Backyard of the rich north: the climate change-related vicious circle of the Arctic zone

The Arctic zone is full of controversies, unknowns, contrasts, and challenges. The following example is enlightening. Saudi Arabia is a country that has been considered to have almost unlimited possibilities because of its enormous oil earnings. The country has US$60 thousand million purchasing power parity oil income each year for its mere 22 million inhabitants. Astonishingly, the Arctic zone's income from oil, gas, and minerals is at least as large as that of Saudi Arabia, modestly estimated, but the Arctic has less than 4 million people. Most money, however, flows away from the tundra, yet social and environmental problems remain there. A part of the side effect of consuming these resources-largely fossil fuels-returns to the Arctic in the form of greenhouse warming and all its consequences. The Arctic zone now warms at approximately double the rate of the world average.     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

Estimation of the net air-sea flux of ammonia over the southern bight of the North Sea

Measurements of airborne gaseous ammonia and total dissolved ammonium in sea water determined on cruises on the North Sea have been used to calculate net fluxes of ammonia between air and sea. The system is finely balanced with the majority of net fluxes from air to sea, but some periods occur when the sea becomes a net source of ammonia in air. Examination of the field data suggests that the main factor determining the direction of flux is the airborne ammonia concentration, which when elevated causes ammonia deposition to the sea. It is calculated that ammonia deposition to the southern bight of the North Sea (below 56°N) amounts to 7.6 x 103 tonnes N per year, about one-half of an earlier upper limit estimate. Comparison with studies from the Pacific Ocean, in which the sea acts as a source of atmospheric ammonia, reveals that the major differences arise from much higher concentrations of airborne ammonia in the North Sea atmosphere caused by advection from adjacent land.     

上海河流氮负荷的年际变化及其水体富营养化的原因探讨

利用1990-2002年水质监测数据,分析了上海河流水体中氮负荷(总氮和氨氮)的年际变化特征：从整体上来看,上海河流水体氮负荷较大,氮污染严重:苏州河、黄浦江下游河段氮负荷明显高于上游河段,市区河流氮负荷明显高于郊区河流;从年际变化上看,苏州河、黄浦江、市区河流(除龙华港)水体历年氮含量有降低趋势,郊区河流水体历年氮含量有增长趋势。在此基础上,从六个方面讨论了造成上海河流水体富营养化的原因,以期为上海市河流综合整治的规划决策提供重要的科学依据。     

Determining the role of human substances in the fate of pesticides in the environment

The data presented in this paper emphasize that the behavior and fate of pesticides in the environment is influenced by humic substances. Various methods most frequently used for the characterization of humic substances are discussed. Both humic acid and fulvic acid can solubilize in water certain organic compounds and are important carriers of some pesticides in soil. Humic substances have the potential for promoting the nonbiological degradation of many pesticides. Several methods of bleaching humus color from drinking water, including chlorination, ozonation, and UV-radiation, are described. Finally, the photochemical stability to UV-radiation of certain pesticides in aqueous fulvic acid solution is discussed.     

Determining the role of humic substances in the fate of pesticides in the environment

Abstract

The data presented in this paper emphasize that the behavior and fate of pesticides in the environment is influenced by humic substances. Various methods most frequently used for the characterization of humic substances are discussed. Both humic acid and fulvic acid can solubilize in water certain organic compounds and are important carriers of some pesticides in soil. Humic substances have the potential for promoting the nonbiological degradation of many pesticides. Several methods of bleaching humus color from drinking water, including chlorination, ozonation, and UV‐radiation, are described. Finally, the photochemical stability to UV‐radiation of certain pesticides in aqueous fulvic acid solution is discussed.     

An alternative for the nitrobenzylpyridine test for the description of the toxicity of alkylating agents

When correlating the biologic activity of alkylating agents with physicochemical parameters, the reaction rate constant of the reaction with 4-(p-nitrobenzyl) pyridine (NBP) is often used as a measure of the compounds chemical reactivity. Since the use of NBP suffers some drawbacks from an experimental point of view, it was decided to develop an alternative test method, using thiourea as a standard nucleophile.Reactivities obtained with both methods for six halogenated alkylating agents are compared, and the usefulness of the new experimental method is discussed.     

