UV/H2O2/Fe-FeOxH2x-3和UV/H2O2工艺降解水中富里酸的研究

采用硼氢化钠还原法制备核-壳结构的Fe-FeOxH2x-3复合材料,研究了富里酸在UV/H2O2和UV/H2O2/FeFeOxH2x-3两种不同反应体系下的降解情况.结果表明,核-壳结构Fe-FeOxH2x-3的存在,提高了UV/H2O2降解富里酸的反应速率,TOC去除达到84%.采用XAD树脂吸附法对反应前后的富里酸进行化学分级表征,结果表明,富里酸经反应后憎水酸(HoA)、弱憎水酸(WHoA)和憎水中性物质(HoN)都有所减少,进而转化为亲水性物质(HiM);用超滤膜法对富里酸进行物理分级表征,考察了富里酸在反应前后分子量分布的变化情况.同时,富里酸经过反应后生成的中间产物降低了三氯甲烷生成趋势.     

TiO2/H2O2/UV和TiO2/O3/UV降解对氯苯甲酸和喹啉的试验研究

主要叙述TiO2/H2O2/UV和TiO2/O3/UV体系降解对氯苯甲酸(4-CBA)和喹啉的试验研究.研究表明,(1)在TiO2/H2O2/UV体系里目标物降解速度先随过氧化氢投加量的增加而提高,但超过一定浓度之后便开始下降;(2)在TiO2/O3/UV体系中,目标降解物的反应速度都非常快,且臭氧浓度高的时候降解速度更快;(3)二氧化钛催化剂在TiO2/O3/UV体系中作为积极因素有助于提高反应速率,而在TiO2/H2O2/UV体系是消极因素,会降低反应速率.     

TiO2/H2O2/UV和TiO2/O3/UV降解对氯苯甲酸和喹啉的试验研究

主要叙述TiO2/H2O2/UV和TiO2/O3/UV体系降解对氯苯甲酸（4-CBA）和喹啉的试验研究.研究表明,（1）在TiO2/H2O2/UV体系里目标物降解速度先随过氧化氢投加量的增加而提高,但超过一定浓度之后便开始下降;（2）在TiO2/O3/UV体系中,目标降解物的反应速度都非常快,且臭氧浓度高的时候降解速度更快;（3）二氧化钛催化剂在TiO2/O3/UV体系中作为积极因素有助于提高反应速率,而在TiO2/H2O2/UV体系是消极因素,会降低反应速率.     

Degradation of bisphenol A using UV and UV/H2O2 processes

Bisphenol A (BPA; 4-[2-(4-hydroxyphenyl)propan-2-yl]phenol) is a substance typically used in the plastic industry. It is used in the production of epoxy resins, polycarbonate, or fire retardants or as a stabilizer and an antioxidant in numerous types of plastics. Bisphenol A is introduced into the environment via municipal and industrial wastewater. Because of its hydrophobic properties, BPA has the potential for sorption on activated sludge during the biological wastewater treatment processes. This study investigated the degradation of BPA by means of UV-radiation and in the UV/H2O2 process with the presence and absence of hydrocarbonate ions (HCO3(-)) as hydroxyl radicals (OH*) scavengers. The calculated value of quantum yield was equal to 0.18, and the value of BPA rate constant with hydroxyl radicals was equal to 3.3 x 10(9) M(-1) s(-1).     

UV/H2O2/Fe-FeOxH2x-3和UV/H2O2工艺降解水中富里酸的研究

采用硼氢化钠还原法制备核-壳结构的Fe-FeO_xH_2x-3复合材料，研究了富里酸在UV/H₂O₂和UV/H₂O₂/Fe-FeO_xH_2x-3两种不同反应体系下的降解情况。结果表明，核-壳结构Fe-FeO_xH_2x-3的存在，提高了UV/H₂O₂降解富里酸的反应速率，TOC去除达到84%。采用XAD树脂吸附法对反应前后的富里酸进行化学分级表征，结果表明，富里酸经反应后憎水酸（HoA）、弱憎水酸（WHoA）和憎水中性物质（HoN）都有所减少，进而转化为亲水性物质（HiM）；用超滤膜法对富里酸进行物理分级表征，考察了富里酸在反应前后分子量分布的变化情况。同时，富里酸经过反应后生成的中间产物降低了三氯甲烷生成趋势。     

