative plume observations and mass balance calculations indicated two key conclusions: (1) compounds from the same source can display distinctly different patterns of plume development and (2) mass transformation was a major influence on plume behaviour for all observed compounds.     

Transport of coliphage PRD1 in a surface flow constructed wetland.

A tracer study was conducted in a 3-ha surface flow constructed wetland to analyze transport performance of PRD1, an enteric virus model. The convection-dispersion equation (CDE), including a first-order reaction model, adequately simulated transport performance of PRD1 in the wetland under an average hydraulic loading rate of 82 mm/d. Convective velocity (v) and longitudinal dispersion coefficient (D) were estimated by modeling a conservative tracer (bromide) pulse through the wetland. Both PRD1 and bromide were simultaneously added to the entering secondary treated wastewater effluent. The mass of bromide and PRD1 recovered was 76 and 16%, respectively. The PRD1 decay rate was calculated to be 0.3/day. The findings of this study suggest that the CDE model and analytical moment equations represent a suitable option to characterize virus transport performance in surface flow constructed wetlands.     

Mineralization of p-nitrophenol by a new isolate Arthrobacter sp. Y1

Arthrobacter sp. Y1, capable of metabolizing p-nitrophenol (PNP) as the sole carbon, nitrogen and energy source was isolated from activated sludge. The bacterium could tolerate concentrations of PNP up to 600 mg L(- 1), and degradation of PNP was achieved within 120 h of incubation. PNP and its metabolites were analyzed by high performance liquid chromatography (HPLC). The metabolite formed indicated that the organism followed the 4-nitrocathechol (4-NC) pathway for metabolism of this compound. The relevant degrading-enzyme was extracellular. Addition of other carbon source (glucose 0 approximately 30 g L(- 1)) led to accelerated degradation. If the glucose concentration exceeded 30 g L(- 1), however, degradation was repressed. Spectrophotometry assay of the nitrite and genotoxic study showed that strain Y1 could detoxify PNP. Therefore, the present study may provide a basis for the development of the bioremediation strategies to remedy the pollutants in the environment.     

1-Butanol Removal from a Contaminated Airstream under Continuous and Diurnal Loading Conditions

Abstract

A polysulfone microporous membrane module was investigated for control of 1-butanol-contaminated gas streams. A diurnal loading condition, using two different butanol concentrations, was used to simulate startup and stop conditions associated with shift work. The membrane module was also used to remove 1-butanol from air under continuous loading conditions in a bioreactor. The reactors were seeded with a mixed bacterial consortium capable of butanol biodegradation. Biokinetic parameters for butanol utilization were determined for the culture to be a maximum specific utilization rate (k) equal to 4.3 d^?1 and a half saturation constant (K_s) equal to 8.9 mg L^?1. A biofilter running only with diurnal loading conditions giving a “40-hr workweek” had an average 1-butanol removal rate of 29% (111 ppm, 74 gm^?3 hr^?1) from a 350-ppm influent at the end of an 8-hr operational day. End-of-day removal varied between 4 and 67% during the operational period. With continuous steady-state operation followed by placement on a diurnal loading schedule and influent butanol concentrations increased to 700 ppm, butanol removal averaged 38% (269 ppm, 145 gm^?3 hr^?1). Under continuous loading, steady-state conditions, 1-butanol removal from the airstream was greater than 99% (200 ppm, 73 gm^?3 hr^?1). These results suggest that the bioreactor can be operated on a diurnal schedule or 40-hr week operational schedule without any decline in performance.     

Developing a high-resolution vehicular emission inventory by integrating an emission model and a traffic model: Part 1--Modeling fuel consumption and emissions based on speed and vehicle-specific power

To improve the accuracy and applicability of vehicular emission models, this study proposes a speed and vehicle-specific power (VSP) modeling method to estimate vehicular emissions and fuel consumption using data gathered by a portable emissions monitoring system (PEMS). The PEMS data were categorized into discrete speed-VSP bins on the basis of the characteristics of vehicle driving conditions and emissions in Chinese cities. Speed-VSP modal average rates of emissions (or fuel consumption) and the time spent in the corresponding speed-VSP bins were then used to calculate the total trip emissions (or fuel consumption) and emission factors (or fuel economy) under specific average link speeds. The model approach was validated by comparing it against measured data with prediction errors within 20% for trip emissions and link-speed-based emission factors. This analysis is based on the data of light-duty gasoline vehicles in China; however, this research approach could be generalized to other vehicle fleets in other countries. This modeling method could also be coupled with traffic demand models to establish high-resolution emissions inventories and evaluate the impacts of traffic-related emission control measures.     

