Performance assessment for municipal solid waste collection in Taiwan

Collecting municipal solid waste (MSW) is a major and expensive task for local waste management authorities, thus efficient MSW collection is a necessity. This study presents a procedure for developing an aggregate indicator (AI) to assess MSW collection efficiency based on multiple factors. The applicabilities of various key performance indicators (KPIs) are evaluated based on five selection criteria, and five KPIs are chosen to form the AI. The relative efficiencies of local MSW collection services are analyzed by the data envelopment analysis (DEA) method. A set of common weights for all five KPIs is then generated based on DEA results and four selection rules by modifying a previous approach. Finally, the proposed AI is applied to assess the MSW collection services provided by 307 local governments in Taiwan, and associated results are compared and discussed.     

Alternative treatments for the municipal solid waste and domestic sewage in Campinas,Brazil

The treatments of municipal solid waste (MSW) and the domestic sewage (DS) are critical issues of the current political and environment discussions. These concerns are due to the lack of dumping areas, the continuous increase of the population, and public health issues. The adequate treatment and management of MSW and DS can produce many benefits such as financial funds, heat and energy production, reduction of emissions and recuperation of water for reuse. Currently in Campinas MSW and DS are deposited in landfills or discharged into rivers and other sites. In the present study two scenarios are evaluated for the treatment of MSW and DS in Campinas: recycling with biological treatment and recycling with thermal treatment. The most suitable treatments for Campinas, based on the data from the present analysis and taking into consideration the local conditions, maximization of energy potential and environmental benefits, are incineration for the MSW and biological treatment for DS, both with energy recuperation. The main gains of this option are substantial environmental benefits, generated energy which can reach 18% of the total electrical energy consumed in Campinas while about 53% recuperation of the total amount of water treated for Campinas in 2010.     

Clean fuels from municipal solid waste for fuel cell buses in metropolitan areas

Increasing volumes of municipal solid waste (MSW) pose disposal problems for many cities. Costs are rising as landfilling becomes more difficult. The production of clean transportation fuels (methanol or hydrogen) from MSW is one economically and environmentally promising option for dealing with these problems. An attractive feature is that elimination of essentially all air pollutant emissions is inherent in the process. Current and future air emissions standards should be easily met. Methanol or hydrogen used in fuel cell vehicles (FCV) can help address problems of deteriorating urban air quality due to vehicle pollution and heavy dependence of the transport sector on imported petroleum. Buses are initial targets for commercial application of fuel cells. Coupled with FCVs, MSW could become a major transportation energy resource. For example, less than 25% of New York City's MSW supply would be sufficient to produce the methanol or hydrogen needed to fuel the entire city's bus fleet, if the buses were fuel cell powered. Estimated breakeven tipping fees required for hydrogen or methanol from MSW to compete with the cost of these fuels made from natural gas today are $52 to $89/raw tonne MSW for hydrogen and $64 to $104/raw tonne MSW for methanol (in 1991$), depending on the gasification technology considered. For comparison, the average tipping fee today in New York City is $74/tonne (1991$). Because of the high fuel economies expected for fuel cell buses, total lifecycle costs per bus-km could be lower than for conventional diesel-engine buses.     

FSILP: fuzzy-stochastic-interval linear programming for supporting municipal solid waste management

Although many studies on municipal solid waste management (MSW management) were conducted under uncertain conditions of fuzzy, stochastic, and interval coexistence, the solution to the conventional linear programming problems of integrating fuzzy method with the other two was inefficient. In this study, a fuzzy-stochastic-interval linear programming (FSILP) method is developed by integrating Nguyen's method with conventional linear programming for supporting municipal solid waste management. The Nguyen's method was used to convert the fuzzy and fuzzy-stochastic linear programming problems into the conventional linear programs, by measuring the attainment values of fuzzy numbers and/or fuzzy random variables, as well as superiority and inferiority between triangular fuzzy numbers/triangular fuzzy-stochastic variables. The developed method can effectively tackle uncertainties described in terms of probability density functions, fuzzy membership functions, and discrete intervals. Moreover, the method can also improve upon the conventional interval fuzzy programming and two-stage stochastic programming approaches, with advantageous capabilities that are easily achieved with fewer constraints and significantly reduces consumption time. The developed model was applied to a case study of municipal solid waste management system in a city. The results indicated that reasonable solutions had been generated. The solution can help quantify the relationship between the change of system cost and the uncertainties, which could support further analysis of tradeoffs between the waste management cost and the system failure risk.     