UV/草酸铁/H2O2法处理乙草胺废水的研究

对UV/草酸铁/H2O2法处理乙草胺废水进行研究,考察了H2O2浓度、FeSO4浓度、K2C2O4浓度、pH值及反应时间对乙草胺去除效果的影响.结果表明,当H2O2/FeSO4/K2C2O4(化学剂量数比)=5051,H2O2/乙草胺初始COD(质量浓度比)=31时,该技术对乙草胺的去除率可达85%以上.这表明,采用UV/草酸铁/H2O2法可以有效地处理含乙草胺废水.     

UV/H2O2工艺降解环丙沙星的研究

采用UV/H2O2工艺去除水体中的喹诺酮类抗生素环丙沙星（CIP）。考察了溶液pH值、H2O2投加量以及水体基质对环丙沙星降解效率的影响,分析了降解产物的生成情况。研究表明,环丙沙星的降解符合拟一级反应动力学模型。降解速率受溶液pH值的影响,酸性及中性条件,有利于环丙沙星的降解。H2O2投加量的增大,使得降解速率逐渐增大,但速率增幅逐渐变缓;最佳H2O2/环丙沙星摩尔比为2 000。实际水体中存在的NOM、NO3-,促进了单独UV作用下,环丙沙星的降解。水体中的.OH焠灭剂,抑制了UV/H2O2联合作用下,环丙沙星的降解;实际水体中的光解速率常数低于超纯水中的光解速率常数。GC-MS分析表明,UV/H2O2工艺,使环丙沙星氧化降解生成氨基乙酸、丙二酸、丙三醇和对苯二甲酸等小分子有机物。     

UV/H2O2/草酸铁络合物光降解邻苯二甲酸二丁酯研究

研究了邻苯二甲酸二丁酯(DBP)在UV/H2O2/草酸铁络合物体系中的光降解.结果表明,UV/H2O2/草酸铁络合物能有效地光解DBP;在pH值为4时,DBP光解速率最快,中性和碱性条件下光解效率降低;DBP的光解速率随H2O2浓度的升高而增大,但H2O2浓度较大时,其对·OH的清除作用使DBP的光解速率减慢;[Fe3 ]/[C2O42]＜1/10,DBP光解速率随Fe3 浓度增大明显提高,[Fe3 ]/[C2O42]＞1/10时,引起DBP光解速率的增加不明显.     

UV/H2O2工艺降解环丙沙星的研究

采用UV/₂O₂工艺去除水体中的喹诺酮类抗生素环丙沙星（CIP）。考察了溶液pH值、₂O₂投加量以及水体基质对环丙沙星降解效率的影响,分析了降解产物的生成情况。研究表明,环丙沙星的降解符合拟一级反应动力学模型。降解速率受溶液pH值的影响,酸性及中性条件,有利于环丙沙星的降解。₂O₂投加量的增大,使得降解速率逐渐增大,但速率增幅逐渐变缓;最佳₂O₂/环丙沙星摩尔比为2 000。实际水体中存在的NOM、NO^-₃,促进了单独UV作用下,环丙沙星的降解。水体中的?OH焠灭剂,抑制了UV/₂O₂联合作用下,环丙沙星的降解;实际水体中的光解速率常数低于超纯水中的光解速率常数。GC-MS分析表明,UV/₂O₂工艺,使环丙沙星氧化降解生成氨基乙酸、丙二酸、丙三醇和对苯二甲酸等小分子有机物。     

一种光催化体系光催化降解苯胺的研究

以钛酸丁酯为原料．以膨润土为载体,用酸性溶胶法合成TiO2纳米复合物,并利用该复合物作催化剂,在H2O2存在下进行光催化降解苯胺溶液。结果表明,该催化剂在UV／H2O2系统中对苯胺溶液有很好的光催化降解效果,其效果优于纯TiO2;H2O2的存在提高了苯胺光催化降解速率,在本实验条件下其最佳摩尔浓度是5mmol／L;溶液pH是影响反应速率的重要因素．pH在中性范围内具有更强的光催化活性;该体系中苯胺能够有效地被降解,其光催化反应遵循一级反应动力学规律。     

Degradation mechanism of ammonia nitrogen synergistic with bromate under UV or UV/TiO2

Environmental Science and Pollution Research - Bromate (BrO3?) and ammonia nitrogen (NH4+) are both typical environmental pollutants: BrO3? has been categorized as one of the Group 2B...     