A vehicle emissions system using a car simulator and a geographical information system: Part 1--System description and testing

A methodology for estimating vehicular emissions comprising a car simulator, a basic traffic model, and a geographical information system is capable of estimating vehicle emissions with high time and space resolution. Because of the extent of the work conducted, this article comprises two sections: In Part 1 of this work, we describe the system and its components and use examples for testing it. In Part 2 we will study in more detail the emissions of the sample fleet using the system and will make comparisons with another emission model. The experimental data for the car simulator is obtained using on-board measuring equipment and laboratory Fourier transform IR (FTIR) measurements with a dynamometer following typical driving cycles. The car simulator uses this data to generate emission factors every second. These emission factors, together with information on car activity and velocity profiles of highways and residential and arterial roads in Mexico City in conjunction with a basic traffic model, provide emissions per second of a sample fleet. A geographical information system is used to localize these road emissions.     

Bioaccumulation and elimination of avermectin B1a in the earthworms (Eisenia fetida)

The acute toxicity, bioaccumulation, and elimination of avermectin B1a (AVM B1a) in earthworm (Eisenia fetida) were investigated in different exposure systems. The LC50 of AVM B1a on earthworms were 24.1 mg/kg and 17.1 mg/kg, respectively, for 7 and 14 days in artificial soil. The LC50 tested by the filter paper for 2 days was 4.63 microg/cm2. The earthworms were cultivated in artificial soil containing 0.6 mg/kg and 3.0 mg/kg AVM B1a, respectively for bioaccumulation experiments. The AVM B1a residues in earthworms were determined with HPLC-fluorescence method. The results showed that AVM B1a was taken up from the concentrated artificial soil by the earthworms and the steady-state levels were reached after 9-18 days of exposure. On the 18th day, the final concentrations of AVM B1a in the earthworms treated with two different dosages were 107 ng/g and 165 ng/g, respectively; there were not significantly accumulation. About 80.0% and 94.8% of the accumulated AVM B1a were eliminated respectively in two groups within 1 day after they were exposed to AVM B1a-free soil, but a trace amount of AVM B1a was found for a relative long time in earthworms.     

Mineralization of p-nitrophenol by a new isolate Arthrobacter sp. Y1

Arthrobacter sp. Y1, capable of metabolizing p-nitrophenol (PNP) as the sole carbon, nitrogen and energy source was isolated from activated sludge. The bacterium could tolerate concentrations of PNP up to 600 mg L^{? 1}, and degradation of PNP was achieved within 120 h of incubation. PNP and its metabolites were analyzed by high performance liquid chromatography (HPLC). The metabolite formed indicated that the organism followed the 4-nitrocathechol (4-NC) pathway for metabolism of this compound. The relevant degrading-enzyme was extracellular. Addition of other carbon source (glucose 0～ 30 g L^{? 1}) led to accelerated degradation. If the glucose concentration exceeded 30 g L^{? 1}, however, degradation was repressed. Spectrophotometry assay of the nitrite and genotoxic study showed that strain Y1 could detoxify PNP. Therefore, the present study may provide a basis for the development of the bioremediation strategies to remedy the pollutants in the environment.     

Tracing the transformation of labelled [1-13C]phenanthrene in a soil bioreactor

[1-(13)C]-labelled phenanthrene was incubated in a closed bioreactor to study the flux and biotransformation of polycyclic aromatic hydrocarbon (PAH) in contaminated soils on a bulk and molecular level. The degradation of extractable phenanthrene was observed by GC-MS measurements and the mineralisation was monitored by (13)CO(2) production. The transformation of the (13)C-label into non-extractable soil-bound residues was determined by carbon isotopic measurements. With these data we were able to calculate a carbon budget of the (13)C-label. Moreover, the chemical structure of non-extractable bound residues was characterised by applying selective chemical degradation reactions to cleave xenobiotic subunits from the macromolecular organic soil matrix. The obtained low molecular weight products yielded (13)C-labelled compounds which were identified using IRM (isotope ratio monitoring)-GC-MS and structurally characterised with GC-MS. Most of the (13)C-labelled products obtained by chemical degradation of non-extractable bound residues are well-known metabolites of phenanthrene. Thus, metabolites of [1-(13)C]phenanthrene formed during biodegradation appear to be reactive components which are subsequently involved in the bound residue formation. Hydrolysable amino acids of the soil residues were significantly labelled with (13)C as confirmed by IRM-GC-MS measurements. Therefore, phenanthrene-derived carbon was transformed by anabolic microbial processes into typical biologically derived compounds. These substances are likely to be incorporated into humic-like material after cell death.     

