Agroforestry associating coffee and Inga densiflora results in complementarity for water uptake and decreases deep drainage in Costa Rica

The shade impact by Inga densiflora on water use and drainage in a coffee agroforestry system (AFS) was compared to coffee monoculture (MC) in Costa Rica. Rainfall interception, transpiration, runoff and soil water content were monitored during 3 years. Runoff was lower in AFS than MC (5.4 and 8.4% of total rainfall, respectively) and a higher water infiltration was observed under AFS. Still, the higher combined rainfall interception + transpiration of coffee and shade trees in AFS resulted in a lower drainage than in MC. No coffee water stress was recorded either in AFS or MC as relative extractable soil water remained above 20% during the dry seasons. Time course of soil water content showed enhanced access to soil water between 100 and 200 cm depth in AFS. This suggests complementarity for soil water between coffee and shade trees. The model HYDRUS 1D predicted that drainage at 200 cm depth accounted for a large fraction of annual rainfall (68% for MC and 62% for AFS). Climatic scenario simulations showed (1) a potential competition for water between coffee and shade trees when the dry season was extended by 4–6 weeks compared to actual, and (2) a severe reduction in annual drainage, but without competition for water when rainfall was reduced down to 40% of the actual.     

Copper slag: optimization of productivity and consumption for cleaner production in dry abrasive blasting

Copper slag, a by-product from copper smelting industry, is widely used as an abrasive material to remove rust, old coating and other contamination in dry abrasive blasting which is an expensive process and results in significant amounts of particulate emissions and spent abrasive. This paper presents models developed to improve productivity and consumption of copper slag as functions of blast pressure, abrasive feed rate, and surface contamination. These models will help industries in selecting optimum process conditions for maximum efficiency and to achieve cleaner production by consuming less materials and energy resources. In addition, the models will greatly assist in evaluation of the life cycle costs for use of copper slag in dry abrasive blasting.     

Public perception, knowledge and policy support for mitigation and adaption to Climate Change in Costa Rica: Comparisons with North American and European studies

Over the past 20 years considerable efforts have been invested in exploring how the public understands climate change. However, the bulk of this research has been conducted in Europe and North America and little is known about public perceptions of climate change in developing countries. This article presents the results of the first nationally representative study (n?=?1473) of public perceptions of climate change in Costa Rica. In Costa Rica, a large proportion of interviewees (i.e. over 85%) are highly concerned about climate change in general and feel, as noted in European and North American studies, that its impacts are more worrisome for people farthest away (e.g. in the developed countries or among future generations). At the local level, people feel that food (10.5%) and water (16.1%) shortages as well as poverty (11.3%) and heat waves (11.7%) are the most expected impacts of climate change. Analysis of adaptation behaviour responses suggest that individuals have a relatively lower grasp of emergency and prevention disaster plans but are relatively more proactive in preventing hydro-meteorological extremes related to water scarcity or excess. A majority of respondents engage in mitigation behaviours largely for financial or contextual reasons. Finally, support for adaptation and mitigation policy responses is generally high (i.e. above 70% of interviewee supports them) except for the case of internalizing the cost of watershed protection increasing the water tariffs (52.5%). As discussions about mitigation and adaptation become increasingly common within developing countries, questions about public perceptions in that context are more pressing than ever. Work on climate perceptions needs to be carried out in specific countries to better understand which policies are most likely to resonate with public support, and which might be most difficult to implement.     

Soil fungistasis and its relations to soil microbial composition and diversity: a case study of a series of soils with different fungistasis

Fungistasis is one of the important approaches to control soil-borne plant pathogens.Some hypotheses about the mechanisms for soil fungistasis had been established,which mainly focused on the soil bacterial community composition,structure,diversity as well as function.In this study,the bacterial community composition and diversity of a series of soils treated by autoclaving,which coming from the same original soil sample and showing gradient fungistasis to the target soil-borne pathogen fungi Fusarium gr...     

