A detailed evaluation of the individual health benefits arising in a domestic property following radon remediation--a case-study in Northamptonshire, U.K

Radon gas occurs naturally in the environment with variable distribution, concentrating sufficiently in the built environment in some areas to pose a public health risk. Radon levels can be successfully reduced in affected buildings, and large-scale remediation programmes have been justified in terms of accrued costs and benefits. We present results from a house where radon levels in the main living-room and master bedroom were monitored on an hourly basis over extended periods before and after radon remediation by sub-slab depressurisation. These results were combined with results from a recent occupancy survey to estimate the health impact on occupants spending varying times in the home. Prior to remediation, mean hourly radon exposure is moderately linearly correlated (R(2)=0.66-0.78) with time spent in the house. Following remediation, correlation is significantly enhanced (R(2)=0.91-0.95), but the exposure reduction of an occupant following remediation is less than that predicted using the NRPB protocol.     

An approach to comparative assessments of potential health risks from exposure to radionuclides and hazardous chemicals

The need to compare potential health risks to the public associated with different activities that can result in releases of hazardous substances to the environment is becoming increasingly important in decision-making. In making such comparisons, it is desirable to use equivalent indicators of potential health risks for radionuclides, chemical carcinogens, and noncarcinogenic hazardous chemicals. Current approaches to risk assessment that were developed for purposes of protecting human health do not provide equivalent indicators of potential risks from exposure to radionuclides and hazardous chemicals. Comparisons of environmental concentrations or calculated exposures or risks with standards for protection of public health also do not provide equivalent indicators of potential risks. We propose a simple approach to comparative risk assessments in which calculated exposures to any hazardous substances are expressed relative to no-observed-effect levels (NOELs) or, preferably, lower confidence limits of benchmark doses (BMDLs) in humans. This approach provides an equivalent, science-based indicator of the relative risks posed by different exposures to any hazardous substances.     

Undisclosed chemicals — implications for risk assessment: A case study from the mining industry

Many of the chemicals used in industry can be hazardous to human health and the environment, and some formulations can have undisclosed ingredients and hazards, increasing the uncertainty of the risks posed by their use. The need for a better understanding of the extent of undisclosed information in chemicals arose from collecting data on the hazards and exposures of chemicals used in typical mining operations (copper, platinum and coal). Four main categories of undisclosed chemicals were defined (incomplete disclosure; chemicals with unspecific identities; relative quantities of ingredients not stated; and trade secret ingredients) by reviewing material safety data sheet (MSDS) omissions in previous studies. A significant number of chemicals (20% of 957 different chemicals) across the three sites had a range of undisclosed information, with majority of the chemicals (39%) having unspecific identities. The majority of undisclosed information was found in commercially available motor oils followed by cleaning products and mechanical maintenance products, as opposed to reagents critical to the main mining processes. All three types of chemicals had trade secrets, unspecific chemical identities and incomplete disclosures. These types of undisclosed information pose a hindrance to a full understanding of the hazards, which is made worse when combined with additional MSDS omissions such as acute toxicity endpoints (LD₅₀) and/or acute aquatic toxicity endpoints (LC₅₀), as well as inadequate hazard classifications of ingredients. The communication of the hazard information in the MSDSs varied according to the chemical type, the manufacturer and the regulations governing the MSDSs. Undisclosed information can undermine occupational health protection, compromise the safety of workers in industry, hinder risk assessment procedures and cause uncertainty about future health. It comes down to the duty of care that industries have towards their employees. With a wide range of chemicals increasingly used, there is a balance that needs to be reached between disclosure requirements, trade secret provisions and definitions of hazardous ingredients for market needs, and the information required to protect the health of their workers.     

Integration of environmental and human health risk assessment for industries using hazardous materials: a quantitative multi criteria approach for environmental decision makers

Environmental management, for which environmental and human health risk assessment is the first stage, is a requirement for industries both before construction and during operation in order to sustain improved quality of life in the ecosystem. Therefore, the aim of this study is to propose an approach that integrates environmental and human health risk assessment for industries using hazardous materials in order to support environmental decision makers with quantitative and directive results. Analytic hierarchy process and fuzzy logic are used as tools to handle problems caused by complexity of environment and uncertain data. When the proposed approach is implemented to a scenario, it was concluded that it is possible to define risk sources with their risk classes and related membership degrees in that classes which enable the decision maker to decide which risk source has priority. In addition, they can easily point out and rank the factors contributing those risk sources owing to priority weights of them. As a result, environmental decision makers can use this approach while they are developing management alternatives for unfounded and on-going industrial plants using hazardous materials.     

