Phanerochaete chrysosporium吸附载体的选择及染料降解研究

研究了游离细胞与载体吸附培养、不同载体材料对Phanerochaete chrysosporium进行连续染料脱色及产酶能力的影响。结果表明,P. chrysosporium可在载体上良好生长,甚至生长到载体内部。木屑、玉米芯、花生壳3种载体材料中,以木屑载体吸附培养物的持续脱色和产酶效果最佳,该培养物经三轮连续脱色后对染料RB5仍能达到最高95%的脱色率,并产生596 U/L锰依赖过氧化物酶（MnP）和1 326 U/L木质素过氧化物酶（LiP）,对染料的持续脱色和产酶能力明显优于游离细胞培养物。     

Decolorization of synthetic dyes by the Fenton reagent and the Cu/pyridine/H2O2 system

Representative azo, triphenylmethane, heterocyclic and polymeric synthetic dyes have been decolorized by two biological non-ezymatic systems, copper/pyridine/H2O2 and the Fenton reagent. With the former system, intensive decolorization measured after 1 h was obtained with phenol red (89%), tropaeolin 00 (58%), Evans blue (95%), eosin yellowish (84%), and Poly B-411 (92%). The rate of decolorization was not affected by pH in the range of 3-9 and increased with increasing temperature. The use of the radical scavengers thiourea and superoxide dismutase showed that hydroxyl radicals rather than superoxide anions are involved in the reaction. Omission of pyridine led to a substantial decrease in the extent of decolorization (20-50% decolorization). The use of organic peroxide instead of H2O2 resulted in slightly slower decolorization, similar values of decolorization being obtained only after a 2-h incubation. Decolorization of the dyes by the Fenton reagent was also very effective but slower than that obtained with the first system. Except for phenol red and eosin yellowish, (decolorization 8% and 52%, respectively) the dyes were decolorized up to 99% after 1-day incubation.     

染料废水处理技术的研究与进展

概述了含染料废水处理方法的研究现状和最新进展 ,尤其是在物化法 (包括辐射法、吸附 萃取法、磁分离法、混凝沉降法和氧化法 )、生物法 (好氧 厌氧氧化 -还原序列反应器、固定化微生物降解、膜生物反应器 )及生物 -物化联合法 (生物吸附剂、生物活性炭、厌氧折流板反应池 -生物接触氧化池 -混凝沉淀 -砂滤池处理工艺、水解酸化 -接触氧化法等 )中的新技术的研究现状 ,新方法、材料、工艺的应用方面 ,对提高此类废水的处理效果有重要的理论和实际意义     

TiO2／SiO2催化剂可见光降解偶氮染料的研究

以多孔硅胶作载体.通过酸性溶胶法制备了TiO2/SiO2催化剂.采用X射线衍射(XRD)、热重一差热分析(TG-DTA)、扫描电镜(SEM)和BET等方法对该催化剂进行了表征.以偶氮染料酸性橙7(A07)的可见光降解作为探针反应,研究了TiO2/SiO2的催化活性.结果表明,TiO2的平均晶粒尺寸为5.1 nm,晶型为锐钛矿;TiO2/SiO2具有大的比表面积,比P-25催化剂具有更高的光催化活性和更好的沉降性能,便于回收利用.     

Electrochemical removal of synthetic textile dyes from aqueous solutions using Ti/Pt anode: role of dye structure

In this work, the efficiency of electrochemical oxidation (EO) was investigated for removing a dye mixture containing Novacron Yellow (NY) and Remazol Red (RR) in aqueous solutions using platinum supported on titanium (Ti/Pt) as anode. Different current densities (20, 40 and 60 mA cm^?2) and temperatures (25, 40 and 60 °C) were studied during electrochemical treatment. After that, the EO of each of these dyes was separately investigated. The EO of each of these dyes was performed, varying only the current density and keeping the same temperature (25 °C). The elimination of colour was monitored by UV-visible spectroscopy, and the degradation of organic compounds was analysed by means of chemical oxygen demand (COD). Data obtained from the analysis of the dye mixture showed that the EO process was effective in colour removal, in which more than 90 % was removed. In the case of COD removal, the application of a current density greater than 40 mA cm^?2 favoured the oxygen evolution reaction, and no complete oxidation was achieved. Regarding the analysis of individual anodic oxidation dyes, it was appreciated that the data for the NY were very close to the results obtained for the oxidation of the dye mixture while the RR dye achieved higher colour removal but lower COD elimination. These results suggest that the oxidation efficiency is dependent on the nature of the organic molecule, and it was confirmed by the intermediates identified. Figure