Life-cycle inventory for hydroelectric generation: a Brazilian case study

Representative Life-Cycle Inventories (LCIs) are essential for Life-Cycle Assessments (LCAs) quality and readiness. Because energy is such an important element of LCAs, appropriate LCIs on energy are crucial, and due to the prevalence of hydropower on Brazilian electricity mix, the frequently used LCIs are not representative of the Brazilian conditions. The present study developed a LCI of the Itaipu Hydropower Plant, the major hydropower plant in the world, responsible for producing 23.8% of Brazil's electricity consumption. Focused on the capital investments to construct and operate the dam, the LCI was designed to serve as a database for the LCAs of Brazilian hydroelectricity production. The life-cycle boundaries encompass the construction and operation of the dam, as well as the life-cycles of the most important material and energy consumptions (cement, steel, copper, diesel oil, lubricant oil), as well as construction site operation, emissions from reservoir flooding, material and workers transportation, and earthworks. As a result, besides the presented inventory, it was possible to determine the following processes, and respective environmental burdens as the most important life-cycle hotspots: reservoir filling (CO₂ and CH₄ emission; land use); steel life-cycle (water and energy consumption; CO, particulates, SO_x and NO_x emissions); cement life-cycle (water and energy consumption; CO₂ and particulate emissions); and operation of civil construction machines (diesel consumption; NO_x emissions). Compared with another hydropower studies, the LCI showed magnitude adequacy, with better results than small hydropower, which reveals a scale economy for material and energy exchanges in the case of Itaipu Power Plant.     

Proposal for new quantitative eco-design indicators: a first case study

Eco-design is a valuable approach in order to reduce the environmental impact associated with a product system, by introducing environmental considerations early on in its design. Different strategies are possible for the implementation of eco-design, depending on the intended goals as well as the characteristics of the products. The present work proposes a series of eco-design indicators and tests to what extent the application of these simple indicators provides a reliable indication of the reduction of environmental impact, as measured by commonly employed Life Cycle Impact Assessment (LCIA) indicators. The product chosen for the case study was a water source heat pump. Two of the newly-developed indicators were applied and compared to LCIA indicators, focussing on design for disassembly and for recycling. A good and robust correlation was found, providing support to the thesis that these simple eco-design indicators can be used as a proxy to quickly and effectively gauge the environmental improvements introduced in a product system at the design stage.     

Groundwater models and wellfield management: a case study

The highly permeable sand and gravel of the Little Miami River Valley Aquifer System near Milford, Ohio provide the community with a high-yielding source of drinking water. While this hydrogeologic setting is ideal from a water quantity standpoint, it is greatly vulnerable to contamination. The future viability of the well-field came into question when it was discovered that the wellfield was contaminated with volatile organic contaminants, leaving the City with the costly cleanup. Milford’s perseverance is also challenged by having to deal with a deteriorating treatment plant. Furthermore, larger water suppliers in the area have threatened the community’s independence. The question facing this community, and many other smaller communities, was whether to surrender its independence or invest in their future. The city has decided to keep their wellfield and to conduct a groundwater study. The objectives of the study were to: (a) collect and evaluate hydrogeological data; (b) develop a conceptual model of the groundwater system; (c) construct groundwater flow and geochemical models; (d) delineate wellhead protection area; and (e) develop a comprehensive management program. Collected hydro-geologic data served as a basis for the conceptual model. The U.S. Geological Survey (USGS) three-dimensional groundwater flow model MODFLOW was used in conjunction with MODPATH, a particle-tracking program, to identify travel times and paths of contaminants. This approach ultimately lead to the delineation of the wellhead protection area (WHPA). Geochemical mixing models were constructed using the USGS PHREEQC to verify the flow model results. The use of both flow and geochemical models to delineate the WHPA and to manage groundwater resources is a unique approach. The modeling results provide the City of Milford a management tool in making difficult policy decisions regarding future land use, siting for new monitoring and production wells, and identification of potential pollution sources.     

