A critical review of the bioavailability and impacts of heavy metals in municipal solid waste composts compared to sewage sludge

The content, behaviour and significance of heavy metals in composted waste materials is important from two potentially conflicting aspects of environmental legislation in terms of: (a) defining end-of-waste criteria and increasing recycling of composted residuals on land and (b) protecting soil quality by preventing contamination. This review examines the effects of heavy metals in compost and amended soil as a basis for achieving a practical and sustainable balance between these different policy objectives, with particular emphasis on agricultural application. All types of municipal solid waste (MSW) compost contain more heavy metals than the background concentrations present in soil and will increase their contents in amended soil. Total concentrations of heavy metals in source-segregated and greenwaste compost are typically below UK PAS100 limits and mechanical segregated material can also comply with the metal limits in UK PAS100, although this is likely to be more challenging. Zinc and Pb are numerically the elements present in the largest amounts in MSW-compost. Lead is the most limiting element to use of mechanically-segregated compost in domestic gardens, but concentrations are typically below risk-based thresholds that protect human health. Composted residuals derived from MSW and greenwaste have a high affinity for binding heavy metals. There is general consensus in the scientific literature that aerobic composting processes increase the complexation of heavy metals in organic waste residuals, and that metals are strongly bound to the compost matrix and organic matter, limiting their solubility and potential bioavailability in soil. Lead is the most strongly bound element and Ni the weakest, with Zn, Cu and Cd showing intermediate sorption characteristics. The strong metal sorption properties of compost produced from MSW or sewage sludge have important benefits for the remediation of metal contaminated industrial and urban soils. Compost and sewage sludge additions to agricultural and other soils, with background concentrations of heavy metals, raise the soil content and the availability of heavy metals for transfer into crop plants. The availability in soil depends on the nature of the chemical association between a metal with the organic residual and soil matrix, the pH value of the soil, the concentration of the element in the compost and the soil, and the ability of the plant to regulate the uptake of a particular element. There is no evidence of increased metal release into available forms as organic matter degrades in soil once compost applications have ceased. However, there is good experimental evidence demonstrating the reduced bioavailability and crop uptake of metals from composted biosolids compared to other types of sewage sludge. It may therefore be inferred that composting processes overall are likely to contribute to lowering the availability of metals in amended soil compared to other waste biostabilisation techniques. The total metal concentration in compost is important in controlling crop uptake of labile elements, like Zn and Cu, which increases with increasing total content of these elements in compost. Therefore, low metal materials, which include source-segregated and greenwaste composts, are likely to have inherently lower metal availabilities overall, at equivalent metal loading rates to soil, compared to composted residuals with larger metal contents. This is explained because the compost matrix modulates metal availability and materials low in metals have stronger sorption capacity compared to high metal composts. Zinc is the element in sewage sludge-treated agricultural soil identified as the main concern in relation to potential impacts on soil microbial activity and is also the most significant metal in compost with regard to soil fertility and microbial processes. However, with the exception of one study, there is no other tangible evidence demonstrating negative impacts of heavy metals applied to soil in compost on soil microbial processes and only positive effects of compost application on the microbial status and fertility of soil are reported. The negative impacts on soil microorganisms apparent in one long-term field experiment could be explained by the exceptionally high concentrations of Cd and other elements in the applied compost, and of Cd in the compost-amended soil, which are unrepresentative of current practice and compost quality. The metal contents of source-segregated MSW or greenwaste compost are smaller compared to mechanically-sorted MSW-compost and sewage sludge, and low metal materials also have the smallest potential metal availabilities. Composting processes also inherently reduce metal availability compared to other organic waste stabilisation methods. Therefore, risks to the environment, human health, crop quality and yield, and soil fertility, from heavy metals in source-segregated MSW or greenwaste-compost are minimal. Furthermore, composts produced from mechanically-segregated MSW generally contain fewer metals than sewage sludge used as an agricultural soil improver under controlled conditions. Consequently, the metal content of mechanically-segregated MSW-compost does not represent a barrier to end-use of the product. The application of appropriate preprocessing and refinement technologies is recommended to minimise the contamination of mechanically-segregated MSW-compost as far as practicable. In conclusion, the scientific evidence indicates that conservative, but pragmatic limits on heavy metals in compost may be set to encourage recycling of composted residuals and contaminant reduction measures, which at the same time, also protect the soil and environment from potentially negative impacts caused by long-term accumulation of heavy metals in soil.     

