The Evolution of Visibility Deterioration and Aerosol Spectra in the St. Louis Urban Plume

Under the auspices of Project METROMEX, studies of visibility de-teoration downwind of St. Louis were conducted during July-August 1974-1975. Estimates of horizontal visual range, standard meteorological data, and aerosol characteristics within the mixing layer were acquired upwind, over, and downwind of the metropolitan area by means of airborne transects. Aerosol number, surface, and volume distributions for particles between 0.025-2.5 µm were generated from the airborne measurement of Aitken nucleus concentrations, cloud condensation nuclei, and aerosols detected in situ with optical probes. Visibility reduction amounting to 50% of prevailing regional upwind visibilities consistently occurs at a distance corresponding to 2-3 hours travel time downwind for an air parcel moving with the mean transport wind. The regions of visibility minimum do not coincide with locations of maximum Aitken nucleus concentrations, but rather correspond in space and time to increased values of cloud condensation nuclei and increased numbers of particles in the 0.1-2.5 µm diameter range. Comparisons of observed aerosol evolution with similar laboratory studies suggest that most of the light scattering aerosols are of secondary origin.     

Soot particles and their impacts on the mass cycle in the Tibetan atmosphere

Atmospheric aerosol particles in urban and mountain areas around Lhasa city (29.65°N, 91.13°E) in the Tibetan Plateau were collected in the summers of 1998 and 1999. The particles were analyzed with electron microscopes and an energy dispersive X-ray spectrometer. Individual particle morphology, elemental composition and mixture of sulfate and nitrate were investigated. In the urban area, soot particles emitted from vegetation burning were dominant. These particles were characterized by chain or aggregate morphologies, and an elemental composition of potassium and sulfur. Such particles were frequently detected in mountain areas out of the city, where they formed droplets acting as condensation nuclei. Quantitative estimation indicated that sulfur was accumulated onto the soot particles during their dispersion from the urban area to mountain areas. Sulfate and nitrate detections indicated that soot particles collected in the urban area did not contain nitrate and BaCl₂-reactive sulfate, which revealed that the combination of sulfur and potassium in the particles was not K₂SO₄. In contrast, the particles dispersed to mountain areas contained BaCl₂-reactive sulfate and some contained nitrate, suggesting that soot particles emitted from the urban area could increase the buffering capacity of aerosol particles and enhance the formation of particulate sulfate through heterogeneous conversion in the Tibetan atmosphere.     

Mineral dust is a sink for chlorine in the marine boundary layer

Dust particles affect the budgets of important traces gases by providing a surface on which heterogeneous reactions can occur. The uptake of soluble species on dust alters the physical, chemical, and optical properties and the overall ability of dust to act as cloud condensation and ice nuclei. It is commonly assumed that all measured chloride in particulate filter samples is associated with sea-salt particles and any chloride in dust occurs as the result of internal mixtures of sea-salt and dust particles, formed by cloud processing. Here we show high temporal resolution data demonstrating the direct uptake of chlorine by dust via heterogeneous reaction with HCl(g). This reaction added significant amounts of chlorine to the dust particles during a major dust storm, representing 4–9% of the individual dust particle mass. Up to 65±4% of the dust particles contained chlorine due to this heterogeneous reaction during the dust front. Ignoring this process leads to an overestimation of sea-salt concentrations from bulk measurements, and an underestimation of the degree of sea-salt aging. The uptake of chloride will change the pH and hygroscopic properties of the dust and thus can influence the budgets of other reactive gases. Including this heterogeneous process in atmospheric measurements and chemical transport models will improve our ability to predict the atmosphere's composition and radiation budget with greater accuracy.     

Cloudwater studies at a high elevation site in the Vosges Mountains (France)

Cloud and rainwater samples have been collected at a high elevation site in the Vosges Mountains. An automated collection system has been used to collect bulk cloudwater and small cloudwater droplets. Bulk cloudwater concentrations were up to 10 times more concentrated than rainwater concentrations. Small clouddroplets showed generally higher concentrations than bulk cloudwater. Nevertheless, the enrichment factors depend on the compounds under study and appear to be related to the composition of the cloud condensation nuclei forming small or large clouddroplets. Principal component analysis and factor analysis were applied to the collected datasets and confirmed the influence of the cloud condensation nuclei on the composition difference between small and large cloudwater droplets.     

