Synthesis of magnetite-based nanocomposites for effective removal of brilliant green dye from wastewater

Environmental Science and Pollution Research - The present study aims at evaluating the batch scale potential of cotton shell powder (CSP), Moringa oleifera leaves (ML), and magnetite-assisted...     

Characterisation of water-soluble protein powder and optimisation of process parameters for the removal of sulphonamides from wastewater

Environmental Science and Pollution Research - A valuable method for the efficient removal of sulphonamides from wastewater using protein powder extracted from the seeds of Moringa stenopetala is...     

Does the application of silicon and Moringa seed extract reduce heavy metals toxicity in potato tubers treated with phosphate fertilizers?

Environmental Science and Pollution Research - Two field trials were carried out in two successive agricultural seasons to study the possibility of using silicon (Si) and Moringa seed extract (MSE)...     

Molluscicidal activity of Ferula asafoetida, Syzygium aromaticum and Carum carvi and their active components against the snail Lymnaea acuminata

The molluscicidal activity of dried root latex powder of Ferula asafoetida, flower-bud powder of Syzygium aromaticum and seed powder of Carum carvi against the snail Lymnaea acuminata was studied. The molluscicidal activity of all the three plant products was found to be both time and concentration dependent. The toxicity of S. aromaticum flower-bud powder (96 h LC(50):51.98 mg/l) was more pronounced than that of root latex powder of F. asafoetida (96 h LC(50):82.71 mg/l) and seed powder of C. carvi (96 h LC(50):140.58 mg/l). Ethanol extract was more toxic than other organic extracts. The ethanol extract of S. aromaticum (24h LC(50):83.53 mg/l) was more effective than that of F. asafoetida (24h LC(50):132.31 mg/l) and C. carvi (24h LC(50):130.61 mg/l) in killing the test animals. The 96 h LC(50) of column purified fraction of seed powder of C. carvi was 5.40 mg/l whereas those of flower-bud powder of S. aromaticum and dried root latex powder of F. asafoetida were 7.87 and 9.67 mg/l, respectively. The product of F. asafoetida, S. aromaticum and C. carvi may be used as potent molluscicides.     

In vitro fermentation and production of methane and carbon dioxide from rations containing Moringa oleifera leave silage as a replacement of soybean meal: in vitro assessment

Environmental Science and Pollution Research - Plant leaf meal of some forage trees such as Moringa oleifera has attracted an increasing interest as a good and cheap source of protein. The present...     

Synergism of MGK-264 and piperonyl butoxide on the toxicity of plant derive molluscicides

The binary mixture of ethanolic extract of powder, hecogenin, tigogenin, seed powder and thymol with synergiats MGK-264 and piperony butoxide in a 1:5 ratio were used against the . It was observed that the toxic effect of these mixtures were time and dose dependent. The binary mixtures of plant molluscicides with synergist were more toxic with respect to the independent toxicity of these plant molluscicides. Maximum synergistic action (10 fold) of MGK-264 and piperonyl butoxide was observed with hecogenin.     

添加晶种对沼气发酵液磷回收的影响研究

以畜禽养殖废水经厌氧消化处理后的沼气发酵液为研究对象,采用曝气吹脱调节pH的处理方式。晶种采用海泡石粉、沸石粉和凹凸棒石粉3种天然矿物材料。考察了不同pH条件、晶种添加量和不同初始磷负荷对磷回收的影响,并利用扫描电镜-能谱分析仪(SEM-EDX)对产物进行了表征分析。结果表明:3种晶种材料中,凹凸棒石粉对磷回收的促进效果最好。在pH从7.5到8.5之间海泡石粉、沸石粉和凹凸棒石粉均可将Rp(t)提高10%以上,8.5到9.5之间,添加海泡石粉和沸石粉对Rp(t)的提升幅度降低,添加凹凸棒石粉可以达到14%左右的提升幅度。海泡石粉和沸石粉添加量增大后Rp(t)有小幅的提升,但变化不规律,凹凸棒石粉的最佳添加量为0.92 g/L。初始PO43--P为90 mg/L时凹凸棒石粉对磷回收有最好的促进效果。添加凹凸棒石粉的产物在SEM图片上可看到明显有晶体覆盖,EDX图上出现了明显的强度较大的P组分峰,从微观的角度证实了添加凹凸棒石粉的促进作用。     