EKC analysis for studying economic growth and environmental quality: a case study in China

Compared with the extensive research on the relationship between economic growth and environmental quality in developed countries, there is a paucity of an empirical research on studying the relation for developing countries. Based upon the Environmental Kuznets Curve (EKC) theory, this paper develops regression models for investigating the relationship between economic growth and environmental quality in China. The EKC analysis based on six pollution indices is illustrated with a case study in Jiaxing of Zhejiang, China.     

Challenges and opportunities for sustainability in regional universities: a case study in Mytilene,Greece

Regional Higher Education Institutions (HEIs) may contribute significantly to the promotion of sustainability through several means connected with their functioning. Nevertheless, several challenges can present themselves during the planning and implementation of such initiatives. The aim of this paper is to underline these limitations through the relevant literature and highlight their main consequences on the achievement of sustainability. An empirical study, investigating the perception of students regarding the constraints to achieving sustainability in a regional university of Greece, was conducted and is discussed in relation to the university's specific characteristics – its fragmented nature with campuses situated on five Aegean islands, its public status as well as its role in creating and dispersing knowledge in less developed areas of the country.     

Cost-effective forest conservation and criteria for potential conservation targets: a Finnish case study

Selecting reserves for forest biodiversity maintenance is often done by setting criteria for components of structural elements of biodiversity, such as a volume of decaying wood. We tested how the different threshold values for the components of structural elements affect the cost-effective site selection. Using Finnish National Forest Inventory information and remote sensing data, we determined a habitat quality index and economic value for each site in Satakunta region in Finland. Moreover, we defined several sets of potential conservation targets using alternative criteria for the habitat quality index developed for the Finnish case study. These figures were used in the site selection model in order to maximize the sum of habitat index of selected areas under a given budget constraint. We found that the production possibility frontier for the outputs of timber and biodiversity is only slightly concave when using the given threshold values. Thus, the optimal combination of the outputs is sensitive to the relative values of these goods. Our results suggest that an integrated approach in forest conservation could provide to environmental managers considerable cost savings compared with current management practices. Environmental managers could also reduce conservation costs by loosening the criteria for potential conservation targets. This would not lower considerably the quality of conserved forests.     

Business frameworks for sustainable society: a case study on reuse industries in Japan

This paper presents a new perspective on the reuse businesses of independent reuse business companies (IRBCs) in Japan. A majority of previous studies on reuse and remanufacturing have focused on the businesses of original equipment manufacturers (OEMs). During the past twenty years, however, in Japan, IRBCs have grown rapidly, especially those that launched new types of secondhand shops. The author proposes that the reuse businesses of IRBCs can provide useful information for academics, OEMs, and policy makers. A key finding is the strategies developed by IRBCs to ensure the volume of used products collected and to stimulate demand for used products. This paper compares the features of IRBC reuse businesses with those of OEMs, and discussed the results and implications of an interview survey with select IRBCs.     

Uncertainty evaluation in air quality planning decisions: a case study for Northern Italy

In recent years, evaluating the robustness of environmental models results has become essential in order to effectively support decision makers to define suitable emission control strategies. This evaluation is performed in literature through uncertainty and sensitivity analyses. Therefore, the application of such methodologies to air quality Integrated Assessment Models (IAMs) is extremely challenging. In fact, in this case uncertainty and sensitivity analyses should be assessed not only for each single component of the system, but also for the overall IAM. In the paper, an attempt is made to extend and systematize the information available on uncertainty/sensitivity analysis, at first considering environmental models in general, and then focusing on air quality IAMs. The study aims to offer a tentative framework addressed to modelers and decision makers in the implementation of IAM and evaluation of its results. The framework has been tested on Lombardy region (Northern Italy). The results show how the uncertainty on Drivers of emissions propagates on the whole modelling chain characterizing an integrated assessment study.     

