Environmental Hazard- Assessment of chemicals and products

Part II: Persistence and Degradability of Organic Chemicals The criteria “Persistence” and “Degradability” are defined and explained, starting from the “functional” definition of the environment. In this definition, theenvironment is the counterpart of thetechnosphere, which consists of all processes controlled by man. A substance is persistent if there are no sinks (degradation processes). It is shown that persistence is the central and most important critérium of environmental hazard assessment of organic chemicals. It follows that all substances released into the environment should be degradable, preferentially into small inorganic molecules (mineralization). As examples for persistent substances, the polychlorinated biphenyls (PCB), the chlorofluorohydrocarbons (CFC), bis (2-ethylhexyl) phthalate (DEHP), and 2,3,7,8-tetrachloro-dibenzo-dioxin (TCDD) are discussed. Finally, an attempt to quantify persistence is made.     

Uptake and metabolism of 2,4,6-trinitrotoluene in higher plants

The fate of the explosive 2,4,6-TNT in plants is of major interest. Therefore, a method was developed to analyse TNT and derivatives in plant tissue. The method was utilized to investigate the uptake and metabolism of TNT inMedicago sativa andAllium schoenoprasum grown in hydroponic cultures containing TNT levels of 0.1 to 10 mg/1. Detectable concentrations of nitrotoluenes were significantly higher inAllium schoenoprasum than inMedicago sativa. The uptake of TNT in plants was directly related to the initial TNT level. The principal nitroaromatic components in roots and shoots of both plant species were identified as 4-ADNT and 2-ADNT in equal amounts, with substantially less TNT.     

Dietary and environmental estrogens and antiestrogens and their possible role in human disease

Recent reports have suggested that dietary and environmental estrogens such as organochlorine pollutants may play a role in the increased incidence of breast cancer in women and disorders of the male reproductive tract. For example, elevated levels of DDE and polychlorinated biphenyls (PCB) have been measured in women with breast cancer. However, it should also be noted that numerous environmental and dietary compounds have also been characterized as antiestrogenic and as inhibitors of mammary cancer cell growthin vitro and/orin vivo. Some of these compounds include 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and related compounds, polynuclear aromatic hydrocarbons (PAH), other naturally-occurring TCDD receptor agonists, retinoids, phorbol esters, terpenes, fatty acids, and polysaccharides. Thus, it is possible that dietary and environmental estrogens and antiestrogens may be contra-active, and these interactions must be considered in the overall risk assessment of the potential adverse human and environmental health impacts of these chemicals.     

Toxicity testing of highly volatile chemicals with green algae

A gas-tight system for toxicity testing of highly volatile chemicals with the green algaChlamydomonas reinhardtii was developed. The procedure permits maintenance of constant and defined concentrations of the tested compounds in the vessels. To ensure sufficient CO₂-supply, new bipartite test vessels were used. These vessels allowed spatial separation of a HCO₃-/CO ₃ ^2? buffer used for CO₂ supply and the alga culture to avoid growth inhibition due to ionic strength. Several volatile chlorinated hydrocarbons have been tested. Their EC10 values were several orders of magnitude lower than those obtained with open test systems.     

Deposition of semivolatile organic compounds to spruce needles

The deposition of atmospheric tetrachlorobenzene, pentachlorobenzene, hexachlorobenzene, α-HCH, γ-HCH, DDT, DDE and the PCB congeners 52, 101, 138, 153 and 180 to spruce needles (Picea abies) was estimated for a period of 9 months. Accumulation in spruce as a result of dry gaseous deposition, particle bound deposition and wet deposition was calculated on the basis of the corresponding deposition rates and the compounds’ concentrations in the different atmospheric compartments. The comparison of the calculated values with the concentrations of the compounds measured in 9-month-old spruce needles showed that for many compounds each deposition pathway could explain a large part of the concentrations found in the needles.     

