Sorption of naphthoic acids and quinoline compounds to estuarine sediment

The sorption of 16 ionizable organic compounds (IOCs) to an estuarine sediment was measured in synthetic estuarine water as a function of IOC concentration (1-100 microM) at fixed ionic strength (0.4 M), pH (7.6), and sediment concentration (0.018 g sediment kg(-1) suspension). Of the 16 IOCs, 11 were naphthoic acids and five were quinoline compounds. The linear sorption distribution coefficient (Kd) was used to correlate sorption to IOC physicochemical and molecular characteristics. With respect to naphthoic acid, sorption increased with the addition of ortho-substituent groups and with increasing chain length of the 1-acid group, and the greatest increase occurred with ortho-hydroxyl, carbonyl, and carboxyl groups. With respect to quinoline, sorption decreased with substituent group addition (except for nitro group) and with additional heterocyclic N atoms. For the naphthoic acids, log Kd exhibited a positive correlation with water solubility (log Sw) indicative of sorption primarily to mineral surfaces under the solution chemistry. For the quinoline compounds, log Kd exhibited a negative correlation with log Sw and a positive correlation with n-octanol/water partition coefficient (log K(OW)) indicative of sorption primarily to organic matter. For both compounds, poor or no correlations were established between log Kd and acid dissociation constant (pKa1), and between log Kd and a variety of molecular connectivity indexes. The results from this study demonstrate that the sorption of IOCs differ depending on their backbone structure and may differ between parent compound and ionizable degradation product.     

Sorption and degradation of imidacloprid in soil and water

Imidacloprid, the major component of many widely used insecticide formulations, is highly persistent in soils. In this study, the sorption of imidacloprid by six soils as well as its photodegradation and hydrolysis in water were studied. The soils differed significantly in organic matter content and other physical and chemical properties. Sorption increased with increasing soil organic matter content but was not significantly correlated with other soil properties. Removal of organic matter via H2O2 oxidation decreased the sorption. By normalizing the Freundlich coefficients (Kf) to organic matter contents, the variability in obtained sorption coefficient (Kom) was substantially reduced. These results indicate that soil organic matter was the primary sorptive medium for imidacloprid. The low heat of sorption calculated from Kom suggests that partition into soil organic matter was most likely the mechanism. The photodegradation and hydrolysis of imidacloprid in water followed pseudo-first-order kinetics; however, the latter process needed a six-time-higher activation energy. While both processes produced the same main intermediate, they occurred via different pathways. The hydrolysis of imidacloprid was not catalyzed by the high interlayer pH in the presence of metal-saturated clays, which appeared to result from the lack of the pesticide adsorption in the interlayers of clays.     

Sorption of nonpolar neutral organic compounds to humic acid-coated sands: contributions of organic and mineral components

The contributions of organic matter and the mineral surface to the overall sorption of six nonpolar neutral organic compounds (1,2,4-trichlorobenzene, 1,4-dichlorobenzene, chlorobenzene, m-xylene, toluene, benzene) by five humic acid (HA)-coated sands with different fractions of organic carbon (f(oc)) ranging from 0.024% to 0.154% were evaluated on the basis of measured data and four different sorption models. Sorption of all six sorbates to both uncoated and heated sands was nearly linear due to the coverage of hydrophilic mineral surface with the ordered vicinal water region. Sorption of all six sorbates to the HA-coated sands was also essentially linear, and resulted from a combination of sorption to both organic matter and the mineral surface, with the dominance of either contribution depending on the properties of the sorbents (e.g., f(oc)) and the sorbates (e.g., K(ow)). A proposed two-component model for sorption including blocking effect was appropriate for quantifying the contributions of organic matter and the mineral surface to the overall sorption. However, conventional sorption models considering the contributions of both organic matter and the mineral surface provided essentially as good agreement between predicted and measured distribution coefficients as the more complicated, two-component model for sorption that takes into account mineral surface blocking by HA.     

Sorption of weak organic acids in soils: clofencet, 2,4-D and salicylic acid.

