Validation of spectrophotometric method for Se(IV) determination: analytical applications

As selenium is an important part of the antioxidant enzymes and also because there are several studies suggesting a possible link between cancer and selenium deficiency, this paper presents a spectrophotometric method for the assay of Se(IV), using N,N-diethyl-p-phenylenediamine monohydrochloride as reagent. The proposed method is based on the reaction between the selenium and potassium iodide in low acidic medium, when iodine is released. This last product will further oxidise the new reagent. The final obtained product is strongly coloured in red and has an absorption maximum at 552 nm and molar extinction coefficient (ε) of 6.1?×?10⁴ L mol^?1 cm^?1. The optimum working conditions were established, and the developed method was validated, being characterised by a good linearity (in the range of 0.5–3.0 μg/mL), a limit of detection (0.0573 μg/mL) and a limit of quantification (0.1737 μg/mL). At the same time, the repeatability, the precision of the method and the accuracy were established. The proposed and validated method was applied with good results for the determination of Se(IV) in spring and bottled water from Iasi and also in pharmaceutical and cosmetic products.     

一种新的絮凝沉淀实验的数据处理法

通过分析现有絮凝沉淀实验的数据处理方法,指出了其存在的不足。并提出了其改进后的新方法     

The development of an ecological classification data management and analysis system for British Columbia

Since 1975, the British Columbia Ministry of Forests has been systematically developing an ecosystem classification of the province, an area covering 94 million hectares. This Biogeoclimatic Ecosystem Classification (BEC) system provides a framework for resource conservation and management. To date, approximately 250 person-years have been invested in the collection, analysis and synthesis of over 8000 ecological (vegetation and environmental data) plots, and in the production of ecological field guides.The development of a database and analysis system on the micro-computer platform to support a classification system of this magnitude was a complex procedure that required judicious planning and coordination. We have developed data-processing software that permits a user to select raw data from broad provincial or regional coverage to plot- and species-level summaries, and to export the data to a variety of output formats.This paper addresses key issues for handling ecological field data on the desktop computer with emphasis on standards, operator ease-of-use, and data access.     

Field test results of an automated exposure assessment tool, the local positioning system (LPS)

A user-friendly environmental monitoring system that collects real time data has been developed. Flash card memory logs exposure data from multiple sensors along with corresponding times and positions. Optional use of telemetry repeaters and a reference station allows central monitoring of data to assess exposure and to initiate intervention when safe levels are exceeded. A software analysis package allows researchers to identify exposure hot spots and direct control efforts, with the ultimate goal being to reduce injury and disease. Preliminary field test results document position accuracy and system performance in harsh environments.     

A rapid and sensitive analytical method for the quantification of residues of endosulfan in blood

A new sensitive analytical procedure has been developed for the determination of residues of endosulfan in human blood samples. The method involves the extraction of residues of endosulfan from blood samples by the addition of 60% sulfuric acid at 10 degrees C, liquid/liquid partitioning by using hexane and acetone mixture (9:1) and quantification by using GC-ECD. Residues of endosulfan in blood samples were quantified as the sum of alpha-endosulfan, beta-endosulfan, endosulfan sulfate and endosulfandiol. The influence of temperature during the extraction has been studied. Recovery experiments were conducted over the concentration range 1.0-50 ng ml(-1) and the relative standard deviation calculated. The method was found to be sufficiently sensitive to quantify the residue of total endosulfan up to the 1.0 ng ml(-1) level. The recovery was 92% with a calculated relative standard deviation of 1.96%. Conversion of endosulfan to endosulfandiol is found to be less than 0.5% under the defined conditions. The method was applied to the analysis of residue contents of endosulfan and its metabolites in blood samples collected from the exposed population. The data obtained has been confirmed by GC-MS-EI in selective ion monitoring (SIM) mode.     