Bioconcentration of superlipophilic persistent chemicals

According to present understanding, persistent superlipophilic chemicals — such as octachlorodibenzo-p-dioxin, octachlorodibenzofuran, Mirex etc — with log K_ow > 6 and cross sections > 9.5 Å, bioconcentrate in aquatic organisms only little from ambient water. The most convincing argument against it is that in bioconcentration experiments with superlipophilic chemicals amounts applied exceeded water solubility by several orders of magnitude. This paper describes various methods for determining bioconcentration factors (BCF) of superlipophilic compounds. As exemplified with octachlorodibenzo-p-dioxin, BCF values evaluated by these methods match well with those calculated by QSARs for fish and mussels based on log K_ow and water solubility. As expected, these BCF values exceed previous values by several orders of magnitude. For BCF evaluation of superlipophilic chemicals in aquatic organisms we recommend:

1. flow-through systems, kinetic method (OECD guideline No. 305 E)
2. ambient concentrations < water solubility
3. during the uptake and especially during the elimination phase no toxic effects of the test organisms should occur.

     

Surfactant solubilization of hydrophobic compounds in soil and water

Reductions in the apparent soil-water partition coefficients (K_d ^*) for 28 polychlorinated biphenyls (PCBs) caused by the surfactant sodium dodecylsulphate (SDS) in the aqueous phase were studied. Above the critical micelle concentration (CMC) of the surfactant, K_d ^* was reduced by 2–3 orders of magnitude, but even far below CMC at environmentally relevant surfactant concentrations significant reductions in K_d ^* were observed. The plot of the soil-water partition coefficient (K_d) divided by K_d ^* versus the concentration of SDS allowed for the calculation of monomer (K_mn ^oc) and micellar (K_mc ^oc) surfactant-water partition coefficients normalized to organic carbon for each PCB congener. K_mn ^oc values were comparable with published values for the partition of PCBs between natural dissolved organic matter and lake water. K_mc ^oc values were up to 30 times higher than K_mn ^oc values and comparable with published octanol-water distribution coefficients. The findings of the present study underline the potential of surfactants at concentrations below their CMC to mobilize otherwise strongly bound hydrophobic compounds in soil-water systems.     

A study of the adsorption of NH3 and SO2 on leaf surfaces

The adsorption of NH₃ and SO₂ on the external leaf surface of bean (Phaseolus vulgaris L.) and poplar (Populus euramericana L.) was studied. The adsorbed quantities increased strongly with increasing air humidity, indicating that water on the leaf surface plays a major role in the interaction of these gases with the leaf surface. On the other hand temperature in the range between 15 and 26°C had no significant influence. The adsorbed quantities of NH₃ at a specific air humidity appeared to be proportional to NH₃ concentration. This proportionality was less clear for SO₂. The affinity of SO₂ for the leaf surface was found to be approximately twice that of NH₃. A mixture of these gases in the air mutually stimulated their adsorption on the leaf. No significant desorption or uptake of these gases through the cuticle could be detected, indicating that the bulk of the adsorbed gases remains associated with the cuticle.     

Determination of microbial activity in activated sewage sludge by dimethyl sulphoxide reduction

A method was developed to determine the dimethyl sulphoxide (DMSO) reduction rate in activated sewage sludge at nearly natural conditions. Linearity of microbially produced dimethyl sulphide with incubation time and sample size was shown. Apart from a fast, sensitive and highly reproducible automatic analysis of dimethyl sulphide, simultaneous determination of mineralisation, respiration and phenol degradation rates was possible. The DMSO reduction rate of samples taken from a municipal sewage plant ranged between 2 and 3 μmol/(g dry matter · h), respiration and mineralisation rates between 30 and 80 μmol/(g · h). Added¹³C₆-phenol was completely degradated after 96 h of incubation. A half-life of 14 h was calculated assuming first order decay. Dose response curves were obtained by incubating samples for 2, 6, 25, and 96 hours after addition of pentachlorophenol. At an incubation time of 6 h, the EC₅₀ values ranged from 20 mg/L (DMSO reduction) to 30 mg/L (phenol degradation) up to 180 mg/L (respiration and mineralisation). Increasing the incubation time to 96 h resulted in a lower EC₅₀ of 9 mg/L for DMSO reduction, whereas it increased to 500 mg/L for respiration and mineralisation.     

