Dioxin and dioxin-like PCB exposure of non-breastfed Dutch infants

The exposure of humans to PCDD/Fs (polychlorinated dibenzo-p-dioxins and dibenzofurans) and dioxin-like PCBs (dl-PCBs, i.e. polychlorinated non-ortho and mono-ortho biphenyls) occurs predominantly via the intake of food. Young children have a relatively high intake of these substances, due to their high food consumption per kilogram body weight. As the exposure of non-breastfed infants to these compounds has not been assessed before in The Netherlands, we studied the dietary intake of 17 PCDD/Fs and 11 dioxin-like PCBs in 188 Dutch non-breastfed infants between 4 and 13 months. The food intake of the infants was assessed by a 2-d food record. From these data PCDD/F and dioxin-like PCB intake was calculated using PCDD/F and dioxin-like PCB concentrations of food products sampled in 1998/1999 in The Netherlands. The long-term PCDD/F and dioxin-like PCB exposure of the infants was calculated using the statistical exposure model (STEM). For infants of 5 months the chronic exposure to PCDD/F and dioxin-like PCB was 1.1pg WHO-TEQ (toxic equivalents) per kilogram body weight (bw) per day (95th percentile: 1.7pg WHO-TEQ/kg bwxd), which mainly originated from infant formula and vegetables and increased to 2.3pg WHO-TEQ/kg bwxd (95th percentile 3.7pg WHO-TEQ/kg bwxd) for infants just over 1 year old eating the same food as their parents. The percentage of formula-fed infants with an exposure exceeding the TDI of 2pg WHO-TEQ/kg bwxd was 5% at 5 months, 49% at 9 months and 64% at 12 months.     

Concentration of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like PCBs in human adipose tissue from Turkish men

There is no previous report from Turkey on chemically determined polychlorinated dibenzo-para-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (PCBs) in human tissues expressed as World Health Organization (WHO) toxic equivalents (TEQs). The objective of this study was to determine the occurrence of PCDDs/Fs, and dioxin-like PCBs in the general adult Turkish population. For this reason we measured adipose tissue concentrations of PCDDs/Fs and dioxin-like PCBs in 23 Turkish men living in Ankara,Turkey in 2004. PCDD/F concentrations ranged between 3.2 and 19.7 pg WHO-TEQ/g fat (5.34 and 42.7 WHO-TEQ/g fat, respectively, including dioxin-like PCBs). The mean concentrations of WHO(PCDD/F)-TEQ and WHO(PCB)-TEQ were 9.2 and 6.67 pg/g on a lipid basis , respectively. Samples were analyzed for PCDD/F and twelve dioxin-like PCB congeners using high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS). This study is very important since it is the first report on PCDDs/Fs and dioxin-like PCB contamination in human adipose tissue from Turkey.     

Temporal trends and spatial distribution of PCDD, PCDF, and PCB in pine and spruce shoots