On the possible role of the biosphere in the control of atmospheric clouds and precipitation

It is well documented that atmospheric sulfate particles constitute the major class of cloud condensation nuclei. Under natural conditions, not disturbed by human activities, sulfate particles form from gaseous precursors released by the biosphere. In this way the biosphere plays an important role in the control of the cloud cover and consequently of the albedo of the Earth-atmosphere system. On the other hand, cloud condensation nuclei of biospheric origin make the redistribution of water on the Earth surface possible which is of crucial importance for the existence of living species.     

The Costs of Meeting the Environmental Objectives for the Baltic Sea: A Review of the Literature

The environmental targets of the recently agreed Baltic Sea Action Plan (BSAP) targets are likely associated with a considerable cost, which motivates a search for low-cost policies. The following review shows there is a substantial literature on cost-efficient nutrient reduction strategies, including suggestions regarding low-cost abatement, but actual policies at international and national scale tend to be considerably more expensive due to lack of instruments that ensure a cost-efficient allocation of abatement across countries and sectors. Economic research on the costs of reducing hazardous substances and oil spill damages in the Baltic Sea is not available, but lessons from the international literature suggest that resources could be used more efficiently if appropriate analysis is undertaken. Common to these pollution problems is the need to ensure that all countries in the region are provided with positive incentives to implement international agreements.     

On the forming mechanism of the cleaning airflow of pulse-jet fabric filters

To reveal the formation mechanism of a pulse-jet airflow’s cleaning effect in a filter bag, a theoretical model is built by using the theory of the gas jet and unitary adiabatic flow according to given specifications and dimensions of the bags and resistance characteristics of the cloth and dust layer. It is about the relationship between cleaning system structure and operating parameters. The model follows the principle that the flow and kinetic energy of jet flow injected into a filter bag should be consistent with the flow of cleaning airflow in the bag and the pressure drop flowing through the filter cloth and dust layer. The purpose of the model is to achieve the peak pressure of cleaning airflow, which dominates the effect of the pulse-jet cleaning process. The cleaning system structure includes air pressure in the nozzle, structure and size of nozzle, exit velocity of nozzle, jet distance, and diameter of jet cross section. Based on the condition of the cleaning system structure and operating parameters established by using the theoretical model, Fluent software is applied to carry out a numerical simulation of the jet airflow field at the nozzle’s outlet, jet airflow field between nozzle and bag top, and cleaning airflow field in the filter bag. Experimental results are used to verify the reliability of the theoretical model. They are obtained in a pilot-scale test filter with a single bag, with length 2 m and in general full-scale dimensions of the cleaning system. The results show that when any rectification measure is not installed at the bag opening, the cross-sectional area covered by the jet gas is hardly sufficient to cover the entire area of the bag opening. A large portion of the gases injected into the filter bag will overflow reversely upward from the edge due to pressure differences between the upper area and lower area inside the bag opening. This led to a serious shortage of the cleaning airflow and ar limited increase in static pressure. When a venturi-type rectifier tube is installed at the bag opening, the jet flow is converted to funnel flow for which the cross-section velocity distribution is more uniform at the throat of the rectifier tube due to the guided effects of the upper tapered pipe. Then it is transited to stressful flow below the bag opening via rectified effects of the lower dilated pipe. The results show that the gap between the static pressure of gas in the bag and the expected value is significantly reduced. The theoretical value of the nozzle diameter is enlarged to compensate for two aspects of adverse effects of cleaning airflow and energy. This is because the flow is not a purely free-form jet from the nozzle to the entrance of the rectifier tube and because the gas suffers from local resistance while flowing through the rectifier tube. The numerical simulation and experiment show that the peak pressure of cleaning airflow in the filter bag is able to reach the expected value. The results confirm that the mechanism of the pulse-jet cleaning airflow and the calculation method of the pulse-jet cleaning system structure and operating parameters offered in this study are correct. The study results provide a scientific basis for designing the system of pulse-jet fabric filters.

Implications: Pulse-jet cleaned fabric filters are commonly used for air pollution control in many industries. Pulse-jet cleaning is widely used for this purpose as it enables frequent cleaning while the filter is operating. However, the theoretical system of the forming mechanism of the pulse-jet cleaning has not formed so far. This indicates the theoretical model plays an important role in designing effective pulse-jet cleaned fabric filters.     