Air parcel model simulations of a convective cloud: Bacteria acting as immersion ice nuclei

The effects of bacteria acting as immersion ice nuclei were investigated in numerical sensitivity studies and compared to the efforts of other ice nuclei such as mineral dust and soot particles. An adiabatic air parcel model was employed simulating convective situations with different initial aerosol particle distributions. The maximum fractions of active ice nuclei were based on field measurements of the proportioning of atmospheric aerosol particle types in continental and marine air masses. Recent field measurements of bacteria concentrations in cloud water and in snow samples were used. From the concentrations in bulk samples the concentration in mean sized cloud droplets was estimated. Immersion freezing was described based on laboratory measurements to constrain the freezing fraction versus temperature. The results indicated that the effects of diminutive amounts of bacteria on ice formation in convective clouds, while being significantly less than the effects of mineral dust particles, might be comparable to the expected effects of soot particles acting as ice nuclei. It can be predicted that bacterial ice nuclei would have to be enriched by at least 10⁴ times reported concentrations in cloud water in order to equate to the impact of mineral dust ice nuclei present in 20–25% of all cloud droplets.     

SO2 oxidation in cloud drops containing NaCl or sea salt as condensation nuclei

Experimental results from cloud-chamber studies provide direct evidence that NaCl, artificial sea salt and natural sea salt promote faster rates of aqueous SO₂ oxidation than observed in the absence of these salts. However, the chemical basis for this effect has not been clarified. Oxidation rates > 30% h⁻¹are observed in cloud-chamber experiments with 0.4 μm-diameter salt particles as cloud nuclei and a cloud pH of 6. SO₂ oxidation under similar atmospheric conditions might account for the rapid formation of sulfate observed in marine fogs.     

Ion balances of size-resolved tropospheric aerosol samples: implications for the acidity and atmospheric processing of aerosols

A large set of size-resolved aerosol samples was inspected with regard to their ion balance to shed light on how the aerosol acidity changes with particle size in the lower troposphere and what implications this might have for the atmospheric processing of aerosols. Quite different behaviour between the remote and more polluted environments could be observed. At the remote sites, practically the whole accumulation mode had cation-to-anion ratios clearly below unity, indicating that these particles were quite acidic. The supermicron size range was considerably less acidic and may in some cases have been close to neutral or even alkaline. An interesting feature common to the remote sites was a clear jump in the cation-to-anion ratio when going from the accumulation to the Aitken mode. The most likely reason for this was cloud processing which, via in-cloud sulphate production, makes the smallest accumulation-mode particles more acidic than the non-activated Aitken-mode particles. A direct consequence of the less acidic nature of the Aitken mode is that it can take up semi-volatile, water-soluble gases much easier than the accumulation mode. This feature may have significant implications for atmospheric cloud condensation nuclei production in remote environments. In rural and urban locations, the cation-to-anion ratio was close to unity over most of the accumulation mode, but increased significantly when going to either larger or smaller particle sizes. The high cation-to-anion ratios in the supermicron size range were ascribed to carbonate associated with mineral dust. The ubiquitous presence of carbonate in these particles indicates that they were neutral or alkaline, making them good sites for heterogeneous reactions involving acidic trace gases. The high cation-to-anion ratios in the Aitken mode suggest that these particles contained some water-soluble anions not detected by our chemical analysis. This is worth keeping in mind when investigating the hygroscopic properties or potential health effects of ultrafine particles in polluted environments.     

Long-term study of cloud condensation nuclei (CCN) activation of the atmospheric aerosol in Vienna

During a total of 11 months, cloud condensation nuclei (CCN at super-saturation S 0.5%) and condensation nuclei (CN) concentrations were measured in the urban background aerosol of Vienna, Austria. For several months, number size distributions between 13.22?nm and 929?nm were also measured with a scanning mobility particle spectrometer (SMPS). Activation ratios (i.e. CCN/CN ratios) were calculated and apparent activation diameters obtained by integrating the SMPS size distributions. Variations in all CCN parameters (concentration, activation ratio, apparent activation diameter) are quite large on timescales of days to weeks. Passages of fronts influenced CCN parameters. Concentrations decreased with the passage of a front. No significant differences were found for fronts from different sectors (for Vienna mainly north to west and south to east). CCN concentrations at 0.5% S ranged from 160?cm(-3) to 3600?cm(-3) with a campaign average of 820?cm(-3). Activation ratios were quite low (0.02-0.47, average: 0.13) and comparable to activation ratios found in other polluted regions (e.g. Cubison et?al., 2008). Apparent activation diameters were found to be much larger (campaign average: 169?nm, range: (69-370) nm) than activation diameters for single-salt particles (around 50?nm depending on the salt). Contrary to CN concentrations, which are influenced by source patterns, CCN concentrations did not exhibit distinct diurnal patterns. Activation ratios showed diurnal variations counter-current to the variations of CN concentrations.     

