中国皮革行业六价铬排放特征分析与监管建议

在分析皮革鞣制工艺现状基础上,根据2000—2013年环境统计数据、2010—2013年国控源监督性监测数据,以及典型制革园区不同类型皮革企业的现场监测数据,分析了中国皮革行业六价铬产生与排放特征,有针对性地提出了皮革行业六价铬的监管建议。     

Cr(VI)-DBAV-TritonX-100析相光度法测定微量铬(VI)的研究

研究了Ｃｒ（ＶＩ）ＤＢＡＶＴｒｉｔｏｎＸ１００析相显色体系,建立测定微量铬（ＶＩ）的析相光度法。在ｐＨ４５的乙酸—乙酸钠介质中,Ｃｒ（ＶＩ）、ＤＢＡＶ、ＴｒｉｔｏｎＸ１００加热形成配合物,于９５℃恒温水浴中加热析相１ｈ,即被ＴｒｉｔｏｎＸ１００相完全富集,最大吸收峰为５５６ｎｍ,铬（ＶＩ）含量在０～４μｇ／５ｍｌ服从比耳定律,采用７３２阳离子交换树脂分离干扰离子,测定水样中微量铬（ＶＩ）,结果满意。     

Effects of clay minerals on Cr(VI) reduction by organic compounds

The objective of this study is to examine the effect of clayminerals (illite, montmorillonite, and kaolinite) on chromate (Cr(VI)) reduction by several low molecular weightorganic compounds. Batch experiments at pH ranging from 3.0 to6.0 and 25 °C showed that 2:1 layered clays illite andsmectite catalyzed Cr(VI) reduction by oxalate. The catalyticeffect increased as pH was decreased. The 1:1 clay kaolinite hadno catalytic effect under comparable conditions. Direct Cr(VI)reduction by reactive moieties associated with illite andmontmorillonite was observed, but at a much slower rate than thecatalytic pathway. Cr(VI) reduction by glyoxylic acid, glycolicacid, lactic acid, and mandelic acid was accelerated by illite,although aqueous phase reduction might occur in parallel. Theseresults suggest that Cr(VI) reduction rates in subsurfaceenvironments rich in organic compounds may be elevated throughcatalysis of surface-bound metals and/or soluble species from theclay minerals, and as a result, higher than those expected fromaqueous phase reaction alone. Such rate enhancement for Cr(VI)reduction needs to be accounted for when developing new remedialtechniques for chromium site remediation or assessing its naturalattenuation.     

Effect of air-drying and oven-drying treatment on Cr(VI) content and Cr bond forms in soil

Air-drying and oven-drying are pretreatment processes often used before testing and analyzing various soil characteristics in the laboratory. This study selected three kinds of soil, including red soil, entisol, and alluvial soil, and examined the variation of the Cr(VI) content and Cr bond forms in these soils during air-drying and oven-drying. The results show that when the soil is air-dried in natural environment, the Cr(VI) content decreases with air-drying time. On day 10 of air-drying, the Cr(VI) content in these soils is 22.8～47.9 % of the initial value. When the soil is oven-dried, the Cr(VI) concentration decays faster; on day 8, the Cr(VI) is no longer detected in these soil samples. When the Cr(VI)-contaminated soil is treated by air-drying and oven-drying, the Cr bond form converts into a more stable form. After oven-drying, the Cr mainly exists in Fe–Mn oxide form, organic bond form, and residual form. The air-drying and oven-drying pretreatment processes of soil reduce the Cr(VI) content and stabilize the Cr bond form. If the laboratory analytic results are applied to risk analysis or remediation strategy planning for chromium-contaminated soil, the toxicity, bioavailability, and mobility of Cr in soil may be underrated.     