In Germany, there is a lack of consistent and comparable data for the time dependent behaviour and spatial distribution of dioxin-like and indicator PCB in ambient air, deposition and plants. The aim of this study was to improve the data on PCDD/PCDF, dioxin-like PCB and non dioxin-like PCB in spruce and pine shoots from different locations and years by retrospective monitoring. The survey was conducted with archived samples of one-year old spruce shoots (Picea abies) and pine shoots (Pinus sylvestris) from the German environmental specimen bank. Two sets of samples from locations in urbanized areas in western and eastern Germany (Warndt and Duebener Heide Mitte, respectively) were investigated as time series. Additionally, spruce shoots from seven different rural locations sampled in the years 2000-2004 were analyzed in order to get an overview about the spatial distribution of PCB and PCDD/PCDF. The analytical results of the samples from the two urbanized areas clearly show that the atmospheric contamination with PCDD and PCDF has declined by about 75% between 1985 and 1997 at Warndt and about 40% between 1991 and 1997 at Duebener Heide. However, concentrations stayed virtually constant at both locations from 1997 to 2004 at a level of about 1 ng WHO-TEQ/kg dry matter (d.m.). Similarly, the investigation of spruce shoots from rural locations from 2000 to 2004 did not reveal a temporal trend at any site. PCDD/PCDF levels were between 0.1 and 1.0 ng WHO-TEQ/kg d.m. At the urbanized location Warndt the six indicator PCB as well as the 12 dioxin-like PCB according to WHO revealed a significant decline by more than 75% between 1985 and 1999. Thereafter, PCB levels stayed virtually constant. At the location Duebener Heide an overall decrease of PCB concentrations in pine shoots of about 60% was detected between 1991 and 2004. Spruce shoots from all locations showed a relevant contribution of dioxin-like PCB to the total WHO toxicity equivalent (PCDD/PCDF+PCB). In most samples, the contribution of dioxin-like PCB was between 21% and 41%. The TEQ contribution of PCB in the samples from three rural sites was higher and similar to the TEQ value of PCDD/PCDF. The investigated pine shoots from the urbanized site Duebener Heide showed a 15-28% contribution of dioxin-like PCB to total TEQ and thus lower than in spruce shoots from different locations. In all samples except one PCB 126 contributed to more than 80% to the PCB-TEQ.     

Development and validation of a method for analysis of "dioxin-like" PCBs in environmental samples from the steel industry

A method, previously used for determination of 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), has been modified for quantitative analysis of "dioxin-like" polychlorobiphenyls (PCBs) in environmental samples from the steel industry. The existing sample clean-up procedure, involving liquid chromatography on multi-layered silica and Florisil columns, has been extended to include a third chromatography stage on a basic alumina stationary phase. The additional clean-up stage is required for PCB analysis in order to eliminate interferences from relatively large concentrations of saturated cyclic and aliphatic hydrocarbons. Samples were analysed for WHO-12 congeners using high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) and standard solutions of the method US EPA 1668A. Replicate analysis of method blanks revealed background contamination for PCBs 118, 105 and 77, which are generally abundant in ambient air. These contaminants were taken into account using a subtraction method. The entire procedure was validated by replicate analysis (N = 3) of a certified reference sediment. The RSD for each WHO-12 congener was below 15%, 13C12-labelled PCB internal standard recoveries were in the range 70-95%. A waste dust sample collected in the electrostatic precipitator of a UK sinter plant was analysed for determination of PCDD/Fs and WHO-12 PCBs and exhibited a PCDD/F I-TEQ of 148.5 +/- 21.2 ngkg(-1) and a WHO-TEQ of 7.2 +/- 1.5 ngkg(-1). WHO-12 congeners contributed only 4.6% to the overall TEQ and PCB 126 was the major congener contributing to the WHO-TEQ (96%). The contribution to the overall TEQ of the waste dust sample was mainly attributed to PCDF followed by PCDD, which accounted for 86.6% and 8.7% to the overall TEQ, respectively.     

Heavy metal concentrations in green-lipped mussels collected from Tolo Harbour and markets in Hong Kong and Shenzhen

Green-lipped mussels, Perna viridis, were collected from Kat O, Yim Tin Tsai, Ma Liu Shui and Tap Mun around Tolo Harbour and six local markets in Hong Kong (Aberdeen, Shau Kei Wan, Kowloon City, Mongkok, Yuen Long) and Shenzhen (Dongmun) between July 1994 and February 1995 and analysed for cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb) and zinc (Zn). The metal concentrations of mussels collected from the study sites were Cd (0.45-1.44 microg/g), Cr (0.82-4.89 microg/g), Cu (6.02-23.99 microg/g), Ni (3.25-6.87 microg/g), Pb (2.02-4.36 microg/g) and Zn (90-135 microg/g), while those from the markets were Cd (0.27-1.44 microg/g), Cr (1.09-3.30 microg/g), Cu (9.05-17.8 microg/g), Ni (2.44-5.25 microg/g), Pb (1.17-5 microg/g) and Zn (51-103 microg/g). The metal concentrations were below the maximum permissible levels set by the Hong Kong Government. In addition, seasonal variation of metal accumulation in mussels was investigated in Yim Tin Tsai and Ma Liu Shui and a reduction in the total heavy metal concentrations during winter was noted. The non-carcinogenic hazard index of mussels collected from Tolo Harbour and from Hong Kong markets was between 0.46 and 1.36 compared with those from Shenzhen markets (0.85-1.46), which indicated a low but possible risk in consuming the mussels.     