The sorption behaviour of a new wheat hybridising agent (clofencet, 2-4-(chlorophenyl)-3-ethyl-2,5-dihydro-5-oxopyridazine-4-carboxylic acid) was investigated in batch equilibrium experiments and compared to that of two other organic acids (2,4-D and salicylic acid). Sorption coefficients Kd for the three compounds were determined in 18 Cambisols and Ferralsols. Kd values for clofencet were 0.3-9.4 l/kg for Cambisols and 2.1-68 l/kg for Ferralsols. Sorption of clofencet was strongly related statistically to that of salicylic acid. Sorption of clofencet and salicylic acid decreased exponentially with increasing solution pH in Cambisols whereas a bell-shaped curve was obtained for the sorption of salicylic acid in Ferralsols. Sorption of 2,4-D (2,4-dichlorophenoxyacetic acid) was not statistically related to the pH of the different soils. Positively charged oxide surfaces were shown to play a significant role in the sorption of clofencet and salicylic acid. The use of simple correlation and multiple linear regressions suggested that the main sorption mechanisms of clofencet in soils were likely to be ligand exchange on oxide surfaces and, to a lesser extent, cation bridging. Differences in the sorption behaviour of clofencet/salicylic acid and 2,4-D might be attributed to the possibility of the two former compounds forming bidentate complexes with metals.     

Sorption and photolysis studies in soil and sediment of the herbicide napropamide

The influence of soil and sediment composition on sorption and photodegradation of the herbicide napropamide [N,N-diethyl-2-(1-naphthyloxy)propionamide] was investigated. Five soils and one sediment were selected for this study and the clay fractions were obtained by sedimentation. Sorption-desorption was studied by batch equilibration technique and photolysis in a photoreactor emitting within 300-450 nm wavelength with a maximum at 365 nm. Sorption increased with clay content and was not related to organic matter content. High irreversibility of sorption was related to the greater montmorillonite content. The presence of soil or sediment reduced photolysis rate due to screen effect and this process did not depend on solid composition but on particle size distribution.     

Sorption of 3,4-dichloroaniline on four contrasting Greek agricultural soils and the effect of liming

Sorption of 3,4-dichloroaniline (3,4-DCA) on four typical Greek agricultural soils, with distinct texture, organic matter content and cation exchange capacities, was compared by using sorption isotherms and the parameters calculated from the fitted Freundlich equations. The sorption process of 3,4-DCA to the soil was completed within 48-72 h. The 3,4-DCA sorption on all soils was well described by the Freundlich equation and all sorption isotherms were of the L-type. The sandy clay loam soil with the highest organic matter content and a slightly acidic pH was the most sorptive, whereas the two other soil types, a high organic matter and neutral pH clay and a low organic matter and acidic loam, had an intermediate sorption capacity. A typical calcareous soil with low organic matter had the lowest sorption capacity which was only slightly higher than that of river sand. The 3,4-DCA sorption correlated best to soil organic matter content and not to clay content or cation exchange capacity, indicating the primary role of organic matter. The distribution coefficient (K(d)) decreased with increasing initial 3,4-DCA concentration and the reduction was most pronounced with the highly sorptive sandy clay loam soil, suggesting that the available sorption sites of the soils are not unlimited. Liming of the two acidic soils (the sandy clay loam and the loam) raised their pH (from 6.2 and 5.3, respectively) to 7.8 and reduced their sorption capacity by about 50 %, indicating that soil pH may be the second in importance factor (after organic matter) determining 3,4-DCA sorption.     

Carbendazim sorption-desorption in Vietnamese soils

Four Vietnamese soils (denoted AG, CT, ST and TG) which differed with respect to pH (pH 2.9-5.4), clay (17-50%) and organic matter (0.3-9.8%) content, were selected for sorption and desorption studies of carbendazim using the batch equilibration technique. Sorption increased with increasing organic carbon (OC) and clay content. Kd values for carbendazim sorption on AG, CT, ST, TG soils at initial concentration of 20 microg/g were 12.5, 127, 8.1 and 9.6 ml/g, respectively. The OC partition coefficients (Koc) for AG, CT, ST and TG were 1140, 1300, 2700 and 960 ml/g, respectively. Carbendazim was strongly sorbed and the binding was less reversible in the acid sulfate soil (CT), than in the other soils. The CT soil had both the highest OC content (9.8%) and the highest clay content (49.8%). The influence of pH on carbendazim sorption was studied in the ST and CT soils. Sorption of carbendazim by the sandy ST soil (OC 0.3%; clay content 26.3%) increased as the pH decreased, while sorption of carbendazim by the CT soil decreased as pH decreased.     

