Leachability of heavy metals from copper blasting grit waste

This investigation presents the results of leaching tests, using the multiple-batch procedure, on cadmium, zinc, copper, lead, and chromium from copper blasting grit waste generated from a shipbuilding and repair company in Bahrain. The leaching test results have demonstrated that the metals tested were generally released in low concentrations except for copper and zinc. Metal leachability appeared to be dependent upon the pH and composition of the leaching medium.     

Treatment of mixed contamination in water using cyclodextrin‐based materials

This study investigated the effectiveness of a cyclodextrin‐based solid material for the removal of mixed dissolved contaminants. The solid material was prepared by condensation of α‐cyclodextrin. The removal efficiency was found to be 70 percent for total heavy metals (cadmium, lead, chromium, iron, nickel, cobalt, and mercury) to 98 percent for polychlorinated biphenyls (PCBs). The optimum pH for heavy metal removal was approximately 5 and for PCBs it was in the range of 5–7. All of these heavy metals were successfully recovered from the spent cyclodextrin‐based material using nitric acid, allowing the material to be reused for further passes. The results also showed that the presence of alkaline and alkaline earth metals did not have a significant effect on the removal efficiency, indicating that the cyclodextrin‐based material could selectively remove the heavy metals of concern without being consumed by alkaline and alkaline‐earth metals. © 2006 Government of Canada.     

Metal speciation in landfill leachates with a focus on the influence of organic matter

This study characterises the heavy-metal content in leachates collected from eight landfills in France. In order to identify heavy metal occurrence in the different size fractions of leachates, a cascade filtration protocol was applied directly in the field, under a nitrogen gas atmosphere to avoid metal oxidation. The results of analyses performed on the leachates suggest that most of the metals are concentrated in the <30 kDa fraction, while lead, copper and cadmium show an association with larger particles. Initial speciation calculations, without considering metal association with organic matter, suggest that leachate concentrations in lead, copper, nickel and zinc are super-saturated with respect to sulphur phases. Speciation calculations that account for metal complexation with organic matter, considered as fulvic acids based on C1(s) NEXAFS spectroscopy, show that this mechanism is not sufficient to explain such deviation from equilibrium conditions. It is therefore hypothesized that the deviation results also from the influence of biological activity on the kinetics of mineral phase precipitation and dissolution, thus providing a dynamic system. The results of chemical analyses of sampled fluids are compared with speciation calculations and some implications for the assessment of metal mobility and natural attenuation in a context of landfill risk assessment are discussed.     

Comparison of methods for leaching heavy metals from composts

This paper presents the determination of total iron, copper, zinc, chromium, nickel, lead, cadmium and mercury contents in the compost obtained from sorted municipal organic solid waste applying the following methods of sample mineralization: 40% hydrofluoric acid with preliminary incineration of a sample, a mixture of concentrated nitric(V) and chloric(VII) acids with preliminary incineration of organic matter and a mixture of nitric(V) and chloric(VII) acids without sample incineration. The speciation analysis of Tessier was used to estimate the bioavailability of the metals. Elution degrees of the mobile forms of the metals from the compost with 10% nitric(V) acid and 1 mol/dm(3) hydrochloric acid were compared. The contents of the elements in the eluates were determined applying atomic absorption spectrometry.     

Green algae of the genus Spirogyra: A potential absorbent for heavy metal from coal mine water

Algae have considerable capability for absorbing heavy metals from wastewaters and are considered an effective treatment technology. Heavy metal absorption from coal mine water from the Bhowra Abandoned mine (open cast mine) and the Sudamdih Shaft mine (underground mine waters), both located in Dhanbad, India, by cells of Spirogyra was studied at different dilutions (100 percent, 80 percent, 60 percent, 40 percent, and 20 percent). In the present study, the following 18 metals were selected for analysis: aluminium (Al), arsenic (As), silver (Ag), barium (Ba), beryllium (Be), bismuth (Bi), cadmium (Cd), cobalt (Co), chromium (Cr), cesium (Cs), copper (Cu), iron (Fe), gallium (Ga), indium (In), potassium (K), manganese (Mn), nickel (Ni), and vanadium (V). Accordingly, Al and K were found to be higher in concentration with respect to selected metals for both mine waters. The biosorption study revealed that higher amounts of Al, Bi, Co, Cs, Fe, Ga, Mn, Ni, and V were absorbed by algal biomass at 100 percent concentration from both mine waters. The maximum uptake of Cu, As, and Cd was measured at 60 percent, 40 percent, and 20 percent, respectively, for the Bhowra Abandoned mine water. The biosorption equilibrium study revealed that Ag, Al, Ba, Be, Bi, Co, Cr, Cs, Fe, Ga, In, K, Mn, Ni, and V were maximally absorbed by algal biomass at 100 percent concentration from Bhowra mine water, while the maximum uptake by the algal biomass measured for the Sudamidh coal mine water was for Al, As, Bi, Cu, Fe, and Mn at 100 percent concentration. The different physicochemical characteristics of mine water and drinking water standards was also studied. Accordingly, total dissolved solid and chemical oxygen demand concentrations exceeded the drinking water standards for water samples collected from both mines.     

