北方某市环境空气颗粒物中重金属污染状况研究

对我国北方某市大气颗粒物的污染状况进行了研究。在主导风向上设置采样点,于冬季、夏季分别采集TSP、PM₁₀、PM_2.5 3种不同动力学直径的大气颗粒物。采用ICP-MS对TSP、PM₁₀、PM_2.5中的元素浓度进行分析,并对3种不同粒径颗粒物中的10种重金属采用富集因子法进行评价。结果表明,北方某市环境空气颗粒物中富集程度最严重的为Cd、Pb;在采暖期,随着颗粒物粒径变小,Pb、Cd的富集指数呈现逐渐增大的趋势;非采暖期则无此趋势。     

典型城市工业区TSP中重金属污染研究

以徐州市北郊工业区作为研究对象,探讨工业型城市大气总悬浮颗粒物中重金属元素的时空分布特征。监测结果表明,该区大气TSP中重金属污染较为严重,单个样品中重金属铅、锌、镉、铬、铜和锰的最高含量分别达350.9、1037.9、5.5、16.3、17.8、238.5mg/kg;元素浓度呈秋冬季偏高,夏秋季偏低的趋势;空间分布充分体现了与污染源地域分布的一致性。     

京津冀典型城市采暖季颗粒物浓度与元素分布特征

选择京津冀地区3个典型城市和从南至北的4个国家大气背景站作为研究对象,收集采暖季空气颗粒物PM2.5、PM10样品,微波消解-ICP-MS法分析了样品中的68种元素。结果表明,北京、天津、石家庄PM2.5和PM10日均质量浓度均高于国家二级标准限值和背景点,一元线性回归分析结果表明,PM10与PM2.5质量浓度呈线性相关,Na、Mg、Al、S、K、Ca、Fe质量浓度为0.1~10μg/m3,Si、P、Ti、Mn、Ni、Cu、Zn、Ba、Pb质量浓度为10~100 ng/m3,其他元素质量浓度为0.01~10 ng/m3或未检出。在元素构成上,S、Na、Al、K、Fe、Mg、Ca、P、Si等是主要元素,元素含量均大于1%。其他微量元素每种元素含量为0.1%~1%。14种重点防控重金属在PM2.5中的吸附显著高于PM10,主要来源于燃煤、燃油、工业排放、机动车尾气等。     

北京市生活垃圾中重金属元素污染特性调查

采用现场调研取样和理化分析检测的方法对北京市城区垃圾中重金属含量水平、主要污染元素和主要污染物进行测定,并在调查基础上提出北京市城区垃圾重金属污染的防治对策,为废弃物减量化、无害化与资源化提供依据。     

乌鲁木齐市大气PM2.5中重金属元素含量和富集特征

利用PM2.5／PM10便携式采样器采集了乌鲁木齐市5个功能区PM2.5,样品,用TAS-990石墨炉原子吸收光谱仪检测了PM2.5样品中Cd、Cu、Ni、Pb、Mn的含量。结果表明,乌鲁木齐大气PM2.5质量浓度变化趋势是冬季采暖盛期〉秋季采暖初期〉春季停暖初期〉夏季停暖期。参照《环境空气质量标准》（GB3095—2012）中的二级标准,采样期间卡子湾水泥厂区样品全部超标,其余4个采样点样品在冬季采暖盛期也全部超标,部分样品在非采暖期超标。富集因子法分析表明,乌鲁木齐市5个采样区PM2.5样品中Ni、Cu、Cd、Pb污染主要来自于人类活动,Mn则来源于地壳物质。     

苏州市区PM_(2.5)中元素污染特征

2014年使用EHM-X100型在线金属分析仪自动监测苏州市区大气PM2.5中Pb、Cu、K等24种元素质量浓度,并结合当地工业经济发展和降雨、土壤等环境状况对元素污染特征进行分析研究。结果表明:这24种元素的年均质量浓度在0.002μg/m3~0.834μg/m3之间,并总体呈现冬季质量浓度最高,春、秋季次之,夏季最低的变化趋势;Fe、Ca和Zn 3种元素在总质量浓度中占比较高,这可能与当地产业布局、建筑业及交通状况等有关,是人类活动所导致的污染。     