Determination of the distribution coefficient (log Kd) of oxytetracycline,tylosin A,olaquindox and metronidazole in manure

Olaquindox (log Kow = -2.3) and metronidazole (log Kow = -0.1) both have low tendencies to sorp to particles in manure. This corresponds with the negative log Kow values of these antibiotics. Tylosin (log Kow = 1.63) and oxytetracycline (log Kow = -1.12) sorp relatively strongly to the manure particles and have log Kd values between 1.5 and 2.0. The tendency to bind to manure was ranked after increasing binding as follows: metronidazole < olaquindox < tylosin A and oxytetracycline. This order of ranking is consistent with results of sorption in soil. Our experiments illustrate that for some antibacterial agents estimation of the partitioning coefficients, Kd, cannot be made from Kow and f(oc) alone. Sorption of oxytetracycline to manure is much higher than expected from the negative log Kow value of the compound. It is believed that sorption of oxytetracycline to manure is influenced by ionic binding to divalent metal ions as such Mg2+ and Ca2+ as well as other charged compounds in the matrix. Binding of oxytetracycline to soil is stronger than the binding to manure. This is most likely due to the strong mineral related metal complexes formed between soil, metal ion and oxytetracycline. These complexes are not known to exist in manure. The relatively strong sorption of tylosin A to manure corresponds with data found for soil sorption of tylosin. Tylosin has a log Kow value of 2.5, thus it is not surprising that this drug binds strongly to manure.     

Comparison of nonideal sorption formulations in modeling the transport of phthalate esters through packed soil columns

Sorption of dimethyl phthalate (DMP), diethyl phthalate (DEP) and dipropyl phthalate (DPP) to two soil materials that vary in organic matter content was investigated using miscible displacement experiments under saturated flow conditions. Generated breakthrough curves (BTCs) were inversely simulated using linear, equilibrium sorption (LE), nonlinear, equilibrium sorption (NL), linear, first-order nonequilibrium sorption (LFO), linear, radial diffusion (LRD), and nonlinear, first-order nonequilibrium sorption (NFO) models. The Akaike information criterion was utilized to determine the preferred model. The LE model could not adequately describe phthalate ester (PE) BTCs in higher organic matter soil or for more hydrophobic PEs. The LFO and LRD models adequately described the BTCs but a slight improvement in curve-fitting was gained in some cases when the NFO model was used. However, none of the models could properly describe the desorptive tail of DPP for the high organic matter soil. Transport of DPP through this soil was adequately predicted when degradation or sorption hysteresis was considered. Using the optimized parameter values along with values reported by others it was shown that the organic carbon distribution coefficient (K(oc)) of PEs correlates well with the octanol/water partition coefficient (K(ow)). Also, a strong relationship was found between the first-order sorption rate coefficient normalized to injection pulse size and compound residence time. A similar trend of timescale dependence was found for the rate parameter in the radial diffusion model. Results also revealed that the fraction of instantaneous sorption sites is dependent on K(ow) and appears to decrease with the increase in the sorption rate parameter.     

Competitive sorption of organic contaminants in chalk

In the Negev desert, Israel, a chemical industrial complex is located over fractured Eocene chalk formations where transfer of water and solutes between fracture voids and matrix pores affects migration of contaminants in the fractures due to diffusion into the chalk matrix. This study tests sorption and sorption competition between contaminants in the chalk matrix to make it possible to evaluate the potential for contaminant attenuation during transport in fractures. Single solute sorption isotherms on chalk matrix material for five common contaminants (m-xylene, ametryn, 1,2-dichloroethane, phenanthrene, and 2,4,6-tribromophenol) were found to be nonlinear, as confirmed in plots of Kd versus initial solution concentration. Over the studied concentration ranges, m-xylene Kd varied by more than a factor of 100, ametryn Kd by a factor of 4, 1,2-dichloroethane Kd by more than a factor of 3, phenanthrene Kd by about a factor of 2, and 2,4,6-tribromophenol Kd by a factor of 10. It was earlier found that sorption is to the organic matter component of the chalk matrix and not to the mineral phases (Chemosphere 44 (2001) 1121). Nonlinear sorption isotherms indicate that there is at least some finite sorption domain. Bi-solute competition experiments with 2,4,6-tribromophenol as the competitor were designed to explore the nature of the finite sorption domain. All of the isotherms in the bi-solute experiments are more linear than in the single solute experiments, as confirmed by smaller variations in Kd as a function of initial solution concentration. For both m-xylene and ametryn, there is a small nonlinear component or domain that was apparently not susceptible to competition by 2,4,6-tribromophenol. The nonlinear sorption domain(s) is best expressed at low solution concentrations. Inert-solvent-normalized single and bi-solute sorption isotherms demonstrate that ametryn undergoes specific force interactions with the chalk sorbent. The volume percent of phenanthrene sorbed at the liquid solubility limit is calculated to be 13% v:v in both the single and bi-solute experiments. This value exceeds what may be reasonably interpreted as partitioning of phenanthrene into organic matter, despite the relative linearity of the phenanthrene sorption isotherm (compared with other compounds) in both single and bi-solute systems.     

