Association between environmental exposure to p,p′-DDE and lindane and semen quality

Scientific concern exists about the toxic effect of dichlorodiphenyldichloroethylene (p, p′-DDE) and lindane on male infertility, and the mechanism underlying male reproductive toxicity of this pesticide remains unanswered. We investigated not only the possible association between the chlorinated pesticide levels and semen quality in nonoccupationally exposed men, but also the probable mode of action using mitochondrial membrane potential (MMP), reactive oxygen species (ROS), lipid peroxidation (LPO), and sperm chromatin structure assay (SCSA). A study in 278 men (21–40 years old) who visited Obstetrics and Gynecology Department, KGMU, Lucknow, for semen analysis was conducted. We performed semen analysis according to the WHO guidelines, while p, p′-DDE and lindane analysis was done by the GLC and LPO by the spectrophotometer, and the sperm mitochondrial status, ROS, and SCSA with the flow cytometer. The questionnaire data showed no significant difference in the demographic characteristics between the two groups, i.e., trying to conceive >1 year and proven fertility. However, a significant difference in the concentration of p, p′-DDE and lindane was observed between the groups. When the subjects were divided among four categories by quartile of exposure, the subjects in the highest quartile showed low sperm motility as compared to the subjects in the lowest quartile. Pearson’s correlation showed a significant negative correlation between semen p, p′-DDE, lindane level, and sperm quality and positive association with the number of cells with depolarized mitochondria, elevation in ROS production and LPO, and DNA fragmentation index (DFI). The findings are suggestive that these toxicants might cause a decline in semen quality, and these effects might be ROS, LPO, and mitochondrial dysfunction mediated.     

Residues of p,p’-DDT and hexachlorobenzene in human milk from Indonesian women

Milk from Indonesian women (n = 4) was analysed for p,p’-DDT and the fungicide, hexachlorobenzene (HCB). p,p’-DDT was found in all of the samples and at levels that are amongst the highest reported anywhere in the world in 3 of the samples. HCB was found in all 4 samples, 1 sample had an exceptionally high level. The high residue of HCB suggested exposure by eating dressed grain, major environmental contamination or direct exposure when handling the fungicide. These are the first data on pesticide residues in milk from Indonesian women which demonstrate general exposure to p,p’-DDT and HCB.     

Deposition and regional distribution of HCHs and p,p′-DDX in the western and southern Tibetan Plateau: records from a lake sediment core and the surface soils

Tibetan Plateau is the world’s highest plateau, which provides a unique location for the investigation of global fractionation of organochlorine pesticides (OCPs). In this study, deposition and regional distribution of HCHs and p,p′-DDX in the western and southern Tibetan Plateau were investigated by the records from a sediment core of Lake Zige Tangco and 24 surface soils. Concentration of ΣHCHs in the surface soils of the western Tibetan Plateau was much higher than that of the southern part. Maximum fluxes of α-, β-, and δ-HCH in the sediment core were 9.0, 222, and 21 pg cm^?2 year^?1, respectively, which appeared in the mid-1960s. Significant correlations were observed between concentrations of α- and β-HCH in both the surface soils and the sediment core. Concentrations of both α- and β-HCH increased with the inverse of the average annual temperature of these sites. γ-HCH became the dominant isomer of HCHs after the late 1970s, and reached the maximum flux of 160 pg cm^?2 year^?1 in the early 1990s. There were no significant correlations between concentrations of γ-HCH and the other isomers in both the surface soils and the sediment core. The results suggested that there was input of Lindane at scattered sites in this area. In contrast to ΣHCHs, concentration of Σp,p′-DDX in the surface soils of the southern part was much higher than that of the western part. Maximum flux of Σp,p′-DDX was 44 pg cm^?2 year^?1, which appeared in the mid-1960s. Local emission of p,p′-DDT was found at scattered sites. This study provides novel data and knowledge for the OCPs in the western and southern Tibetan Plateau, which will help understand the global fractionation of OCPs in remote alpine regions.     