A review of regulatory decisions for environmental protection: part I - challenges in the implementation of national soil policies

Since many soil studies have already revealed the possible risks to human health and the environment arising from contaminated soils it is therefore crucial to preserve soil quality under current and future conditions. In the last three decades a number of countries already introduced national policies and practices for the management of contaminated sites, and in 2002, an EU Thematic Strategy for Soil Protection was proposed by the European Commission. In this paper we review and analyse several national contaminated land policy regimes already in place in order to assess common elements and to identify specific needs in the development of national soil policies. We propose a framework that combines the D-P-S-I-R structure of policy evaluation with the Source-Pathway-Receptor approach to health risk assessment to support the development of effective country specific regulatory decisions for managing contaminated land in countries where these are yet to be implemented. The framework proposed allows decision makers to effectively use available information and to identify existing data gaps. As a result it is apparent that while there are technical aspects of site characterisation, risk assessment and remediation processes that could be commonly implemented at an EU level there are certain trans-scientific aspects that require political choices and need to be customized by EU Member States.     

Chemical contaminants in feedlot wastes: concentrations, effects and attenuation

Commercial feedlots for beef cattle finishing are potential sources of a range of trace chemicals which have human health or environmental significance. To ensure adequate protection of human and environmental health from exposure to these chemicals, the application of effective manure and effluent management practices is warranted. The Australian meat and livestock industry has adopted a proactive approach to the identification of best management practices. Accordingly, this review was undertaken to identify key chemical species that may require consideration in the development of guidelines for feedlot manure and effluent management practices in Australia. Important classes of trace chemicals identified include steroidal hormones, antibiotics, ectoparasiticides, mycotoxins, heavy metals and dioxins. These are described in terms of their likely sources, expected concentrations and public health or environmental significance based on international data and research. Androgenic hormones such as testosterone and trenbolone are significantly active in feedlot wastes, but they are poorly understood in terms of fate and environmental implications. The careful management of residues of antibiotics including virginiamycin, tylosin and oxytetracycline appears prudent in terms of minimising the risk of potential public health impacts from resistant strains of bacteria. Good management of ectoparasiticides including synthetic pyrethroids, macrocyclic lactones, fluazuron, and amitraz is important for the prevention of potential ecological implications, particularly towards dung beetles. Very few of these individual chemical contaminants have been thoroughly investigated in terms of concentrations, effects and attenuation in Australian feedlot wastes.     

A critical evaluation of the implications for risk based land management of the environmental chemistry of Sulphur Mustard

Sulphur Mustard, or "Mustard Gas" is in fact an oily liquid which was used as a chemical weapon primarily for its vesicant action which necessitates whole body protection. It is also now recognised as a carcinogenic agent upon chronic exposure. Soil contaminated with Sulphur Mustard continues to present both acute and chronic human health risks and risks to groundwater, surface water and the wider ecology at a number of sites globally and, in some cases, has done for many decades. This is at odds with the simple aqueous chemistry of the compound which would suggest that it should be short lived in the environment, especially in the presence of water. A number of studies have examined the possible factors for this longevity and, though the causes are generally assumed to be understood, the precise reasons have not yet been definitively determined and the evidence in support of the existing theories is at best circumstantial. At present, the prevailing view is that Sulphur Mustard is somehow protected by oligomeric or polymeric sulphonium species produced during incomplete hydrolysis reactions. The following review discusses the pertinent degradation mechanisms in the environment; hydrolysis and thermal degradation and the reasons put forward for the longevity of Sulphur Mustard in the literature. Other factors, such as the role of polymeric species in Sulphur Mustard droplets in modifying the mobility of the agent are also examined. Ultimately, without a thorough understanding of the abiotic fate of the Sulphur Mustard, uncertainties will remain in the application of risk assessment and remediation strategies to such sites, potentially compromising the validity or effectiveness of such actions.     