Numerical evaluation of the PCBs transport over the Northern Hemisphere

The numerical evaluation of selected PCB congener (28, 118, 153, 180) transport over the Northern Hemisphere is carried out for 1996 using MSCE-POP model. This model is a multicompartment three-dimensional one and includes various environmental media such as the atmosphere, soil, vegetation, seawater, and sea ice. The spatial resolution is 2.5 degrees x2.5 degrees for all media except marine one (1.25 degrees x1.25 degrees ). The main model output information is deposition fluxes, spatial distribution of concentrations in environmental media, pathways and source-receptor relationships. Calculation results are analysed for the whole hemisphere and the Arctic region. In particular, this gives an opportunity to estimate the contributions of individual emission source groups to the Arctic pollution. The reliability of the model assessment is analysed by comparison between calculated and observed data.     

A review of the likely causal pathways relating the reduced density of breeding dippers Cinclus cinclus to the acidification of upland streams

Previous work has shown that the breeding density of a bird characteristic of upland streams, the dipper Cinclus cinclus, is markedly reduced at low pH in both Wales and Scotland. Populations also declined when streams became more acidic. Evidence of causal explanation for these relationships is that: (1) Food quantity is reduced in acidic streams, and important prey, including those rich in calcium, are scarce; (2) Blood chemistry in pre-breeding birds differs between acid and circumneutral streams, with plasma calcium reduced in those breeding at low pH. Skeletal sources of calcium are probably limited; (3) The time spent foraging by pre-breeding birds on acidic streams is markedly increased, even though overall energy costs on acidic and circumneutral streams are similar. Body condition is inferior to birds on circumneutral streams; (4) Egg laying is significantly delayed on acidic streams irrespective of an effect on laying of altitude, and clutch and brood sizes are significantly reduced; (5) Eggs are lighter and shells thinner at low pH; (6) Chick growth is reduced at low pH; (7) Contamination by heavy metals and persistent organochlorines is low in the populations on acidic streams and cannot explain the impaired breeding performance. None of these features can exclude the possibilities that acidic streams either hold populations of poor quality birds, which show the above features, or that acidity affects the breeding ecology of all dippers that attempt to breed at low pH. The qualitative outcome of these two alternatives is identical.     

Spectrophotometric Determination of Atmospheric Acidity by means of the Displacement of the Equilibrium of Acid-Base Indicators

A method is described for determining acidity by means of the spectrophotometric determination of the displacement of the equilibrium of açid-base indicators. The method is simple, sensitive and free of known interferences. There is no dependence on costly or sophisticated equipment and the results obtained are reliable and reproducible.     

Adsorption-oxidation of hydrogen sulfide on activated carbon fibers: effect of the composition and the relative humidity of the gas phase

The removal of hydrogen sulfide by oxidation-adsorption on two type carbon fibers, Actitex FC1201 and RS1301, was studied. Two kinetic steps where identified. During the first step, the degradation appears to be limited by the oxidation reaction. In the second kinetic step, the by-products inhibit the hydrogen sulfide degradation. This leads to a limitation in the carbon site's accessibility and to a lower kinetic. The Langmuir-Hinshelwood model was used to correlate the experimental results and to estimate the kinetic (k) and the Langmuir adsorption (K) constants. For FC1201 fibers, the kinetic constant (k) is five time higher and the adsorption constant is five time lower compared to the RS1301 fibers. The role of the humidity was found to be highly beneficial for the removal of hydrogen sulfide. Especially in the second kinetic step, where it removes the by-product formed and therefore delays the occurrence of this low kinetic step. The kinetic constant (k) is strongly influenced by humidity while the Langmuir adsorption constant (K) seems independent. The effect of the nature of the gas phase on the reaction kinetic was also studied. Under a dry atmosphere, we note that the oxidation-reaction occurs even if the gaseous oxygen is not present. This oxidation is due to the oxygen surface function of the carbon fibers. Moreover, the degradation kinetic is faster under a dry nitrogen atmosphere. The presence of water traces leads to the acidification of the carbon surface, under oxygen or carbon dioxide atmospheres, and hence limits the hydrogen sulfide dissociation. In a humid atmosphere, the oxygen or carbon dioxide leads to a faster reaction kinetic. The acidification of the carbon surface is largely counterbalanced by the dissolution of the by-products.     