Oxidation of MCPA and 2,4-D by UV radiation, ozone, and the combinations UV/H2O2 and O3/H2O2

The phenoxyalkyl acid derivative herbicides MCPA (4-chloro 2-methylphenoxyacetic acid) and 2,4-D (2,4-dichlorophenoxyacetic acid) were oxidized in ultrapure water by means of a monochromatic UV irradiation and by ozone, as well as by the combinations UV/H2O2 and O3/H2O2. In the direct photolysis of MCPA, the quantum yield at 20 degrees C was directly evaluated and a value of 0.150 mol Eins(-1) was obtained in the pH range 5-9, while a lower value of 0.41 x 10(-2) mol Eins(-1) was determined at pH=3. Similarly, for 2,4-D a value of 0.81 x 10(-2) mol Eins(-1) was deduced, independent of the pH of work. The influence of the additional presence of hydrogen peroxide was established in the combined process UV/H2O2, and the specific contribution of the radical pathway to the global photo-degradation was evaluated. The oxidation by ozone and by the combination O3/H2O2 was also studied, with the determination of the rate constants for the reactions of both herbicides with ozone and hydroxyl radicals at 20 degrees C. These rate constants for the direct reactions with ozone were 47.7 and 21.9 M(-1) s(-1) for MCPA and 2,4-D respectively, while the found values for the rate constants corresponding to the radical reactions were 6.6 x 10(9) and 5.1 x 10(9) M(-1) s(-1).     

Comparative study of the oxidation of atrazine and acetone by H2O2/UV, Fe(III)/UV, Fe(iii)/H2O2/UV and Fe(II) or Fe(III)/H2O2

In this study, the rates of degradation of organic compounds by several AOPs (H₂O₂/UV, Fe(III)/UV, Fe(III)/H₂O₂/UV, Fe(II)/H₂O₂ and Fe(III)/H₂O₂) have been compared. Experiments were carried out at pH ≈ 3 (perchloric acid / sodium perchlorate solutions) and with UV reactors equipped with a low-pressure mercury vapour lamp (emission at 253.7 run). The data obtained with atrazine ([Atrazine]_o = 100 μg/L) showed that the rate of degradation of atrazine in very dilute aqueous solution is much more rapid with Fe(III)/UV than with H₂O₂/UV. Photo-Fenton process (Fe(III)/H₂O₂/UV) was found to be more efficient than H₂O₂/UV and Fe(II)/H₂O₂ for the mineralization of acetone ([Acetone]_o = 1 mM).     

Photochemical degradation of atrazine in UV and UV/H2O2 process: pathways and toxic effects of products

The degradation of atrazine in aqueous solution by UV or UV/H₂O₂ processes, and the toxic effects of the degradation products were explored. The mineralization of atrazine was not observed in the UV irradiation process, resulting in the production of hydroxyatrazine (OIET) as the final product. In the UV/H₂O₂ process, the final product was ammeline (OAAT), which was obtained by two different pathways of reaction: dechlorination followed by hydroxylation, and the de-alkylation of atrazine. The by-products of the reaction of dechlorination followed by hydroxylation were OIET and hydroxydeethyl atrazine (OIAT), and those of de-alkylation were deisopropyl atrazine (CEAT), deethyl atrazine (CIAT), and deethyldeisopropyl atrazine (CAAT). OIAT and OAAT appeared to be quite stable in the degradation of atrazine by the UV/H₂O₂ process. In a toxicity test using Daphnia magna, the acute toxic unit (TUa) was less than 1 of TUa (100/EC₅₀, %) in the UV/H₂O₂ process after 30 min of reaction time, while 1.2 to 1.3 of TUa was observed in the UV process. The TUa values of atrazine and the degradation products have the following decreasing order: OIET> Atrazine> CEAT≈CIAT> CAAT. OIAT and OAAT did not show any toxic effects.     