A comparison of TEQ contributions from PCDDs,PCDFs and dioxin-like PCBs in sewage sludges from Catalonia,Spain

Eight sewage sludges from rural, urban and industrial wastewater treatment plants (WWTPs) in Catalonia (Spain) were analysed for polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs) to determine the present levels of contamination. A method based on an automated cleanup system followed by an isotope-dilution high-resolution mass spectrometric analysis was employed. Total toxicity equivalent (WHO-TEQ) values were calculated using the toxicity equivalent factors (WHO-TEFs) proposed by WHO for dioxin-like PCBs, PCDDs and PCDFs. The WHO-TEQ(PCDD/F) values for these samples ranged from 4.9 to 20.8 pg/g dry weight (d.w.), with a mean value of 9.3 pg/g d.w., whereas WHO-TEQ(PCB) levels ranged between 1.9 and 6.6 pg/g d.w., with a mean value of 4.2 pg/g d.w. The WHO-TEQ(PCB) contribution varied from 13% to 50%, suggesting that PCB contribution on the toxicity of the samples must be taken into account. Moreover, these contemporary PCDD, PCDF and PCB concentrations were compared with previous data obtained from sewage sludge samples collected during the 80s. Our findings show that contemporary PCDD, PCDF and PCB levels have declined since the 80s.     

Correlation between PCDD/F, PCB and PCBz in coal/waste combustion. Influence of various inhibitors

In the flue gas of co-combustion of solid waste and coal in a laboratory scale furnace high concentrations of polychlorinated dibenzo-p-dioxin and furans (PCDD/F), polychlorinated biphenyls (PCB) and polychlorinated benzenes (PCBz) have been detected. These toxic emissions have been reduced by the help of various inhibitors added to fuel before incineration. Knowledge of the congener pattern and homologue profiles of PCDD/F, PCB and PCBz is important to elaborate the mechanism of formation and inhibition of the toxic compounds formed during co-combustion of solid waste and coal. Principle component analysis (PCA) is used in order to find the similarity between the samples and separate them according their toxicity. By the help of the component analysis (CA) the best correlated congeners are effectively detected. Using linear regression between the independent variables and the indicator parameters various good correlated pairs between PCDD/F, PCB and PCBz have been elaborated. Generally it was found that the samples with higher toxicity show a good correlation between tetra- and pentachlorinated benzenes and tetra- and pentachlorinated dibenzo-p-furans. The best indicator parameter for PCDD/F World Health Organization toxic equivalent (WHO-TEQ) among the PCBz congeners investigated is 1,2,4,5-TCBz. This isomer is also significantly correlated with PCDD/F WHO-TEQ and with the sum of PCDD/F WHO-TEQ and PCB WHO-TEQ. However for samples with higher percentage of inhibitors the above mentioned relationship between the surrogate and WHO-TEQ disappeared. The PCB homologues and congeners show no correlation with PCBz and PCDD/F homologues and congeners.     