PCB153 and p,p′-DDE disorder thyroid hormones via thyroglobulin,deiodinase 2, transthyretin,hepatic enzymes and receptors

Polychlorinated biphenyls (PCBs) and DDT are widespread environmental persistent organic pollutants that have various adverse effects on reproduction, development and endocrine function. In order to elucidate effects of PCBs and DDT on thyroid hormone homeostasis, Sprague–Dawley rats were dosed with PCB153 and p,p′-DDE intraperitoneally (ip) for five consecutive days and sacrificed within 24 h after the last dose. Results indicated that after combined exposure to PCB153 and p,p′-DDE, total thyroxine , free thyroxine, total triiodothyronine, and thyroid-stimulating hormone in serum were decreased, whereas free triiodothyronine and thyrotropin-releasing hormone were not affected. Thyroglobulin and transthyretin levels in serum were significantly reduced. mRNA expression of deiodinases 2 (D2) was also suppressed, while D1 and D3 levels were not significantly influenced after combined exposure. PCB153 and p,p′-DDE induced hepatic enzymes, UDPGTs, CYP1A1, CYP2B1, and CYP3A1 mRNA expressions being significantly elevated. Moreover, TRα1, TRβ1, and TRHr expressions in the hypothalamus displayed increasing trends after combined exposure to PCB153 and p,p′-DDE. Taken together, observed results indicate that PCB153 and p,p′-DDE could disorder thyroid hormone homeostasis via thyroglobulin, deiodinase 2, transthyretin, hepatic enzymes, and hormone receptors.     

Use of sensitive methods for detection of DNA damage on human lymphocytes exposed to p,p′-DDT: Comet assay and new criteria for scoring micronucleus test

Wide distribution, stability and long persistence in the environment of dichlorodiphenyltrichloroethane (DDT), probably the best-known and most useful insecticide in the world, imposes the need for further examination of the effect of this chemical on human health and especially on the human genome. In this study, peripheral blood human lymphocytes from a healthy donor were exposed to 0.025 mg/L concentration of p,p′-DDT at different time periods (1, 2, 24 and 48 h). For the assessment of genotoxic effect, the new criteria for scoring micronucleus test and alkaline comet assay were used. Both methods showed that p,p′-DDT induces DNA damage in low concentration used in this research. Results of micronucleus test showed a statistically significant (p < 0.05) genotoxic effect of p,p′-DDT on human lymphocytes compared with corresponding control and a different exposure time. A comet assay also showed increased DNA damage caused in p,p′-DDT-exposed human lymphocytes than in corresponding control cells for the tail length. Results obtained by measuring the level of DNA migration and incidence of micronuclei (MN), nucleoplasmic bridges (NPBs) and nuclear buds (NBUDs) indicate the sensitivity of these tests and their application in detection of primary genome damage after long-term exposure to establish the effect of p,p′-DDT on human genome.     

Laboratory studies on volatilization and mineralization of 14c‐p,p'‐DDT in soil,release of bound residues and dissipation from solid surfaces

Abstract

In support of field data, laboratory studies were conducted on volatilization, mineralization and binding of ¹⁴C‐p,p'‐DDT in soils at Sao Paulo. Incubation of soil for 6 weeks did not result in volatilized organics or mineralization; with >95% extractable radiocarbon in the form of p,p'‐DDT. Small amounts of bound residues (1.8%) were detected in soil. These data confirm the very slow dissipation of DDT in the field which presumably relates to the acidic pH of soil (4.5–4.8).

Bound ¹⁴C‐residues in soils treated with ¹⁴C‐p,p'‐DDT at Praia Grande and Sao Paulo could be released (5–21%) by sulphuric acid treatment. The released residue had the composition: 69–90% DDT, 7–32% DDD and 0–3% DDE. Incubation of soil bound ¹⁴C‐residues with fresh inoculum for 3 months did not result in release of ¹⁴C.

Dissipation from wooden surfaces was fairly slow. After 20 weeks, 74% of the applied radioactivity could be recovered; 44% hexane‐non‐extractable.     