Assessing instruments for mixed household solid waste collection services in the Flemish region of Belgium

Instruments to reduce waste can be divided into three groups: first, pecuniary incentives; second, service level; finally, measurements stimulating prevention and waste reduction. Also specific characteristics of the community determine the amount of waste generated. We evaluate whether findings in literature on effectiveness of policy measures are valid for Belgium, specifically for the Flemish region. The policy mix instituted by the Flemish authorities in the ‘implementation plan household waste 2003–2007’ and implemented by local authorities, is assessed. Multiple regression analysis identifies those measurements having the greatest impact on household solid waste.We found an income elasticity of 0.326. Also the provided service level has a significant impact. Pecuniary incentives are effective instruments in reducing waste, with a price elasticity of −0.139. Furthermore, a higher percentage of direct costs, directly attributable to waste services, borne by households, reduces waste. A consequent implementation of the ‘polluter pays’ principle proves to be effective.     

Evaluation of municipal solid waste composting kinetics

Most modern municipal solid waste (MSW) composting operations have emphasized the enhancement of decomposition of the organic fraction of the waste to comply with strict environmental regulations. This can be achieved once the composting process kinetics are well understood. This study examined process kinetics through experimentation with bench-scale reactors under controlled composting conditions to show the interdependence between biological, chemical and physical factors during composting of MSW. The effects of temperature, moisture content, waste particle size and carbon to nitrogen (C/N) ratio on process kinetics were evaluated. The results obtained revealed that these factors should be carefully controlled in order to achieve optimum process performance. It has been found that the organic matter degradation during composting follows a first-order kinetic model.     

Options for management of municipal solid waste in New York City: a preliminary comparison of health risks and policy implications

Landfill disposal and waste-to-energy (WTE) incineration remain the two principal options for managing municipal solid waste (MSW). One critical determinant of the acceptability of these options is the different health risks associated with each. In this analysis relying on published data and exposure modeling, we have performed health risk assessments for landfill disposal versus WTE treatment options for the management of New York City's MSW. These are based on the realistic scenario of using a waste transfer station (WTS) in Brooklyn and then transporting the untreated MSW by truck to a landfill in Pennsylvania or using a WTE facility in Brooklyn and then transporting the resultant ash by truck to a landfill in Pennsylvania. The overall results indicate that the individual cancer risks for both options would be considered generally acceptable, although the risk from landfilling is approximately 5 times greater than from WTE treatment; the individual non-cancer health risks for both options would be considered generally unacceptable, although once again the risk from landfilling is approximately 5 times greater than from WTE treatment. If one considers only the population in Brooklyn that would be directly affected by the siting of either a WTS or a WTE facility in their immediate neighborhood, individual cancer and non-cancer health risks for both options would be considered generally acceptable, but risks for the former remain considerably higher than for the latter. These results should be considered preliminary due to several limitations of this study such as: consideration of risks only from inhalation exposures; assumption that only volume and not composition of the waste stream is altered by WTE treatment; reliance on data from the literature rather than actual measurements of the sites considered, assuming comparability of the sites. However, the results of studies such as this, in conjunction with ecological, socioeconomic and equity considerations, should prove useful to environmental managers, regulators, policy makers, community representatives and other stakeholders in making sound and acceptable decisions regarding the optimal handling of MSW.     