Air concentrations of PCDD/Fs, PCBs and PCNs using active and passive air samplers

The concentrations of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) were determined in air samples collected at four sampling sites located in two zones of Barcelona (Spain): near a municipal solid waste incinerator (MSWI) and a combined cycle power plant (3 sites), and at a background/control site. Samples were collected using high-volume active samplers. Moreover, 4 PUF passive samplers were deployed at the same sampling points during three months. For PCDD/Fs, total WHO-TEQ values were 27.3 and 10.9 fg WHO-TEQm(-3) at the urban/industrial and the background sites, respectively. The sum of 7 PCB congeners and the Sigma PCN levels were also higher at the industrial site than at the background site. In order to compare active and passive sampling, the accumulated amounts of PCDD/Fs, PCBs and PCNs in the four passive air samplers, as well as the total toxic equivalents in each sampling site were also determined. To assess the use of PUF passive samplers as a complementary tool for PCDD/F, PCB and PCN monitoring, sampling rates were calculated in accordance with the theory of passive air samplers. PUF disks allowed establishing differences among zones for the POP levels, showing that they can be a suitable method to determine POP concentrations in air in areas with various potential emission sources. Although both particle and gas phase were sorbed by the PUFs, data of gas phase congeners are more reproducible.     

Changes to the TEF schemes can have significant impacts on regulation and management of PCDD/F and PCB

The changes recommended by the World Health Organisation (WHO) to the toxic equivalency factors (TEFs) for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F) and the recommendation to extend both the TEF scheme and the tolerable daily intake (TDI) to include "dioxin-like" PCB congeners have significant implications for regulators who have relied heavily on the International TEF (I-TEF) scheme in setting and monitoring limits and exposure to these compounds. This paper examines example data sets of sources, environmental concentrations, food and exposure to indicate likely changes in calculated toxic equivalent (TEQ) due to the recommended changes to TEFs. Many published data sets available do not provide congener specific data for PCDD/F which limits the ability to recalculate TEQs. There are even fewer congener specific data published to enable calculation of TEQs for the dioxin-like PCBs. In general TEQs calculated using the WHO scheme for emissions to air were found to show small increases (in the order of 1-10%) in comparison to the I-TEQ (for PCDD/F), some sludge samples showed substantial decreases (up to 70%). Levels in food and calculations of exposure showed that the change to TEFs for PCDD/F increased calculated exposure by 10-20% while the change to PCB TEFs decreased calculated TEQ attributable to PCB by 0-10%. The effects of including PCB in the overall TEQ and the changes to TEFs for PCDD/F substantially increase calculated TEQ exposure. Congener specific data should be presented to allow calculation of desired TEQ and the impact of the changes on emission limits, regulations on sludge use and environmental quality standards should all be carefully considered. The absence of data on emissions of dioxin-like PCB means that it is not possible to estimate with any certainty the impact on overall TEQ emissions of including the nominated PCB. Given the potential for confusion with the proliferation of TEFs and the extension to include both PCDD/F and PCB in the calculation of TEQs it is important that great care is taken to clearly express which compounds are included and which TEF scheme has been applied in each case.     

PCDD/F and PCB multi-media ambient concentrations, congener patterns and occurrence in a Mediterranean coastal lagoon (Etang de Thau, France)

Ambient concentrations, congener patterns and multi-media distribution of PCDD/Fs and PCBs were determined in air, water, sediment and mussels in a semi-enclosed marine ecosystem (Thau lagoon, France). summation operator2,3,7,8-PCDD/F and summation operator7ICES PCB air concentrations (0.2-1.4 and 31-57pg m(-3), respectively) were typical of rural areas. Concentrations in the water column were very low for PCDD/Fs (163-476fg L(-1)) and low for PCBs (138-708pg L(-1)). PCDD/F and PCB concentrations found in surface sediment (0.15-1.6 and 2.5-33ng g(-1) d.w., respectively) and mussel (13-21pg g(-1) d.w. and 10-39ng g(-1) d.w., respectively) were medium levels. PCDD/F congener patterns observed in air, water particulate phase and sediments were similar suggesting direct coupling among these compartments and atmospheric inputs of PCDD/Fs into the lagoon. Conversely, for the same set of samples, similar patterns were not observed for PCBs in the mentioned compartments.     