Overexpressing GSH1 and AsPCS1 simultaneously increases the tolerance and accumulation of cadmium and arsenic in Arabidopsis thaliana

The goal of this study was to develop transgenic plants with increased tolerance for and accumulation of heavy metals and metalloids from soil by simultaneous overexpression of AsPCS1 and GSH1 (derived from garlic and baker's yeast) in Arabidopsis thaliana. Phytochelatins (PCs) and glutathione (GSH) are the main binding peptides involved in chelating heavy metal ions in plants and other living organisms. Single-gene transgenic lines had higher tolerance to and accumulated more Cd and As than wild-type. Compared to single-gene transgenic lines, dual-gene transformants exhibited significantly higher tolerance to and accumulated more Cd and As. One of the dual-gene transgenic lines, PG1, accumulated twice the amount of Cd as single-gene transgenic lines. Simultaneous overexpression of AsPCS1 and GSH1 led to elevated total PC production in transgenic Arabidopsis. These results indicate that such a stacking of modified genes is capable of increasing Cd and As tolerance and accumulation in transgenic lines, and represents a highly promising new tool for use in phytoremediation efforts.     

Genetic polymorphisms in CYP1A1 and GSTM1 predispose humans to PCBs/PCDFs-induced skin lesions

INTRODUCTION: Polychlorinated biphenyls (PCBs) and dibenzofurans (PCDFs) are ubiquitous persistent pollutants in humans. Whether people with different genotypes are with different susceptibility to these chemicals are unknown. In a group of people highly exposed to PCBs/PCDFs, we tested the hypothesis that genotypic polymorphisms affected susceptibility for development of skin manifestations. METHODS: In 1979, approximately 2000 people in central Taiwan ingested cooking oil contaminated with PCBs/PCDFs. Skin disorder such as chloracne, abnormal nail, hyperkeratosis and skin allergy were found in PCBs/PCDFs exposed group. We recruited exposed and community background exposure subjects for blood testing and telephone-interview. Single nucleotide polymorphisms, AhR Arg554Lys, CYP1A1 Ile462Val, CYP1A1 T6235C, and GSTM1/T1 deletion, were determined. Occurrence of skin manifestations was compared among people with different genotypes while stratified by PCB exposure levels by logistic regression. RESULTS: Data on exposure, medical history, and genotypes were obtained from 393 exposed and 181 background exposure groups. Skin manifestations including chloracne, allergy, abnormal nail, and hyperkeratosis were more prevalent in exposed people in a dose-related manner. Among highly exposed individuals, combined CYP1A1-MspI mutant genotype and GSTM1-null genotype were associated with increased risk of chloracne (odds ratio 2.8, 95% confidence interval 1.1-7.6). Among intermediately exposed individuals, GSTM1 null genotype was associated with skin allergy. AhR Arg554Lys genotype and GSTT1 null genotype were not related to susceptibility to skin manifestations in PCB/PCDF-exposed population. CONCLUSION: CYP1A1 and GSTM1 genotypic polymorphisms might be related to the susceptibility to PCB/PCDF-induced skin manifestations.     

Heterogeneous reactions of ozone with pyrene, 1-hydroxypyrene and 1-nitropyrene adsorbed on particles

This work deals with the kinetic study of the reactions of ozone with pyrene, 1-hydroxypyrene and 1-nitropyrene, adsorbed on model particles. Experiments were performed at room temperature and atmospheric pressure, using a quasi-static flow reactor in the absence of light. Compounds were extracted from particles using pressurized fluid extraction (PFE) and concentration measurements were performed using gas chromatography/mass spectrometry (GC/MS). The pseudo-first order rate constants were obtained from the fit of the experimental decay of particulate polycyclic compound concentrations versus reaction time. Experiments were performed at three different O₃ concentrations from which second order rate constants were calculated. The following rate constant values were obtained at 293 K: k(O₃ + Pyrene) = (3.2 ± 0.7) × 10^?16 cm³ molecule^?1 s^?1; k(O₃ + 1OHP) = (7.7 ± 1.4) ×10 ^?16 cm³ molecule^?1 s^?1; and k(O₃ + 1NP) = (2.2 ± 0.5) × 10^?17 cm³ molecule^?1 s^?1, for pyrene, 1-hydroxypyrene and 1-nitropyrene adsorbed on silica particles. The variation in the rate constants demonstrates the strong influence of the substituent (OH or NO₂) on the heterogeneous reactivity of pyrene. The pyrene particulate concentration was also varied in order to check how this parameter may influence the experiments. Finally, oxidation products were investigated for all reactions and some were detected and identified for the first time for ozone heterogeneous reaction with pyrene adsorbed on particles.     