Analysis of the individual health benefits accruing from a domestic radon remediation programme

Although radon can be present within buildings at sufficient levels to pose a health risk, levels can be reduced relatively easily. Recent studies on a group of radon-remediated homes, based on assessment of collective population-average risk coefficients, have estimated the benefits and cost effectiveness accruing from remediation and have confirmed that domestic remediation in UK radon Affected Areas would result in significantly reduced cancer risks to the population in those areas. Although the population-average approach used hitherto has applied occupancy and lung-cancer risk factors, these are potentially misleading in assessing discrete populations. The study reported here uses the recently developed European Community Radon Software (ECRS) to quantify individual risks in a sample of householders who remediated their homes following indications that radon levels exceeded the action level. The study proceeds from population-averaged to 'individual risk' evaluation, successfully comparing individual and collective risk assessments, and demonstrates that those who remediate are not representative of the general population. Health benefits accruing from remediation are three times lower than expected, largely because remediators are older, live in smaller households, and smoke less than the population average, leading to the conclusion that the current strategy employed in the UK is failing to target those most at risk.     

Dioxins sources and current remediation technologies--a review

Dioxins are highly toxic and ubiquitous compounds that are unintentional by-products of several chemical processes on earth. According to the earth pollutant terminology, they are next to the nuclear catastrophes. It is because of their concerns over adverse health effects, a number of countries have introduced stringent emission standards. The present review focuses on entire sources of dioxins present in the environment. They are broadly classified into four major categories such as, incineration, combustion, industrial and reservoir sources. State-of-the-art remediation technologies available for reducing dioxins formation and emission from the important sources such as, flue gas, fly ash and soil were described in detail. Further, in order to get a comprehensive perception about the dioxins subject, topics such as, dioxins transfer in the environment, their mode of action, toxicity equivalence factor, exposure and health risk assessment were highlighted in brief in the introduction. A future prospects based on the findings of the review was discussed at the end.     

Cost-Effective Control of Ground-Level Ozone Pollution in and around Beijing

Ground level ozone pollution has become a significant air pollution problem in Beijing. Because of the complex way in which ozone is formed, it is difficult for policy makers to identify optimal control options on a cost-effective basis. This paper identi-fies and assesses a range of options for addressing this problem. We apply the Ambient Least Cost Model and compare the eco-nomic costs of control options, then recommend the most effective sequence to realize pollution control at the lowest cost. The study finds that installing of Stage II gasoline vapor recovery system at Beijing’s 1446 gasoline stations would be the most cost-effective option. Overall, options to reduce ozone pollution by cutting ve-hicular emissions are much more cost-effective than options to "clean up" coal-fired power plants.     

Measurement and modelling of radioxenon plumes in the Ottawa Valley

Since 2001 a real-time radiation monitoring network of Canadian nuclear facilities and major population centres has been implemented for response to nuclear incidents including a possible terrorist attack. Unshielded NaI(Tl) spectroscopic detectors are employed to measure gamma radiation from airborne radioactivity and radioactivity deposited on the ground. These detectors are composed of a standard 3'x3' cylindrical NaI(Tl) spectrometers with data storage and integrated telemetry. Some of the detectors have been deployed in the Ottawa Valley near Chalk River Laboratories and Ottawa, which has a complex radioxenon environment due to the proximity of nuclear power reactors, and medical isotope facilities. Although not a health threat, these releases have provided an opportunity for the Canadian Meteorological Centre and the Commissariat à l'Energie Atomique to validate their meteorological models. The meteorological models of the two organizations are in good agreement on the origin and the source terms of these releases.     

Cost-Effective Control of Ground-Level Ozone Pollution in and around Beijing

Abstract

Ground level ozone pollution has become a significant air pollution problem in Beijing. Because of the complex way in which ozone is formed, it is difficult for policy makers to identify optimal control options on a cost-effective basis. This paper identifies and assesses a range of options for addressing this problem. We apply the Ambient Least Cost Model and compare the economic costs of control options, then recommend the most effective sequence to realize pollution control at the lowest cost. The study finds that installing of Stage II gasoline vapor recovery system at Beijing’s 1446 gasoline stations would be the most cost-effective option. Overall, options to reduce ozone pollution by cutting vehicular emissions are much more cost-effective than options to “clean up” coal-fired power plants.     