Leaching and sorption of neonicotinoid insecticides and fungicides from seed coatings

Seed coatings are a treatment used on a variety of crops to improve production and offer protection against pests and fungal outbreaks. The leaching of the active ingredients associated with the seed coatings and the sorption to soil was evaluated under laboratory conditions using commercially available corn and soybean seeds to study the fate and transport of these pesticides under controlled conditions. The active ingredients (AI) included one neonicotinoid insecticide (thiamethoxam) and five fungicides (azoxystrobin, fludioxonil, metalaxyl, sedaxane thiabendazole). An aqueous leaching experiment was conducted with treated corn and soybean seeds. Leaching potential was a function of solubility and seed type. The leaching of fludioxonil, was dependent on seed type with a shorter time to equilibrium on the corn compared to the soybean seeds. Sorption experiments with the treated seeds and a solution of the AIs were conducted using three different soil types. Sorption behavior was a function of soil organic matter as well as seed type. For most AIs, a negative relationship was observed between the aqueous concentration and the log K_oc. Sorption to all soils tested was limited for the hydrophilic pesticides thiamethoxam and metalaxyl. However, partitioning for the more hydrophobic fungicides was dependent on both seed type and soil properties. The mobility of fludioxonil in the sorption experiment varied by seed type indicating that the adjuvants associated with the seed coating could potentially play a role in the environmental fate of fludioxonil. This is the first study to assess, under laboratory conditions, the fate of pesticides associated with seed coatings using commercially available treated seeds. This information can be used to understand how alterations in agricultural practices (e.g., increasing use of seed treatments) can impact the exposure (concentration and duration) and potential effects of these chemicals to aquatic and terrestrial organisms.     

Soil distribution of fipronil and its metabolites originating from a seed-coated formulation

Seed-coating with the insecticide fipronil has been intensively used in sunflower cultivation to control soil pests such as wireworms. A research project was undertaken to determine the soil distribution of fipronil and of its main phenylpyrazole metabolites. Under agronomic conditions, the quantity of fipronil in the seed-coat (437 microg/seed) decreased continuously during the cultivation period (3.9 microg day(-1) during the first two months; 0.3 microg day(-1) during the next four months). At the end of the cultivation period, 42% of all phenylpyrazole compounds remained in the seed-coat. Fipro nil was poorly mobile in soil, and at the end of the cultivation period it was mostly concentrated in the soil layer close to the seed (3240 microg kg(-1) soil). Starting from the seed-coating, a fipronil concentration gradient was measured in the soil, up to a distance of 11 cm from the seed. Degradation in the soil occurred at a moderate rate, probably due to the fact that water solubilization of the solid active ingredient present in the seed coating was rate limiting. Indeed, after 6 months of cultivation, only 51% of the fipronil seed-coating was found in the soil, about 7% having been absorbed by the sunflower plant, and 42% remaining in the seed coat. The predominant metabolites produced in the soil were sulfone-fipronil, sulfide-fipronil and amide-fipronil, which were produced at average rates of 5 microg kg(-1) soil day(-1), 3 microg kg(-1) soil day(-1), and 0.4 microg kg(-1) soil day(-1), respectively. In contrast, the photoproduct, desulfinyl-fipronil, was barely detected. All phenylpyrazole compounds were poorly mobile, except for the amide derivative, which is devoid of insecticidal activity in marked contrast to the other metabolites. Furthermore, detectable soil contamination was limited to a zone of about 11 cm around the seed.     

Heterogeneous SOA yield from ozonolysis of monoterpenes in the presence of inorganic acid

The secondary organic aerosol (SOA) yield of a series of montoerpenes was investigated to determine the relative amounts of organic mass, which can be attributed to mass produced by heterogeneous acid-catalyzed reactions. Five monoterpenes (α-pinene, terpinolene, d-limonene, Δ²-carene, β-pinene) were studied using a 2 m³ indoor Teflon chamber and SOA was created in the presence of both acidic and neutral inorganic seed aerosol. The relative humidity was varied to create differing acidic seed environments. The heterogeneous aerosol production was influenced by the seed mass concentration, the acidity of the inorganic seed aerosol, and also molecular structure of the monoterpene ozonolysis products. This study also can be incorporated with our previously presented model of the kinetic expression for SOA mass production from heterogeneous acid-catalyzed reactions.     