New cytochrome P450 1B1, 1C1, 2Aa, 2Y3, and 2K genes from Chinese rare minnow (Gobiocypris rarus): Molecular characterization,basal expression and response of rare minnow CYP1s and CYP2s mRNA exposed to the AHR agonist benzo[a]pyrene

Cytochrome P450 (CYP450) genes play an important role in catalyzing oxidative metabolism of toxicants. Recently, CYP1 subfamily were discovered and reported in fish, however, little is known regarding the CYP2 isoforms in fish. In the present study, the cDNA fragments of CYP 1B1 and 1C1 and CYP2Aa, 2Y3, and 2K of rare minnow were cloned and exhibited a high amino acid sequence identity compared with their zebrafish orthologs. Basal expression showed CYP1C1 and CYP 2Aa expression were observed in all eight tissues analyzed (liver, gill, intestine, kidney, spleen, brain, skin, and muscle). CYP 1A, and 1B1 expression was found in all tissues except for muscle and skin. However, CYP 2Y3 was expressed in liver, spleen, intestine and muscle whereas CYP 2 K in liver, kidney and intestine. 4 and 100 μg L⁻¹ Benzo[a]pyrene (BaP) induced patterns showed that CYP 1A, 1B1 and 1C1 expression in liver, gill, and intestine was strongly up-regulated (p < 0.05). Furthermore, CYP 2Y3 was strongly induced in liver from BaP treatments (p < 0.05). The high induction on mRNA level of CYP1s and CYP 2Y3 by BaP could be associated with catalyzing detoxification and indicated that CYP2s may also be potential biomarker to screen AHR agonist. The high responsiveness of CYP1 and 2 genes suggested Chinese rare minnow is feasible to screen and assess pollution with AHR agonist.     

Numerical validation of a Eulerian hydrochemical code using a 1D multisolute mass transport system involving heterogeneous kinetically controlled reactions

It is demonstrated that at steady state, the 1D thermo-kinetic hydrochemical Eulerian mass balance equations in pure advective mode are indeed identical to the governing mass balance equations of a single reaction path (or geochemical) code in open system mode. Thus, both calculated reaction paths should be theoretically identical whatever the chemical complexity of the water-rock system (i.e., multicomponent, multireaction zones kinetically and equilibrium-controlled). We propose to use this property to numerically test the thermo-kinetic hydrochemical Eulerian codes and we employ it to verify the algorithm of the 1D finite difference code KIRMAT. Compared to the other methods to perform such numerical tests (i.e., comparisons with analytical, semi-analytical solutions, between two Eulerian hydrochemical codes), the advantage of this new method is the absence of constraints on the chemical complexity of the modelled water-rock systems. Moreover, the same thermo-kinetic databases and geochemical functions can be easily and mechanically used in both calculations, when the numerical reference comes from the Eulerian code with no transport terms (u and D = 0) and modify to be consistent with the definition of the open system mode in geochemical modelling. The ability of KIRMAT to treat multicomponent pure advective transport, subjected to several kinetically equilibrium-controlled dissolution and precipitation reactions, and to track their boundaries has been successfully verified with the property of interest. The required numerical validation of the reference calculations is bypassed in developing the Eulerian code from an already checked single reaction path code. A forward time-upstream weighting scheme (a mixing cell scheme) is used in this study. An appropriate choice of grid spacing allows to calculate within the grid size uncertainty the correct mineral reaction zone boundaries, despite the presence of numerical dispersion. Its correction enables us to improve the convergence and to extend the numerical test to mixed advective-dispersive mass transport. However, the skewness factor involves numerical oscillations that prevent to compute different grid spacing. The use of a different chemically controlled time step constraint in both calculations induces some inconsistencies into the validation tests. This numerical validation method may be applied as well as to check a thermo-kinetic hydrochemical finite element based code, from a 1D heterogeneous systems, and 2D-3D systems provided that they are designed so as to be 1D equivalent. A one-step algorithm and the use of a numerical reference coming from the Eulerian code to be tested ensure the potential success (accuracy) of the numerical validation method.     