Chemical and biological release of 14C‐bound residues from soil treated with 14C‐p,p'‐DDT

Abstract

¹⁴C‐p,p'‐DDT‐bound residues in soil can be released by treatment with concentrated sulphuric acid at ambient temperatures. Within 6 days, about 70% of the bound residues was released. Bound residues released after 9 months incubation with ¹⁴C‐DDT showed the presence of DDT and DDE only while bound residues released after 18 months, contained in addition 13% DDD.

Release of bound ¹⁴C‐residues also occurs readily following inoculation of the soil‐bound residues with fresh soil or with individual microorganisms. Almost complete release of bound residues was observed after incubation for 45 days. The rate of release was rapid during the first two weeks and decreased thereafter. TLC and HPLC analysis showed that the released residues contained DDE (about 80%) and a smaller amount of DDD. The disappearance of DDT from the released residues may be attributed to its microbiological degradation to DDE and DDD, shortly after its release.     

Dioxin- and POP-contaminated sites—contemporary and future relevance and challenges

BACKGROUND, AIM AND SCOPE: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation. MAIN FEATURES: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites. RESULTS: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised. DISCUSSION: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals. CONCLUSIONS: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future. RECOMMENDATIONS AND PERSPECTIVES: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.     

A new synthesis of tetrachlorofluorodibenzo‐p‐dioxin

Abstract

The 1,2,3,4‐tetrachloro‐7‐fluorodibenzo‐p‐dioxin has been synthesized via condensation of 4‐fluorocatechol and pentachloronitrobenzene. This compound could be used as an internal standard for the analysis of 2,3,7,8‐tetrachlorodibenzo‐p‐dioxin by Chromatographic methods.     

Particle and substrate losses from Teflon® and quartz filters

Teflon® and quartz particulate matter samples were collected at two special study sites. In order to estimate changes in mass corresponding to the various filter handling operations (for TSP and PM₁₀ samples), changes in both controlled and shipped filter weights were monitored at predetermined stages of the filter handling process. The study data indicate that folding the quartz filters did not significantly change the filter mass even if the filter broke along the seam. A weight loss was noted following shipment of the TSP quartz filters but not the corresponding PM₁₀ quartz filters. Volatilization losses were also noted with the high volume samples collected at one city. Based on mass determinations, the quartz filters did not appear to be affected by passive artifact formation. No significant weight change occurred in the routine handling of the study dichotomous Teflon® filters. The results indicate that quartz and Teflon® filter media can be used in future particulate monitoring programs.     

Magnetic photocatalysts from δ-FeOOH and TiO2 and application in reactions for degradation of methylene blue and paracetamol with UV-C and sunlight

Environmental Science and Pollution Research - Water contamination is a common problem, especially considering dyes and drugs disposal. A possible and effective treatment method to remove these...     

Carbon Monoxide and Sulfur Dioxide Adsorption on— and Desorption from Glass,Plastic, and Metal Tubings

It was planned to install 305 m (1000 ft) of tubing on a television tower to transport ambient air samples from different height levels to pollutant monitoring instruments at ground level. A feasibility study was undertaken to determine the sorption characteristics of sulfur dioxide and carbon monoxide on various conduit materials. Sorption studies were completed on 30.5 m (100 ft) lengths of 1.3 cm (Y2 in) diam tubings of glass, Teflon, tygon, polypropylene, PVC piping, aluminum, and stainless steel. Final tests were completed on 305 m of 1.9 cm (3/4 in) diam stainless steel tubing. The following variables were investigated: tubing diameter, gas concentration, flowrate through the tubing, temperature, humidity, and the effect of sorption with sulfur dioxide and carbon monoxide alone or together. The parameter ranges studied approximated either atmospheric or air sampling conditions. For carbon monoxide, there was no significant difference between the mean inlet and outlet tubing concentrations under the conditions of the study. With sulfur dioxide, there was neither tubing adsorption nor desorption under the experimental parameters studied, except for tygon, PVC, and aluminum. After a conditioning period with sulfur dioxide, tygon, PVC, and aluminum could also be used as air inlet conduits; tygon is not recommended.     