Influence of olive mill wastewater in composting and impact of the compost on a Swiss chard crop and soil properties

The suitability of olive mill wastewater (OMW) for composting was studied by the addition of this liquid waste to a mixture of cotton gin waste and sewage sludge, and its composting was compared with that of another pile of similar composition, but without olive mill wastewater. Both piles were composted by the Rutgers static pile system in a pilot plant. To study the effects of both composts on plant yield and soil properties, a plot experiment was carried out with Swiss chard (Beta vulgaris L. var. cicla). Five treatments were applied: mineral fertiliser and two doses (30 and 60 tons ha(-1)) of both composts. The olive mill wastewater addition produced a compost with lower organic matter and nitrate concentrations, higher electrical conductivity, and a stabilised and humified organic matter similar to that of the compost produced without olive mill wastewater. The olive mill wastewater compost application to soil did not injure plants, producing a similar plant yield to both compost without olive mill wastewater and inorganic fertiliser. Also, the accumulation of potentially toxic heavy metals in plants cultivated with organic or mineral fertilisers did not reveal significant differences. The olive mill wastewater compost application to soil also improved the chemical and physicochemical properties of the soil.     

The composting potential of different organic solid wastes: experience from the island of Crete

For the past 20 years, the National Foundation for Agricultural Research in Crete and the School of Agricultural Technology of the Technological and Educational Institute of Crete have been involved in a number of research and development activities, related to the production and evaluation of compost derived from a variety of local solid, mainly agricultural organic wastes. Materials such as olive press cake, olive tree leaves (OTL) and branches, vine branches (VB), pressed grape skins (PGS), pig manure (PM), sewage sludge and the organic fraction of municipal solid waste (OFMSW) have been evaluated for their behaviour during composting, their compatibility in mixtures and the quality of the end product. The quality evaluation included both a detailed physiochemical (pH, electrical conductivity (EC), nutrients concentration, heavy metal concentration, etc.) and biological analyses (pathogenic microorganisms). It also included an agronomic evaluation, in which composts were used either as a soil amendment or as a component for substrates in open air or covered (greenhouse) cultivation mainly of local vegetables (tomatoes, cucumbers, etc.). All materials were composted successfully, especially when mixed. The end products contained large amounts of organic matter, usually combined with an increased EC value. Pressed grape skins should be considered as the ideal raw material, producing a high quality compost, with the lowest EC value (1.57 mS cm(-1)) and the largest organic matter concentration (84.50%), compared to all other materials. When any of the produced compost was used in a ratio of 30% by volume (v/v), it increased plant growth, whereas in larger volumes, it presented phytotoxic behaviour, inhibiting both root and shoot development.     

The potential conflict between traditional perceptions and environmental behavior: compost use by Muslim farmers

Although traditional societies often have a deep understanding of ecological relationships, traditional or religious values might be in conflict with current environmental values. According to Islamic Law, some compost sources used for agricultural purposes are impure, especially human and pig excreta. This study examined how Muslim farmers perceive the issue of impurity of compost sources and the extent to which the conflict between traditional and modern values affects compost use. Questionnaires were distributed to 77 Muslim and 11 Christian farmers in Israel, examining their personal characteristics, attitudes toward compost use, awareness of its sources and advantages, and the influence of traditional perceptions on the tendency to use compost. Interviews were conducted with agricultural consultants and Muslim clergy. Although the use of compost was limited, a higher level of awareness was found among the younger and/or more educated Muslim farmers. Varied attitudes were expressed regarding the degree of purity/impurity; 52 % of the respondents expressed willingness to use compost if derived from pure materials. The agricultural consultants were acquainted with Muslim farmers who recoiled from the use of compost. The Muslim religious leaders stated that impure substances can be purified through biochemical reactions during the composting process and noted that the use of compost is preferable if chemical fertilizers are harmful to the environment. Although Muslim farmers expressed willingness to use compost if it was proved to be pure according to Islam, this paper addresses how, in practical terms, universal environmental policies may give rise to value conflicts in traditional communities.     