System dynamic simulation: A new method in social impact assessment (SIA)

Many complex social questions are difficult to address adequately with conventional methods and techniques, due to the complicated dynamics, and hard to quantify social processes. Despite these difficulties researchers and practitioners have attempted to use conventional methods not only in evaluative modes but also in predictive modes to inform decision making. The effectiveness of SIAs would be increased if they were used to support the project design processes. This requires deliberate use of lessons from retrospective assessments to inform predictive assessments. Social simulations may be a useful tool for developing a predictive SIA method. There have been limited attempts to develop computer simulations that allow social impacts to be explored and understood before implementing development projects. In light of this argument, this paper aims to introduce system dynamic (SD) simulation as a new predictive SIA method in large development projects. We propose the potential value of the SD approach to simulate social impacts of development projects. We use data from the SIA of Gareh-Bygone floodwater spreading project to illustrate the potential of SD simulation in SIA. It was concluded that in comparison to traditional SIA methods SD simulation can integrate quantitative and qualitative inputs from different sources and methods and provides a more effective and dynamic assessment of social impacts for development projects. We recommend future research to investigate the full potential of SD in SIA in comparing different situations and scenarios.     

Comparison of analytical results for chloride, sulfate and nitrate obtained from adjacent ice core samples by two ion chromatographic methods

The anions chloride, sulfate and nitrate in nearly 500 pairs of ice core samples from the same depth were determined in a 121 m long ice core from Svalbard. The analyses were performed separately using an ion chromatograph with Dionex AS9 and AS15 columns with Na(2)CO(3) and NaOH eluents. Results showed a small (5-6 microg l(-1)) but statistically significant difference in mean concentrations for chloride and sulfate but not for nitrate. 2% of the data indicate real differences in concentrations across the ice core. Despite these differences ion information in ice core layers are comparable for ice core paleoclimate and environmental studies even though analyses are made using two different procedures.     

A new method for municipal solid waste incinerator (MSWI) fly ash inertization, based on colloidal silica

Municipal solid waste incineration (MSWI) is a straightforward way to manage waste, however the disposal of process byproducts, mainly bottom and fly ash, is still a problem, because of their hazardous contents. Fly ash is a byproduct of many other processes that involve combustion to produce energy. In this paper we present and discuss a new method for MSWI fly ash inertization, mainly based on the use of colloidal silica as a stabilization agent for metals. In the patented procedure, fly ash of different provenance can be used to produce an inert and non-hazardous material, that can be reused. In fact to make the recovery process more efficient, landfilling should be totally avoided. For this reason, to enhance the possibility of reuse, a washing process, for salts recovery, is proposed as a final step of the inertization procedure. The obtained inert material is called COSMOS (COlloidal Silica Medium to Obtain Safe inert), and it is composed of calcium carbonate, calcium sulfate, silicon oxide and a wide quantity of non-soluble amorphous compounds. COSMOS does not contain any corrosive salts. This makes it extremely interesting for cement industry applications with several other advantages, and environmental benefits. The new proposed inertization procedure appears very promising, because it allows MSWI fly ash to be considered a valuable resource. Thanks to the obtained results, a demonstration project, in the frame of LIFE+, has been funded by the European Commission (LIFE+ 2008 project ENV/IT/000434, ).     

A methodology for treating missing data applied to daily rainfall data in the Candelaro River Basin (Italy)

Environmental time series are often affected by the “presence” of missing data, but when dealing statistically with data, the need to fill in the gaps estimating the missing values must be considered. At present, a large number of statistical techniques are available to achieve this objective; they range from very simple methods, such as using the sample mean, to very sophisticated ones, such as multiple imputation. A brand new methodology for missing data estimation is proposed, which tries to merge the obvious advantages of the simplest techniques (e.g. their vocation to be easily implemented) with the strength of the newest techniques. The proposed method consists in the application of two consecutive stages: once it has been ascertained that a specific monitoring station is affected by missing data, the “most similar” monitoring stations are identified among neighbouring stations on the basis of a suitable similarity coefficient; in the second stage, a regressive method is applied in order to estimate the missing data. In this paper, four different regressive methods are applied and compared, in order to determine which is the most reliable for filling in the gaps, using rainfall data series measured in the Candelaro River Basin located in South Italy.     