石家庄市大气颗粒物中有机碳和元素碳的季节变化特征

为了解石家庄市大气颗粒物中有机碳和元素碳的季节变化特征,对春、夏、秋、冬四季采集的PM_(10)、PM_(2.5)样品中的有机碳(OC)和元素碳(EC)进行了分析。结果表明,石家庄市PM_(10)、PM_(2.5)污染严重;PM_(10)、PM_(2.5)中ρ(OC)和ρ(EC)季节变化特征均为夏季春季秋季冬季。冬季PM_(10)中ρ(OC)和ρ(EC)分别为42.85和8.88μg/m~3;PM_(2.5)中ρ(OC)和ρ(EC)分别为41.2和8.59μg/m~3。PM_(2.5)中EC占比最高为3.9%,EC更容易在PM_(2.5)中富集;在四个季节中,冬季PM_(10)、PM_(2.5)中ρ(OC)/ρ(EC)为最高,分别为4.83和4.80,冬季取暖用燃煤加重了OC、EC的污染。冬季PM_(10)中二次有机碳ρ(SOC)为20.92μg/m~3,PM_(2.5)中ρ(SOC)为23.50μg/m~3。     

天津市颗粒物中元素化学特征及来源

2006年的8月—12月采集天津市PM2.5和PM10样品,分析了Na、Al等17种元素质量浓度及月变化特征,PM2.5中元素平均质量浓度为17.2μg/m3,占PM2.5的10.3%。微量元素Zn、Pb在PM10和PM2.5中含量较高,Cr、V、Ni、As等则在细粒子中有明显分布。用富集因子法分析发现,PM2.5中元素富集程度高于PM10。地壳元素除Ca外,均无明显富集,微量元素则呈现不同程度的富集,以Cd富集最为明显。颗粒物分析表明,土壤尘、燃煤、机动车尾气及化工行业是PM2.5中无机元素的主要来源。     

运城市区秋冬季大气PM2.5中重金属污染特征及健康风险评估

为了解山西省运城市大气细颗粒物（PM_2.5）中重金属的污染特征和来源及其健康风险,于2020年10月15日—2021年2月14日对运城市大气PM_2.5样品进行连续采集,使用微波消解-电感耦合等离子质谱法（ICP-MS）分析了样品中的铬（Cr）、锰（Mn）、镍（Ni）、铜（Cu）、锌（Zn）、砷（As）、镉（Cd）和铅（Pb）等8种重金属元素的质量浓度。结果表明,采样期间,ρ（PM_2.5）平均值为78.96μg/m³,采暖季ρ（PM_2.5）为（79.84±43.79）μg/m³,高于非采暖季（76.54±23.97）μg/m³,采暖季和非采暖季ρ（PM_2.5）均值均超过《环境空气质量标准》（GB 3095—2012）中的二级标准。富集因子法分析表明,Ni、Cu、Zn、As、Cd和Pb的富集因子均高于10,其中Cd元素的富集因子平均值达到1.089,表明受人为污染影响严重。主成分分析结果表明,运城市区秋冬季大气中重金属主要有3个来源,分别为混合燃烧源、机动车尾气源、工业排放源。健康风险评价结果显示,经手口摄入暴露强度最大,呼吸吸入暴露强度最小,皮肤接触暴露强度居中;儿童在3种暴露途径的总暴露剂量高于成人,儿童重金属暴露风险高于成人。各途径的非致癌风险强度叠加值＜1,表明非致癌风险较小;但As、Pb的非致癌风险相对较高。4种重金属的呼吸吸入途径致癌风险程度排序为：As＞Cr＞Cd＞Ni,单种重金属的致癌风险（TR）值以及重金属的总致癌风险（R）值均＜10^-6,表明本研究中重金属不具有致癌风险。     

电子垃圾回收地得克隆的污染水平及分布特征

对浙江某电子垃圾回收地水体、沉积物、土壤以及大气中得克隆（DP）的污染水平及分布特征进行了调查。结果表明,水、沉积物、土壤和大气样品中均检测出了 DP,分别为0．843～1．56 ng/L,0．185～7．03 ng/g干重,0．115～26．4 ng/g干重和11．2 pg/m3;该区域 DP分布特征表明电子垃圾的拆解和焚烧是环境中 DP的重要来源。     

