Source Analysis and Hazard Screening of Xenobiotic Organic Compounds in Wastewater from Food-Processing Industries

In this study we present and apply a methodology for identifying environmentally hazardous compounds in food industry wastewaters (FIW). The methodology comprises a source analysis and a hazard screening of xenobiotic organic compounds based on environmental distribution, persistence, bioaccumulation, and toxicity in aqueous and solid phases. This approach was applied to four selected FIW representing fish, pork meat, and vegetable production. Included in this approach was an analytical–chemical screening of 137 xenobiotic organic compounds showing that 13 compounds and groups of compounds could be detected in the FIW composite samples. The combined source analysis revealed that 161 xenobiotic organic compounds could potentially be present in these four FIW. The main sources were raw materials and their processing, but also packaging and cleaning of the production facility contributed to the total number of compounds potentially present. Using the hazard screening procedure it was found that 29 and 102 compounds should be considered for further hazard assessment in the aqueous and solid phases, respectively. It is important to note that 12% of the 161 compounds could not be evaluated for environmental hazards due to lack of inherent data on degradability, toxicity, and bioaccumulation. Furthermore, for 91% of the compounds no information was found on anaerobic biodegradability. The presented procedure contributes with a systematic source analysis and a ranking of the xenobiotic organic compounds that could cause environmental concern. In this way the procedure can provide guidance to operators and decision makers on handling options for wastewater streams in food processing industries.     

离子交换树脂法处理含铜废水的研究进展

介绍了离子交换树脂在处理不同类型的含铜废水中的应用,列举了络合铜废水、游离铜废水及多金属杂质含铜废水中适用的树脂种类及应用实例,对工业应用中存在的一些问题和对策做出总结归纳,并针对该技术的发展方向提出展望。离子交换树脂法是一种较为有效的废水处理方法,对常规浓度和低浓度的含铜废水的处理效果均较好,可将废水有效资源化利用。     

工业含钒废水处理工艺的研究进展

针对大量企业采用传统提钒法制备钒产品产生的工业含钒废水的处理问题,综述了工业含钒废水处理工艺的研究进展,分别详述了沉淀法、溶剂萃取法、离子交换法、电解法、吸附法和生物法的处理工艺,并对比分析了它们的优势与不足。指出:工业含钒废水的处理既是环保的要求,又可实现有价资源的回收利用;在实际应用时,可依据工业含钒废水的p H选择相应的处理工艺及处理试剂。     

Design and modeling of optimal distillation sequence for recovery of valuable components from a waste photoresist stripper

Currently, waste photoresist stripper from the semiconductor industries is generally incinerated at high temperatures or processed as a high-calorie fuel, which can have adverse effects on the environment and economy. Recovery of valuable solvents from waste photoresist strippers is, therefore, very important for thin flat transistor-liquid crystal display (TFT-LCD) manufactures to reduce the production costs and protect the environment against industrial waste. In the present work, systematic laboratory-scale distillation experiments were carried out to regenerate the organic solvents from the waste photoresist stripper and determine if they are feasible to recycle for commercial TFT-LCD grade chemicals: in particular, 1-hydroxyethylpiperazine and methyl diglycol were mainly tried to retrieve. Based on the experiment results, possible alternative distillation sequences were examined through intensive techno-economic analysis using a rigorous process simulator. As a result, an optimal distillation sequence and condition were drawn to separate valuable organic solvents from waste photoresist stripper for a commercial purpose recovery process.     

Report: future industrial solid waste management in pars Special Economic Energy Zone (PSEEZ), Iran.

The Pars Special Economic Energy Zone (PSEEZ) is located in the south of Iran, on the northern coastline of the Persian Gulf. This area was established in 1998 for the utilization of south Pars field oil and gas resources. This field is one of the largest gas resources in the world and contains about 6% of the total fossil fuels known. Petrochemical industries, gas refineries and downstream industries are being constructed in this area. At present there are three gas refineries in operation and five more gas refineries are under construction. In this study, different types of solid waste including municipal solid waste (MSW) and industrial wastes were investigated separately. The aim of the study was to focus on the management of the industrial wastes in order to minimize the environmental impact. In the first stage, the types and amounts of industrial waste in PSEEZ were evaluated by an inventory. The main types of industrial waste are oil products (fuel oil, light oil, lubricating oil), spent catalysts, adsorbents, resins, coke, wax and packaging materials. The waste management of PSEEZ is quite complex because of the different types of industry and the diversity of industrial residues. In some cases recycling/reuse of waste is the best option, but treatment and disposal are also necessary tools. Recently a design has been prepared for a disposal site in PSEEZ for the industrial waste that cannot be reused or recycled. The total surface area of this disposal site where the industrial waste should be tipped for the next 20 years was estimated to be about 42 000 m2.     