Retrieval of total suspended matter (TSM) and chlorophyll-a (Chl-a) concentration from remote-sensing data for drinking water resources

The concentrations of chlorophyll-a (Chl-a) and total suspended matter (TSM) are major water quality parameters that can be retrieved using remotely sensed data. Water sampling works were conducted on 15 July 2007 and 13 September 2008 concurrent with the Indian Remote-Sensing Satellite (IRS-P6) overpass of the Shitoukoumen Reservoir. Both empirical regression and back-propagation artificial neural network (ANN) models were established to estimate Chl-a and TSM concentration with both in situ and satellite-received radiances signals. It was found that empirical models performed well on the TSM concentration estimation with better accuracy (R ² = 0.94, 0.91) than their performance on Chl-a concentration (R ² = 0.62, 0.75) with IRS-P6 imagery data, and the models accuracy marginally improved with in situ spectra data. Our results indicated that the ANN model performed better for both Chl-a (R ² = 0.91, 0.82) and TSM (R ² = 0.98, 0.94) concentration estimation through in situ collected spectra; the same trend followed for IRS-P6 imagery data (R ² = 0.75 and 0.90 for Chl-a; R ² = 0.97 and 0.95 for TSM). The relative root mean square errors (RMSEs) from the empirical model for TSM (Chl-a) were less than 15% (respectively 27.2%) with both in situ and IRS-P6 imagery data, while the RMSEs were less than 7.5% (respectively 18.4%) from the ANN model. Future work still needs to be undertaken to derive the dynamic characteristic of Shitoukoumen Reservoir water quality with remotely sensed IRS-P6 or Landsat-TM data. The algorithms developed in this study will also need to be tested and refined with more imagery data acquisitions combined with in situ spectra data.     

Estimation of the global evolution of atmospheric pollution in Salamanca (Spain) during the 1993-2001 period according to one global index (ORAQI)

The aim of this study has been to use a global index to measure the air quality in the city, apart from individual assessment of the values of the concentrations of the different pollutants. We calculated the ORAQI with the data obtained at four air-pollution monitoring stations located in the city of Salamanca over the period between 1993 and 2001. For the calculations, SO2, PM10, NO2, CO and O3 were used as the most significant pollutants for the surroundings of the monitoring stations. The evolution of this index over 9 years is reported, and the repercussion of the most characteristic pollutants of each season of the year on the ORAQI along the whole period analysed is studied. The importance of the summer pollution in the characterisation of the least polluted surroundings was observed. At the most polluted sites, a decrease in the values corresponding to winter occurs, leading the ORAQI to take similar values along the whole year. In general, taking into account the surroundings of all the monitoring stations, the quality of the air to which the inhabitants of the city of Salamanca are exposed to can be said to be good.     

A simple method for the extraction of mutagens from airborne particles

Organic materials were extracted with acetone from filters of airborne particles by soaking, shaking, soxhletion, and sonication. These extracts were tested with and without S9 for mutagenicity using Ames assay and arabinose-resistant assay of Salmonella typhimurium. Among the extraction methods, soaking extract had the highest mutagenic activity followed by sonication, shaking, and soxhletion in both the assays. With the samples studied, it was concluded that soaking with acetone for 1/2 hr is the simplest and an efficient procedure for the extraction of mutagens from airborne particles.Results of cooperative investigation of NIOSH and West Virginia Agricultural and Forstry Experimental Station. Published with the approval of the Director of the West Virginia Agricultural and Forestry Experiment Station as Scientific Paper No. 1822.     

A two-column method for long-term monitoring of non-methane hydrocarbons (NMHCs) and oxygenated volatile organic compounds (o-VOCs)

A method has been developed for concurrent analysis of C2-C7 hydrocarbons and C2-C5 oxygenated volatile organic compounds (o-VOCs) including alcohols, aldehydes, ketones and ethers. A multi-bed, Peltier-cooled adsorbent trap, consisting of Carboxen 1000 and Carbopack B, was used to acquire one sample per hour. Upon injection the sample was split in an approximately 50:50 ratio between a 50 m aluminium oxide (Al2O3) porous layer open tubular (PLOT) column and a 10 m LOWOX column. Eluents from each column were then analysed using flame ionisation detection (FID). Regular calibration of the system was performed using a standard cylinder mixture at the parts per billion by volume (ppbV) level for non-methane hydrocarbons (NMHCs) and a permeation tube method for the oxygenated species. The system is fully automated with NMHC detection limits between 1 and 10 parts per trillion by volume (pptV) and o-VOC detection limits between 10 and 40 pptV.     