Why ozonolysis may not increase the hydrophilicity of particles

It is commonly assumed that atmospheric oxidation of hydrocarbon particles or hydrocarbon coatings on particles leads to polar products and increased water uptake, altering atmospheric visibility and increasing the likelihood they will act as cloud condensation nuclei (CCN). We show here through laboratory experiments that increased water uptake depends on the 3-dimensional structure of the particles. Laboratory studies of particles formed during ozonolysis of surface-bound alkenes, present as terminally unsaturated self-assembled monolayers (C8= SAM) on a silica substrate, were carried out at room temperature and 1 atm pressure. SAMs were exposed to ～10¹³ O₃ molecules cm^?3 for 40 min and resultant particles were analyzed using single particle Fourier transform infrared micro-spectroscopy (micro-FTIR) and secondary ion mass spectroscopy (SIMS). Spectroscopy results show that –COOH and other polar groups are formed but are buried inside a hydrophobic shell, consistent with earlier observations (McIntire et al., 2005, Moussa et al., 2009) that water uptake does not increase after reaction of the terminal alkene with O₃. These insights into the 3-D structure of particles formed on oxidation have important implications for the ability of secondary organic aerosols to act as CCN. In addition, the nature of the surface of the particles is expected to determine their uptake into biological systems such as the surface of the lungs.     

Effect of biomass burning and regional background aerosols on CCN activity derived from airborne in-situ measurements

Airborne in-situ measurements were analyzed to investigate the effects of biomass burning and regional background aerosols on cloud condensation nuclei (CCN) activity in the Pacific Dust Experiment (PACDEX) during April and May 2007. Airmass trajectories with both horizontal and vertical motions were provided to identify the aerosol sources. In the biomass burning cases, the elevated aerosol layers were clearly observed at dry conditions because of the convection of airmass in the source region. The relative aging of aerosols was supported by the ratios of BC to particles with size ranging from 0.1 to 1.0 μm (N_0.1–1.0) and BC to carbon monoxide. Compared to aerosols in the precedent plume of biomass burning, aged particles in the latter plume were more activated to CCN at 0.4% (CCN_0.4%) than 0.1% supersaturation (CCN_0.1%) due to aerosols chemical modification during the aging process. On the other hand, significant difference of CCN_0.4% and CCN_0.1% at regional background aerosols over the Pacific Ocean was due to the activated particles below 1 μm in diameter. Although higher concentrations of aged particles were observed over the eastern Pacific Ocean, activated aerosols to cloud droplet was comparatively similar in the western Pacific Ocean because of the similar concentrations of N_0.1–1.0 in both cases.     

Pollution and the Planetary Albedo

Addition of cloud nuclei by pollution can lead to an increase in the solar radiation reflected by clouds. The reflection of solar energy by clouds already may have been increased by the addition of man-made cloud nuclei. The albedo of a cloud is proportional to optical thickness for thin clouds, but changes more slowly with increasing thickness. The optical thickness is increased when the number of cloud nuclei is increased. Although the changes are small, the long-term effect on climate can be profound.     

Size-segregated chemistry of particulate dicarboxylic acids in the Arctic atmosphere