隧道路面沥青摊铺过程空气中TSP和多环芳烃污染研究

分析了隧道沥青摊铺过程环境空气中的TSP及多环芳烃质量浓度。TSP用膜法,中流量采样器采样15 min,重量法分析;超声波萃取,高效液相色法分析多环芳烃。结果表明,摊铺机周围空气中TSP超过8 mg/m3,道路空气中TSP超过3 mg/m3;环境空气中苊烯等12种多环芳烃均有检出,苊烯和艹屈质量浓度较高,苯并[a]芘和二苯并[a,h]蒽质量浓度较低。苯并[a]蒽、苯并[a]芘和二苯并[a,h]蒽超标,对人体健康危害较大。建议加强相关行业PAHs的排放水平及其健康风险研究,制定相关限值标准和沥青摊铺过程环境空气的沥青烟监测方法标准。     

Analysis of Heavy Metals in the Endometrial Tissue Using Electron Microscope

Objective This study was done to estimate whether heavy metals in the air may affect endometrial chemical composition. Materials and Methods A total of 30 albino Wistar rats were employed and randomly divided into three groups. The rats of Group 1 and 2 were acutely and sub-chronically exposed to the gas form of heavy metals, respectively. Group 3 was used as a control group. Endometrial tissue worth of heavy metals of the groups was measured in through using scanning electron microscope. Results A statistically no significant difference was found for endometrial chemical composition of all of the heavy metals (chrome, manganese, iron, cobalt, nickel, zinc and lead) between group 1 and 2 (p > 0.05). On the other hand, there was statistically significant difference for all of the heavy metals between group 1 and group 3 (p < 0.05), while there was statistically significant difference for chrome, manganese, iron, cobalt and nickel (p < 0.05), but zinc and lead (p > 0.05) between group 2 and 3. Conclusion Air pollutants of Pb and Zn resulting mostly from combustion of fossil fuels and certain special industrial process in Kirikkale may be a risk factor for the high pregnancy loses by changing endometrial homeostasis.     

Monitoring of ambient particles and heavy metals in a residential area of Seoul, Korea

In this study, ambient TSP, PM10, and PM2.5 in a residential area located in the northern part of Seoul were monitored every other month for 1 year from April 2005 to February 2006. The monthly average levels of TSP, PM10, and PM2.5 had ranges of 71∼158, 40∼106, and 28∼43 μg/m³, respectively. TSP and PM10 showed highest concentration in April; this seems to be due to Asian dust from China and/or Mongolia. However, the fine particle of PM2.5 showed a relatively constant level during the monitoring period. Heavy metals in PM 10 and PM2.5, such as Cr, As, Cd, Mn, Zn and Pb, were also analysed during the same period. The monthly average concentrations of heavy metal in PM2.5 were Cr:1.9∼22.7 ng/m³; As:0.9∼2.5 ng/m³; Cd: 0.6∼7 ng/m³; Mn:6.1∼22.6 ng/m³; Zn: 38.9∼204.8 ng/m³, and Pb: 21.6∼201.1 ng/m³. For the health risk assessment of heavy metals in ambient particles, excess cancer risks were calculated using IRIS unit risk. As a result, the excess cancer risks of chromium, cadmium, and arsenic were shown to be more than one per million based on the annual concentration of heavy metals, and chromium showed the highest excess cancer risk in ambient particles in Seoul.     

唐山市空气中SO2与TSP污染状况分析

分析了唐山市从1988年至1992年大气中SO2和TSP的污染状况和变化规律，取得对该市环境管理的科学依据。     

Characterization, Source Identification and Apportionment of Selected Metals in TSP in an Urban Atmosphere

To understand the metal distribution characteristics in the atmosphere of urban Islamabad, total suspended particulate (TSP) samples were collected on daily 12 h basis, at Quaid-i-Azam University campus, using high volume sampler. The TSP samples were treated with HNO₃/HClO₄ based wet digestion method for the quantification of eight selected metals; Fe, Zn, Pb, Mn, Cr, Co, Ni and Cd by FAAS method. The monitoring period ran from June 2001 to January 2002, with a total of 194 samples collected on cellulose filters. Effects of different meteorological conditions such as temperature, relative humidity, wind speed and wind direction on selected metal levels were interpreted by means of multivariate statistical approach. Enhanced metal levels for Fe (930 ng/m³), Zn (542 ng/m³) and Pb (210 ng/m³) were found on the mean scale while Mn, Cr, Co and Ni emerged as minor contributors. Statistical correlation study was also conducted and a strong correlation was observed between Pb-Cr (r=0.611). The relative humidity showed some significant influence on atmospheric metal distribution while other meteorological parameters showed weak relationship with TSP metal levels. Regarding the origin of sources of heavy metals in TSP, the statistical procedure identified three source profiles; automobile emissions, industrial/metallurgical units, and natural soil dust. The metal levels were also compared with those reported for other parts of the world which showed that the metal levels in urban atmosphere of Islamabad are in exceedence than those of European industrial and urban sites while comparable with some Asian sites.     