Sorption mechanism of DDT from aqueous phase

Sorption is one among the many techniques available for the removal of organic materials from potable water and waste water. Use of locally available Wood Charcoal (WC) is essential in place of costly activated charcoal to make the process more economical and lucrative. The vital objective of this investigation was to assess the performance of WC for the removal of DDT from the aqueous phase. The influence of important factors like, particle size, pH, and time of contact, which affects the sorption process was studied in this investigation using batch experiments. The removal kinetics were carried out under the temperature 27 degrees +/- 1 degrees C (room temperature) and the sorption kinetics constants were evaluated. Sorption equilibria study has also been carried out to develop the Freudlich's sorption isotherm equation from which the ultimate sorption capacity of WC for sorption of DDT was calculated.     

Sorption and desorption kinetics of diuron, fluometuron, prometryn and pyrithiobac sodium in soils

The sorption and desorption characteristics of four herbicides (diuron, fluometuron, prometryn and pyrithiobac-sodium) in three different cotton growing soils of Australia was investigated. Kinetics and equilibrium sorption and desorption isotherms were determined using the batch equilibrium technique. Sorption was rapid (> 80% in 2 h) and sorption equilibrium was achieved within a short period of time (ca 4 h) for all herbicides. Sorption isotherms of the four herbicides were described by Freundlich equation with an r2 value > 0.98. The herbicide sorption as measured by the distribution coefficient (Kd) values ranged from 3.24 to 5.71 L/kg for diuron, 0.44 to 1.13 L/kg for fluometuron, 1.78 to 6.04 L/kg for prometryn and 0.22 to 0.59 L/kg for pyrithiobac-sodium. Sorption of herbicides was higher in the Moree soil than in Narrabri and Wee Waa soils. When the Kd values were normalised to organic carbon content of the soils (Koc), it suggested that the affinity of the herbicides to the organic carbon increased in the order: pyrithiobac-sodium < fluometuron < prometryn < or = diuron. The desorption isotherms were also adequately described by the Freundlich equation. For desorption, all herbicides exhibited hysteresis and the hysteresis was stronger for highly sorbed herbicides (diuron and prometryn) than the weakly sorbed herbicides (fluometuron and pyrithiobac-sodium). Hysteresis was also quantified as the percentage of sorbed herbicides which is not released during the desorption step (omega = [nad/nde - 1] x 100). Soil type and initial concentration had significant effect on omega. The effect of sorption and desorption properties of these four herbicides on the off-site transport to contaminate surface and groundwater are also discussed in this paper.     

Sorption of small metabolites of nonylphenol polyethoxylates in single and complex systems on aquatic suspended particulate matter

Sorption of nonylphenol (NP), nonylphenol monoethoxylate (NP1EO) and nonylphenol diethoxylate (NP2EO) as well as their binary and ternary mixtures were studied and compared on three simulated suspended particulate matters (SPMs). Sorption dynamics of NP on the three SPMs could be divided into two phases, the rapid sorption phase and the slow sorption phase. A third phase, 'apparent desorption' occurred before the slow sorption phase for NP1EO and NP2EO as well as for all mixtures. Initial sorption rate increased with the OC% content of the SPMs. At low concentration, the sorption of NP, NP1EO and NP2EO (only at low concentration for 3# SPM) followed linear isotherm on the three SPMs. The linear Kd value of NP or NP1EO increased with the OC% content of SPM. In mixtures, sorption of NP, NP1EO and NP2EO increased significantly, and a 'critical point', after which sorption increased significantly, was observed in certain sorption isotherms.     