Fate of Bacillus thuringiensis (Bt) Cry3Bb1 protein in a soil microcosm

Transgenic crops expressing insecticidal, crystalline (Cry) Bacillus thuringiensis (Bt) proteins were commercialized in the US in 1996. There is little information in the peer-reviewed literature on the environmental fate of the coleopteran-active Bt Cry3Bb1 protein expressed in event MON863 corn. The exposure characterization of Bt proteins is unique in that the fate of the protein in soil and in crop residue must be considered. To date, the significance of macrodecomposing organisms, such as earthworms, isopods, and springtails, to the dissipation of Bt proteins present in crop residue has not been assessed. In addition, the input of Bt proteins into soil through leaching from post-harvest crop residue has not been examined. Two laboratory microcosm studies were conducted to determine the fate of Bt Cry3Bb1 in decomposing MON863 corn residue and to determine whether Bt proteins can enter soil by leaching from crop residue. In addition, the importance of macrodecomposing organisms to the degradation of Bt proteins in corn residue was assessed. Laboratory microcosms containing MON863 corn leaf, root, and stalk with and without macrodecomposers were used to examine the fate of Bt Cry3Bb1 in post-harvest MON863 corn residue. A half-life of less than five days was found for Bt Cry3Bb1 protein in decomposing MON863 corn residue. There was a trend of increasing half-life of Cry3Bb1 in microcosms containing macrodecomposers, however, this trend was only significant (p<0.05) for Bt Cry3Bb1 in MON863 leaf tissue and this increase is not likely relevant for non-target exposure. The recovery of Bt Cry3Bb1 protein from soil extracts was either below the limit of quantification (9 ng g(-1) soil) or below the limit of detection (0.7 ng mL(-1)) at all time points during the study. Based on the results from this study, Bt protein leaching from post-harvest crop residue is not a significant contributor to Bt protein input into soil.     

Microbial ecotoxicity and mutagenicity of 1-hydroxypyrene and its photoproducts.

1-Hydroxypyrene (1-HP) is a carcinogenic and slightly water-soluble polycyclic aromatic hydrocarbon. Ecotoxicity and mutagenicity of 1-HP and its photoproducts, and the effect of Mn2+ and Cu2+ on their mutagenicity were measured with microbial assay in this study. The assay includes spread plate counting, direct counting, microbial mineralization of 14C-UL-D-glucose and Mutatox Test. At the concentration examined (0.8 microM), the photoproducts (after 1.5 h solar irradiation) of 1-HP inhibited microbial glucose mineralization activity (by 64%) after microbial assemblages of a local reservoir site were exposed for 1 day. However, heterotrophic bacteria were able to utilize 1-HP photoproducts as the growth substrates and increase viability counts by up to 4.75-folds. 1-HP exhibited positive response to Mutatox Test in both direct medium and S-9 medium, with the lowest observable effective concentration of 0.625 microM in the test with direct medium. After photolysis, 1-HP decreased its mutagenicity. Mn2+ (312.5 microM-5 mM) and Cu2+ (6.25-100 microM) themselves are not mutagenic. However, addition of the metal ions before or after photolysis modifies the light readings of 1-HP during the test. Therefore, presence of metal ions could affect the genotoxicity of 1-HP in aquatic environments, depending on timing of the addition.     

Heavy metal contamination from mining sites in South Morocco: 1. Use of a biotest to assess metal toxicity of tailings and soils

Our work was conducted to investigate the heavy metal toxicity of tailings and soils collected from five metal mines located in the south of Morocco. We used the MetPAD biotest Kit which detects the toxicity specifically due to the heavy metals in environmental samples. This biotest initially developed to assess the toxicity of aquatic samples was adapted to the heterogeneous physico-chemical conditions of anthropogenic soils. Contrasted industrial soils were collected from four abandoned mines (A, B, C and E) and one mine (D) still active. The toxicity test was run concurrently with chemical analyses on the aqueous extracts of tailings materials and soils in order to assess the potential availability of heavy metals. Soil pH was variable, ranging from very acidic (pH 2.6) to alkaline values (pH 8.0-8.8). The tailings from polymetallic mines (B and D) contained very high concentrations of Zn (38,000-108,000 mg kg(-1)), Pb (20,412-30,100 mg kg(-1)), Cu (2,019-8,635 mg kg(-1)) and Cd (148-228 mg kg(-1)). Water-extractable metal concentrations (i.e., soil extracts) were much lower but were highly toxic as shown by the MetPAD test, except for soils from mines A, E and site C3 from mine C. The soil extracts from mine D were the most toxic amongst all the soils tested. On this site, the toxicity of soil water extracts was mainly due to high concentrations of Zn (785-1,753 mg l(-1)), Cu (1.8-82 mg l(-1)) and Cd (2.0-2.7 mg l(-1)). The general trend observed was an increase in metal toxicity measured by the biotest with increasing available metal contents in tailings materials and soils. Therefore, the MetPAD test can be used as a rapid and sensitive predictive tool to assess the heavy metal availability in soils highly contaminated by mining activities.