Enhanced biodegradation of azo dyes using an integrated elemental iron-activated sludge system: I. Evaluation of system performance.

The objective of this research is to evaluate an integrated system coupling zero-valent iron (Fe(0)) and aerobic biological oxidation for the treatment of azo dye wastewater. Zero-valent (elemental) iron can reduce the azo bond, cleaving dye molecules into products that are more amenable to aerobic biological treatment processes. Azo dye reduction products, including aniline and sulfanilic acid, were shown to be readily biodegradable at concentrations up to approximately 25 mg/L. Batch reduction and biodegradation data support the proposed integrated iron pretreatment and activated sludge process for the degradation of the azo dyes orange G and orange I. The integrated system was able to decolorize dye solutions and yield effluents with lower total organic carbon concentrations than control systems without iron pretreatment. The success of the bench-scale integrated system suggests that iron pretreatment may be a feasible approach to treat azo dye containing wastewaters.     

Biosorption and biodegradation of Acid Orange 7 by Enterococcus faecalis strain ZL: optimization by response surface methodological approach

Reactive dyes account for one of the major sources of dye wastes in textile effluent. In this study, decolorization of the monoazo dye, Acid Orange 7 (AO7) by the Enterococcus faecalis strain ZL that isolated from a palm oil mill effluent treatment plant has been investigated. Decolorization efficiency of azo dye is greatly affected by the types of nutrients and the size of inoculum used. In this work, one-factor-at-a-time (method and response surface methodology (RSM) was applied to optimize these operational factors and also to study the combined interaction between them. Analysis of AO7 decolorization was done using Fourier transform infrared (FTIR) spectroscopy, desorption study, UV–Vis spectral analysis, field emission scanning electron microscopy (FESEM), and high performance liquid chromatography (HPLC). The optimum condition via RSM for the color removal of AO7 was found to be as follows: yeast extract, 0.1 %?w/v, glycerol concentration of 0.1 %?v/v, and inoculum density of 2.5 %?v/v at initial dye concentration of 100 mg/L at 37 °C. Decolorization efficiency of 98 % was achieved in only 5 h. The kinetic of AO7 decolorization was found to be first order with respect to dye concentration with a k value of 0.87/h. FTIR, desorption study, UV–Vis spectral analysis, FESEM, and HPLC findings indicated that the decolorization of AO7 was mainly due to the biosorption as well as biodegradation of the bacterial cells. In addition, HPLC analyses also showed the formation of sulfanilic acid as a possible degradation product of AO7 under facultative anaerobic condition. This study explored the ability of E. faecalis strain ZL in decolorizing AO7 by biosorption as well as biodegradation process.     

NaNO(2)/FeCl(3) catalyzed wet oxidation of the azo dye Acid Orange 7

A combination of ferric chloride and sodium nitrite significantly improved the wet oxidation of the azo dye Acid Orange 7 (AO7) in acid aqueous media (pH 2.6) under moderate conditions (T=150 degrees C; oxygen pressure=0.5 MPa). To evaluate the catalytic system, wet oxidation of AO7 was carried out at temperatures between 90 and 150 degrees C and oxygen pressures ranging from 0.1 to 0.5 MPa. The effect of initial solution pH from 2.6 to 11.4 and the amount of catalyst on the degradation of AO7 were also investigated. AO7 initial concentration was kept 200 mg L(-1). The degradation process was monitored by UV-visible spectroscopy, HPLC, IC (ion chromatography), GC-MS and TOC analysis. At 150 degrees C and 0.5 MPa oxygen pressure, 56% TOC was removed after 4h of treatment, while no obvious TOC removal were achieved without catalyst at the same experimental condition. The main degradation products were some small organic acids: formic acid, acetic acid, pyruvic acid, oxalic acid, succinic acid (identified and quantified by IC) and phthalic acid (identified by GC-MS).     