Thermal and hydrometallurgical recovery methods of heavy metals from municipal solid waste fly ash

Heavy metals in fly ash from municipal solid waste incinerators are present in high concentrations. Therefore fly ash must be treated as a hazardous material. On the other hand, it may be a potential source of heavy metals. Zinc, lead, cadmium, and copper can be relatively easily removed during the thermal treatment of fly ash, e.g. in the form of chlorides. In return, wet extraction methods could provide promising results for these elements including chromium and nickel. The aim of this study was to investigate and compare thermal and hydrometallurgical treatment of municipal solid waste fly ash. Thermal treatment of fly ash was performed in a rotary reactor at temperatures between 950 and 1050 °C and in a muffle oven at temperatures from 500 to 1200 °C. The removal more than 90% was reached by easy volatile heavy metals such as cadmium and lead and also by copper, however at higher temperature in the muffle oven. The alkaline (sodium hydroxide) and acid (sulphuric acid) leaching of the fly ash was carried out while the influence of temperature, time, concentration, and liquid/solid ratio were investigated. The combination of alkaline-acidic leaching enhanced the removal of, namely, zinc, chromium and nickel.     

Role of iron chemistry in controlling the release of pollutants from resuspended sediments

Aquatic sediments often contain a large number of chemical contaminants that are potential pollutants. It is often presumed that such contaminants are released to the water column during sediment resuspension and, in there, adversely impact aquatic life and other beneficial uses of the water. However, extensive laboratory and field studies of about 100 contaminated sediments from across the United States that specifically addressed this type of release showed that of about 30 common heavy metals, organic compounds, and other potential pollutants, only manganese II and ammonia were released to then remain in the water column after sediment resuspension. These results indicated that the chemistry of aqueous iron controls the availability of many contaminants in resuspended sediment. The formation of ferric hydroxide during sediment suspension into the water column, as a result of the reaction between ferrous iron in the sediments and dissolved oxygen in the water column, leads to rapid scavenging of many contaminants in the Fe(OH)₃ precipitate. The scavenged contaminants are redeposited in the sediments. This article reviews the role of the aqueous chemistry of iron as it relates to controlling the release of potential pollutants from resuspended sediments. © 2005 Wiley Periodicals, Inc.     

Behavior of As,Cd, Co,Cr, Cu,Pb, Ni,and Zn at the soil/plant interface around an uncontrolled landfill (Casablanca,Morocco)

The present work undertaken in the environmental context aims to study the distribution of heavy metals in plants that grow naturally around uncontrolled landfills. The study's goal was to identify plants that can be used to remediate contaminated soils. For this purpose, 14 plants species and their rhizospheric soil samples were collected and analyzed for arsenic, cadmium, cobalt, chromium, copper, lead, nickel, and zinc by inductively coupled plasma‐atomic emission spectrometry. The results showed the presence of elevated metal concentrations in soil, many exceeding the regulatory values, and that many species exhibited an ability to accumulate multiple metals in their shoots and roots without sustaining toxicity. This was confirmed by bioconcentration and translocation factors generally higher than 1.     