Adsorption of Remazol Red 198 onto magnetic N-lauryl chitosan particles: equilibrium, kinetics, reuse and factorial design

Purpose

The discharge of colored effluents from industries is an important environmental issue and it is indispensable to remove the dyes before the water gets back to the rivers. The magnetic adsorbents present the advantage of being easily separated from the aqueous system after adsorption by positioning an external magnetic field.

Methods

Magnetic N-lauryl chitosan (L-Cht/??-Fe₂O₃) particles were prepared and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, transmission electron microscopy, and vibrating sample magnetometry. Remazol Red 198 (RR198) was used as a reactive dye model for adsorption on L-Cht/??-Fe₂O₃. The adsorption isotherms were performed at 25°C, 35°C, 45°C, and 55°C and the process was optimized using a 2³ factorial design (analyzed factors: pH, ionic strength, and temperature). The desorption and regeneration studies were performed in a three times cycle.

Results

The characterization of the material indicated that the magnetic particles were introduced into the polymeric matrix. The pseudo-second order was the best model for explaining the kinetics and the Langmuir?CFreundlich was the best-fitted isotherm model. At room temperature, the maximum adsorption capacity was 267?mg?g^?1. The material can be reused, but with a decrease in the amount of adsorbed dye.

Conclusions

L-Cht/??-Fe₂O₃ is a promising material to remove RR198 and probably other similar reactive dyes from aqueous effluents.     

Immunoassay monitoring of polychlorinated biphenyls (PCBs) in the Great Lakes

Although polychlorinated biphenyls (PCBs) are no longer manufactured, they are still entering the environment. In some compartments of the environment, PCB concentrations are a serious concern. This is especially true in compartments which accumulate PCBs, and in food items consumed by humans and wildlife. Also, there are situations in which management decisions require rapid, sensitive, accurate measurements, which can be made in real time under field conditions. Methods to use an enzyme-linked immunosorbent assay (ELISA) for PCBs were developed and applied to sediments and fish muscle homogenates collected from the Great Lakes. The extraction methods developed can be applied in the field with non-hazardous solvents, in the absence of sophisticated laboratory equipment. The method detection limit for PCBs in dimethyl sulfoxide (DMSO) extracts of sediment was 0.9 mg/kg. For PCBs in isopropanol extracts of fish tissue, the method detection limit was 0.6 mg/kg. The resolution of the ELISA was 0.83 mg/kg at 1.1 mg/kg and 1.6 mg/kg at 1.7 mg/kg, for sediment and fish tissue, respectively.     

Environmental hazard — Assessment of chemicals and products

Part III: The Limits to Single Compound Assessment The principles and basic assumptions of single compound assessment are briefly reviewed. Limitations to this approach are shown, especially with regard to complex mixtures of similar substances, substitution products, and complicated (final) products containing chemicals and materials produced by the chemical industry. A new thinking in product lines and life cycles is emerging, leading to new assessment methods. In some cases, substitution has not improved the environmental performance of products, since very similar chemicals were used as substitutes.     

Environmental risk assessment of existing chemicals

Most of the existing chemicals of high priority have been released into the environment for many years. Risk assessments for existing chemicals are now conducted within the framework of the German Existing Chemicals Program and by the EC Regulation on Existing Substances. The environmental assessment of a chemical involves:

1. exposure assessment leading to the derivation of a predicted environmental concentration (PEC) of a chemical from releases due to its production, processing, use, and disposal. The calculation of a PEC takes into account the dispersion of a chemical into different environmental compartments, elimination and dilution processes, as well as degradation. Monitoring data are also considered.
2. effects assessment. Data obtained from acute or long-term toxicity tests are used for extrapolation on environmental conditions. In order to calculate the concentration with expectedly no adverse effect on organisms (Predicted No Effect Concentration, PNEC) the effect values are divided by an assessment factor. This assessment factor depends on the quantity and quality of toxicity data available.