Gas–particle interactions of low-molecular-weight dicarboxylic acids were studied at a coastal Arctic site during the summer. Size segregated measurements with a Berner low-pressure impactor displayed up to four modes for ionic compounds: an Aitken mode, an accumulation mode, and two supermicron modes. The lower supermicron mode was ascribed to sea-salt, whereas the upper mode consisted mostly of species associated with continental particles. All four modes could be identified for oxalic acid, with the lower supermicron mode being the dominant. Malonic acid displayed a supermicron mode but was not found in the submicron size range. Succinic acid had an accumulation mode and, in a few samples, a supermicron mode. Glutaric acid displayed sometimes and accumulation mode, sometimes a supermicron mode, and occasionally both. The most probable formation pathway for submicron oxalic and glutaric acid was condensation from the gas phase, even though production in cloud droplets cannot be ruled out either. A slightly different formation pathway may have been important for submicron succinic acid production. Supermicron oxalic acid was probably formed by condensation from the gas-phase, by heterogeneous reactions occurring on the surface of pre-existing sea-salt and continental particles, or in cloud droplets. A larger mass median diameter for supermicron malonic and glutaric acid might be indicative of liquid-phase production in aqueous sea-salt particles. Evidence on possibly substantial sampling artifacts related to measuring dicarboxylic acids using filters were also obtained.     

Factors influencing aerosol solubility during cloud processes

The water-soluble fraction of an aerosol determines its chemical and physical properties and also its behaviour. The origin of the aerosol and its atmospheric transport influence its solubility. Cloud process simulations have been conducted on both Saharan and anthropogenic aerosols. The rate of solubilisation was followed for native and processed aerosol particles; it is controlled by the pH variations due to release of acids or bases. It appears that one condensation/evaporation cycle increases the solubility of aerosol particles. Increasing the number of cloud process simulations does not affect the solubility profile. The solubility depends only on the conditions of the last cloud cycle and, in particular, on the factor controlling pH during this process.     

Characterization of organic coatings on hygroscopic salt particles and their atmospheric impacts

The photooxidation of α-pinene in the presence of NO₂, with and without added NaNO₃ seed particles, has been studied in a large-diameter flow tube. Particles formed by homogeneous nucleation and by condensation on the pre-existing seeds were sampled at various stages of the reaction, dried using four diffusion dryers, size selected at different mobility diameters (d_m) using a differential mobility analyzer (DMA), and characterized with a single particle mass spectrometer (SPLAT II). It was found that homogeneously nucleated particles are spherical, have a density (ρ) of 1.25 ± 0.02 g cm^?3 (±2σ) and contain a significant amount of organic nitrates. The mass spectra of the low volatility products condensed on the NaNO₃ seed particles were found to be virtually the same as in the case of homogeneous nucleation. The data show that the presence of even a submonolayer of organics on the NaNO₃ particles causes water retention that leads to a decrease in particle density and that the amount of water retained increases with organic coating thickness. Thicker coatings appear to inhibit water evaporation from the particle seeds altogether. This suggests that in the atmosphere, where low volatility organics are plentiful, some hygroscopic salts will retain water and have different densities and refractive indices than expected in the absence of the organic coating. This water retention combined with the organic shell on the particles can potentially impact light scattering by these particles and activity as cloud condensation nuclei (CCN), as well as heterogeneous chemistry and photochemistry on the particles.     

Parameterization of wet deposition of sulfate by precipitation rate

A method for the estimation of wet deposition of sulfate is developed using routinely available meteorological data and the observed airborne sulfate concentration. This approach takes into account different mechanisms of precipitation formation that determine sulfate concentration in precipitation water. Four different precipitating cloud types, including cold cloud, warm cloud, stratified layered cloud and convective cloud, according to their precipitation formations are incorporated differently to estimate sulfate concentration in precipitation water. This method is implemented to estimate wet deposition of sulfate in Seoul for the days when the airborne sulfate concentration is available. The estimated wet deposition of sulfate shows that the model slightly overestimates the wet deposition of sulfate especially for the warm cloud case while it does underestimate sulfate deposition for the Bergeron process in developing precipitation particularly when the input airborne sulfate concentration is small. The precipitation amount weighted mean wet deposition of sulfate obtained from the model, overestimates that observed by a factor of 1.6 for this case study. This discrepancy might be associated with non-steady revolutional features of precipitating clouds and the resolvable scaling difference between the model and observation.     