不同类型机动车尾气中芳香烃化合物含量分析

首次对北京市9种车辆、5种燃料在不同工况下排放芳香烃化合物的特征．进行了定量研究。结果表明,车型、燃料、净化器及工况等因素对排放量产生影响,电喷车比化油器车芳香烃化合物排放量低;汽油车排放量最高,柴油车其次,LPG及CNG车排放量最低;使用净化器可以降低芳香烃排放量;不同工况对排放量的影响随车型,燃料类型的不同而不同。     

Impacts of the physiochemical properties of chlorinated solvents on the sorption of trichloroethylene to the roots of Typha latifolia

Sorption to plant roots is the first step for organic contaminants to enter plant tissues. Mounting evidence is showing that sorption to plant roots is nonlinear and competitive. The objective of this study was to investigate the effects of physiochemical properties of homologous chlorinated ethenes and ethanes on the competitive sorption of trichloroethylene (TCE) to the roots of Typha latifolia (cattail). The results showed that chlorinated ethenes exerted significantly stronger competition on the sorption of TCE than chlorinated ethanes. Individual physiochemical properties of organic compounds could be related to the competitive capacity of chlorinated ethenes, but the roles appeared secondary, with molecular structures showing primary effects. Based on these observations, a two-step sorption mechanism was proposed, consisting of the interactions between organic compounds and functional groups on the root surface and subsequent pore filling and absorption to the hydrophobic domains in the composition of roots.     

Mineralization of CCl4 by the UVC-photolysis of hydrogen peroxide in the presence of methanol

A method for a photochemically induced mineralization of CCl4 is described in which use is made of reductive radicals. The UVC-photolysis (254 nm) of H2O2 added to aqueous solutions of CCl4 is leading to the homolysis of the oxidant yielding hydroxyl radicals (HO) that subsequently react with added methanol to generate hydroxymethyl radicals (CH2OH). The latter radicals initiate mineralization of CCl4 by reductive C-Cl bond splitting. CHCl3, C2Cl4 and C2Cl6 were found as reaction intermediates, but are quantitatively depleted in a parallel oxidative reaction manifold leading to mineralization. Carbon dioxide radical anion, CO2(-), an intermediate in the mineralization pathway of methanol, is also shown to initiate the mineralization of CCl4 by reductive dechlorination. A reaction mechanism is proposed and validated with computer simulations of all the experimental results.     

Minimization of the environmental impact in the unhairing of bovine hides

This study tests an alternative method to the traditional unhairing method used during the process of tanning the hides. The new method is based on the substitution of sodium sulfide by hydrogen peroxide as an unhairing agent in both hair recovery and recirculation of the floats employed in the process. The properties of the hides obtained using the two methods have been compared and the results indicate that those hides have similar physical, chemical, and organoleptic properties. However, the differences existing from an environmental point of view are significant. These include reductions of water consumption (approx 70%), chemical oxygen demand (approx 35%), toxicity (98%) and total kjendhal nitrogen (50%). Also, the risk associated with the production of hydrogen sulfide is eliminated, which implies a great improvement in terms of safety for the workers. Given the large amounts of water and chemical pollution discharged in the process, the reductions in absolute values represent a significant improvement. A financial assessment was carried out to demonstrate that the proposed new system is 16% more economic than the traditional one.     

Recent trends of the emission characteristics from the road construction industry

Bitumen is a black, thermoplastic, hydrocarbon material derived from the processing of crude oil. At ambient temperature, bitumen is solid and does not present any health/environmental risks. This is one of the main reasons that bitumen is widely used for road construction all over the world. But during manufacturing/modification according to its application, storage, transportation, and use of bitumen is heated giving off various hydrocarbons emissions. In recent years, there has been increasing interest in investigating the potential of bitumen emissions to cause health effects. This is mainly because of the reason that bitumen has small amount of poly-aromatic hydrocarbons, along with some other volatiles like benzene, toluene, etc., which are known to be carcinogenic in nature. Thus, assessment of the emission characteristics and health hazards of bitumen fumes may have far reaching industrial economic and public health implications. In this review, we will discuss about the emission characteristics from bitumen, asphalts, or road construction, which is mainly contributed by bitumen fumes. Sampling strategies and analytical methods employed are also described briefly.