Selected chloro and bromo derivatives of triclosan—syntheses and their occurrence in Canadian sewage and biosolid samples

The occurrence of triclosan (TCS), a general purpose antibacterial agent contained in numerous consumer and personal-care products, in the aquatic environment is well known. To a lesser degree, the formation of chlorinated and brominated derivatives of TCS during the chlorination of the antibacterial has also been reported. Presumably due to the lack of authentic standards, very few reports have been published on the levels of these halogenated TCSs in the environment. For this purpose, we have synthesized six selected halogenated derivatives of TCS, namely, 3-Cl-, 5-Cl-, 3,5-Cl₂-, 3-Br-, 5-Br-, and 3,5-Br₂- TCSs, with supporting ¹H-NMR (nuclear magnetic resonance) and GC–MS (gas chromatography–mass spectrometry) data for their structural assignments. Using these model compounds together with sensitive analytical methods, we were able to identify and quantify the above compounds together with their precursor compound TCS in Canadian municipal wastewater and biosolid samples for the first time. While detected in all influent (range from 1.4 to 24.1 ng L^?1) and biosolid (range from 7.7 to 274 ng g^?1) samples, the concentrations of these chlorinated TCS were generally from 100- to 1,000-fold lower than TCS in the same sample. Even lower levels (<20 ng/g in 85 % of the results) of brominated TCS were found in biosolids, and they were mostly undetected in sewage.     

Polyfluoroalkyl phosphate esters and perfluoroalkyl carboxylic acids in target food samples and packaging—method development and screening

Polyfluoroalkyl phosphate mono-, di-, and tri-esters (mono-, di-, and triPAPs) are used to water- and grease-proof food packaging materials, and these chemicals are known precursors to perfluoroalkyl carboxylic acids (PFCAs). Existing analytical methods for PAPs lack sample clean-up steps in the sample preparation. In the present study, a method based on ultra performance liquid chromatography coupled to tandem mass spectrometry (UPLC/MS/MS) was developed and optimized for the analysis of mono-, di-, and triPAPs, including a clean-up step for the raw extracts. The method was applied to food samples and their PAP-containing packaging materials. The optimized UPLC/MS/MS method enabled the separation and identification of a total of 4 monoPAPs, 16 diPAPs, and 7 triPAPs in the technical mixture Zonyl®-RP. For sample clean-up, weak anion exchange solid phase extraction columns were tested. PAPs standard solutions spiked onto the columns were separated into a fraction containing neutral compounds (triPAPs) and a fraction with ionic compounds (mono- and diPAPs) with recoveries between 72–110 %. Method limits of quantification for food samples were in the sub to low picogram per gram range. For quantitative analysis of PAPs, compound-specific labeled internal standards showed to be essential as sorption and matrix effects were observed. Mono-, di-, and/or triPAPs were detected in all food packaging materials obtained from the Swedish market. Up to nine diPAPs were detected in the food samples, with the 6:2/6:2 and 6:2/8:2 diPAPs as the dominant compounds. DiPAP concentrations in the food samples ranged from 0.9 to 36 pg/g, which was comparable to individual PFCA concentrations in the same samples. Consumption of food packed in PAP-containing materials could be an indirect source of human exposure to PFCAs.     

Greenlandic water and sanitation systems—identifying system constellation and challenges

A good water supply and wastewater management is essential for a local sustainable community development. This is emphasized in the new global goals of the UN Sustainable Development, where the sixth objective is to: “Ensure availability and sustainable management of water and sanitation for all” (United Nations 2015). This obviously raises the question of how this can be achieved considering the very different conditions and cultures around the globe. This article presents the Greenlandic context and elucidates the current Greenland water supply system and wastewater management system from a socio-technical approach, focusing on the geographic, climatic and cultural challenges. The article identifies a diverse set of system constellations in different parts of Greenland and concludes with a discussion of health and quality of life implications.     

Rapid photodegradation and detection of zolpidem over β-SnWO4 and α-SnWO4 nanoparticles: optimization and mechanism

Environmental Science and Pollution Research - We reported the tin (II) tungstate nanoparticles as the photocatalyst and sensor modifier that were synthesized via chemical precipitation reaction...     