A spatial risk assessment methodology to support the remediation of contaminated land

When soil and groundwater contaminations occur over large areas, remediation measures should be spatially prioritized on the basis of the risk posed to human health and in compliance with technological and budget constraints. Within this scope, the application of human health risk assessment algorithms in a spatially resolved environment raises a number of methodological and technical complexities. In this paper, a methodology is proposed and applied in a case study to support the entire formulation process of remediation plans, encompassing hazard assessment, exposure assessment, risk characterisation, uncertainty assessment and allocation of risk reduction measures. In the hazard assessment, it supports the selection of Contaminants of Concern (CoC) with regard to both their average concentrations and peak concentrations, i.e. hot spots. In the exposure assessment, it provides a zoning of the site based on the geostatistical mapping of contaminant. In the risk characterisation, it generates vector maps of Risk Factors on the basis of the risk posed by multiple substances and allows the interrogation of most relevant CoC and exposure pathways for each zone of the site. It also supports the Monte Carlo based probabilistic estimation of the Risk Factors and generates maps of the associated uncertainty. In the risk reduction phase, it supports the formulation of remediation plans based on the stepwise spatial allocation of remediation interventions and the on-time simulation of risk reduction performances. The application of this methodology is fully supported by an easy-to-use and customized Geographical Information System and does not require high expertise for interpretation. The proposed methodology is the core module of a Decision Support System (DSS) that was implemented in the DESYRE software aimed at supporting the risk-based remediation of megasites.     

Fuel particles in the Chernobyl cooling pond: current state and prediction for remediation options

During the coming years, a management and remediation strategy for the Chernobyl cooling pond (CP) will be implemented. Remediation options include a controlled reduction in surface water level of the cooling pond and stabilisation of exposed sediments. In terrestrial soils, fuel particles deposited during the Chernobyl accident have now almost completely disintegrated. However, in the CP sediments the majority of ⁹⁰Sr activity is still in the form of fuel particles. Due to the low dissolved oxygen concentration and high pH, dissolution of fuel particles in the CP sediments is significantly slower than in soils. After the planned cessation of water pumping from the Pripyat River to the Pond, significant areas of sediments will be drained and exposed to the air. This will significantly enhance the dissolution rate and, correspondingly, the mobility and bioavailability of radionuclides will increase with time. The rate of acidification of exposed bottom sediments was predicted on the basis of acidification of similar soils after liming. Using empirical equations relating the fuel particle dissolution rate to soil and sediment pH allowed prediction of fuel particle dissolution and ⁹⁰Sr mobilisation for different remediation scenarios. It is shown that in exposed sediments, fuel particles will be almost completely dissolved in 15–25 years, while in parts of the cooling pond which remain flooded, fuel particle dissolution will take about a century.     

Human health effects of residual carbon nanotubes and traditional water treatment chemicals in drinking water

The volume of industrial and domestic wastewater is increasing significantly year by year with the change in the lifestyle based on mass consumption and mass disposal brought about by the dramatic development of economies and industries. Therefore, effective advanced wastewater treatment is required because wastewater contains a variety of constituents such as particles, organic materials, and emulsion depending on the resource. However, residual chemicals that remain during the treatment of wastewaters form a variety of known and unknown by-products through reactions between the chemicals and some pollutants. Chronic exposure to these by-products or residual chemicals through the ingestion of drinking water, inhalation and dermal contact during regular indoor activities (e.g., showering, bathing, cooking) may pose cancer and non-cancer risks to human health. For example, residual aluminium salts in treated water may cause Alzheimer's disease (AD). As for carbon nanotubes (CNTs), despite their potential impacts on human health and the environment having been receiving more and more attention in the recent past, existing information on the toxicity of CNTs in drinking water is limited with many open questions. Furthermore, though general topics on the human health impacts of traditional water treatment chemicals have been studied, no comparative analysis has been done. Therefore, a qualitative comparison of the human health effects of both residual CNTs and traditional water treatment chemicals is given in this paper. In addition, it is also important to cover and compare the human health effects of CNTs to those of traditional water treatment chemicals together in one review because they are both used for water treatment and purification.     