A two-stage support-vector-regression optimization model for municipal solid waste management - a case study of Beijing, China

In this study, a two-stage support-vector-regression optimization model (TSOM) is developed for the planning of municipal solid waste (MSW) management in the urban districts of Beijing, China. It represents a new effort to enhance the analysis accuracy in optimizing the MSW management system through coupling the support-vector-regression (SVR) model with an interval-parameter mixed integer linear programming (IMILP). The developed TSOM can not only predict the city's future waste generation amount, but also reflect dynamic, interactive, and uncertain characteristics of the MSW management system. Four kernel functions such as linear kernel, polynomial kernel, radial basis function, and multi-layer perception kernel are chosen based on three quantitative simulation performance criteria [i.e. prediction accuracy (PA), fitting accuracy (FA) and over all accuracy (OA)]. The SVR with polynomial kernel has accurate prediction performance for MSW generation rate, with all of the three quantitative simulation performance criteria being over 96%. Two cases are considered based on different waste management policies. The results are valuable for supporting the adjustment of the existing waste-allocation patterns to raise the city's waste diversion rate, as well as the capacity planning of waste management system to satisfy the city's increasing waste treatment/disposal demands.     

Effects of planned expansion of waste incineration in the Swedish district heating systems

Recent targets for reduced amounts of waste to landfills in Sweden will result in a large increase in waste incineration with recovery of energy, used primarily for district heating. The aim of this study is to investigate what changes in the usage of other fuels and technologies for district heat production would be caused by this increase. A questionnaire was sent out to the largest district heating companies, and simulations in an energy systems model were carried out. The analysis shows that increased waste incineration reduces the demand for other fuels, especially biomass, for district heat production. The effects include reductions in operating hours as well as the avoidance or postponement of investments in new plants for district heat production. Increased waste incineration will also lead to a greater use of district heating in Sweden.     

一种城市生活垃圾产量预测的改进方法

将灰色系统理论与多元线性回归分析方法相结合，是研究城市生活垃圾产量预测的一种改进方法。以成都市为例。运用灰色关联度分析确定影响城市生活垃圾产量的4个主要因子：城市非农业人口、气化率、城市人均消费性支出、清扫面积。利用GM(1，1)模型预测上述4个因子的变化情况。建立一个包含这些因子的垃圾产量的多元线性回归分析预测模型，并对2004～2010年的垃圾产量进行预测。该模型预测精度高，实用性强，可为垃圾产量预测提供一种可靠的方法。     

Value reclamation from informal municipal solid waste management: green neoliberalism and inclusive development in Lagos,Nigeria

ABSTRACT

Lagos is undoubtedly the cultural capital and economic hub of the West African sub-region. The challenge of municipal solid waste management (MSWM) in the megacity has remained intractable due partly to the increasing rate of population growth. While solid waste policy reforms, investments, and management practices in Lagos are in the upswing in the formal economy, the role of the informal economy in engendering sub-regional material linkages and livelihoods remain unexplored. Adopting a multi-stakeholder approach and data from interviews, this study critically examines how value reclamation from informal MSWM advances green neoliberalism and inclusive development. It shows that while informal transboundary trade of recyclable materials in the West African sub-region have previously been left out of analyses of MSWM in Lagos, the informal economy of waste and new investments in MSWM have neoliberal underpinnings beyond the megacity scale. The paper concludes that integrating the informal economy in framing MSWM policy in the megacity offers scope for evolving an inclusive development strategy while also enabling sustainable MSWM in the post-2015 era.     

An approach to tackling the environmental and health impacts of municipal solid waste disposal in developing countries

Indiscriminate disposal of municipal solid waste in developing countries poses severe environmental and health threats. The study proposes a new method for dealing with these problems. The hybrid structural interaction matrix (HSIM) was used to prioritise major identifiable environmental health factors arising from improper solid waste disposal. The simplistic resource allocation model was adopted to ensure optimality in the allocation of resources to prioritised factors. The study indicates that tackling environmental health impacts from the most prioritised negative disposal factors through optimal allocation of resources, will either reduce or eliminate the impacts associated with subsequent less prioritised factors that are direct consequences of the highly prioritised negative factors. The method proposed will aid decision makers in knowing which set of systemic factors are to be given preference and to what extent at given periods in time.     