In the last step of the initial risk assessment, the measured or estimated PEC is compared with the PNEC. This “risk characterization” is conducted for each compartment separately (water, sediment, soil, and atmosphere). In case PEC > PNEC an attempt should be made to revise data of exposure and/or effects to conduct a refined risk characterization. In case PEC is again larger than PNEC risk reduction measures have to be considered.     

Determination of atrazine in rainfall and surface water by enzyme immunoassay

Rainwater and surface water from four sites in Germany (Bavaria and Lower Saxony) were analyzed for atrazine by enzyme immunoassay from June 1990 until October 1992. The limit of quantification of the immunoassay was 0.02 μg/L with a middle of the test at 0.2 μg/L. About 60 % of the samples contained measurable amounts of atrazine. Seasonal trends were observed, with the highest concentration in the summer months of up to 4 μg/L for rainwater and up to 15 μg/L for surface waters. The highest concentrations were found in agricultural areas, while in the investigated national parks up to 0.56 μg/L could be detected in rain water. This points to long-range atmospheric transport from agricultural areas to pristine national parks. Samples from forest stands usually showed higher atrazine concentrations than samples from open fields. Deposition rates of 10 – 50 μg/m² · yr were observed in the national parks and 10–180 μg/m² · yr at the agricultural sites. Comparison of results obtained by enzyme immunoassay and GC/MS showed a good correlation of r = 0.95.     

Simulation of pesticide runoff at Rosemaund Farm (UK) using the SoilFug model

A validation exercise of the SoilFug model using field runoff data from Rosemaund Farm (UK) is described. A comparison has been made of modelled and measured concentrations of several pesticides in surface water and soil during and after specific rain events following application. The field experiments were designed to obtain data on rainfall, outflows of water, pesticide application rates and concentrations in soil and water. The results were satisfactory for the undissociated pesticides (atrazine, carbofuran, dimethoate, isoproturon, lindane, simazine and trifluralin), whose concentrations in water were mostly predicted within an order of magnitude of measured data. The results for the dissociated pesticides (dichlorprop, MCPA, mecoprop) were less satisfactory, giving generally much higher predicted concentrations in water. The use of the SoilFug model is suggested for the calculation of predicted environmental concentrations (PECs) in water, since it generally produces acceptable results from a relatively small set of input data, most of which is generally available.     

Extractability of water-soluble soil organic matter as monitored by spectroscopic and chromatographic analyses

Purpose

Cold and hot water processes have been intensively used to recover soil organic matter, but the effect of extraction conditions on the composition of the extracts were not well investigated. Our objective was to optimize the extraction conditions (time and temperature) to increase the extracted carbon efficiency while minimizing the possible alteration of water extractable organic matter of soil (WEOM).

Method

WEOM were extracted at 20°C, 60°C, or 80°C for 24?h, 10?C60?min, and 20?min, respectively. The different processes were compared in terms of pH of suspensions, yield of organic carbon, spectroscopic properties (ultraviolet?Cvisible absorption and fluorescence), and by chromatographic analyses.

Results

For extraction at 60°C, the time 30?min was optimal in terms of yield of organic carbon extracted and concentration of absorbing and fluorescent species. The comparison of WEOM 20°C, 24?h; 60°C, 30?min; and 80°C, 20?min highlighted significant differences. The content of total organic carbon, the value of specific ultraviolet absorbance (SUVA₂₅₄), the absorbance ratio at 254 and 365?nm (E ₂/E ₃), and the humification index varied in the order: WEOM (20°C, 24?h)?Conclusions For the soil chosen, extraction at 60°C for 30?min is the best procedure for enrichment in organic chemicals and minimal alteration of the organic matter.     