Chemical structures of a NY and b RR     

Electrochemical decolourisation of structurally different dyes

The electrochemical decolourisation of structurally different dyes (bromophenol blue, indigo, poly R-478, phenol red, methyl orange, fuchsin, methyl green and crystal violet) by means of the application of DC electric current was assessed. It was found that the electrochemical process allowed a colour removal of all dyes studied, although the decolourisation rate largely depended on the chemical structure of the different dyes. Nearly complete decolourisation was achieved for bromophenol blue followed by methyl orange and methyl green, whereas phenol red was hardly decolourised (30% in 60 min). In mixtures of two dyes, the decolourisation rate became similar for both dyes. However, the addition of a redox mediator, (Co(2+/3+)) clearly enhanced the degradation rate of all tested dyes, but the simplest dye molecules were attacked firstly, followed by dyes with more complex chemical structures. The results revealed the suitability of the process to effectively decolourise wastewaters from dyeing process.     

实用型深度光氧化设备对几种染料和多菌灵农药废水的处理

利用HFS 1型深度光氧化废水处理设备对活性艳蓝K3R、酸性红 3B、活性黑KNB、酸性红A、直接耐酸大红4BS等 5种染料的水溶液和多菌灵农药废水进行了深度光氧化处理。结果表明 :(1)染料在处理 5min后 ,脱色率都在 90 %以上 ;处理 15min后 ,CODCr的去除率除活性艳蓝K3R较低外 ,其余的都在 80 %以上 ;BOD5/CODCr的值都有所增大。 (2 )多菌灵农药废水 (经稀释 )处理 4 0min后CODCr的去除率为 5 7.0 % ,BOD5/CODCr的值由 0 .2 0增加到 0 .4 4。 (3)采用深度光氧化 -絮凝的工艺处理多菌灵农药废水 ,CODCr的去除率为 5 7.5 %。     

Decolorization of structurally different synthetic dyes using cobalt(II)/ascorbic acid/hydrogen peroxide system

The cobalt(II)/ascorbic acid/hydrogen peroxide system was used for decolorization of azo, acridine, anthraquinone, thiazine and triphenylmethane dyes. More than 90% decolorization was obtained with all dyes except Remazol Brilliant Blue R (75%). With other transition metals the system was less efficient. With copper, higher concentration and prolonged incubation time was necessary to obtain the same extent of decolorization. The rate of decolorizaton was not affected by pH in the range of 3-9. The reaction is very fast, with more than 90% decolorization being attained within 15 min. The system produces hydroxyl radicals which are responsible for the decolorization.     

Decolorization and degradation of H-acid and other dyes using ferrous-hydrogen peroxide system

In this study, advanced oxidation process utilizing Fenton's reaction was investigated for the decolorization and degradation of two commercial dyes viz., Red M5B, Blue MR and H-acid, a dye intermediate used in chemical industries for the synthesis of direct, reactive and azo dyes. Effect of Fe2 +, H2O2, pH, and contact time on the degradation of the dyes was studied. Maximum color and COD removal was obtained for Red MSB, H-acid and Blue MR at 10-25 mg/l of Fe2+ dose and 400-500 mg/l of H2O2 dose at pH 3.0. The initial oxidation reaction was found to fit into first order rate kinetics and the rate of oxidation of H-acid was higher than the other dyes. Release of chloride and sulfate from the Fenton's treated Red M5B dye and sulfate from H-acid and Blue MR indicates that the dye degradation proceeds through cleavage of the substituent group.     