A new method for environmental site assessment of urban solid waste landfills

Regarding various types of pollutant, waste management requires high attention. Environmental site selection study, prior to landfill operation, and subsequently, monitoring and maintaining of the location, are of foremost points in landfill site selection process. By means of these studies, it is possible to control the undesirable impacts caused by landfills. Study ahead aims at examination of effectiveness of a new method called Monavari 95–2 in landfill site assessment. For this purpose, two landfills Rasht and Andisheh, which are, respectively, located on humid and arid areas, were selected as case studies. Then, the results obtained from both sites were compared with each other to find out the weaknesses and strengths of each site. Compared with others similar methods, much more criteria (53 parameters) can be considered within this method, so the results will be more calculable. According to this method, Rasht landfill (site H) is classified as unacceptable landfill site i.e. there is an urgent need for a new suitable site for landfill, while Andishe Landfill (site D) is ranked as acceptable landfill site but needs environmental management program to handle the existing weaknesses.     

A new method for the characterisation and quantitative speciation of base metal smelter stack particulates

Base metal smelters may be a source of particulates containing metals of environmental concern released to the atmosphere. Knowledge of the quantitative chemical speciation of particulate releases from base metal smelters will be of value in smelter emission fingerprinting, site-specific risk assessments, predictions of the behaviour of smelter stack particulates released to the environment and in resolving liability issues related to current and historic releases. Accordingly, we have developed an innovative approach comprising bulk chemical analysis, a leaching procedure, X-ray diffraction analysis and scanning electron microscopy/electron probe microanalysis characterisation in a step-wise apportioning procedure to derive the quantitative speciation of particulate samples from the stacks of three copper smelters designated as A, B and C. For the A smelter stack particulates, the major calculated percentages were 29 CuSO₄, 20 ZnSO₄.H₂O, 13 (Cu_0.94Zn_0.06)₂(AsO₄)(OH), 11 PbSO₄ and four As₂O₃. For the B smelter stack particulates, the primary calculated percentages were 20 ZnSO₄.H₂O, 20 PbSO₄, 12 CuSO₄ and nine As₂O₃. Finally, we calculated that the C smelter stack particulates mostly comprised 34 ZnSO₄.H₂O, 19 (Cu_0.84Zn_0.16)(AsO₃OH), 11 PbSO₄, 10 As₂O₃ and nine Zn₃(AsO₄)₂. Between 56% and 67% by weight of the smelter stack particulates, including the As, was soluble in water. For these and other operations, the data and approach may be useful in estimating metals partitioning among water, soil and sediment, as well as predictions of the effects of the stack particulates released to the environment.     

A solid-phase microextraction method for the in vivo sampling of MTBE in common reed (Phragmites australis)

Phytoscreening of phytoremediation-based plantings is discussed as a promising monitoring tool in literature. We developed and applied an analytical procedure for the in vivo sampling of methyl tert-butyl ether (MTBE) in the common reed (Phragmites australis) from a phytoremediation site highly polluted with MTBE. The approach uses solid-phase microextraction (SPME) with the SPME fibre directly introduced into the aerenchyma of the plant stem. For optimising the analytical procedure and estimating the capability of the proposed method, laboratory tests on the microcosm scale and field studies over one vegetation period were carried out. Furthermore, the results of in vivo SPME sampling were compared with those obtained with the traditional approach for analysing plants using dynamic headspace analysis. The MTBE signals detected within the plants were also correlated with the concentration in the water phase. The discussion of results showed the feasibility of the proposed method for a qualitative phytoscreening of volatile organic compounds present in wetland plants.     

Development of a new method for the determination of residues of the neonicotinoid insecticide imidacloprid in juvenile chinook (Oncorhynchus tshawytscha) using ELISA detection