Adsorption of chloridazon from aqueous solution on modified kerolite-rich materials

The adsorption of chloridazon (5-amine-4-chloro-2-phenylpyridazin-3(2H)-one) on kerolite samples heated at 110°C (K-110), 200°C (K-200), 400°C (K-400), 600°C (K-600) and acid-treated with H₂SO₄ solutions of two different concentrations (0.25 and 0.5 M) (K-0.25 and K-0.5, respectively) from pure water at 25°C has been studied by using batch and column experiments. The adsorption experimental data points were fitted to the Freundlich equation in order to calculate the adsorption capacities (K_f) of the samples; K_f values ranged from 184.7 mg kg^?1 (K-0.5) up to 2253 mg kg^?1 (K-600). This indicated that the heat treatment given to the kerolite greatly increases its adsorption capacity for the herbicide whereas the acid treatment produces a clear decrease in the amount of chloridazon adsorbed. The removal efficiency (R) was also calculated; R values ranging from 52.8% (K-0.5) up to 88.3% (K-600). Thus, the results showed that the 600°C heat-treated kerolite was more effective in relation to adsorption of chloridazon and it might be reasonably used in removing this herbicide from water.     

Polychlorinated dibenzo-p-dioxins (PCDDs) and furans (PCDFs) in urban air and deposition in the United Kingdom

Polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) have been monitored in air and deposition at four UK urban sites (London, Cardiff, Manchester and Stevenage) since the beginning of 1991; data from the first 2 years are presented here. Median Σ2,3,7,8-substituted PCDD/F concentrations in air were 3.2, 4.0, 3.5 and 2.6 pg/m³ respectively for London, Cardiff, Manchester and Stevenage. Median Σ2,3,7,8-substituted PCDD/F deposition fluxes were 1.5 ng/m²/day in London, 1.4 ng/m²/day in Cardiff and Manchester and 0.79 ng/m²/day in Stevenage. Seasonal variations in the PCDD/F concentrations were observed at all sites for both air and deposition, with concentrations/fluxes generally elevated during the winter.     

Observations on long-term air-soil exchange of organic contaminants

Evidence for long-term changes in the soil composition of selected organic compounds, brought about by exchanges with the atmosphere, is briefly reviewed. In the case of some compounds — such as benzo(a)pyrene and octachlorodibenzo-p-dioxin, soils may be significant long-term environmental sinks for atmospherically-derived material. In other cases — such as phenanthrene and some of the lighter PCBs, de-gassing or volatilisation from soil back to the air can occur under certain conditions. Hence the soil may act as a “short-term” sink, and a potential source to atmosphere. Indeed, for some ‘semi-volatile’ compounds used in large quantities in the past — such as PCBs, soil outgassing may actually be an extremely important source to contemporary air. Furthermore, soil outgassing from areas of former high use may provide an important driving mechanism for continued “global cycling” of a range of semi-volatile organochlorine compounds.     

Brown rust disease control in winter wheat: I. Exploring an approach for disease progression based on night weather conditions

An empirical approach for simulating the infection and progress of leaf rust (caused by Puccinia triticina) during stem elongation on winter wheat was analysed for the 2000 to 2006 growing seasons. The approach was elaborated based on night weather conditions (i.e., air temperature, relative humidity and rainfall) and leaf rust occurrences. Data from three consecutive cropping seasons (2000–2002) at four representative sites of the Grand-Duchy of Luxembourg were used in the set-up phase. The capability to correctly simulate the occurrence expression of P. triticina infections on the upper leaf layers was then assessed over the 2003–2006 period. Our study revealed that the development of leaf rust required a period of at least 12 consecutive hours with air temperatures ranging between 8 and 16 °C, a relative humidity greater than 60 % (optimal values being 12–16 °C and up to 80 % for air temperatures and relative humidity, respectively) and rainfall less than 1 mm. Moreover, leaf rust occurrences and infections were satisfactorily simulated. The false alarm ratio was ranged from 0.06 to 0.20 in all the study sites. The probability of detection and critical success index for WLR infection were also close to 1 (perfect score).