Arbuscular mycorrhizal fungi involvement in zinc and cadmium speciation change and phytoaccumulation

Over the past few years, there has been a greater study and understanding of the application of phytoremediation to remediate contaminated soil. The enhancement of phytoaccumulation of heavy metals—zinc (Zn), cadmium (Cd), arsenic (As), and selenium (Se)—in plants has been shown by inoculation of roots using arbuscular mycorrhizal fungi (AMF). This article presents the results of in vitro lab experiments conducted to verify the effects of AMF ( Glomus intraradices) hyphae on speciation of essential Zn and nonessential Cd heavy metals in order to change these metals from a water‐ insoluble carbonate to a soluble and phytoavailable form. Results show that in the presence of heavy metals in a nonavailable form to plants, endomycorrhizal hyphae can change the metal from carbonate to a water‐ soluble species. This phenomenon is more apparent with a nonessential (Cd) than with an essential metal (Zn). Zn saturation is reached in the G. intraradices colonized roots at around 400 ppm, independently of initial ZnCO₃ concentrations. Cd saturation is not reached; in the lower Cd treatment, the plant/media metal ratio is 3:1, and in the higher treatment, the ratio is 1:1. © 2005 Wiley Periodicals, Inc.     

Metal Contamination of the Natural Environment in Norway from Long Range Atmospheric Transport

Long range atmospheric transport is the most important sourceof contamination to the natural environment in Norway with manyheavy metals. Investigations based on aerosol studies, bulkdeposition measurements and moss analysis show that airborne transport from other parts of Europe is the major mode for supplyof vanadium, zinc, arsenic, selenium, molybdenum, cadmium, tin,antimony, tellurium, thallium, lead, and bismuth, whereas metalssuch as chromium, nickel, and copper are mainly derived from point sources within Norway and in northwestern Russia close tothe Norwegian border. Elements associated with long range transport show substantial enrichment in the humus horizon of natural soils in southern Norway, sometimes to levels suspected to cause effects on soil microbial processes. E.g. lead concentration values of 150–200 ppm are observed in the mostcontaminated areas in the south as compared to about 5 ppm inthe far north. Elements such as lead and cadmium also show enrichment in some terrestrial food chains. These elements alsoshow considerably elevated levels over background concentrationsin the water and sediment of small lakes in the southern part ofthe country. Retrospective studies based on ombrogenous peatcores indicate that long range transport has been a significantsource of heavy metal contamination in southern Norway for thelast couple of centuries. The deposition of most heavy metals inNorway has been considerably reduced over the last 20 yr, withthe exception of contributions in the north from Russian smelters.     

Diffusion test of 20 kinds of waste molten slags and competitive materials

“Waste molten slag” is a glass-like material produced by the vitrification of solid waste or solid waste incineration residue. When using slags of this kind in a natural environment, their impact is anticipated to be at the same level as competitive or substituted materials. In this study, we made comparative evaluations between waste molten slags and competitive materials, using 20 samples in total. It was proved that release fluxes of metals from molten slags of municipal solid waste were almost at the same level as competitive or substituted materials. However, a larger impact will be caused from some types of slag that contain harmful metals in high concentrations, such as the slag from shredded automobile residues. The results of release flux showed that nearly 80% of the slope of the flux did not fit with the diffusion range. However, the linearity of every flux was extremely high, regardless of the slope.     

Geochemistry of Iron and Sulfur in the Zone of Microbial Sulfate Reduction in Mine Tailings

The cycling of iron and sulfur in mine tailings depends on various chemical and microbial reactions. The present study was undertaken in order to assess the role played by populations of sulfate-reducing bacteria (SRB) on the fate of Fe and SO₄ ^2- in Cu–Zn and Au tailings. Samples were taken along a 50-cm deep profile at all sites and analyzed for SRB populations, solid-phase mineralogy and porewater geochemistry. Results indicated that the Cu–Zn tailings were highly oxidized near the surface, as shown by the very low pH, high redox potential, large concentrations of soluble Cu, Zn and sulfate in the porewaters, and the depletion of pyrite. On the other hand, Au tailings were more pH neutral, slightly anoxic, and showed low concentrations of Fe and SO₄ ^2- in the porewaters and very little pyrite oxidation. SRB populations in the Cu–Zn tailings increased with depth, just below the oxic/anoxic interface and were linked to a decline of sulfate and DOC concentrations around the same depths. However, large concentrations of dissolved Fe were also observed around the same depth intervals. Our results suggest that SRB could be involved in sulfate reduction in the Cu–Zn tailings, because the solubility of sulfate was not controlled by the precipitation of sulfate-rich minerals. However, the presence of soluble Fe in the reduced portion of the tailings was also indicative of the presence of iron reducing bacteria (IRB). These bacteria were not enumerated in the present study, but their co-occurrence with SRB has been reported in the past in similar mining environments. The decline of sulfate and the release of soluble iron into the porewaters were also paralleled by a pH increase and the generation of alkalinity. In the Au tailings, SRB populations were generally constant throughout the depth profile and could not be ascribed to sulfate reduction in the porewaters. The solubilities of sulfate and iron in these tailings were partially controlled by jarosite and Fe-oxide minerals. It is then clear that SRB populations could be recovered from various mining sites, but their activity cannot be ascertained based on microbial enumeration and geochemical data.     