Impact of climate change on the domestic indoor environment and associated health risks in the UK

There is growing evidence that projected climate change has the potential to significantly affect public health. In the UK, much of this impact is likely to arise by amplifying existing risks related to heat exposure, flooding, and chemical and biological contamination in buildings. Identifying the health effects of climate change on the indoor environment, and risks and opportunities related to climate change adaptation and mitigation, can help protect public health.We explored a range of health risks in the domestic indoor environment related to climate change, as well as the potential health benefits and unintended harmful effects of climate change mitigation and adaptation policies in the UK housing sector. We reviewed relevant scientific literature, focusing on housing-related health effects in the UK likely to arise through either direct or indirect mechanisms of climate change or mitigation and adaptation measures in the built environment. We considered the following categories of effect: (i) indoor temperatures, (ii) indoor air quality, (iii) indoor allergens and infections, and (iv) flood damage and water contamination.Climate change may exacerbate health risks and inequalities across these categories and in a variety of ways, if adequate adaptation measures are not taken. Certain changes to the indoor environment can affect indoor air quality or promote the growth and propagation of pathogenic organisms. Measures aimed at reducing greenhouse gas emissions have the potential for ancillary public health benefits including reductions in health burdens related heat and cold, indoor exposure to air pollution derived from outdoor sources, and mould growth. However, increasing airtightness of dwellings in pursuit of energy efficiency could also have negative effects by increasing concentrations of pollutants (such as PM_2.5, CO and radon) derived from indoor or ground sources, and biological contamination. These effects can largely be ameliorated by mechanical ventilation with heat recovery (MVHR) and air filtration, where such solution is feasible and when the system is properly installed, operated and maintained. Groups at high risk of these adverse health effects include the elderly (especially those living on their own), individuals with pre-existing illnesses, people living in overcrowded accommodation, and the socioeconomically deprived.A better understanding of how current and emerging building infrastructure design, construction, and materials may affect health in the context of climate change and mitigation and adaptation measures is needed in the UK and other high income countries. Long-term, energy efficient building design interventions, ensuring adequate ventilation, need to be promoted.     

Sustainable sanitation,improved use of composting latrines through mixing and moisturizing: case study in Paraguay

Providing sanitation for water-starved areas is crucial to environmental sustainability. Composting latrines are a sustainable sanitation method since they do not require water. However, little analysis has been done on the decomposition process occurring inside the latrine, including what temperatures are reached and what variables most affect the composting process. Having better knowledge of how outside variables affect composting latrines can aid designers and users on the choice, design, and use. Detailed field measurements of pit temperature in a latrine for several months were taken with the compost being frequently mixed and moistened. Ambient temperatures and the mixing of liquid to the compost resulted in temperature increases 100 % of the time, with seasonal ambient temperatures determining the rate and duration of the temperature increases. However, compost only reached total pathogen destruction levels in 10 % of the measurements. Storage time recommendation outlined by the World Health Organization should be complied with. If these storage durations are obtainable, the use of composting latrines is an economical and sustainable solution to sanitation while conserving water resources.     

Omega-3 fatty acids and the benefits of fish consumption: is all that glitters gold?

In recent years, a number of studies have clearly remarked the nutritional benefits of fish consumption: proteins, vitamins, minerals, and especially omega-3 polyunsaturated fatty acids (PUFAs), which may protect against several adverse health effects, including coronary heart disease mortality and stroke. However, some concerns about potential health risks derived from the environmental contaminants found in fish have been also raised. Therefore, balancing adequately the risks and benefits of fish consumption is currently a nutritional/environmental health key issue. In this paper, the most recent available scientific information concerning this issue is reviewed. It is concluded that although it seems evident that fish must be an important part of a balanced diet, to choose the most suitable species in terms of levels of PUFAs and pollutants, the frequency of consumption, and the meal size are essential aspects to balance benefits and risks of a regular consumption.     