A preliminary investigation of persistent organic pollutants in ambient air in Hong Kong

Air samples were collected for characterisation of PCDD/Fs and other persistent organic pollutants (POPs) such as aldrin, alpha-HCH, beta-HCH, delta-HCH, gamma-HCH, o,p'-DDT, p,p'-DDT, o,p'-DDE, p,p'-DDE, o,p'-DDD, p,p'-DDD, dieldrin, endrin, endosulfan I and II, heptachlor, heptachlor epoxide and hexachlorobenzene during the winter of 2000/2001 at the weather station of the Hong Kong Observatory at Tai Mo Shan (TMS), which is the highest point (approximately 957 m) in Hong Kong, besides the routine monitoring of PCDD/Fs and 200 other toxic air pollutants (TAPs) at two urban TAPs stations at Tsuen Wan and Central & Western. Concentrations of the pollutants detected at TMS station were evaluated and compared to those recorded at the urban stations. Though pesticides including alpha-HCH, hexachlorobenzene, DDT, DDE, heptachlor, and endosulfan I were detected, these pesticides were found at relatively low concentrations of about 0.02-0.23 ng/m3 and should not have any significant health effects. Concentrations of some of the monitored POPs were found to be higher whilst most of the monitored TAPs were at comparable levels to those measured at the urban stations during the same period. According to the Stockholm Convention on POPs (May 2001), the 12 chemicals labelled by the United Nations as the most dangerous are: aldrin, chlordane, DDT, dieldrin, endrin, heptachlor, mirex, toxaphene, hexachlorobenzene, PCBs and dibenzo-p-dioxins/dibenzofurans (PCDDs)/(PCDFs). Given that there has not been any large scale use of organo-chlorine pesticides recorded since the decline of local farming activities in recent years, the results of the present study again show that pesticides and POPs such as PCDDs/PCDFs are ubiquitous environmental contaminants present in the atmosphere of Hong Kong. The findings also indicate that organo-chlorine pesticides and PCDDs/PCDFs are among the most prevalent chlorinated semi-volatile pollutants present in Hong Kong. Results obtained in the present study suggest that selected pesticides may be used as tracers for transport of pollutants for regional air quality study.     

Nationwide monitoring of atmospheric PCDD/Fs and dioxin-like PCBs in South Korea

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) were measured in ambient air samples collected from different parts of South Korea in 2008, and the measured levels were used for assessing the spatial and temporal distribution of atmospheric PCDDFs and DL-PCBs in South Korea. The average concentrations of atmospheric PCDD/Fs and DL-PCBs among the 37 sites were 28 fg I-TEQ m⁻³ (ND ∼ 617) and 1 fg WHO-TEQ m⁻³ (ND ∼ 0.016). Elevated atmospheric levels of PCDD/Fs and DL-PCBs observed at residential/industrial sites and in the north-west of Korea, indicated a potential contribution and impacts of anthropogenic sources of PCDD/Fs and DL-PCBs. These levels were similar or lower than those previously reported in other ambient air surveys. Average concentrations of PCDD/Fs showed small seasonal variations (ANOVA analysis, p = 0.144). The highest concentrations of PCDD/Fs were observed during winter, followed by spring, autumn and summer. Atmospheric PCDD/Fs and DL-PCBs in South Korea rapidly decreased during the last 10 years (1998-2008), demonstrating the efficiency of stricter regulations and the application of best available technologies/best environmental practices at emission sources. Comparison of the congener profiles and principal component analysis showed that current atmospheric PCDD/Fs are mostly influenced by industrial sources and PCBs from old commercial PCB uses. Nationwide POPs monitoring will continue and allows an effective evaluation of the implementation of the Stockholm Convention on POPs.     

Polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls, naphthalenes and polybrominated diphenyl ethers in the edible fish caught from the Baltic Sea and lakes in Finland

A total of 156 fish composite samples were collected from five areas of the Baltic Sea and from three lakes and analysed for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polybrominated diphenyl ethers (PBDEs). The European Union's maximum permissible level for PCDD/Fs, 4 pg WHO-TEQ/g fresh weight (fw), was exceeded in salmon, river lamprey and Baltic herring. In other species from the Baltic Sea, the 90th percentile was 3.42 pg WHO(PCDD/F)-TEQ/g fw. In the lake fish, the concentrations of PCDD/Fs, PCBs and PCNs were only 29-46% of those in the same species caught from the Baltic Sea, whereas the concentrations of PBDEs in the lake fish were as high as in the Baltic Sea fish. Dioxin-like PCBs contributed to the total dioxin-like toxicity of PCBs and PCDD/Fs by 49+/-12% in all the analysed samples.     

Persistent organic pollutants in atmospheric deposition and biomonitoring with Tillandsia usneoides (L.) in an industrialized area in Rio de Janeiro state, southeast Brazil--Part II: PCB and PAH

Monitoring of immission of persistent organic pollutants in the industrialized area of Volta Redonda (V.R.) and in the National Park of Itatiaia (PNI) in southeast Brazil was performed using an endemic bromeliad species as biomonitor and measuring bulk deposition rates of polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH). For the sum of PCB, overall deposition rates were between 17 and 314 ng/(m2 day) in winter and between 43 and 81 ng/(m2 day) in summer, respectively. Deposition rates of dioxin-like PCBs ranged from 0.14 to 2.8 pg WHO-TEQ/(m2 day) in winter and from 0.90 to 4.3 pg WHO-TEQ/(m2 day) in summer. PCB deposition rates (total PCB and WHO-TEQ) were in the same range in winter in V.R. and PNI. In summer, contamination levels in V.R. were 6-10-folds higher than in PNI. PCB concentrations in biomonitor samples from V.R. and PNI were in the same range in summer and in winter. Concentrations of total PCB ranged from 14 to 95 microg/kg dry matter (d.m.) in winter and from 18 to 27 microg/kg d.m. in summer, respectively. The TEQ values were between 1.7 and 4.1 ng WHO-TEQ/kg d.m. in winter and between 1.9 and 2.9 ng WHO-TEQ/kg d.m. in summer. PCB concentrations of di-ortho PCB but not of non-ortho PCB were a factor of 2-4 lower in summer in both areas. PCB congener profiles resembled those from technical formulations. The profiles shifted to the higher chlorinated congeners in summer, probable due to revolatilisation of the lighter components at higher temperatures. PCB profiles in biomonitor resembled those from deposition samples and the shift to the heavier congeners in summer was even more pronounced. PAH deposition rates were in a similar range in both areas (131-2415 ng/(m2 day)). PAH levels in biomonitor samples from V.R. were about one order of magnitude higher than in samples from PNI indicating the impact of local sources. PAH profiles revealed stationary thermal processes as main source of contamination in V.R. whereas in PNI, biomass burning seems to be the main contamination source.     

Emission of PCDD/Fs and dioxin-like PCBs from metallurgy industries in S. Korea

The metallurgy industry and municipal waste incinerators are considered the main sources of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) in many countries. This study investigated the emission factors and total emissions of PCDD/Fs and dioxin-like polychlorinated biphenyls (PCBs) emitted from metallurgy industries (including ferrous and nonferrous foundries) in Korea. The toxic equivalency (TEQ) emission factor of PCDD/Fs was the highest for secondary copper production, at 24451 ng I-TEQ/ton. The total estimated emissions of PCDD/Fs from these sources were 35.259 g I-TEQ/yr, comprising 0.088 g I-TEQ/yr from ferrous foundries, 31.713 g I-TEQ/yr from copper production, 1.716 g I-TEQ/yr from lead production, 0.111 g I-TEQ/yr from zinc production, and 1.631 g I-TEQ/yr from aluminum production. The total estimated annual amounts of dioxin-like PCBs emitted from these sources were 13.260 g WHO-TEQ/yr, comprising 0.014 g WHO-TEQ/yr from ferrous foundries, 12.675 g WHO-TEQ/yr from copper production, 0.170 g WHO-TEQ/yr from lead production, 0.017 g WHO-TEQ/yr from zinc production, and 0.384 g WHO-TEQ/yr from aluminum production. The highest emission factor was found for secondary copper smelting, at 9770 ng WHO-TEQ/ton.     