Variation in some chemical parameters and organic matter in soils regenerated by the addition of municipal solid waste

The organic fraction of a municipal solid waste was added in different doses to an eroded soil formed of loam and with no vegetal cover. After three years, the changes in macronutrient content and the chemical-structural composition of its organic matter were studied. The addition of the organic fraction from a municipal solid waste had a positive effect on soil regeneration, the treated soils being covered with spontaneous vegetation from 1 yr onwards. An increase in electrical conductivity and a fall in pH were noted in the treated soils as were increases in macronutrients, particularly N and available P and the different carbon fractions. Optical density measurements of the organic matter extracted with sodium pyrophosphate showed that the treated soils contained an organic matter with less condensed compounds and with a greater tendency to evolve than the control. A pyrolysis-gas chromatography study of the organic matter extracted with pyrophosphate showed large quantities of benzene both in the treated soils and control; pyrrole was also relatively abundant, although this fragment decreased as the dose rose. Xylenes and pyridine were present in greater quantities in the control and furfural in the treated soils. Three years after addition to the soil, the organic matter had a higher proportion of fragments derived from aromatic compounds and a smaller proportion derived from hydrocarbons. Similarity indices showed that, although the added and newly formed organic matter 3 yr after addition continued to differ from that of the original soil and to be more mineralizable, the transformations it has undergone made it more similar to the original organic matter of the soil than it was at the moment of being added.     

Assessment of the greenhouse effect impact of technologies used for energy recovery from municipal waste: A case for England

Waste management activities contribute to global greenhouse gas emissions approximately by 4%. In particular the disposal of waste in landfills generates methane that has high global warming potential. Effective mitigation of greenhouse gas emissions is important and could provide environmental benefits and sustainable development, as well as reduce adverse impacts on public health. The European and UK waste policy force sustainable waste management and especially diversion from landfill, through reduction, reuse, recycling and composting, and recovery of value from waste. Energy from waste is a waste management option that could provide diversion from landfill and at the same time save a significant amount of greenhouse gas emissions, since it recovers energy from waste which usually replaces an equivalent amount of energy generated from fossil fuels. Energy from waste is a wide definition and includes technologies such as incineration of waste with energy recovery, or combustion of waste-derived fuels for energy production or advanced thermal treatment of waste with technologies such as gasification and pyrolysis, with energy recovery. The present study assessed the greenhouse gas emission impacts of three technologies that could be used for the treatment of Municipal Solid Waste in order to recover energy from it. These technologies are Mass Burn Incineration with energy recovery, Mechanical Biological Treatment via bio-drying and Mechanical Heat Treatment, which is a relatively new and uninvestigated method, compared to the other two. Mechanical Biological Treatment and Mechanical Heat Treatment can turn Municipal Solid Waste into Solid Recovered Fuel that could be combusted for energy production or replace other fuels in various industrial processes. The analysis showed that performance of these two technologies depends strongly on the final use of the produced fuel and they could produce GHG emissions savings only when there is end market for the fuel. On the other hand Mass Burn Incineration generates greenhouse gas emission savings when it recovers electricity and heat. Moreover the study found that the expected increase on the amount of Municipal Solid Waste treated for energy recovery in England by 2020 could save greenhouse gas emission, if certain Energy from Waste technologies would be applied, under certain conditions.     

Inclusive municipal solid waste management policy in Nigeria: engaging the informal economy in post-2015 development agenda

The problem of municipal solid waste has remained intractable in Nigeria despite the state’s central role in municipal solid waste management (MSWM). Policy and reforms of the MSWM system have invariably excluded the informal economy, with this exclusion frequently reinforced by uncritical implementation of neo-liberal development policies. Yet, the informal economy fortuitously remains active in solid waste collection, recycling, and disposal. This article is the aggregate outcome of an 8-year multi-stakeholder engagement in MSWM in Nigerian cities. It draws on insights from first-hand qualitative engagement with informal waste workers, interviews with key stakeholders, policy documents, and relevant literature to situate the Nigerian informal waste economy within current international development discourse. While highlighting the implications of social acceptance and inclusion of the waste economy in post-2015 MSWM and development policy, the study notes the lack of an articulate policy on MSWM in Nigeria and canvasses a specific policy to integrate the ubiquitous informal waste economy in MSWM. The paper suggests that inclusion per sé is central to the sustainable development goals (SDGs), and argues that an inclusive MSWM policy in Nigeria is desirable as it maps onto the SDGs which aim to improve lives in the post-2015 development era.     