Photochemical degradation of ciprofloxacin in UV and UV/H2O2 process: kinetics, parameters, and products

Photochemical degradation of fluoroquinolone ciprofloxacin (CIP) in water by UV and UV/H₂O₂ were investigated. The degradation rate of CIP was affected by pH, H₂O₂ dosage, as well as the presence of other inorganic components. The optimized pH value and H₂O₂ concentration were 7.0 and 5 mM. Carbonate and nitrate both impeded CIP degradation. According to liquid chromatography–tandem mass spectrometry analysis, four and 16 products were identified in UV and UV/H₂O₂ system, respectively. Proposed degradation pathways suggest that reactions including the piperazinyl substituent, quinolone moiety, and cyclopropyl group lead to the photochemical degradation of CIP. Toxicity of products assessed by Vibrio qinghaiensis demonstrated that UV/H₂O₂ process was more capable on controlling the toxicity of intermediates in CIP degradation than UV process.     

Comparative studies of the Fe–UV, H2O2–UV, TiO2–UV/vis systems for the decolorization of a textile dye X-3B in water

The degradation of a common textile dye, Reactive-brilliant red X-3B, by several advanced oxidation technologies was studied in an air-saturated aqueous solution. The dye was resistant to the UV illumination (wavelength λ  320 nm), but was decolorized when one of Fe³⁺, H₂O₂ and TiO₂ components was present. The decolorization rate was observed to be quite different for each system, and the relative order evaluated under comparable conditions followed the order of Fe²⁺–H₂O₂–UV  Fe²⁺–H₂O₂ > Fe³⁺–H₂O₂–UV > Fe³⁺–H₂O₂ > Fe³⁺–TiO₂–UV > TiO₂–UV > Fe³⁺–UV > TiO₂–visible light (λ  450 nm) > H₂O₂–UV > Fe²⁺–UV. The mechanism for each process is discussed, and linked together for understanding the observed differences in reactivity.     

臭氧与TiO2/UV协同降解对氯苯酚

利用O3／UV、TiO2／UV和O3／TiO2／UV降解对氯苯酚表明，臭氧与TiO2／UV具有明显的协同作用，如在本实验条件下降解5min后，上述3者对对氯苯酚的去除率分别为55％、10％和77%。O3／TiO2／UV协同作用的本质是由于臭氧能带走二氧化钛光致电子空穴对中的电子，从而产生了更多的羟基自由基，加速了有机物的降解。     

O3/H2O2/UV降解1,2,4-三氯苯的研究

采用O3/H2O2/UV工艺处理1,2,4-三氯苯(TCB)模拟废水,考察了TCB初始浓度、pH、H2O2投加量及O3转化率等因素对O3/H2O2/UV降解TCB的影响,推断了TCB可能的降解途径。结果表明:(1)H2O2、O3、UV、O3/H2O2、O3/H2O2/UV 5种体系对TCB的降解效果为H2O2相似文献   

VUV/UV/Cl2工艺去除饮用水中的乐果

乐果是常规饮用水处理技术难以去除的一种典型有机磷农药。为了能够控制并去除饮用水中的农药残留,达到进一步净化水质的目的,建立了降解动力学模型,采用模拟降解饮用水中乐果的方法,对比了乐果在紫外(UV)、氯(Cl2)、紫外/氯(UV/Cl2)、真空紫外/紫外(VUV/UV)和真空紫外/紫外/氯(VUV/UV/Cl2)5种工艺下的去除效果,并考察了乐果初始浓度、Cl2投加量、溶液p H、水中共存天然有机物(NOM)和无机阴离子(N O_3~-、Cl-、HCO_3~-、SO_4~(2-))对VUV/UV/Cl2工艺降解乐果的影响。结果表明:VUV/UV/Cl2对乐果的降解效率最高,乐果的去除率随其初始浓度的增加而减小;适当增加Cl2投加量,可提高乐果的降解效率;提高p H有利于乐果的降解;NOM对乐果的降解有一定的抑制作用;水中共存无机阴离子NO_3~-、Cl-和HCO_3~-可以捕获反应体系中的强氧化性羟基自由基(HO·),对乐果的降解起到抑制作用,而SO_4~(2-)因其捕获HO·的速率很低,无抑制作用。