Two stage biological treatment of a diazo reactive textile dye and the fate of the dye metabolites

A two stage anaerobic/aerobic bacterial process was used to decolorize and partially mineralize a reactive vinyl sulfone diazo dye C.I. Reactive Black 5 (RB5) in a synthetic wastewater. Since the anchor group of reactive dyes reacts during the dyeing process, the effect the degree of hydrolysis of the vinyl sulfone dye had on decolorization, mineralization and toxicity in each stage was investigated. An overall color removal of approximately 65% was found for both the fully and partially hydrolyzed dye. Partial mineralization of the fully hydrolyzed RB5 was achieved in the two stage rotating disc reactors. While the anchor group metabolite p-aminobenzene-2-hydroxyethylsulfonic acid (p-ABHES) was mineralized, an oxidized form of the center metabolite (1,2-ketimino-7-amino-8-hydroxynaphthalene-3,6-disulfonic acid) remained in the aerobic stage effluent, causing the effluent to be colored although no RB5 was present. Partially hydrolyzed dye in the influent with vinyl forms of the anchor group caused cessation of biogas production and a reduction in decolorization efficiency in the anaerobic stage. No evidence for mineralization of the partially hydrolyzed dye or its metabolites was found. A method for evaluating dye mineralization using lumped parameters is presented.     

Fate and transformation of naphthylaminesulfonic azo dye Reactive Black 5 during wastewater treatment process

Certain aromatic amines generated by the decolorization of some azo dyes are not removed substantially by conventional anaerobic–aerobic biotreatment. These aromatic amines are potentially toxic and often released in the wastewater of industrial plants. In this study, the fate and transformation of the naphthylaminesulfonic azo dye Reactive Black 5 (RB5) during different phases of a sequencing batch reactor were investigated. The major products of RB5 decolorization during the anaerobic phase include 2-[(4-aminophenyl)sulfonyl]ethyl hydrogen sulfate (APSEHS) and 1-2-7-triamino-8-hydroxy-3-6-naphthalinedisulfate (TAHNDS). During the aerobic phase, APSEHS was hydrolyzed and produced 4-aminobenzenesulfonic acid, which was further degraded via dearomatization. TAHNDS was transformed rapidly via auto-oxidation into TAHNDS_DP-1 and TAHNDS_DP-2, which were not further removed by the activated sludge during the entire 30-day aerobic phase. In contrast, different behaviors of TAHNDS were observed during the anoxic phase. The transformation of TAHNDS was initiated either by deamination or desulfonation reaction. TAHNDS was then converted into 3,5-diamino-4-hydroxynaphthalene-2-sulfonic acid, which was subsequently removed via ring cleavage reaction under aerobic condition. In conclusion, complete degradation of TAHNDS by activated sludge occurs only during anoxic/aerobic processes instead of the conventional anaerobic/aerobic processes.     

含氮芳香化合物的厌氧生物降解研究回顾

回顾了硝基芳香化合物和偶氮化合物在厌氧条件下的生物脱毒、转化和矿化作用的研究成果。这些研究表明 ,由于硝基和偶氮基具有强烈的吸电子性 ,好氧条件下很难降解。但是 ,硝基和偶氮基芳香化合物在产甲烷菌群作用下较易还原脱毒 ,转化为相应的芳香胺类 ,其毒性要小几个数量级 ,因而有些毒性很高的芳香化合物废水可利用厌氧反应器处理 ,而且反应过程中发现一些芳香胺类化合物可被完全矿化 ,表明一些含氮芳香化合物可作为厌氧菌的碳源和能源 ,在厌氧条件下被完全生物降解。     

Degradability of selected azo dye metabolites in activated sludge systems

The stability of eight environmentally relevant azo dye metabolites [o-aminotoluene (2), 4,4'-thiodianiline (4), 4,4'-diaminodiphenylmethane (6), p-chloroaniline (7), 2,4-toluylenediamine (9), p-kresidine (14), 2,4-diaminoanisole (15), and 2-naphthylamine (18)] was investigated in activated sludge systems and compared to their hydrolysis stability. For both studies, test systems of the EC and EPA were used. The results show that degradation under aerobic conditions proceeds via oxidation of the substituents located on the aromatic ring or on the side chain. Under anaerobic conditions, the azo bond is reductively cleaved, which leads to the substituted amines. These are toxic and potentially hazardous to the environment.     