Analysis of dioxin-like compounds in vegetation and soil samples burned in Catalan forest fires. Comparison with the corresponding unburned material

Only a few data are reported about the formation of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) in forest fires. However, the inventories of sources undertaken by several European and American countries consider natural fires as a possible source of PCDD/F and, in some cases, as one of the most important. In our work we have analysed vegetation and soil samples burned in four forest fires which happened in Catalonia in the summer of 1998. The concentration of dioxin-like compounds (PCDD/F, non-ortho polychlorinated bi-phenyls (PCB) and mono-ortho PCB) has been compared to the concentration present in the corresponding unburned material collected in places near the fires but not affected. The results of this preliminary study show very low concentrations in all the samples, both burned and unburned. Although a change in the profile (proportional increase of tetrachlorinated congeners in PCDD/F) is observed in burned samples compared to unburned ones, the absolute values of concentration decrease in most samples. Therefore, natural fires seem not to be an important source of dioxin-like compounds. These results will be confirmed with air emissions measurements in future studies.     

Levels of PCDDs, PCDFs and PCBs in Belgian and international fast food samples

Congener-specific analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) were performed on twenty-eight non-pooled fast food samples collected in Belgium, Switzerland, Czech Republic, United States of America and Australia. PCDD/F and PCB concentrations for the four investigated types of meals were very low. PCDD/F values ranged from non-detected to 1.40 pg WHO-TEQ/g fat and from 0.79 to 2.08 pg WHO-TEQ/g fat for lower and upper bound, respectively. Major contributors to the PCDD/F TEQ were 1,2,3,4,7,8-HxCDD, 1,2,3,6,7,8-HxCDD, 2,3,7,8-TCDF and 2,3,4,7,8-PeCDF. The relative contribution of PCBs to the total TEQ was 68%. For adults, an average estimated intake was 6.7 pg WHO-TEQ/kg bw/month, including consumption of all types of analyzed meals, representing 9.5% of the PTMI. For child, a value of 14.5 pg WHO-TEQ/kg bw/month was obtained, representing 20.6% of the PTMI.     

Partitioning and removal of dioxin-like congeners in flue gases treated with activated carbon adsorption

Activated carbon adsorption is commonly used to control dioxin-like congener (PCDD/Fs and PCBs) emissions. Partitioning of PCDD/Fs and PCBs between vapor and solid phases and their removal efficiencies achieved with existing air pollution control devices (APCDs) at a large-scale municipal waste incinerator (MWI) and an industrial waste incinerator (IWI) are evaluated via intensive stack sampling and analysis. Those two facilities investigated are equipped with activated carbon injection (ACI) with bag filter (BF) and fixed activated carbon bed (FACB) as major PCDD/F control devices, respectively. Average PCDD/F and PCB concentrations of stack gas with ACI+BF as APCDs are 0.031 and 0.006ng-TEQ/Nm(3), and that achieved with FACB are 1.74 and 0.19ng-TEQ/Nm(3) in MWI and IWI, respectively. The results show that FACB could reduce vapor-phase PCDD/Fs and PCBs concentrations in flue gas, while the ACI+BF can effectively adsorb the vapor-phase dioxin-like congener and collect the solid-phase PCDD/Fs and PCBs in the meantime. Additionally, the results of the pilot-scale adsorption system (PAS) experimentation indicate that each gram activated carbon adsorbs 105-115ng-PCDD/Fs and each surface area (m(2)) of activated carbon adsorbs 10-25ng-PCDD/Fs. Based on the results of PAS experimentation, this study confirms that the surface area of mesopore+macropore (20-200A) of the activated carbon is a critical factor affecting PCDD/F adsorption capacity.     