An approach to comparative assessments of potential health risks from exposure to radionuclides and hazardous chemicals

The need to compare potential health risks to the public associated with different activities that can result in releases of hazardous substances to the environment is becoming increasingly important in decision-making. In making such comparisons, it is desirable to use equivalent indicators of potential health risks for radionuclides, chemical carcinogens, and noncarcinogenic hazardous chemicals. Current approaches to risk assessment that were developed for purposes of protecting human health do not provide equivalent indicators of potential risks from exposure to radionuclides and hazardous chemicals. Comparisons of environmental concentrations or calculated exposures or risks with standards for protection of public health also do not provide equivalent indicators of potential risks. We propose a simple approach to comparative risk assessments in which calculated exposures to any hazardous substances are expressed relative to no-observed-effect levels (NOELs) or, preferably, lower confidence limits of benchmark doses (BMDLs) in humans. This approach provides an equivalent, science-based indicator of the relative risks posed by different exposures to any hazardous substances.     

Bioremediation approaches for organic pollutants: A critical perspective

Due to human activities to a greater extent and natural processes to some extent, a large number of organic chemical substances such as petroleum hydrocarbons, halogenated and nitroaromatic compounds, phthalate esters, solvents and pesticides pollute the soil and aquatic environments. Remediation of these polluted sites following the conventional engineering approaches based on physicochemical methods is both technically and economically challenging. Bioremediation that involves the capabilities of microorganisms in the removal of pollutants is the most promising, relatively efficient and cost-effective technology. However, the current bioremediation approaches suffer from a number of limitations which include the poor capabilities of microbial communities in the field, lesser bioavailability of contaminants on spatial and temporal scales, and absence of bench-mark values for efficacy testing of bioremediation for their widespread application in the field. The restoration of all natural functions of some polluted soils remains impractical and, hence, the application of the principle of function-directed remediation may be sufficient to minimize the risks of persistence and spreading of pollutants. This review selectively examines and provides a critical view on the knowledge gaps and limitations in field application strategies, approaches such as composting, electrobioremediation and microbe-assisted phytoremediation, and the use of probes and assays for monitoring and testing the efficacy of bioremediation of polluted sites.     

Bioremediation approaches for organic pollutants: a critical perspective

Due to human activities to a greater extent and natural processes to some extent, a large number of organic chemical substances such as petroleum hydrocarbons, halogenated and nitroaromatic compounds, phthalate esters, solvents and pesticides pollute the soil and aquatic environments. Remediation of these polluted sites following the conventional engineering approaches based on physicochemical methods is both technically and economically challenging. Bioremediation that involves the capabilities of microorganisms in the removal of pollutants is the most promising, relatively efficient and cost-effective technology. However, the current bioremediation approaches suffer from a number of limitations which include the poor capabilities of microbial communities in the field, lesser bioavailability of contaminants on spatial and temporal scales, and absence of bench-mark values for efficacy testing of bioremediation for their widespread application in the field. The restoration of all natural functions of some polluted soils remains impractical and, hence, the application of the principle of function-directed remediation may be sufficient to minimize the risks of persistence and spreading of pollutants. This review selectively examines and provides a critical view on the knowledge gaps and limitations in field application strategies, approaches such as composting, electrobioremediation and microbe-assisted phytoremediation, and the use of probes and assays for monitoring and testing the efficacy of bioremediation of polluted sites.     

Pharmaceuticals and personal care products (PPCPs): A review on environmental contamination in China

Pharmaceuticals and personal care products (PPCPs) which contain diverse organic groups, such as antibiotics, hormones, antimicrobial agents, synthetic musks, etc., have raised significant concerns in recently years for their persistent input and potential threat to ecological environment and human health. China is a large country with high production and consumption of PPCPs for its economic development and population growth in recent years. This may result in PPCP contamination in different environmental media of China. This review summarizes the current contamination status of different environment media, including sewage, surface water, sludge, sediments, soil, and wild animals, in China by PPCPs. The human body burden and adverse effects derived from PPCPs are also evaluated. Based on this review, it has been concluded that more contamination information of aquatic environment and wildlife as well as human body burden of PPCPs in different areas of China is urgent. Studies about their environmental behavior and control technologies need to be conducted, and acute and chronic toxicities of different PPCP groups should be investigated for assessing their potential ecological and health risks.     