Carbon footprint analysis for increasing water supply and sanitation in South Africa: a case study

This study investigates the environmental burdens due to the provision of potable water and sanitation in the eThekwini Municipality (Durban), South Africa. This was achieved by employing LCA studies for the individual parts of the urban water system (impoundment, water treatment, distribution, collection, sewage treatment and water recycling). Based on the results of the individual LCAs a base case was constructed.For the provision of potable water and sanitation to new customers, which have not been previously served, two different scenarios (200 000 new customers in an urban environment with waterborne sewage and in a peri-urban environment with on-site sanitation) and three different options (maximising use of existing assets, recycling water and building new infrastructure) were considered and analysed. With regard to the impact scores calculated for both scenarios (urban and peri-urban), the recycling of water is followed by maximising the use of existing assets as the most environmentally friendly options. The construction of new infrastructure carries a higher environmental burden and the use of bottled water for drinking (an additional scenario) carries the highest environmental burden.     

Water footprint: methodologies and a case study for assessing the impacts of water use

The methodologies, approaches and indicators for assessing the impacts of freshwater usage are still evolving. The development of the water footprint concept has been an important step in this direction but the existing methodologies mainly assess the quantity of water used rather than the related impacts. Although there is a recognised need to consider the latter, particularly on a life cycle basis, the difficulty is that there are little or no reliable data on water usage in life cycle databases; furthermore, there is no agreed life cycle impact assessment method for estimating impacts related to freshwater use. However, there have been some methodological developments which propose methods for inventory modelling and impact assessment for water use in life cycle assessment. This paper reviews some of these approaches and discusses their strengths and limitations through a case study, which considers the impacts of freshwater consumption from corn-derived ethanol produced in 12 different countries. The results show a huge variation in the results between different methods and demonstrate the need for a standardised methodology for assessing the impacts of water use on a life cycle basis. Specific recommendations for further research in this field have been made accordingly.     

Rainwater harvesting technologies and practises in rural Uganda: a case study

Rainwater harvesting (RWH) is practised to mitigate water shortages in both household chores and agricultural use. This paper examines the relationship between adoption of household RWH technologies in rural Uganda (dependant variable), and the influence of independent variables (household characteristics such as age or monthly cash income, household perception including attitude or risk preference, and institutional and policy-assumed variables such as household’s contact with extension workers, RWH-subsidy provision, information flow channels and local community financial sources) that potentially influence technological adoption. Logistic regression techniques were used on a random sample of 224 respondents to ascertain the influence of variables on adoption of household RWH technologies. Analyses of hypothesised relationships revealed that subsidy provision was statistically significant for adoption of RWH technologies in rural Uganda. Overall, the paper suggests the consideration of household RWH subsidies in form of hardware when promoting adoption of RWH technologies. Moreover, when subsidies in the form of RWH construction materials are provided, the chances of having a RWH system installed seem more likely than when cash is provided owing to the many options cash can be used to purchase. Furthermore, household subsidy provision will produce immediate improvement in rural water supply, fostering the probability of adoption of rainwater technologies, a choice that can be made with regard to the form or level of public subsidy received depending on institutional and policy interventions.     

Effect of land management on soil microbial N supply to crop N uptake in a dry tropical cropland in Tanzania