Sorption of organic contaminants in a fractured chalk formation

Sorption capability of bedrock components from a fractured chalk province was evaluated using ametryn, phenanthrene, m-xylene, 2,4,6-tribromophenol, and 1,2-dichloroethane. Sorption isotherms for the four aromatic compounds were nonlinear on gray (unoxidized) chalk. Over the studied solution ranges, the distribution coefficient decreased by factor of 3 for phenanthrene and m-xylene, a factor 4 for ametryn, and by an order of magnitude for 2,4,6-tribromophenol. In contrast, 1,2-dichloroethane displayed a linear isotherm. The importance of polar interactions for ametryn sorption was evaluated by normalizing sorption to an "inert" solvent, n-hexane. n-Hexane-normalized sorption of ametryn was much greater than that of phenanthrene, presumably due to ametryn participation in hydrogen bonding interactions. In sharp contrast to sorption to gray chalk, sorption to white (oxidized) chalk is 100- to 1000-fold lower at any given solution concentration. The much greater sorption on gray chalk cannot be explained by specific surface area, clay content, or organic matter content; thus, the nature of the organic matter is considered to control sorption in the chalk samples. Gray chalk sorption capacity estimates for ametryn and 2,4,6-tribromophenol are similar, which, together with evidence of competition for sorption sites, suggests that the limited capacity sorption domain for both compounds is similar.     

Sorption of ametryn and imazethapyr in twenty-five soils from Pakistan and Australia.

Sorption of ametryn and imazethapyr in 25 soils from Pakistan and Australia was investigated using the batch method. The soils varied widely in their intrinsic capacities to sorb these herbicides as shown by the sorption coefficients, Kd, which ranged from 0.59 to 47.6 for ametryn and 0.02 to 6.94 for imazethapyr. Generally the alkaline soils of Pakistan had much lower Kd values of both herbicides than the soils of Australia. Both soil pH and soil organic carbon (SOC) were correlated significantly with the sorption of ametryn, whereas only soil pH was strongly correlated with imazethapyr sorption. No correlation was found between Kd values of the herbicides and the clay contents of the soils. Multiple regression analysis showed that Kd values were better correlated (r2=0.94 and 0.89 for ametryn and imazethapyr, respectively) if SOC and pH were simultaneously taken into account. The study indicated that sorption of these herbicides in the alkaline soils of Pakistan was low and consequently there is considerable risk of groundwater contamination.     

Sorption of fipronil and its metabolites on soils from South Australia

This paper reports on the sorption of fipronil [(+/-)-5-amino-1-(2,6-dichloro-alpha,alpha,alpha-trifluoro-p-tolyl)-4-trifluoromethyl-sulfinylpyrazole-3-carbonitrile] and its two main metabolites, desulfynil and sulfide derivatives on a range of soils from South Australia. The Freundlich sorption coefficient (Kf) values for fipronil on the soils ranged from 1.94 to 4.84 using a 5% acetonitrile/water mixture as the soil solution. Its two metabolites had a higher sorption affinity for soils, with Kf values ranging from 11.09 to 23.49 for the sulfide derivative and from 4.70 to 11.77 for the desulfynil derivative. Their sorption coefficients were found to be better related to the soil organic carbon than clay content. The presence of cosolvents in soil solutions had a significant influence on the sorption of fipronil. The Freundlich sorption coefficients showed a log linear relationship with the fractions of both acetonitrile and methanol in solutions. The sorption coefficient of fipronil on Turretfield soil in the aqueous solution was estimated to be from 13.80 to 19.19. Methanol had less effect on the sorption of fipronil than acetonitrile. The Kd values for fipronil on the eight soils using a 5% methanol/water mixture were from 5.34 to 13.85, which reflect more closely the sorption in the aqueous solution. The average Koc value for fipronil on the eight South Australian soils was calculated to be 825+/-214.     