山东省工业废水排放量GM（1,1）高阶残差预测模型

介绍了ＧＭ（１，１）高阶残差预测模型之建模方法。以山东省工业废水排放量为例，建立了ＧＭ（１，１）高阶残差预测模型。结果表明，ＧＭ（１，１）高阶残差模型经ＧＭ（１，１）模型更贴近实际。     

生物监测法查找危害水稻的污染源

某镇的稻田因受工业污水污染而导致水稻大面积死苗,采用生苗监测方法直找污染源,用５个工厂的污水和污泥进行盆栽水稻试验,结果表明,其中两个工厂的污水和污泥有较强的毒性全对稻苗造成严重伤害;另外两个工厂的污泥也会对稻苗造成严重伤害,有关工厂采取严格的环境保护措施后,１９９７年的水稻受害面积比１９９６年减少了９５％。     

厌氧氨氧化技术在废水脱氮领域的应用进展

厌氧氨氧化技术是一种以厌氧氨氧化自养菌脱氮为核心的新型生物脱氮技术,具有良好的应用前景。本文对厌氧氨氧化过程的反应机理、菌种的生长特性及种类分布进行了详细介绍,总结了厌氧氨氧化技术在不同废水脱氮领域的研究及应用情况。指出,种泥缺乏是当前限制厌氧氨氧化技术大规模工业推广的瓶颈,并就厌氧氨氧化技术在应用过程中遇到的问题给出了相应建议。     

Planning hazardous waste reduction and treatment strategies: An optimization approach

An industry faced with escalating off-site waste disposal costs will often consider increasing on-site waste treatment capacity or the implementation of a waste reduction program. Waste reduction program options include input and process changes that decrease waste quantity and waste toxicity. Tradeoffs between capital investment and economy-of-scale in development are required, and will depend on the industry and the current level of waste reduction. A dynamic programming model is developed that allows the investigation of waste reduction and treatment strategies for industries in a changing regulatory and economic environment. The applicability of the optimization approach to industrial waste generators is illustrated through a hypothetical but representative industrial waste management example.     

Competitive Adsorption of Pb(II) and Phenol Onto Modified Chitosan/Vermiculite Adsorbents

Journal of Polymers and the Environment - Many industrial wastewaters are contaminated with both heavy metal ions and organic compounds, posing a major threat to public health and the ecosystem. In...     

Report on waste dump sites around Bangalore

The present work aims at identifying, locating and quantifying the industrial and domestic waste dump sites located in and around Bangalore urban and rural districts of Karnataka state, India. Bangalore has a population of 6 million and has more than 2000 industries working at various industrial estates and other locations around the city. It was reported that about 1500 tons of municipal waste per day is being generated from Bangalore city. Studies reveal that there is no scientific treatment and disposal facility for scientific management of the waste generated. The waste from industries and community areas is disposed in an unscientific manner at several open dump sites across the city. There are more than 60 dump sites consisting of both municipal and industrial waste existing in and around Bangalore city; the locations are totally unhygienic. Based on the experience gained from field visits, physical observation of the waste disposed, quantity and nature of the waste disposed, each site was given with a grading based on polluting potential of the site. For selected sites, ground water samples were collected from nearby surface or bore wells and analysed for possible contamination. From the study, it was found that the site needed immediate attention and comes under severe impact category of 27 numbers and that of medium and low impact are 18 and 6 numbers, respectively. The disposal sites have got tremendous potential of spreading the epidemics/diseases to the people living in their immediate vicinity and at nearby places.     

Energy and Enviromental Issues in Turkey

The current and future projections of energy utilisation and related environmental impact has been given. Due to the heavy dependance on low grade lignites and imported hard coal, Turkey is going to have problems in the control of CO₂ emissions. Turkey was at first included as an Annex I country according to Kyoto Protocol. Later, it has been removed from the list which is justified considering the previous international environmental impact control applications and relatively much lower energy utilisation in Turkey, compared to Annex I countries. Therefore, Turkey has been removed from the Annex I list.Turkish power generation, industrial and transportation sector will be facing a difficult challenge over the coming 20 yr in complying with environmental impact levels. The developments in the liberalisation of Turkish energy sector since the 1980's is a positive step to overcome the problems.     