In Sub-Saharan Africa, conservation of available soil N during early crop growth, when N loss by leaching generally occurs, is important to improve crop productivity. In a dry tropical cropland in Tanzania, we assessed the potential role of soil microbes as a temporal N sink-source to conserve the available soil N until later crop growth, which generally requires substantial crop N uptake. We evaluated the effect of land management [i.e., no input, plant residue application before planting (P plot) with or without fertilizer application, fertilizer application alone, and non-cultivated plots] on the relationship between soil N pool [microbial biomass N (MBN) and inorganic N] and crop N uptake throughout the ∼120-d crop growth period in two consecutive years. In the P plot, MBN clearly increased (∼14.6-29.6 kg N ha⁻¹) early in the crop growth period in both years because of immobilization of potentially leachable N, and it conserved a larger soil N pool (∼10.5-21.2 kg N ha⁻¹) than in the control plot. Especially in one year in which N leaching was critical, increased MBN maintained a larger soil N pool in the P plot throughout the experimental period, and a delay of increased MB C:N ratio and a substantial decrease in MBN was observed, indicating better soil microbial N supply for crop N uptake during later crop growth. Therefore, plant residue application before planting should enhance the role of soil microbes as a temporal N sink-source, leading to the conservation of potentially leachable N until later phase of crop growth, especially in years in which N leaching is relatively severe. Although further studies are necessary, our results suggest that plant residue application before planting is a promising option to achieve better N synchronization.     

Economic and other implications of integrated chain management: a case study

In this article, the concept of Integrated (Substance) Chain Management (ISCM) is discussed. The definition of ISCM, motives for ISCM, conditions for implementation, different points of view and a five-step model are dealt with. In addition, a number of possible barriers on the road to ISCM are discussed. The model is applied to a stonewool-producing company in the Netherlands. This company set up a recycling project in the form of a briquetting factory. The substance-flow sheets show that after implementing the briquetting factory, almost all process wastes are used in the factory and that fewer virgin materials have to be used. From an economic point of view, production in a more sustainable fashion is very unattractive: production costs per ton of stonewool product rose as a consequence of the use of the briquettes as an input. The barriers connected to ISCM are mainly economic and regulatory. Solutions for the Rockwool company may include engaging in environmental product stewardship and a realignment of the government policy towards dumping re-usable and non-separated building and construction waste.     

Integrating purifiers in refinery hydrogen networks: a retrofit case study

Hydrogen is an important utility in the production of clean fuels such as low-sulfur gasoline and diesel. The shortage of hydrogen resource motivates the integrated management of hydrogen networks with purifiers. In this paper, we propose a systematic approach for the retrofit design of these hydrogen networks. By establishing a state-space superstructure, all possible placements of existing compressors and purifiers are incorporated in the proposed MINLP model. Total annual cost (TAC) is employed as the optimizing object to understand the trade-offs between operating cost and capital cost. A real refinery system near Shanghai of China city is used to illustrate the applicability of the approach.     

Environmental reporting in a developing country: a case study on status and implementation in Malaysia

With the increase in awareness of environmental issues, the level of environmental disclosure and stakeholder demands for environmental information is increasing. New developments in the ISO 14000 standards also make it more evident that a company's environmental performance as well as its environmental reporting should be considered as strategic issues in business strategy. Especially for a developing country like Malaysia, many companies are under external pressures to improve their environmental performance.In this study, a review on the image and environmental disclosure, together with the challenges in environmental information management and a short case study are presented. Subsequently, the paper explores some of the strategic implications of environmental reporting as an important tool for improved environmental management.     

Sustainable island businesses: a case study of Norfolk Island

Conventional measures aimed at tackling the energy and waste issues of island communities focus on technological solutions, such as the introduction of renewable energy sources. There exists a history of technology implementations on small islands that have failed because of a lack of continuing skills and financial resources needed for ongoing operation and maintenance. Despite these experiences, what has received little attention so far are measures aimed at achieving island-friendly solutions by reducing their material metabolism, for example, by recycling and re-use. The two case studies presented in this work show that conservation, efficiency and reductions of the overall material metabolism of economic activity can be as effective as purely technologically driven changes. Both case studies demonstrate exceptional sustainability performance in terms of material flow and greenhouse gas emissions. The income growth scenarios show that – from a sustainability point of view – increasing tourist yield rather than tourist numbers is preferable for coping with price hikes and a finite resource base, and is also more likely to keep within bounds the strain on the island's people and infrastructure.