Sorption of isoxaflutole diketonitrile degradate (DKN) and dicamba in unsaturated soil

When analyzing the sorption characteristics of weakly sorbing or labile pesticides, batch methods tend to yield a high margin of error attributable to errors in concentration measurement and to degradation, respectively. This study employs a recently developed unsaturated transient flow method to determine the sorption of isoxaflutole's herbicidally active diketonitrile degradate (DKN) and dicamba. A 20-cm acrylic column was packed with soils with varied texture that had been uniformly treated with 14C-labeled chemical.The antecedent solution herbicide in equilibrium with sorbed phase herbicide was displaced by herbicide-free water, which was infiltrated into the column. Sorption coefficients, Kd, were obtained from a plot of total herbicide concentration in the soil versus water content in the region where the antecedent solution accumulated. DKN Kd values were approximately 2-3 times (average Kd = 0.71 L kg-1) greater using the unsaturated transient flow method as compared to the batch equilibration method in clay loam (Kd = 0.33 L kg-1), but similar for the two methods in sand (0.12 vs 0.09 L kg-1) soils. Dicamba Kd values were 3 times greater using the unsaturated transient flow method as compared to the batch equilibration method in the clay loam soil (0.38 vs 0.13 L kg-1), however, the Kd values were the same for the two methods in the sand (approximately 0.06 L kg-1). This demonstrates that to determine sorption coefficients for labile hydrophilic pesticides, an unsaturated transient flow method may be a suitable alternative to the batch method. In fact, it may be better in cases where transport models have overpredicted herbicide leaching when batch sorption coefficients have been used.     

Sorption and photolysis studies in soil and sediment of the herbicide napropamide

Abstract

The influence of soil and sediment composition on sorption and photodegradation of the herbicide napropamide [N, N‐diethyl‐2‐(1‐naphthyloxy)propionamide] was investigated. Five soils and one sediment were selected for this study and the clay fractions were obtained by sedimentation. Sorption‐desorption was studied by batch equilibration technique and photolysis in a photoreactor emitting within 300–450 nm wavelenght with a maximum at 365 nm. Sorption increased with clay content and was not related to organic matter *content. High irreversibility of sorption was related to the greater montmorillonite content. The presence of soil or sediment reduced photolysis rate due to screen effect and this process did not depend on solid composition but on particle size distribution.     

Sorption of herbicides in relation to soil variability and landscape position

Using the soil-water sorption partitioning coefficient (Kd), this study quantified the spatial variation of 2,4-D sorption by soil in an undulating-to-hummocky terrain landscape near Minnedosa, MB, Canada. Herbicide sorption was most strongly related to soil organic matter content and slope position, with greatest sorption occurring in lower landscape positions with greater soil organic matter content. The relation between sorption and slope position was more pronounced under conventional tillage (CT) than under long-term zero-tillage (ZT). Using multivariate regression and three independent variables (soil organic matter content, soil clay content and soil pH), the prediction of herbicide sorption by soil was very good for CT (R2 = 0.89) and adequately for ZT (R2 = 0.53).     

Testing common sediment-porewater distribution models for their ability to predict dissolved concentrations of POPs in The Grenlandsfjords, Norway

This study compares in situ observed porewater concentration of persistent organic pollutants (POPs) with predictions by common solid-water phase distribution models. Bottom sediments were sampled in The Grenlandsfjords, Norway, and the interstitial porewater was isolated from the solids by centrifugation and filtration. Both phases were analysed for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/F), polycyclic aromatic hydrocarbons (PAH), and organic carbon. Based on the sediments' solid phase content of POPs, organic carbon, and soot carbon, we used the organic matter partitioning (OMP), and also the soot and organic matter partitioning (SOMP) model to estimate the porewater concentration. The OMP model gave better agreement to observations than the SOMP model for both PCDD/Fs and PAHs. The observed concentration of the PCDD/Fs in the sediments' porewater was much higher than in the deep water of the fjord. The logarithm of the organic matter-water partitioning coefficent (log K(OC)) in the porewater had positive linear regression on the logarithm of the octanol-water partitioning coefficient (log K(OW)). The slope of the regression model was indistinguishable from 1, except for the PAHs as a group which had a slope less than 1. This contrasts to previous studies undertaken in The Grenlandsfjords water column, where the slopes were higher than 1 for PCDD/Fs, and the K(OC) were much higher than the K(OW). One explanation may be that the influence of POPs adsorption to soots decrease because competitive sorption by other compounds in the sediment are higher than in the water column. This indicates that the sorption isotherms for these POPs need better understanding in order to be applicable in both the water column and the porewater.