Evaluation of chemical and ecotoxicological characteristics of biodegradable organic residues for application to agricultural land

The use of organic waste and compost as a source of organic matter and nutrients is a common practice to improve soil physico-chemical properties, meanwhile reducing the need for inorganic fertilisers. Official guidelines to assess sewage sludge and compost quality are mostly based on total metal content of these residues. Measurement of the total concentration of metals may be useful as a general index of contamination, but provides inadequate or little information about their bioavailability, mobility or toxicity when the organic residue is applied to the soil. However, ecotoxicity tests provide an integrated measure of bioavailability and detrimental effects of contaminants in the ecosystem. In the present study, three different types of biodegradable organic residues (BORs) have been considered: sewage sludge from municipal wastewater treatment (SS), compost from the organic fraction of unsorted municipal solid waste (MSWC), and garden waste compost (GWC). The BORs were subjected to chemical characterisation and total metal quantification (Cd, Cr, Cu, Ni, Pb and Zn), in order to verify their suitability for land application. Water leachability was determined through the DIN 38414-S4 method, while the modified BCR sequential extraction procedure was used for metal speciation. Ecotoxicity of the BORs was studied by direct and indirect bioassays. Direct toxicity bioassays were: plant growth tests with cress (Lepidium sativum L.) and barley (Hordeum vulgare L.), and earthworm (Eisenia fetida) mortality. On the other hand, indirect exposure bioassays, with leachate from the residues, took into account: luminescent bacteria (Vibrio fischeri), seed germination (L. sativum and H. vulgare) and Daphnia magna immobilization. As far as total metal concentration is concerned, with particular reference to Zn, SS resulted neither suitable for the use in agriculture nor compatible to be disposed of as an inert material into landfill, according to the Directive 1999/31/EC. Zinc in SS was mainly present in exchangeable form (28.5%), appearing as highly bioavailable. As a consequence, SS exhibited either high ecotoxicity effects with the indirect exposure bioassays or significant mortality with the earthworm bioassay. Total content of metals in MSWC allowed its classification as "stabilised biowaste", according to 2nd draft [DG Env.A.2. Working document of Biological treatment of biowaste - 2nd draft. Directorate-General Environment, Brussels, 12th February; 2001. accessed in:http://europa.eu.int/comm/environment/waste/facts_en.htm, at 10/09/2002] while leachate, on the basis of the concentration of these contaminants, could be classified as "inert waste". This residue showed significant ecotoxicity effects with direct exposure bioassays as well as with the luminescent bacteria bioassay. However, it resulted less toxic than SS. Finally, GWC could be classified as a Class 2 compost, with no detectable toxic effects on the organisms used in the bioassays, except for the luminescent bacteria. In this case, an EC(50) of 73.0% was observed. Considering the results, the use of a battery of toxicity test in conjunction with chemical analysis should be suggested, in order to correctly assess possible environmental risks deriving from disposal or land application of biodegradable organic residues.     

An overview on the organic pollution around the Qinghai-Tibet plateau: The thought-provoking situation

The Qinghai-Tibet Plateau plays an important role in the ecological safety and human health of the surroundings due to its unique geographical position and function. Therefore, it is necessary to study the pollution status and potential risk in this area. This study summarizes the distribution of different organic pollutants in biota and environmental media of the Qinghai-Tibet Plateau. Moreover, it also pays attention to the potential health risks of these organic pollutants. Organochlorine pesticides (OCPs), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs) were the most frequently detected in different matrices. In general, the carcinogenic risks of organic pollutants were ranked in the very-low to moderate range for both children and adults. The carcinogenic risks of organic pollutants in fish, food, and water for children were 1–2 times higher than those for adults, while risks of organic pollutants in soil/sediment and in air for children were generally 10.6–16.5 and 2.6–2.8 times higher than those for adults, respectively. The maximal hazard quotient for non-carcinogenic risk was 0.95 (potential risk for children posed by organic pollutants in yak milk of Ruoergai), almost reaching an unacceptable level. Therefore, the potential health risks could not be neglected, especially for children who were more likely to be affected by the pollutants.     