Photocatalytic degradation of azo dyes by nitrogen-doped TiO2 nanocatalysts

This study examined the photocatalytic degradation of three azo dyes, acid orange 7 (AO7), procion red MX-5B (MX-5B) and reactive black 5 (RB5) using a new type of nitrogen-doped TiO2 nanocrystals. These newly developed doped titania nanocatalysts demonstrated high reactivity under visible light (lambda>390 nm), allowing more efficient usage of solar light. The doped titania were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Experiments were conducted to compare the photocatalytic activities of nitrogen-doped TiO2 nanocatalysts and commercially available Degussa P25 powder using both UV illumination and solar light. It is shown that nitrogen-doped TiO2 after calcination had the highest photocatalytic activity among all three catalysts tested, with 95% of AO7 decolorized in 1 h under UV illumination. The doped TiO2 also exhibited substantial photocatalytic activity under direct sunlight irradiation, with 70% of the dye color removed in 1h and complete decolorization within 3 h. Degussa P25 did not cause detectable dye decolorization under identical experimental conditions using solar light. The decrease of total organic carbon (TOC) and evolution of inorganic sulfate (SO4(2-)) ions in dye solutions were measured to monitor the dye mineralization process.     

Application of zeolite-activated carbon macrocomposite for the adsorption of Acid Orange 7: isotherm, kinetic and thermodynamic studies

In this study, the adsorption behavior of azo dye Acid Orange 7 (AO7) from aqueous solution onto macrocomposite (MC) was investigated under various experimental conditions. The adsorbent, MC, which consists of a mixture of zeolite and activated carbon, was found to be effective in removing AO7. The MC were characterized by scanning electron microscopy (SEM), energy dispersive X-ray, point of zero charge, and Brunauer–Emmett–Teller surface area analysis. A series of experiments were performed via batch adsorption technique to examine the effect of the process variables, namely, contact time, initial dye concentration, and solution pH. The dye equilibrium adsorption was investigated, and the equilibrium data were fitted to Langmuir, Freundlich, and Tempkin isotherm models. The Langmuir isotherm model fits the equilibrium data better than the Freundlich isotherm model. For the kinetic study, pseudo-first-order, pseudo-second-order, and intraparticle diffusion model were used to fit the experimental data. The adsorption kinetic was found to be well described by the pseudo-second-order model. Thermodynamic analysis indicated that the adsorption process is a spontaneous and endothermic process. The SEM, Fourier transform infrared spectroscopy, ultraviolet–visible spectral and high performance liquid chromatography analysis were carried out before and after the adsorption process. For the phytotoxicity test, treated AO7 was found to be less toxic. Thus, the study indicated that MC has good potential use as an adsorbent for the removal of azo dye from aqueous solution.     

Electrochemical incineration of high concentration azo dye wastewater on the in situ activated platinum electrode with sustained microwave radiation

In this study, an in situ microwave activated platinum electrode was developed for the first time to completely incinerate the azo dye simulated wastewater containing methyl orange. The experiments were carried out in a circulating system under atmospheric pressure. Azo bond of methyl orange was partly broken on Pt, certain decoloration was reached, and the total organic carbon was not removed effectively without microwave activation. However, methyl orange was mineralized completely and efficiently on the in situ microwave activated Pt. 2,5-Dinitrophenol, p-nitrophenol, hydroquinone, benzoquinone, maleic and oxalic acids are the main intermediates during degradation of methyl orange. Aromatic products are the main substances leading to the poisoning of Pt and decrease of electrochemical oxidation efficiency, so methyl orange removal can not be carried out thoroughly. However, the intermediates were broke down quickly with in situ microwave activation promoting the mineralization of methyl orange on Pt.     