Municipal solid waste management strategies in Turkey

Municipal solid waste (MSW) is a major environmental problem in Turkey, as in many developing countries. Problems associated with municipal solid waste are difficult to address, but efforts towards more efficient collection and transportation and environmentally acceptable waste disposal continue in Turkey. Although strict regulations on the management of solid waste are in place, primitive disposal methods such as open dumping and discharge into surface water have been used in various parts of Turkey. This study presents a brief history of the legislative trends in Turkey for MSW management. The study also presents the MSW responsibility and management structure together with the present situation of generation, composition, recycling, and treatment. The results show that approximately 25 million ton of MSW are generated annually in Turkey. About 77% of the population receives MSW services. In spite of efforts to change open dumping areas into sanitary landfills and to build modern recycling and composting facilities, Turkey still has over 2000 open dumps.     

Odor compounds in waste gas emissions from agricultural operations and food industries

In the last decades, large-scale agricultural operations and food industries have increased. These operations generate numerous types of odors. The reduction of land areas available for isolation of agricultural and food processing industrial operations from the public area and the increase in sensitivity and demand of the general public for a clean and pleasant environment have forced all of these industries to control odor emissions and toxic air pollutants. To develop environmentally sound, sustainable agricultural and food industrial operations, it is necessary to integrate research that focuses on modern analytical techniques and latest sensory technology of measurement and evaluation of odor and pollution, together with a fundamental knowledge of factors that are the basic units contributing to the production of odor and pollutants. Without a clear understanding of what odor is, how to measure it, and where it originates, it will be difficult to control the odor. The present paper reviews the available information regarding odor emissions from agricultural operations and food industries by giving an overview about odor problems, odor detection and quantification, and identifying the sources and the mechanisms that contribute to the odor emissions. Finally, ways of reducing or controlling the odor problem are discussed.     

Industrial wastewater analysis: a toxicity-directed approach

Methods of toxicity-directed analysis have been developed for the characterization and identification of toxic organic constituents in industrial wastewater. Sequential solid-phase extraction is followed by high-performance liquid chromatography (HPLC) fractionation or by automated multiple development thin-layer chromatography fractionation (AMD–TLC) of the toxic extracts. Toxic fractions were finally analyzed by gas chromatography–mass spectroscopy (GC–MS). Toxicity was detected before each of the analytical steps by the bioluminescence inhibition of Vibrio fischeri, which was performed on microtiter plates and on the developed TLC plates. While sequential extraction broadens the polarity range of the procedure, the new variants of the luminescence test make the method very versatile and fast. The potential of this kind of toxicity-directed analysis with respect to resolution and polarity of analytes is discussed and applications to partial effluents of a tannery, to molasses wastewater and a spent dyeing bath are presented. A variety of benzothiazoles and more polar organics were identified as major toxic compounds in tannery effluents. It is shown that the procedures are well suited to detect individual toxic components in complex industrial wastewaters. The use of LC-MS is proposed to extend the polarity range of the final identification step. ©     

碱性和弱酸性染料混合废水处理方法

采用“中和－氯氧化－电化学反应－催化氧化”组合工艺处理碱性、弱酸性染料混合废水,可使混合废水的ＣＯＤ由１４５６０ｍｇ／Ｌ降至２１５ｍｇ／Ｌ,色度由５０００倍降至１０倍以下。试验结果表明,不同染料废水混合后可发生沉淀效应,若组合得当,可使染普废得到很大程度的净化;ＣｌＯ２对某些染料废水具有良好的去除ＣＯＤ和脱色作用。     

Perspectives for pilot scale study of RDF in Istanbul,Turkey

Municipal solid waste (MSW) is one of the most important environmental problems arising from rapid urbanization and industrialization. The use of alternative fuels in rotary kilns of cement plants is very important for reducing cost, saving fossil fuels and also eliminating waste materials, accumulated during production or after using these materials. Cement industries has an important potential for supplying preferable solutions to the waste management. Energy recovery from waste is also important for the reduction of CO₂ emissions.This paper presents an investigation of the development of refuse derived fuel (RDF) materials from non-recycling wastes and the determination of its potential use as an alternative fuel in cement production in Istanbul, Turkey. RDF produced from MSW was analyzed and its effects on cement production process were examined. For this purpose, the produced RDF was mixed with the main fuel (LPG) in ratios of 0%, 5%, 10%, 15% and 20%. Then chemical and mineralogical analyses of the produced clinker were carried out. It is believed that successful results of this study will be a good example for municipalities and cement industries in order to achieve both economic and environmental benefits.     