污泥吸附剂对3种染料吸附动力学的研究

以污水厂脱水污泥、锯末和焦油的混合物为原料,选择ZnCl₂为活化剂制备出过渡孔发达、强度大的污泥吸附剂（S-AC）。借助BET、FT-IR等现代分析测试方法对污泥吸附剂进行表征,同时,研究了吸附剂对酸性大红、中性红和碱性品红吸附动力学行为。结果表明,制得的污泥吸附剂BET比表面积为358 m²/g,强度大于89%。吸附剂的动力学数据均符合伪二阶动力学方程、液膜扩散方程和颗粒内扩散方程,其中液膜扩散为吸附剂对酸性大红吸附过程的主控步骤,颗粒内扩散为吸附剂对中性红和碱性品红吸附过程的主控步骤。     

Physical properties of PVDF-GO/black-TiO2 nanofibers and its photocatalytic degradation of methylene blue and malachite green dyes

Environmental Science and Pollution Research - Black TiO2 and graphene oxide (GO) have attracted intensive attention as an effective catalyst on visible light driven for photodegrading of dyes. In...     

Ferric citrate-induced photodegradation of dyes in aqueous solutions

The photooxidation of dye solutions containing Fe(III)-citrate complexes was studied. The photodegradation under near-UV light of the five dyes, C. I. reactive red 2, C. I. reactive blue 4, C. I. reactive black 8, C. I. basic red 13 and C. I. basic yellow 2, in aqueous solutions at pH2.0 containing Fe(III)-citrate complexes was found to follow pseudo-first order kinetics. The photodegradation rates of the dye, C. I. reactive red 2, decreased with increasing the initial dye concentration in range of 20 – 60 mg/L . A comparatively higher photodegradation efficiency of the dye was gained under the condition of pH2.0 and the Fe(III) to citrate ratio 1:2.     

3种染料化合物在UV-TiO2/H2O2和UV-TiO2体系中的光催化降解研究

采用自制的TiO2膜和平板式固定床型光催化氧化反应装置,对甲基橙、茜素红和罗丹明B 3种含有不同生色基团的染料化合物进行了TiO2光催化氧化降解研究,通过对照测定降解过程中吸光度、电导率、pH的变化,分析了在加入和不加入H2O22种情况下降解过程的异同,比较了3种染料化合物脱色的难易程度,揭示了降解产物中无机离子的变化规律及某些可能的产物类型.     

氯甲烷与偶氮染料混合废水的超声脱色

使用40 kHz超声(US)脱色氯甲烷(包括CCl4、CHCl3和CH2Cl2)与偶氮染料(包括甲基橙与铬黑T)混合模拟废水,考察了氯甲烷初始浓度对偶氮染料超声脱色和TOC去除的影响.结果表明:偶氮染料的单独超声脱色速率很慢;而在CCl4与CHCl3存在时超声能使偶氮染料短时间内脱色至无色,但对其TOC的超声去除促进作...     

新生态MnO2吸附剂对酸性媒介染料废水脱色特性研究

本文主要报道了一种用于染料废水处理的新型材料即新生态MnO2 及其对三种酸性媒介染料染色废水的脱色作用及影响脱色效果的主要因素。研究结果表明 ,新生态MnO2 对酸性媒介染料的吸附能力很强 ,当染料浓度为2 0 0mg/L、pH <2时 ,其对酸性媒介黑T、酸性媒介绿G和酸性媒介黄GG的脱色率分别达 98.2 %、94.5 %和 96 .4%。染料吸附效果受体系pH值、MnO2 投加量、吸附时间及温度等因素的影响 ,其中pH值是最主要的影响因素。新生态MnO2 对酸性媒介黄GG的吸附作用符合Langmuir吸附等温式     

Degradation of dyes in aqueous solutions by the Fenton process

Degradation of 20 different dyes in aqueous solutions by the Fenton process was performed. These dyes include 6 types: acidic, reactive, direct, cationic, disperse and vat dyes. The former four types of dyes were decolorized and their TOC values were decreased greatly, while the color and TOC removals of the latter two types were lower. The catalytic activities of four metal ions on the degradation efficiencies of Vat Blue BO, which was chosen as a model dye because of its lowest color and TOC removals, were compared in the dark and under the ultraviolet light irradiation. The catalytic ability of different metals was Fe2+>Cu2+>Mn2+>Ag+ in the dark, and the same sequence was obtained under irradiation condition with greater degradation efficiency. Furthermore, the efficiencies of three oxidation processes, including H2O2/UV, Fe2+/H2O2 and Fe2+/H2O2/UV were compared. The results showed that the oxidation by Fe2+/H2O2/UV was the strongest, and even greater than the arithmetic sum of the other two processes, which suggests the synergistic effect of ultraviolet and ferrous ions on the degradation reaction.     