The neonicotinoid insecticide imidacloprid (IMI) has been proposed as an alternative to carbaryl for controlling indigenous burrowing shrimp on commercial oyster beds in Willapa Bay and Grays Harbor, Washington. A focus of concern over the use of this insecticide in an aquatic environment is the potential for adverse effects from exposure to non-target species residing in the Bay, such as juvenile Chinook (Oncorhynchus tshawytscha) and cutthroat trout (O. clarki). Federal registration and State permiting approval for the use of IMI will require confirmation that the compound does not adversely impact these salmonids following field applications. This will necessitate an environmental monitoring program for evaluating exposure in salmonids following the treatment of beds. Quantification of IMI residues in tissue can be used for determining salmonid exposure to the insecticide. Refinement of an existing protocol using liquid-chromatography mass spectrometry (LC-MS) detection would provide the low limits of quantification, given the relatively small tissue sample sizes, necessary for determining exposure in individual fish. Such an approach would not be viable for the environmental monitoring effort in Willapa Bay and Grays Harbor due to the high costs associated with running multiple analyses, however. A new sample preparation protocol was developed for use with a commercially available enzyme-linked immunosorbent assay (ELISA) for the quantification of IMI, thereby providing a low-cost alternative to LC-MS for environmental monitoring in Willapa Bay and Grays Harbor. Extraction of the analyte from the salmonid brain tissue was achieved by Dounce homogenization in 4.0 mL of 20.0 mM Triton X-100, followed by a 6 h incubation at 50-55 °C. Centrifugal ultrafiltration and reversed phase solid phase extraction were used for sample cleanup. The limit of quantification for an average 77.0 mg whole brain sample was calculated at 18.2 μg kg(-1) (ppb) with an average recovery of 79%. This relatively low limit of quantification allows for the analysis of individual fish. Using controlled laboratory studies, a curvelinear relationship was found between the measured IMI residue concentrations in brain tissue and exposure concentrations in seawater. Additonally, a range of IMI brain residue concentrations was associated with an overt effect; illustrating the utility of the IMI tissue residue quantification approach for linking exposure with defined effects.     

A new four-step hierarchy method for combined assessment of groundwater quality and pollution

A new four-step hierarchy method was constructed and applied to evaluate the groundwater quality and pollution of the Dagujia River Basin. The assessment index system is divided into four types: field test indices, common inorganic chemical indices, inorganic toxicology indices, and trace organic indices. Background values of common inorganic chemical indices and inorganic toxicology indices were estimated with the cumulative-probability curve method, and the results showed that the background values of Mg²⁺ (51.1 mg L^?1), total hardness (TH) (509.4 mg L^?1), and NO₃ ^? (182.4 mg L^?1) are all higher than the corresponding grade III values of Quality Standard for Groundwater, indicating that they were poor indicators and therefore were not included in the groundwater quality assessment. The quality assessment results displayed that the field test indices were mainly classified as grade II, accounting for 60.87% of wells sampled. The indices of common inorganic chemical and inorganic toxicology were both mostly in the range of grade III, whereas the trace organic indices were predominantly classified as grade I. The variabilities and excess ratios of the indices were also calculated and evaluated. Spatial distributions showed that the groundwater with poor quality indices was mainly located in the northeast of the basin, which was well-connected with seawater intrusion. Additionally, the pollution assessment revealed that groundwater in well 44 was classified as “moderately polluted,” wells 5 and 8 were “lightly polluted,” and other wells were classified as “unpolluted.”     

Spectrophotometric method for the determination of chromium (VI) in water samples

A simple and sensitive spectrophotometric method for the determination of chromium has been developed. The method is based on the diazotization of Dapsone in hydroxylamine hydrochloride medium and coupling with N-(1-Napthyl) Ethylene Diamine Dihydrochloride by electrophilic substitution to produce an intense pink azo-dye, which has absorption maximum at 540 nm. The Beer's law is obeyed from 0.02-1.0 microg mL(-1) and the molar absorptivity is 3.4854 L mol(-1) cm(-1). The Limits of quantification and Limit of detection of the proposed method are 0.0012 microg mL(-1) and 0.0039 microg mL(-1) respectively. The method has been successfully applied for the determination of chromium in water samples and the results were statistically evaluated with that of the reference method.     

A proposed impact assessment method for genetically modified plants (AS-GMP Method)

An essential step in the development of products based on biotechnology is an assessment of their potential economic impacts and safety, including an evaluation of the potential impact of transgenic crops and practices related to their cultivation on the environment and human or animal health. The purpose of this paper is to provide an assessment method to evaluate the impact of biotechnologies that uses quantifiable parameters and allows a comparative analysis between conventional technology and technologies using GMOs. This paper introduces a method to perform an impact analysis associated with the commercial release and use of genetically modified plants, the Assessment System GMP Method. The assessment is performed through indicators that are arranged according to their dimension criterion likewise: environmental, economic, social, capability and institutional approach. To perform an accurate evaluation of the GMP specific indicators related to genetic modification are grouped in common fields: genetic insert features, GM plant features, gene flow, food/feed field, introduction of the GMP, unexpected occurrences and specific indicators. The novelty is the possibility to include specific parameters to the biotechnology under assessment. In this case by case analysis the factors of moderation and the indexes are parameterized to perform an available assessment.