二氧化钛光催化降解处理染料废水

研究了TiO2的添加量，粒径大小，作用时间对3种染料废水脱色率的影响及TiO2薄膜对染料废水的处理效果。对于汽巴克染绿和直接大红染料溶液，适宜的TiO2添加量均为5g/L，紫外灯照射60min，其脱色率大于85％。对于阳离子红染料溶液，适宜的TiO2添加量为3g/L，其脱色率为83．5％。粒径小的TiO2作用效果优于粒径大的效果。在室温和适宜的TiO2添加量的条件下，随照射时间的延长，太阳光的光催化降解效果渐渐接近于紫外光的光催化降解效果。将TiO2薄膜固定在陶瓷睛上，有利于TiO2的重复使用。     

Physico-chemical treatment of marble processing wastewater and the recycling of its sludge.

In the first part of this study, the treatability of marble processing wastewater by the coagulation-flocculation process was investigated. Optimum coagulant-flocculant doses for turbidity removal in wastewater from the cutting, faience and equalization processes were determined as 500, 200 and 500 ppm of Al2(SO4)3; 300, 500 and 300 ppm of FeCl3 and 600, 400 and 200 ppm of Agrofloc 100 (AGRON Water Treatment Technologies and Chemical Marketing Industry and Trade Limited Company, Izmir, Turkey), respectively. It was found that the removal of total solids from cutting and equalization process wastewaters was highest for the 100 ppm dosage of all chemicals used. The amount of total solids removed from faience process wastewater by Agrofloc 100 was higher than that removed by the other chemicals used. The removals of suspended solids from cutting, faience and equalization process wastewaters were similar to each other for each of the chemicals. The pH values after treatment by Agrofloc 100 were higher than the values determined after treatment by other chemicals for all process wastewater. Electrical conductivity values, however, were lower for Agrofloc 100 than for the others. Settled sludge volume experiments showed that settled sludge volumes decreased with time. The results of the quiescent settling experiment showed that the settling type could be termed flocculent settling. In the second part of the study, the usage of waste sludge from marble processing as an additive material in cement was investigated. The waste sludge originated from the wastewaters of different steps of the marble processing plant. Waste sludge was replaced with cement at various percentages by weight to prepare the mixtures of mortar. The specimens poured into the moulds were held for 24 h, removed from the moulds and held again for 28 days in lime-saturated water at 23 degrees C. Compressive and flexural strengths were evaluated with respect to percentages of waste sludge replaced with cement. The maximum compressive and flexural strengths were observed for specimens containing a 6% waste sludge when compared with control and it was also found that waste sludge up to 9% could effectively be used as an additive material in cement.     

Does industrial waste taxation contribute to reduction of landfilled waste? Dynamic panel analysis considering industrial waste category in Japan

Waste taxes, such as landfill and incineration taxes, have emerged as a popular option in developed countries to promote the 3Rs (reduce, reuse, and recycle). However, few studies have examined the effectiveness of waste taxes. In addition, quite a few studies have considered both dynamic relationships among dependent variables and unobserved individual heterogeneity among the jurisdictions. If dependent variables are persistent, omitted variables cause a bias, or common characteristics exist across the jurisdictions that have introduced waste taxes, the standard fixed effects model may lead to biased estimation results and misunderstood causal relationships. In addition, most existing studies have examined waste in terms of total amounts rather than by categories. Even if significant reductions in total waste amounts are not observed, some reduction within each category may, nevertheless, become evident.Therefore, this study analyzes the effects of industrial waste taxation on quantities of waste in landfill in Japan by applying the bias-corrected least-squares dummy variable (LSDVC) estimators; the general method of moments (difference GMM); and the system GMM. In addition, the study investigates effect differences attributable to industrial waste categories and taxation types. This paper shows that industrial waste taxes in Japan have minimal, significant effects on the reduction of final disposal amounts thus far, considering dynamic relationships and waste categories.