Dietary intake of PCDDs, PCDFs and dioxin-like PCBs, due to the consumption of various marine organisms from Korea

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DL-PCBs) residues were measured in 70 marine organisms (40 species) from Korean coastal waters. The PCDD/Fs residues in the organisms varied from 0.02 to 4.39 pg WHO-TEQ/g wet weight and the DL-PCBs residues varied from 0.008 to 6.0 pg WHO-TEQ/g wet weight. The levels in fish from Korean coastal waters were comparable to those found in other countries. Comparing organism groups, the highest PCDD/Fs and DL-PCBs residues were recorded in crustaceans, followed by fish, cephalopods, bivalves and gastropods. Although the congener distributions of PCDD/Fs and DL-PCBs in the organism groups were different, the dominant contributors to the total TEQ concentrations in all groups were 2,3,4,7,8-pentachlorinated dibenzofuran (PeCDF), 1,2,3,7,8-pentachlorinated dibenzo-p-dioxin (PeCDD) and PCB 126. The dietary intake of PCDD/Fs and DL-PCBs from the consumption of marine organisms in Korea was estimated to be 0.68 pg WHO-TEQ/kg bodyweight/day. The contribution of DL-PCBs to the total dietary intake from all organisms groups averaged 60%. The relative contribution of each organism group to the total dietary intake was, in descending order: fish, crustaceans, cephalopods, bivalves and gastropods. The current dietary intake was lower than those in countries with a similar dietary pattern to Korea, but higher than those in countries with smaller quantities of seafood consumption.     

PCB and dioxin-like PCB in indoor air of public buildings contaminated with different PCB sources--deriving toxicity equivalent concentrations from standard PCB congeners

Data on dioxin-like PCB in indoor air of buildings with PCB-containing materials and on possible correlation between toxicity equivalent concentrations (TEQ) and levels of non-dioxin-like standard PCB is sparse. As part of a larger survey on indoor-air contamination with PCB, the connection between the concentration of standard PCB congeners and the dioxin-like toxicity expressed as TEQ was investigated. Indoor air samples (n=8) were collected in four public buildings with known PCB sources and total PCB levels in the range from 715 to 2250 ng/m3 and analyzed for the six non-dioxin-like standard PCB (congeners 28, 52, 101, 138, 153, 180), the twelve dioxin-like PCB congeners according to WHO and the 17 2,3,7,8-substituted PCDD/PCDF congeners. In three buildings where PCB were used as flame retardant coatings of acoustic ceiling tiles, PCB 101 had the maximum level among the six standard PCB, while in the building with permanent elastic sealants as PCB source, congeners 28 and 52 dominated the pattern by far. In the case of permanent elastic sealants as PCB source (n=3) a total PCB concentration of 1000 ng/m3 corresponded to a total TEQ level of 0.3-0.6 pg/m3. In contrast, in rooms with acoustic ceiling tiles as PCB source, 1.8-4.7 pg TEQ/m3 per 1000 ng total PCB/m3 were found. Linear regression analysis between PCB and TEQ indicated that PCB 118 might be used to calculate the total TEQ of dioxin-like PCB and PCDD/PCDF. By means of such a correlation it is possible to estimate TEQ by extrapolation from the results of less sophisticated analytical methods. It is tentatively recommended to use PCB 118 for screening purposes or re-evaluation of standard PCB indoor-air measurements. If only the six non-dioxin-like PCB standard congeners are available, a regression algorithm using the sum of PCB 101, 138, 153 and 180 might be used instead.