Municipal solid waste production and composition in Finland—Changes in the period 1960–2002 and prospects until 2020

Waste reduction was recognised as the main goal of waste management policy in the EU in the 1990s. Although knowledge of past waste generation is essential for effective waste reduction policy there are no comprehensive statistics on the past development of municipal solid waste (MSW) production. MSW management is currently under turmoil in many EU countries as the requirements of the EC landfill directive (1999/31/EC) are set into force. In this study, the production and composition of MSW in Finland between 1960 and 2002 is presented using historical data. The impact of population, affluence and technology on MSW production are analysed using the IPAT equation and three scenarios are constructed until year 2020. The results are compared with national future targets on MSW production. Production of MSW increased in Finland until 1990, declined to year 1997, increased to 2000 and then declined again. The share of organic and plastic waste increased over the study period while the share of paper and cardboard declined. The results suggest that so far national targets on MSW reduction have been set fairly low. Moreover, our scenarios depict a wide range of future MSW production, even though the time horizon is not longer than 15 years into the future. In order to narrow this range, continuous improvement of the statistics of MSW is essential.     

A generic comparison of the airborne risks to human health from landfill and incinerator disposal of municipal solid waste

A comparison of the potential risks to human health from municipal solid waste (MSW) incineration and landfill on a generic basis is attempted. For this purpose a 'worst case' approach is adopted and a number of assumptions regarding the size and activities of each waste disposal method are made. The airborne pollutants measured for an incinerator are different from those for a landfill with or without gas collection. However, based on the available information it appears that as far as airborne pollution is concerned, landfill sites without gas collection pose a potentially higher generic risk to human health than MSW incinerators performing to Environmental Agency (UK) standards. This analysis cannot be used to replace specific evaluations for a particular incinerator or a landfill site because local conditions can have a very large impact on the magnitude of risks involved.     

Overview of non-hazardous solid waste in the small island state of Mauritius

In Mauritius, solid waste disposal has been a cause for concern since the 1980s. Currently, there is no segregation of waste and some 1200 tonnes of solid waste are generated daily by the 1.24 million inhabitants of the island. As processes such as recycling and composting are still in their infancy stage, most of the waste generated have to be disposed of at the sole landfill. The solid waste management practices of 1980s and early 1990s are no longer compatible with the changing composition and quantity of wastes now generated. As a result, there is an urgency to review the whole waste management system and come forward with sustainable solutions.This paper presents an overview of the disposal of non-hazardous solid waste in Mauritius and provides recommendations for improving the current disposal system.     

A mixed integer linear programming model for optimisation of organics management in an integrated solid waste system

In this paper, the authors propose a mixed integer linear programming model for designing an Integrated Solid Waste Management System (ISWMS) to meet specific economic goals. The model refers to a set of municipalities, known as ‘local basin’, which have to share a common waste management system. At the municipal level the model allows for an identification of the optimal collection service option; at the local basin level, the model provides the optimal waste flow appropriate to the collection service option of each municipality. The model has been applied to a full-scale case study of an area located in southeast Italy. A scenario analysis was carried out to investigate alternative municipal solid waste management options, which fundamentally differ in the organic flow mass rate to be either collected and composted or landfilled. Findings show that an increase in the cost of landfilling determines the optimal collection scenario and the configuration plants tend to recover higher rates of organics in separate collection and thus higher refuse derived fuel productions. The results obtained validate the application of the model in both the strategic planning and operational phases, by supporting public administrators at both municipality and local basin level in decision making and evaluation of technical and economic performances of ISWMSs.     

The impact of the European landfill directive on waste management in the United Kingdom

The European Union Landfill Directive calls on member states to reduce the amount of biodegradable municipal solid waste disposed of to landfill. In addition, national waste strategies will require the constituent parts of the United Kingdom to achieve increased household waste recycling and recovery rates. Both these measures will require the development of the infrastructure to support national high-intensity recycling and composting schemes and the construction of at least 35 new municipal waste to energy incinerators. Before plans can be developed for meeting the targets several areas relating to municipal solid waste need to be clarified. Depending on the definition of municipal solid waste, its composition and likely future growth rates the number of incinerators required could be up to 170.