Low cost sorbents for the removal of methyl parathion pesticide from aqueous solutions

Sorptive potential of selected agricultural waste materials i.e. rice (Oryza sativa) bran (RB), bagasse fly ash (BFA) of sugarcane (Saccharum officinarum), Moringa oleifera pods (MOP) and rice husk (RH) for the removal of methyl parathion pesticide (MP) from surface and ground waters has been investigated. Optimization of operating parameters of sorption process, i.e. sorbent dose, agitation time, pH, initial concentration of sorbate, and temperature have been studied. The sorption data fitted to Freundlich, Langmuir and Dubinin-Radushkevich (D-R) sorption isotherms. The maximum capacities of RB, BFA, MOP and RH for MP were calculated to be 3.6+/-0.8, 5.3+/-1.4, 5.2+/-1.5 and 4.7+/-1.0 mmolg(-1) by Freundlich, 0.39+/-0.009, 0.39+/-0.005, 0.36+/-0.004 and 0.35+/-0.008 mmolg(-1) by Langmuir and 0.9+/-0.08, 1.0+/-0.10, 1.0+/-0.10 and 0.9+/-0.07 mmolg(-1) by D-R isotherms respectively, employing 0.1g of each sorbent, at pH 6, 90 min agitation time and at 303 K. Application of first order Lagergren and Morris-Weber equations to the kinetic data yielded correlation coefficients, close to unity. Thermodynamic parameters of sorption process, i.e. DeltaH, DeltaS and DeltaG were computed and their negative values indicated the exothermic and spontaneous nature of sorption process. The pesticide may be stripped by sonication with methanol, making the regeneration and reutilization of sorbents promising. The sorbents investigated exhibited their potential applications in water decontamination, treatment of industrial and agricultural waste waters.     

诱导结晶法去除地下水中氟离子简

针对现行高氟地下水处理工艺中存在的工艺复杂、运行管理困难等问题,提出采用诱导结晶法除氟。其技术核心是在高氟水中投加氟磷灰石作为晶种,并投加磷酸盐和钙盐使水中氟离子在晶种表面生成氟磷酸钙（Ca₁₀（PO₄） ₆F₂）结晶。通过单因素实验得出最佳工艺条件：投加8g/L氟磷灰石,并投加NaH₂PO₄和CaCl₂,使钙离子、磷酸根离子和氟离子的摩尔比为10：5：1,搅拌速度为100 r/min,反应时间1 h。反应中磷酸根离子和钙离子的利用率分别达到98%和25%以上。电子扫描显微镜（SEM）表征晶种在参与反应后,表面有结晶生成。研究表明,采用诱导结晶法可将水中氟离子浓度从5~10 mg/L降至1 mg/L以下,达到饮用水水质标准。     

A study on the Cr(VI) removal from aqueous solutions by steel wool

The reduction of Cr(VI) by steel wool and the precipitation of reduced chromium by CaCO(3) powder and NaOH solution were investigated in continuous and batch systems, respectively. The effects of acid and initial Cr(VI) concentrations, volumetric rate and temperature of solution on Cr(VI) reduction were studied. The results showed that the reduction of Cr(VI), to a large extent, depended on, and increased with, acid concentration. The Cr(III) and iron ions in the reduced solution were completely precipitated by using NaOH solution at appropriate alkaline conditions. It was concluded that CaCO(3) powder could be used as a cheap precipitant for Cr(III) ions. But the iron ions in the reduced solution could not be fully removed by using this precipitant.     

"磁种-高梯度磁分离"污水除磷技术的研究

通过添加磁种和混凝剂,用高梯度磁分离方法去除污水中正磷酸盐污染物,并对工艺参数进行了探讨.     

Microwave-assisted synthesis of hydroxyapatite for the removal of lead(II) from aqueous solutions

Purpose

This study has the objective to evaluate the lead(II) removal capacity of hydroxyapatite powder synthesized by microwave as an alternative method to decrease production time and cost.

Methods

Hydroxyapatite (HA) was synthesized by a microwave-assisted precipitation method using calcium nitrate and ammonium hydrogen phosphate as calcium and phosphorus sources, respectively. X-ray diffraction and Fourier transform infrared results clearly revealed that the resulting powder was HA with high purity and crystallinity. The obtained powder was used for the removal of lead(II) from aqueous solutions. The effects of pH, amount of adsorbent, initial lead(II) concentration, and contact time were studied in batch experiments.