Evaluation of chlordimeform and degradation products for mutagenic and DNA‐damaging activity in salmonella typhimurium and escherichia coli

Abstract

The mutagenic activity of chlordimeform and two of its breakdown products, 4‐chloro‐o‐toludine and 4‐chloro‐N‐formyl‐o‐toluidine were determined with five histidine dependent strains of Salmonella typhimurium (TA1535, TA1537, TA1538, TA98, TA100) and five tryptophan dependent strains of E. coli WP₂. (WP₂, WP₂uvrA, WP67, CM611, CM571) with and without rat liver microsomal enzymes. 4‐chloro‐o‐toluidine increased the number of the reversions of the S. typhimurium strain TA1535 more than two fold over spontaneous at the concentration of 400 μg/plate.

The results of the DNA repair tests in the Salmonella TA1538/TA1978 and E. coli multirepair deficient systems showed that both breakdown products were active in inducing damage not repaired in at least one repair deficient strain while chlordimeform itself was inactive.     

Hydroxypropyl-β-cyclodextrin extractability and bioavailability of phenanthrene in humin and humic acid fractions from different soils and sediments

Organic matter (OM) plays a vital role in controlling polycyclic aromatic hydrocarbon (PAH) bioavailability in soils and sediments. In this study, both a hydroxypropyl-β-cyclodextrin (HPCD) extraction test and a biodegradation test were performed to evaluate the bioavailability of phenanthrene in seven different bulk soil/sediment samples and two OM components (humin fractions and humic acid (HA) fractions) separated from these soils/sediments. Results showed that both the extent of HPCD-extractable phenanthrene and the extent of biodegradable phenanthrene in humin fraction were lower than those in the respective HA fraction and source soil/sediment, demonstrating the limited bioavailability of phenanthrene in the humin fraction. For the source soils/sediments and the humin fractions, significant inverse relationships were observed between the sorption capacities for phenanthrene and the amounts of HPCD-extractable or biodegradable phenanthrene (p?<?0.05), suggesting the importance of the sorption capacity in affecting desorption and biodegradation of phenanthrene. Strong linear relationships were observed between the amount of HPCD-extractable phenanthrene and the amount degraded in both the bulk soils/sediments and the humin fractions, with both slopes close to 1. On the other hand, in the case of phenanthrene contained in HA, a poor relationship was observed between the amount of phenanthrene extracted by HPCD and the amount degraded, with the former being much less than the latter. The results revealed the importance of humin fraction in affecting the bioavailability of phenanthrene in the bulk soils/sediments, which would deepen our understanding of the organic matter fractions in affecting desorption and biodegradation of organic pollutants and provide theoretical support for remediation and risk assessment of contaminated soils and sediments.     

Raman and SERS spectra of thiamethoxam and the Ag3–thiamethoxam complex: an experimental and theoretical investigation

Dutch water boards have a well-established program for monitoring pesticide contamination of surface waters. These monitoring data have been processed into a graphic format accessible online and designed to provide insight into pesticide presence in Dutch surface waters and trends over time: the Pesticides Atlas (http://www.pesticidesatlas.nl). With this tool one can easily get maps of where a pesticide is being measured and where it might possibly constitute an environmental problem over the years. Presently, results of the periods 1997/1998 until 2005/2006 are available at the level of individual active ingredients. At a national level, the percentage of pesticides concentrations that exceed the maximum tolerable risk has declined 30% to 38% over the years 2003/2004 compared with 1997/1998. This means that surface water quality in the Netherlands has improved with respect to pesticides, however there are still many locations at which the measured concentrations exceed the environmental quality standards. The results on linking land use to pesticides concentrations were shown to assist in optimization of monitoring programs. By developing the present Internet tool, many new opportunities for environmental risk assessment and risk management were identified, e.g. optimization of monitoring strategies and communication to policymakers.     

Plan and Schedule for NAPAP’s 1989 and 1990 Assessment Reports

On the following pages is an excerpt from the Overview and Summary (Part 1) of the recently published 300-page National Acid Precipitation Assessment Program (NAPAP) document* that describes the planned activities of the Program for the next two years. This document has been made available for public review and an open meeting was held on November 17 in Washington, D.C. to receive comments on it. The Plan will be revised following consideration of these comments and published in January 1989.