Impact of poor solid waste management on ground water

Eight sediment cores recovered from Tamaki Estuary were analysed for Cu, Pb, Zn, and Cd using downward cored sub-samples. The results indicate a significant upward enrichment in heavy metals with the highest concentrations found in the uppermost 0–10 cm layer. Assessment of heavy metal pollution in marine sediments requires knowledge of pre-anthropogenic metal concentrations to act as a reference against which measured values can be compared. Pristine values for the cored sediments were determined from flat “base-line” metal trends evident in lower core samples. Various methods for calculating metal enrichment and contamination factors are reviewed in detail and a modified and more robust version of the procedure for calculating the degree of contamination is proposed. The revised procedure allows the incorporation of a flexible range of pollutants, including various organic species, and the degree of contamination is expressed as an average ratio rather than an absolute summation number. Comparative data for normalized enrichment factors and the modified degree of contamination show that Tamaki Estuary sediments have suffered significant systematic heavy metal contamination following catchment urbanization. Compared to baseline values the uppermost sediment layers show four-fold enrichment averaged across eight cores and four analysed metals.     

杨家幛子钼矿区土壤中重金属污染状况的评价

对杨家幛子钼矿区土壤重金属污染的情况进行了详细研究。选择土壤样本80个,采用HNO3-HF-HClO4混酸对土壤样品进行处理,运用等离子体发射光谱仪(ICP-AES)测定土壤样品中Pb、As、Hg、Cr、Cd、Zn、Cu、Ni、Mo的含量,全面系统地评价土壤重金属污染现状。结果表明,该矿区土壤重金属As、Cd和Hg污染较为严重,平均含量分别达154.13、74.92和3.06mg/kg。不同片区间存在明显差异,污染强度以矿山山沿污染最高,其次是运输区、选矿厂及矿区附近山地,内梅罗综合指数分别为59.98、59.33、52.14、42.44。     

Magnetic mapping of fly-ash pollution and heavy metals from soil samples around a point source in a dry tropical environment

The Singrauli region in the southeastern part of Uttar Pradesh, India is one of the most polluted industrial sites of Asia. It encompasses 11 open cast coalmines and six thermal power stations that generate about 7,500 MW (about 10% of India’s installed generation capacity) electricity. Thermal power plants represent the main source of pollution in this region, emitting six million tonnes of fly-ash per annum. Fly-ash is deposited on soils over a large area surrounding thermal power plants. Fly-ashes have high surface concentrations of several toxic elements (heavy metals) and high atmospheric mobility. Fly ash is produced through high-temperature combustion of fossil fuel rich in ferromagnetic minerals. These contaminants can be identified using rock-magnetic methods. Magnetic susceptibility is directly linked to the concentration of ferromagnetic minerals, primarily high values of magnetite. In this study, magnetic susceptibility of top soil samples collected from surrounding areas of a bituminous-coal-fired power plant were measured to identify areas of high emission levels and to chart the spatial distribution of airborne solid particles. Sites close to the power plant have shown higher values of susceptibility that decreases with increasing distance from the source. A significant correlation between magnetic susceptibility and heavy metal content in soils is found. A comparison of the spatial distribution of magnetic susceptibility with heavy-metal concentrations in soil samples suggests that magnetic measurements can be used as a rapid and inexpensive method for proxy mapping of air borne pollution due to industrial activity.     

高锰酸钾─硫酸─过硫酸钾消化冷原子荧光法测定总悬浮颗粒物中痕量汞

测定环境大气悬浮颗粒物中痕量汞，用４种消化液进行对比实验，其中高锰酸钾─硫酸─过硫酸钾混合液消化效果较好，用冷原子荧光测定操作简便，检测下限为０．０５μｇ／Ｌ，重复测定９个实际样品，相对标准偏差为１１．６％，变异系数为１０．４％，添加汞标准回收率为１０２％。