Phytoremediation of zinc and cadmium: A study of arbuscular mycorrhizal hyphae

Arbuscular mycorrhizal fungi (AMF) are microscopic fungi naturally occurring in soil that form a symbiosis with plant roots, producing a highly elaborated hyphal mycelium network in soil.In vitro lab experiments were conducted to determine whether extraradical mycorrhizal hyphae are directly involved in sequestration and uptake of essential zinc and nonessential cadmium by plant roots under toxic concentrations. The research is a continuation of an initial study presented in the Spring 2005 issue of Remediation that focused on the specific role of AMF in the speciation of heavy metals. Thus, this article presents a more expanded view. Results show that zinc and cadmium heavy metals are sequestered and translocated to plant roots via extraradical AMF hyphae. Root/growth media accumulation factors reached 5:1 and 18:1 for zinc and cadmium, respectively. Phytoremediation of heavy metal–contaminated soils can be enhanced by mycorrhizal inoculation. © 2005 Wiley Periodicals, Inc.     

Nutrients and heavy metals distribution in thermally treated pig manure.

Ash from pig manure treated by combustion and thermal gasification was characterized and compared in terms of nutrient, i.e., potassium (K), phosphorus (P) and heavy metal, i.e., cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni) and zinc (Zn) contents. Total nutrient and metal concentrations were measured using energy dispersive X-ray fluorescence analysis. Acid (HNO3, H2SO4) and water-extractable concentrations were also measured both in non-classified ash and in selected ash particle size fractions using flame atomic absorption spectrometry and colorimetric spectrometry. Results indicate that ash from gasified manure contained more water-extractable K in comparison with combusted manure whereas the opposite was the case with respect to P. Heavy metals Ni, Cr and Cd were present in higher concentrations in the fine particle size fractions (< 30 microm of particle diameter), whereas K, P, Zn and Cu exhibited higher concentrations in the coarser particle size fractions (> 30 microm).     

A study of heavy metals and their fate in the composting of tannery sludge

Tannery waste is categorized as toxic and hazardous in Malaysia due to its high content of Cr (in excess of 500 mg/kg) and other heavy metals. Heavy metals, when in high enough concentrations, have the potential to be both phytotoxic and zootoxic. Heavy metals are found as contaminants in tannery sludge. This investigation aimed to identify the fate of chromium, cadmium, copper, lead, and zinc concentrations in tannery sludge throughout a 50-day composting cycle. The results of this study showed a general increase in the removal of Cr, Cd, Pb, and to a much smaller extent Zn and Cu, manifested by a decrease in their overall concentrations within the solid fraction of the final product (the decreases were likely the result of leaching). Furthermore, in using a sequential extraction method for sludge composting at different phases of treatment, a large proportion of the heavy metals were found to be associated to the residual fraction (70-80%) and fractions more resistant to extraction, X-NaOH, X-EDTA, X-HNO3 (12-29%). Less than 2% of the metals were bound to bioavailable fractions X-(KNO3+H2O).     

Influence of Metals on Lindane Adsorption onto Pine Bark

Some persistent pesticides, as organochlorines, are not efficiently removed from usual wastewater treatment plants, unless a tertiary treatment, commonly activated carbon adsorption, is applied. The downside of this practice rests on its high regeneration costs. This fact motivated the research for alternative processes involving the use of natural materials. Pine bark was used in this work, to remove lindane from contaminated waters. The adsorptive capabilities of this material were studied (equilibrium time, adsorption model and saturation of the adsorbent) and the interference of some metals (iron, cadmium, copper, nickel and lead) was also investigated. Results showed an excellent efficiency of adsorption (average 80,65%) and that the presence of the studied metals did not affect both efficiency and the model of the adsorption, within the range of the concentration of the pesticide studied.     