Quantum yield study of the photodegradation of hydrophobic dyes in the presence of acetone sensitizer.

The photodegradation of hydrophobic disperse dyes with different chromophores in the presence of acetone (ACE) was investigated. In this study, the photodecay of dyes was carried out in the Rayonet RPR-200 merry-go-round photoreactor, with 253.7 nm monochromatic ultraviolet (UV) lamps. A typical azo disperse dye (CI disperse yellow 7--DY7) and an anthraquinone disperse dye (CI disperse orange--DO11) were used as the probe compounds. The results demonstrate that the addition of acetone increases the solubility of hydrophobic disperse dyes and enhances the photosensitization reaction simultaneously. More than ten times of quantum yield enhancement is observed in the presence of ACE photosensitizer than in water alone. The photodegradation of DY7 and DO11 is dominated by photoreduction, which follows pseudo first-order decay, and the rate constants strongly depend on the solvent system (i.e., ACE/H2O ratios) and the initial pH levels. The decay quantum yields of dyes are normally observed with the increase of the ACE/H2O ratio. The optimum quantum yields of DY7 and DO11 were determined at 0.5 (v/v) and 0.25 (v/v), respectively, in alkaline conditions. A further increase in the ACE/H2O ratio reduces the quantum yields, possibly due to light attenuation by excess acetone.     

Photocatalytic and combined anaerobic-photocatalytic treatment of textile dyes

A photocatalytic process based on immobilized titanium dioxide was used to treat crude solutions of azo, anthraquinone and phthalocyanine textile dyes. In addition, the process was applied to the treat autoxidized chemically reduced azo dyes, i.e. representatives of recalcitrant dye residues after biological sequential anaerobic-aerobic treatment. Photocatalysis was able to remove more than 90% color from crude as well as autoxidized chemically reduced dye solutions. UV-absorbance and COD were also removed but to a lower extent (50% in average). The end products of photocatalytic treatment were not toxic toward methanogenic bacteria. The results demonstrate that photocatalysis can be used as a pre- or post-treatment method to biological anaerobic treatment of dye-containing textile wastewater.     

盐泥吸附剂对直接染料的平衡吸附行为和热力学性质研究

以染料废水处理用盐泥吸附剂的开发为目的,在静态吸附条件下,研究了含镁盐泥对直接大红、直接深蓝和直接黑3种直接染料的吸附行为,并对吸附过程的热力学进行了分析。结果表明,吸附平衡数据都能够较好地符合Langmuir和Freundlich吸附等温方程,但Langmuir方程能够更好地描述吸附等温线。在25～30℃范围内,3种直接染料在盐泥上的吸附是一个吸热过程,同时伴随着熵值的增加,反应的吉布斯自由能变小。吸附是物理和化学吸附并存的吸附过程,主要推动力为化学键力（化学吸附）,同时可能存在范德华力（物理吸附）,吸附焓变在74120～87332 kJ/mol之间。     

高铁酸盐对活性及分散染料的脱色研究

采用湿法制备了高铁酸钾(K₂FeO₄)氧化剂,研究了其对染料活性艳红X-3B(X-3B) 和分散蓝2BLN(2BLN)在不同pH条件下的脱色效果,并对Al₂ (SO₄)₃、K₂FeO₄及O₃对活性及分散染料的脱色效果进行了比较。结果表明：高铁酸钾对活性及分散染料的脱色效果明显, X-3B脱色率随pH的增加不断提高,2BLN脱色率在pH 6～10范围内无明显变化,在pH＝5时达到最大值。在X-3B及2BLN浓度同为100 mg／L,pH分别为10、5, K₂FeO₄浓度分别为100 mg／L和200 mg／L时,BLN及X-3B的脱色率分别达到92.3％和87.3％。在相同条件下,K₂FeO₄对活性艳红X-3B的脱色效果好于Al₂(SO₄)₃和O₃; 而K₂FeO₄对分散蓝2BLN的脱色效果虽比Al₂ (SO₄)₃稍差,但比臭氧的脱色效果要好。同时还研究了K₂FeO₄对活性及分散染料的脱色机理,结果表明： 高铁酸钾对X-3B的脱色依赖于K₂FeO₄的氧化作用,而对的2BLN的脱色则以絮凝为主。