Results

In the adsorption experiments, maximum lead(II) retention was obtained at pH 6. Adsorption equilibrium was established after 40 min. It was found that the adsorption of lead(II) on HA was correlated well (R ²?=?0.958) with the Freundlich equation for the concentration range studied. Both ion exchange and adsorption process were thought to exist in the removal process.

Conclusions

This study indicates that easily and rapidly synthesized HA by microwave-assisted precipitation method could be used as an efficient adsorbent for removal of lead(II) from aqueous solutions.     

Preparation of hydrothermally solidified materials from waste cathode ray tube panel glass for construction applications

Environmental Science and Pollution Research - Solidification of cathode ray tube (CRT) panel glass was carried out using a hydrothermal processing method. In this way, the glass powder was first...     

A study of silicon carbide synthesis from waste serpentine

There are 60000 tons of serpentine wastes produced in year 2004 in Taiwan. This is due to the well-developed joints in the serpentine ore body as well as the stringent requirements of the particle size and chemical composition of serpentine by iron making company. The waste also creates considerable environmental problems. The purpose of this study is reutilization of waste serpentine to produce a high value silica powder after acid leaching. These siliceous microstructure products obtained from serpentine would be responsible for high reactivity and characteristic molecular sieving effect. In this study, the amorphous silica powder was then synthesized to silicon carbide with the C/SiO(2) molar ratio of 3. The experiment results show that silicon carbide can be synthesized in 1550 degrees C. The formed silicon carbide was whisker beta type SiC which can be used as raw materials for industry.     

In vitro studies of copper release from powder particles in synthetic biological media

The aim of this paper is to provide quantitative data on copper release from powder particles of different copper materials, including artificial copper patina, Cu(2)O and metallic Cu, when exposed to different synthetic biological media to simulate an inhalation scenario and/or skin contact. Generated data may contribute in risk assessment of potential health effects following exposure to and handling of various copper materials. All tests were performed in vitro to determine total copper concentrations, release rates of total copper, and to elucidate its time-dependence. The copper release process was interpreted in terms of specific surface area, surface morphology-, and composition. All powder materials show a time-dependent release process with total copper release rates less than 3 microg/cm(2) per hour at steady state conditions, for all media investigated. The importance of using relevant test media when simulating different interstitial lung conditions and difficulties encountered when comparing powder particles of essentially different properties are thoroughly discussed.     

氧化亚铁硫杆菌浸出线路板中铜的研究

从煤堆积水中分离得到氧化亚铁硫杆菌，利用该菌种对线路板中的铜进行了浸出实验。研究了不同线路板粉末添加量对浸出效果的影响，观察了浸出过程中pH和氧化还原电位（Eh）的变化，结果表明添加量为10g／L和20g／L时，在15d内线路板Cu几乎全部浸出，而50g／L和100g／L在15d内亦有较高的浸出效率，并呈持续上升趋势。     

Bio-beads with immobilized anaerobic bacteria,zero-valent iron,and active carbon for the removal of trichloroethane from groundwater

Chlorinated hydrocarbons are the most common organic pollutants in groundwater systems worldwide. In this study, we developed bio-beads with immobilized anaerobic bacteria, zero-valent iron (ZVI), and activated carbon (AC) powder and evaluated their efficacy in removing 1,1,1-trichloroethane (TCA) from groundwater. Bio-beads were produced by polyvinyl alcohol, alginate, and AC powder. We found that the concentration of AC powder used significantly affected the mechanical properties of immobilized bio-beads and that 1.0 % (w/v) was the optimal concentration. The bio-beads effectively degraded TCA (160 mg L^?1) in the anaerobic medium and could be reused up to six times. The TCA degradation rate of bio-beads was 1.5 and 2.3 times greater, respectively, than ZVI + AC treatment or microbes + AC treatment. Measuring FeS produced by microbial reactions indicated that TCA removal occurred via FeS-catalyzed dechlorination. Analysis of clonal libraries derived from bio-beads demonstrated that the dominant species in the community were Betaproteobacteria and Gammaproteobacteria, which may contribute to the long-term stability of ZVI reactivity during TCA dechlorination. This study shows that the combined use of immobilized anaerobic bacteria, ZVI, and AC in bio-beads is effective and practical for TCA dechlorination and suggests they may be applicable towards developing a groundwater treatment system for the removal of TCA.