活性污泥缺氧转化1-2-7-三氨基-8-羟基-3-6-萘二磺酸简

1-2-7-三氨基-8-羟基-3-6-萘二磺酸（TAHNDS）作为偶氮染料的脱色产物很难被常规的厌氧-好氧染料废水处理工艺所去除。研究了未经驯化的活性污泥对TAHNDS的缺氧转化效果。结果表明,只有在特定的缺氧条件下（ORP在-50~-150 mV之间）,TAHNDS才能被活性污泥所降解转化。当浓度在10~80 mg/L范围内,TAHNDS可在72 h内转化93%以上。加入100 mg/L的硝酸盐和0.64 mmol/L的氧化还原介体蒽醌-2-磺酸钠（AQS）可将40 mg/L的TAHNDS的转化时间从84 h缩短到36 h。光谱及HPLC-MS分析表明,TAHNDS在缺氧条件下主要是通过脱氨基和脱磺酸作用生成已知可好氧生物降解的3,5-二氨基-4-羟基萘-2-磺酸。因此,缺氧处理有望作为预处理工艺促进废水中TAHNDS的完全降解。     

活性污泥缺氧转化1-2-7-三氨基-8-羟基-3-6-萘二磺酸

1—2-7-三氨基-8-羟基-3—6-萘二磺酸（TAHNDS）作为偶氮染料的脱色产物很难被常规的厌氧-好氧染料废水处理工艺所去除。研究了未经驯化的活性污泥对TAHNDS的缺氧转化效果。结果表明,只有在特定的缺氧条件下（ORP在-50～-150mV之间）,TAHNDS才能被活性污泥所降解转化。当浓度在10—80mg／L范围内,TAHNDS可在72h内转化93％以上。加入100mg／L的硝酸盐和0．64mmol／L的氧化还原介体蒽醌-2-磺酸钠（AQS）可将40mg／L的TAHNDS的转化时间从84h缩短到36h。光谱及HPLC—MS分析表明,TAHNDS在缺氧条件下主要是通过脱氨基和脱磺酸作用生成已知可好氧生物降解的3,5-二氨基4-羟基萘-2-磺酸。因此,缺氧处理有望作为预处理工艺促进废水中TAHNDS的完全降解。     

Citrobacter sp. CK3对活性红KN-3B的脱色反应动力学研究

采用脱色菌Citrobacter sp. CK3,以活性红KN-3B染料为处理对象,在厌氧批式反应条件下,系统考察了pH值,温度和染料浓度对脱色反应速度的影响;通过动力学模拟及反应过程中染料的UV-Vis扫描图分析,探讨了脱色反应机理。结果表明：Citrobacter sp. CK3对活性红KN-3B的脱色反应的适宜pH为7～9;脱色反应速度在温度为32℃时达到最大。染料初浓度从57 mg/L逐渐增大到458 mg/L时脱色率逐渐降低。脱色过程中染料的偶氮键发生断裂,脱色反应符合二级反应动力学。     

Kinetic modeling on photooxidative degradation of C.I. Acid Orange 7 in a tubular continuous-flow photoreactor

The decolorization of C.I. Acid Orange 7 (AO7), an anionic monoazo dye of acid class, was investigated using UV radiation in the presence of H2O2 in a tubular continuous-flow photoreactor as a function of oxidant and dye concentrations, reactor length and volumetric flow rate. The removal efficiency of AO7 depends on the operational parameters and increases as the initial concentration of H2O2 is increased but it decreases when the flow rate and initial concentration of AO7 are increased. The decolorization rate follows pseudo-first order kinetic with respect to the dye concentration. A rate equation for decolorization of AO7 was achieved by kinetic modeling. This model allows predicting concentration of AO7 in different photoreactor lengths for different volumetric flow rates and initial concentrations of H2O2 and AO7. The calculated results obtained from kinetic model were in good agreement with experimental data.     