Influence of dust composition on cloud droplet formation

Previous studies suggest that interactions between dust particles and clouds are significant; yet the conditions where dust particles can serve as cloud condensation nuclei (CCN) are uncertain. Since major dust components are insoluble, the CCN activity of dust strongly depends on the presence of minor components. However, many minor components measured in dust particles are overlooked in cloud modeling studies. Some of these compounds are believed to be products of heterogeneous reactions involving carbonates. In this study, we calculate Kohler curves (modified for slightly soluble substances) for dust particles containing small amounts of K⁺, Mg²⁺, or Ca²⁺ compounds to estimate the conditions where reacted and unreacted dust can activate. We also use an adiabatic parcel model to evaluate the influence of dust particles on cloud properties via water competition. Based on their bulk solubilities, K⁺ compounds, MgSO₄·7H₂O, Mg(NO₃)₂·6H₂O, and Ca(NO₃)₂·4H₂O are classified as highly soluble substances, which enable activation of fine dust. Slightly soluble gypsum and MgSO₃·6H₂O, which may form via heterogeneous reactions involving carbonates, enable activation of particles with diameters between about 0.6 and 2 μm under some conditions. Dust particles>2 μm often activate regardless of their composition. Only under very specialized conditions does the addition of a dust distribution into a rising parcel containing fine (NH₄)₂SO₄ particles significantly reduce the total number of activated particles via water competition. Effects of dust on cloud saturation and droplet number via water competition are generally smaller than those reported previously for sea salt. Large numbers of fine dust CCN can significantly enhance the number of activated particles under certain conditions. Improved representations of dust mineralogy and reactions in global aerosol models could improve predictions of the effects of aerosol on climate.     

Organosulfates from glycolaldehyde in aqueous aerosols and clouds: Laboratory studies

Secondary organic aerosol (SOA) formation is enhanced on acidic seed particles; SOA also forms during cloud processing reactions where acidic sulfate is prevalent. Recently several studies have focused on the identification of organosulfates in atmospheric aerosols or smog chamber experiments, and upon the mechanism of formation for these products. We identify several organosulfate products formed during the laboratory OH radical oxidation of dilute aqueous glycolaldehyde in the presence of sulfuric acid. We propose a radical–radical reaction mechanism as being consistent with formation of these products under our experimental conditions. Using a kinetics model we estimate that organosulfates account for less than 1% of organic matter formed from these precursors during cloud processing. However, in wet acidic aerosols, where precursors are highly concentrated and acidic sulfate makes up close to half of the aerosol mass, this radical–radical reaction could account for significant organosulfate production.     

Size distributions of nano/micron dicarboxylic acids and inorganic ions in suburban PM episode and non-episodic aerosol

The distribution of nano/micron dicarboxylic acids and inorganic ions in size-segregated suburban aerosol of southern Taiwan was studied for a PM episode and a non-episodic pollution period, revealing for the first time the distribution of these nanoscale particles in suburban aerosols. Inorganic species, especially nitrate, were present in higher concentrations during the PM episode. A combination of gas-to-nuclei conversion of nitrate particles and accumulation of secondary photochemical products originating from traffic-related emissions was likely a crucial cause of the PM episode. Sulfate, ammonium, and oxalic acid were the dominant anion, cation, and dicarboxylic acid, respectively, accounting for a minimum of 49% of the total anion, cation or dicarboxylic acid mass. Peak concentrations of these species occurred at 0.54 μm in the droplet mode during both non-episodic and PM episode periods, indicating an association with cloud-processed particles. On average, sulfate concentration was 16–17 times that of oxalic acid. Oxalic acid was nevertheless the most abundant dicarboxylic acid during both periods, followed by succinic, malonic, maleic, malic and tartaric acid. The mass median aerodynamic diameter (MMAD) of oxalic acid was 0.77 μm with a bi-modal presence at 0.54 μm and 18 nm during non-episodic pollution and an MMAD of 0.67 μm with mono-modal presence at 0.54 μm in PM episode aerosol. The concomitant formation of malonic acid and oxalic acid was attributed to in-cloud processes. During the PM episode in the 5–100 nm nanoscale range, an oxalic acid/sulfate mass ratio of 40.2–82.3% suggested a stronger formation potential for oxalic acid than for sulfate in the nuclei mode. For total cations (TC), total inorganic anions (TIA) and total dicarboxylic acids (TDA), major contributing particles were in the droplet mode, with least in the nuclei mode. The ratio of TDA to TIA in the nuclei mode increased greatly from 8.40% during the non-episodic pollution period to 28.08% during the PM episode, favoring dicarboxylic acid formation in the nuclei mode. The evidence suggests stronger formation strength and contribution potential exists for dicarboxylic acids than for inorganic salts in nanoscale particles, especially in PM episode aerosol.