Wastewater reuse in irrigation: A microbiological perspective on implications in soil fertility and human and environmental health

The reuse of treated wastewater, in particular for irrigation, is an increasingly common practice, encouraged by governments and official entities worldwide. Irrigation with wastewater may have implications at two different levels: alter the physicochemical and microbiological properties of the soil and/or introduce and contribute to the accumulation of chemical and biological contaminants in soil. The first may affect soil productivity and fertility; the second may pose serious risks to the human and environmental health. The sustainable wastewater reuse in agriculture should prevent both types of effects, requiring a holistic and integrated risk assessment. In this article we critically review possible effects of irrigation with treated wastewater, with special emphasis on soil microbiota. The maintenance of a rich and diversified autochthonous soil microbiota and the use of treated wastewater with minimal levels of potential soil contaminants are proposed as sine qua non conditions to achieve a sustainable wastewater reuse for irrigation.     

Aquaculture practices and potential human health risks: current knowledge and future priorities

Annual global aquaculture production has more than tripled within the past 15 years, and by 2015, aquaculture is predicted to account for 39% of total global seafood production by weight. Given that lack of adequate nutrition is a leading contributor to the global burden of disease, increased food production through aquaculture is a seemingly welcome sign. However, as production surges, aquaculture facilities increasingly rely on the heavy input of formulated feeds, antibiotics, antifungals, and agrochemicals. This review summarizes our current knowledge concerning major chemical, biological and emerging agents that are employed in modern aquaculture facilities and their potential impacts on public health. Findings from this review indicate that current aquaculture practices can lead to elevated levels of antibiotic residues, antibiotic-resistant bacteria, persistent organic pollutants, metals, parasites, and viruses in aquacultured finfish and shellfish. Specific populations at risk of exposure to these contaminants include individuals working in aquaculture facilities, populations living around these facilities, and consumers of aquacultured food products. Additional research is necessary not only to fully understand the human health risks associated with aquacultured fish versus wild-caught fish but also to develop appropriate interventions that could reduce or prevent these risks. In order to adequately understand, address and prevent these impacts at local, national and global scales, researchers, policy makers, governments, and aquaculture industries must collaborate and cooperate in exchanging critical information and developing targeted policies that are practical, effective and enforceable.     

Evaluation of landfill leachate in arid climate-a case study

Generation of leachate from municipal solid waste (MSW) landfill in arid regions has long been neglected on the assumption that minimal leachate could be formed in the absence of precipitation. Therefore, a case study was conducted at two unlined MSW landfills, of different ages, in the state of Kuwait in order to determine the chemical characteristics of leachate and examine the mechanism of leachate formation. Leachate quality data were collected from both active and old (closed) landfills where co-disposal of MSW and other solid and liquid wastes is practiced. The analysis of data confirms that leachates from both landfills are severely contaminated with organics, salts and heavy metals. However, the organic strength of the leachate collected from the old landfill was reduced due to waste decomposition and continuous gas flaring. A significant degree of variability was encountered and factors which may influence leachate quality were identified and discussed. A water balance at the landfill site was assessed and a conceptual model was presented which accounts for leachate generation due to rising water table, capillary water and moisture content of the waste.     

Levels of PCDD/PCDFs and PCBs in edible marine species and human intake: a literature review

Polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs) are lipophilic organic compounds whose origin comes from many different sources. PCDD/Fs and PCBs are ubiquitous and persistent environmental pollutants with a well known potential toxicity, which were included at the 1998 UN-EC POP protocol. Although human exposure to PCDD/Fs and PCBs can occur by various routes, food is the primary source. A number of studies have shown that the major food sources of these organic pollutants are fat-containing animal products, including fish and other seafood. Because of the frequent health recommendations concerning fish consumption, to determine the contribution to the dietary intake of chemical contaminants such as PCDD/Fs and PCBs through fish and other seafood consumption is an issue of special interest. This paper reviews the state of the science regarding recent literature on PCDD/F and PCB levels in marine species and human intake through fish and seafood consumption. The concentrations of these pollutants depend basically on the environment in which the respective species are caught. It is concluded that some groups of population frequently consuming high quantities of certain species could be significantly increasing health risks due to PCDD/F and PCB exposure.     