Phytoremediation: The uptake of metals and metalloids by rhodes grass grown on metal‐contaminated soil

An experiment was performed to examine the phytoremediation potential of Rhodes grass (Chloris gayana Kunth cv. ‘Pioneer’). The study sought to determine substrate tolerance, biomass production, and plant uptake of antimony (Sb), arsenic (As), cadmium (Cd), lead (Pb), silver (Ag), and zinc (Zn). The plants were grown on weight percent mixtures (5 percent, 15 percent, 25 percent, 35 percent, 50 percent) of a vertisol soil and base‐metal mine tailings (7–2,040 μg/g As, ≥ 30 μg/g Cd, 30–12,000 μg/g Pb, and 72–4,120 μg/g Zn). The 5 percent and 15 percent amendment of mine tailings increased the biomass production of Rhodes grass (from 0.1 g/plant to ≈ 3.5 g/plant) without appreciably elevating plant concentrations of the elements. Plant growth decreased by greater than 50 percent for the substrate containing greater than 25 percent tailings (3,023 μg/g Pb and 1,084 μg/g Zn). Reduced biomass production coincided with maximal Zn uptake by Rhodes grass (249.8 μg/g), indicating tailings induced phytotoxicity. The total concentrations of metals and metalloids tolerated by Rhodes grass in the plant‐growth medium indicated hypertolerance to elevated As, Pb, and Zn concentrations. Partial extraction of the plant‐growth medium determined that plant‐available Pb was ten times higher than Ag, As, Cd, and Zn availability. However, Rhodes grass accumulated low levels of Pb, in addition to As and Cd, over the experimental range, indicating low fodder toxicity risk to browsing livestock. This study concludes that if there are no invasive species issues associated with conservation land uses, Rhodes grass is well suited to metalliferous mined land revegetation and would therefore be highly effective for such programs in subtropical and tropical Australia. © 2005 Wiley Periodicals, Inc.     

Fluxes and Loading of Heavy Metals, Benzo[a]pyrene and Oil Products in Vilnius City

The concentrations of heavy metals Pb, Cd, Cu, Zn and Hg, benzo[a]pyrene and oil products (C₁₅–C₂₈) in bulk (wet and dry) atmospheric deposition in Vilnius city in 2005–2006 were analysed. The highest flux to the ground surface of the city residential area, reaching 1,680 mg m^?2 year^?1, was determined for oil products, which in atmospheric bulk deposition was estimated to be mainly in the form of solid sediments. Among heavy metals, the highest flux was determined for Zn (113.5 mg m^?2 year^?1), while the lowest flux was determined for Hg (0.06 mg m^?2 year^?1). The flux of investigated pollutants ranges from a few times, or for some pollutants, up to one order of magnitude higher at the urban sampling site in comparison to residential or background sites. Some hundred tons of oil products, approximately 52 tons of zinc and a considerably lower amount of mercury, benzo[a]pyrene and cadmium deposit yearly to the ground and water surface of Vilnius city. Metallic constructions related to transport and buildings, automobile exhausts, spills of fuel and lubricants are suggested to be the factors which result in the accumulation of high amounts of heavy metals, oil products and other pollutants on the ground surface of the city.     

Reactive transport modeling of remedial scenarios to predict cadmium,copper, and zinc in north fork of Clear Creek,Colorado

The North Fork of Clear Creek (NFCC), Colorado, is an acid‐mine‐drainage‐impacted stream typical of many mountain surface waters affected by historic metal mining in the western United States. The stream is devoid of fish primarily because of high metal concentrations in the water (e.g., copper and zinc) and has large amounts of settled iron oxyhydroxide solids that coat the streambed. The NFCC is part of the Central City/Clear Creek Superfund site, and remediation plans are being implemented that include treatment of three of the main point‐source inputs and cleanup of some tailings and waste rock piles. This article examines dissolved (0.45‐μm filterable) concentrations of cadmium, copper, and zinc following several potential remediation scenarios, simulated using a reactive transport model (WASP4/META4). Results from modeling indicate that for cadmium, remediation of the primary point‐source adit discharges should be sufficient to achieve acute and chronic water‐quality standards under both high‐ and low‐flow conditions. To achieve standards for copper and zinc, however, the modeling scenarios suggest that it may be necessary to treat or remove contaminated streambed sediments in downstream reaches, as well as identify and treat nonpoint sources of metals. Recommendations for improvements to the model for metal transport in acid‐mine drainage impacted streams are made. These recommendations are being implemented by the U.S. Environmental Protection Agency. © 2009 Wiley Periodicals, Inc.