Chemical contaminants in swimming pools: Occurrence,implications and control

A range of trace chemical contaminants have been reported to occur in swimming pools. Current disinfection practices and monitoring of swimming pool water quality are aimed at preventing the spread of microbial infections and diseases. However, disinfection by-products (DBPs) are formed when the disinfectants used react with organic and inorganic matter in the pool. Additional chemicals may be present in swimming pools originating from anthropogenic sources (bodily excretions, lotions, cosmetics, etc.) or from the source water used where trace chemicals may already be present. DBPs have been the most widely investigated trace chemical contaminants, including trihalomethanes (THMs), haloacetic acids (HAAs), halobenzoquinones (HBQs), haloacetonitriles (HANs), halonitromethanes (HNMs), N-nitrosamines, nitrite, nitrates and chloramines. The presence and concentrations of these chemical contaminants are dependent upon several factors including the types of pools, types of disinfectants used, disinfectant dosages, bather loads, temperature and pH of swimming pool waters. Chemical constituents of personal care products (PCPs) such as parabens and ultraviolet (UV) filters from sunscreens have also been reported. By-products from reactions of these chemicals with disinfectants and UV irradiation have been reported and some may be more toxic than their parent compounds. There is evidence to suggest that exposure to some of these chemicals may lead to health risks. This paper provides a detailed review of various chemical contaminants reported in swimming pools. The concentrations of chemicals present in swimming pools may also provide an alternative indicator to swimming pool water quality, providing insights to contamination sources. Alternative treatment methods such as activated carbon filtration and advanced oxidation processes may be beneficial in improving swimming pool water quality.     

关于我国21世纪农业清洁生产的思考

现代工业的出现和工业化进程的不断发展,使生态环境受到污染和破坏。清洁生产因突破了传统的终端污染控制的被动局面,在工业领域得到推广应用。然而,以高度集约化和大量化学物质投入为重要特征的现代农业,所导致的环境污染问题也日益严峻。因此,为达到农业生产与生态环境协调发展的目的,农业清洁生产应成为２１世纪农业发展模式和农业环保策略,其关键是开发绿色农用品,改进农业生产技术。     

Impact of climate change on the domestic indoor environment and associated health risks in the UK

There is growing evidence that projected climate change has the potential to significantly affect public health. In the UK, much of this impact is likely to arise by amplifying existing risks related to heat exposure, flooding, and chemical and biological contamination in buildings. Identifying the health effects of climate change on the indoor environment, and risks and opportunities related to climate change adaptation and mitigation, can help protect public health.We explored a range of health risks in the domestic indoor environment related to climate change, as well as the potential health benefits and unintended harmful effects of climate change mitigation and adaptation policies in the UK housing sector. We reviewed relevant scientific literature, focusing on housing-related health effects in the UK likely to arise through either direct or indirect mechanisms of climate change or mitigation and adaptation measures in the built environment. We considered the following categories of effect: (i) indoor temperatures, (ii) indoor air quality, (iii) indoor allergens and infections, and (iv) flood damage and water contamination.Climate change may exacerbate health risks and inequalities across these categories and in a variety of ways, if adequate adaptation measures are not taken. Certain changes to the indoor environment can affect indoor air quality or promote the growth and propagation of pathogenic organisms. Measures aimed at reducing greenhouse gas emissions have the potential for ancillary public health benefits including reductions in health burdens related heat and cold, indoor exposure to air pollution derived from outdoor sources, and mould growth. However, increasing airtightness of dwellings in pursuit of energy efficiency could also have negative effects by increasing concentrations of pollutants (such as PM_2.5, CO and radon) derived from indoor or ground sources, and biological contamination. These effects can largely be ameliorated by mechanical ventilation with heat recovery (MVHR) and air filtration, where such solution is feasible and when the system is properly installed, operated and maintained. Groups at high risk of these adverse health effects include the elderly (especially those living on their own), individuals with pre-existing illnesses, people living in overcrowded accommodation, and the socioeconomically deprived.A better understanding of how current and emerging building infrastructure design, construction, and materials may affect health in the context of climate change and mitigation and adaptation measures is needed in the UK and other high income countries. Long-term, energy efficient building design interventions, ensuring adequate ventilation, need to be promoted.     

Resourceful Utilization of Tannery Wastewater

Leather industry is an important light industry in China.Leather making requires a series of chemical treatment.Degreasing,unhairing and chrome tanning wastewaters are the main portions of tannery wastewater.Reclaiming and reusing these wastewaters can eliminate 80% of COD,75% of BOD,95% of chromium and 93% of sulfuret,furthermore reduce environment impact,decrease treatment costs,save chemicals and water.Some application methods of wastewater reclamation and reuse for different operations were reported.The suitable reclamation and reuse technologies can enable leather making processes more rational,and realize the recovery and recycle of several chemicals in the tannery.Resourceful utilization of tannery wastewater should mate with renovating production technology,updating equipment,and must be guaranteed sufficiently by environmental protection measures.