A batch kinetic study on decolorization and inhibition of Reactive Black 5 and Direct Brown 2 in an anaerobic mixed culture

Decolorization and inhibition kinetic characteristics of two azo dyes namely Reactive Black 5 (RB 5) and Direct Brown 2 (DB 2) were investigated with partially granulated anaerobic mixed culture using glucose (3000 mg l(-1) COD) as carbon source and electron donor during batch incubation. Monod, zero-, first-, and second-order reaction kinetic models were tested in order to determine the most suitable rate model of substrate and color removal kinetic. The course of the decolorization and substrate removal process approximates to first-order kinetic model under batch conditions. Decolorization, and substrate removal were achieved effectively under test conditions but ultimate removal of azo dyes and substrate were not observed at high dye concentrations. Aromatic amine and volatile fatty acid accumulation were observed proportionally at a higher azo dye concentration. A competitive kinetic model that describes the anaerobic co-metabolism of increasing RB 5 and DB 2 dye concentrations with glucose as co-substrate has been developed based on the experimental data.     

Decolorization and biodegradation of dye wastewaters by a facultative-aerobic process

BACKGROUND: Dye wastewater is one of the main pollution sources of water bodies in China. Conventional biological processes are relatively ineffective for color removal, the development of alternative treatment methods will become important. Our subjective was that of introducing a new biotreatment technology which combined a facultative biofilm reactor (FBR) with an aerobic reactor (AR) to treat a dye wastewater. The efficiencies of color and chemical oxygen demand (COD) removal and the mechanism of dye degradation were investigated. METHODS: The anthraquinone acid dye (acid blue BRLL) concentration, organic loading rate (OLR) and hydraulic retention time (HRT) were varied in the experiments to evaluate the treatment efficiency and process stability. The biodegradation products were detected by infrared (IR) and high performance liquid chromatography and mass spectrometry (HPLC-MS). RESULTS AND DISCUSSION: The results demonstrated that the facultative biofilm process was more effective for decolorization than the anaerobic stage of an anaerobic-aerobic process. Most color removal occurred in the facultative reaction (maximum to 88.5%) and the BOD (biochemical oxygen demand): COD of the FBR effluent increased by 82.2%, thus improving the biodegradability of dyes for further aerobic treatment. The dye concentration, OLR and HRT will be the factors affecting decolorization. Color removal efficiency falls as the influent dye concentration increases, but rises with increased HRT. The infrared and HPLC-MS analyses of the effluents of FBR and AR reveal that the dye parent compound was degraded in each reactor during the process. CONCLUSION: The Facultative-aerobic (F-A) system can effectively remove both color and COD from the dye wastewater. The FBR played an essential role in the process. The average overall color and COD in the system were removed by more than 93.9% and 97.1%, respectively, at an OLR of 1.1 kg COD m(-3) d(-1) and at the HRT of 18-20 hours in the FBR and 4-5 hours in the AR. The color removal mechanism in each reactor was not only a sort of biosorption on the floc materials, but even more an effect of biodegradation, especially in the facultative process. Recommendation and Outlook. In applying the F-A system to treat a dye wastewater, the control of facultative processes and the set up of appropriate operation conditions appear to be critical factors. Also, it is suggested a moderate COD loading rate and about a 24-hour HRT will favor the F-A system.     