Long-term study of environmental levels of dioxins and furans in the vicinity of a municipal solid waste incinerator

From 1975 to 2004, a municipal solid waste incinerator (MSWI) was operating in Montcada (Barcelona, Catalonia, Spain). Because of the potential health risks derived from emission of pollutants by the facility, especially polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs), a long-term monitoring program focused on measuring the environmental levels of PCDD/Fs near the facility, and to assess the health risks for the population living in the neighborhood, was established between 1996 and 2002. A total number of 111 soil and 121 herbage samples were analyzed for PCDD/Fs during this period. Human health risks for the individuals living near the MSWI (500 and 1,000 m) were also assessed before (1998) and after modernization (2000) of the facility. It included PCDD/F inhalation, dermal contact, soil and dust ingestion, and food intake. All these data are here summarized. The environmental levels of PCDD/Fs showed that the MSWI was not the main responsible of the atmospheric pollution by these compounds. In turn, human health risks for the population living in the vicinity of the facility after introduction of a modern technology were negligible in comparison with the dietary PCDD/F exposure.     

Assessing the human health impacts of exposure to disinfection by-products — A critical review of concepts and methods

Understanding the public health implications of chemical contamination of drinking water is important for societies and their decision-makers. The possible population health impacts associated with exposure to disinfection by-products (DBPs) are of particular interest due to their potential carcinogenicity and their widespread occurrence as a result of treatments employed to control waterborne infectious disease.We searched the literature for studies that have attempted quantitatively to assess population health impacts and health risks associated with exposure to DBPs in drinking water. We summarised and evaluated these assessments in terms of their objectives, methods, treatment of uncertainties, and interpretation and communication of results.In total we identified 40 studies matching our search criteria. The vast majority of studies presented estimates of generic cancer and non-cancer risks based on toxicological data and methods that were designed with regulatory, health-protective purposes in mind, and therefore presented imprecise and biased estimates of health impacts. Many studies insufficiently addressed the numerous challenges to DBP risk assessment, failing to evaluate the evidence for a causal relationship, not appropriately addressing the complex nature of DBP occurrence as a mixture of chemicals, not adequately characterising exposure in space and time, not defining specific health outcomes, not accounting for characteristics of target populations, and not balancing potential risks of DBPs against the health benefits related with drinking water disinfection. Uncertainties were often poorly explained or insufficiently accounted for, and important limitations of data and methods frequently not discussed. Grave conceptual and methodological limitations in study design, as well as erroneous use of available dose–response data, seriously impede the extent to which many of these assessments contribute to understanding the public health implications of exposure to DBPs. In some cases, assessment results may cause unwarranted alarm among the public and potentially lead to poor decisions being made in sourcing, treatment, and provision of drinking water. We recommend that the assessment of public health impacts of DBPs should be viewed as a means of answering real world policy questions relating to drinking water quality, including microbial contaminants; that they should be conducted using the most appropriate and up-to-date data and methods, and that associated uncertainties and limitations should be accounted for using quantitative methods where appropriate.     

有机肥和化肥配施技术农户采纳意愿影响因素分析——基于苏、浙、皖三省农户调查

为了研究农户采纳有机肥和化肥配施技术意愿的主要影响因素,以风险规避理论为基础,通过建立二元Logistic回归模型,对苏浙皖3省596个农户样本的调研数据进行了分析。研究结果表明:户主年龄和是否有过特殊经历、农业从业人员占比、农户对过量施肥和有机肥的认知、政府是否对农业施肥技术进行过宣传对农户采纳有机肥和化肥配施技术的意愿具有显著影响。据此,提出了提高农户采纳有机肥和化肥配施技术意愿的政策建议:首先,政府应加大对有机肥和化肥配施技术的宣传和推广力度;其次,政府应协助相关组织解决有机肥当前面临的突出问题;最后,政府应完善相关政策的扶持力度。