Isolation and characterization of 1,2,4-trichlorobenzene mineralizing Bordetella sp. and its bioremediation potential in soil

A soil which has been polluted with chlorinated benzenes for more than 25 years was used for isolation of adapted microorganisms able to mineralize 1,2,4-trichlorobenzene (1,2,4-TCB). A microbial community was enriched from this soil and acclimated in liquid culture under aerobic conditions using 1,2,4-TCB as a sole available carbon source. From this community, two strains were isolated and identified by comparative sequence analysis of their 16S-rRNA coding genes as members of the genus Bordetella with Bordetella sp. QJ2-5 as the highest homological strain and with Bordetella petrii as the closest related described species. The 16S-rDNA of the two isolated strains showed a similarity of 100%. These strains were able to mineralize 1,2,4-TCB within two weeks to approximately 50% in liquid culture experiments. One of these strains was reinoculated to an agricultural soil with low native 1,2,4-TCB degradation capacity to investigate its bioremediation potential. The reinoculated strain kept its biodegradation capability: (14)C-labeled 1,2,4-TCB applied to this inoculated soil was mineralized to about 40% within one month of incubation. This indicates a possible application of the isolated Bordetella sp. for bioremediation of 1,2,4-TCB contaminated sites.     

Visual determination of nitrite and nitrate in waters by color band formation method

A spot test for aqueous nitrate and nitrite for controlling nitrogen removal performance in small-scale wastewater treatment facilities is proposed. In this method, NO(2)(-) ion in water samples was allowed to react with sulfanilic acid and 1-naphthol to form an anionic azo dye. The resulting colored solution was introduced onto a mini column (similar to a gas detecting tube) packed with PVC particles coated with benzyl cetyl dimethyl ammonium chloride (BCDMA) and biphenyl. The NO(2)(-)-N concentration was determined visually by measuring the color band length (CBL) in the column. The CBL correlates linearly with nitrite concentration in the 4-20 mg-N l(-1) range. The concentration of nitrite+nitrate was determined after reduction to nitrite with zinc. The concentration of NO(3)(-)-N species was calculated by difference. This method was used to visually determine the concentrations of NO(2)(-)-N and (NO(2)(-)+NO(3)(-))-N in domestic wastewater samples with maximum suspended solid (SS) and chemical oxygen demand (COD) concentrations of 114 mg l(-1) and 73.9 mg l(-1), respectively.     

Biological solubilization and mineralization as novel approach for the pretreatment of food waste

The performance of a garbage disposal system to solubilize and mineralize food wastes through biological solubilization was evaluated through the examination of the effects of operational conditions like water supply volume, water supply frequency and aeration on the amount of waste solubilized, mineralized and accumulated in the reactor. The biological solubilization process consisted of a solubilization reactor and a circulation tank. Food waste and fresh water were supplied into the solubilization reactor with support media. Wastewater from the solubilization reactor was discharged to the circulation tank and water in the circulation tank was periodically pumped back to the solubilization reactor. In case of the total food waste loading of 16 kg m(3-1) d(-1), little carbon (0-5.7%) accumulated in the reactor as long as the system was kept under aerobic condition through large volume of water supply (higher than 3.5 lh(-1)) or applying aeration in the circulation tank. However, 42% of the loaded carbon accumulated under anaerobic condition in low water supply (less than 1.8 lh(-1)). The rest of the waste was either solubilized or mineralized. The aeration in the circulation tank, therefore, was effective to provide similar solubilization and mineralization as the large volume of water supply. However, frequency of feeding at the large volume of water supply had no significant effect on the amount of waste solubilization and mineralization.     

染料废水生物降解的产物分析

介绍了含酸性蒽醌蓝324染料废水在兼氧-好氧系统中的生物转化.产物分析结果表明:80.5%的母体染料大分子能在兼氧条件下降解成较为简单的中间产物,并且这些中间产物能在好氧条件下进一步矿化.对各反应器中主要的代谢产物分别进行紫外-可见、红外(FT-IR)和高效液相色-质联谱仪(HPLC-MS)检测分析后发现,母体染料经兼氧水解首先生成1-氨基-2-羟基蒽醌以及还原态的-OH基取代蒽醌隐色体,进一步水解生成3,4-二羟基苯甲酸.再经好氧处理,降解终产物中检测到了质荷比为101、102的脂肪类碳氢化合物、胺及醇等物质,未见有共轭结构存在.