Speciative determination of Cr (III) and Cr (VI) in dyeing waste water of Dil Creek discharge to Izmit Gulf (Izmit-Kocaeli, Turkey) by ICP-AES

Wastewater pollution in industrial areas is one of the most important environmental problems. Heavy metal pollution, especially chromium pollution in wastewater sources from dyeing and tannery has affected the life on earth. This pollution can affect all ecosystems and human health directly or by food chain. Therefore, the determination of chromium in this study is of great importance. Dil Creek is located in the eastern Marmara region and discharges into the Izmit Gulf. This water source is used for irrigation in agriculture and as drinking water for animals. In this study, a rapid, sensitive and selective method for the speciative direct determination of Cr (III) and Cr (VI) in dyeing waste water samples collected from the nearest station to Izmit Gulf of Dil Creek in May 2006 by inductively coupled plasma-atomic emission spectrometry (ICP-AES) has been developed. An analysis of a given sample is completed in about 15 min for ICP-AES the method. As the result of the chromium analysis, the limit of quantification (LOQ) for the Cr (III), Cr (VI) and total Cr were founded as 0.0111 ± 0.0002 mg/l (RSD, 1.80%), 0.0592 ± 0.0010 mg/l (RSD, 1.70%) and 0.0703 ± 0.0020 mg/l (RSD, 2.84%) respectively. In addition, the general mathematical formula has been developed to calculate the concentration of Cr(III), which can be applied to any other metal species. The result of Cr (VI) analysis indicated that water quality of Creek was IV. class quality according to the inland water classification. In order to validate the applied method, recovery studies were performed.     

二苯碳酰二肼分光光度法测定水中六价铬测量不确定度评定

根据测量不确定度评定与表示理论,采用二苯碳酰二肼分光光度法测定水中六价铬的测量不确定度,通过计算和评定,得出该法测定水中六价铬的测量结果为0.233mg/L时.取包含因子k=2(约95%置信概率),扩展不确定度U=0.007mg/L.该不确定度评价方法在实际工作中具有较强的实用价值.     

Preconcentration and speciation of Cr(III) and Cr(VI) in water and soil samples by spectrometric detection via use of nanosized alumina-coated magnetite solid phase

A novel nanomaterial has been developed for speciation of Cr(III) and Cr(VI) in water and soil samples. In this study, a new type of alumina-coated magnetite nanoparticles (Fe₃O₄/Al₂O₃ NPs) modified by the surfactant Triton X-114 has been successfully synthesized and used in magnetic mixed hemimicelles solid-phase extraction procedure. The procedure was based on the reaction of chromium(III) with 1-(2-pyridilazo)-2-naphtol as a ligand, yielding a complex, which was entrapped “in situ” in the surfactant hemimicelles. The concentration of chromium(III) was determined using flame atomic absorption spectrometry. After reduction of Cr(VI) to Cr(III) by ascorbic acid, the system was applied to the total chromium. Cr(VI) was then calculated as the difference between the total Cr and the Cr(III) content. This method can also be used for complicated matrices such as soil samples without any special pretreatment. Under the optimum conditions of parameters, the recoveries of Cr(III) by analyzing the spiked water and soil samples were between 98.6 and 100.8 % and between 96.5 and 100.7 %, respectively. Detection limits of Cr(III) were between 1.4 and 3.6 ng?mL^?1 for water samples and 5.6 ng?mg^?1 for soil samples.     

CTL-12型化学需氧量速测仪与标准法测定CODCr之比较

使用CTL—12型化学需氧量速测仪分析废水化学需氧量，简便、快速，且方法可行，完全能满足环境监测技术要求。     

零价纳米铁对青梗菜吸收土壤铬的抑制效果探讨

通过盆栽实验探讨不同铬污染水平农田土壤施加零价纳米铁对不同时期青梗菜吸收土壤铬的抑制效果。结果表明,零价纳米铁能够有效抑制青梗菜对铬的富集,且在施加铬铁质量比例为1∶20和1∶40时效果较好,与对照相比,青梗菜根、茎、叶铬含量最高减少量分别为66%、79%、78%。同一污染土壤,不同采集时期青梗菜体内铬含量无显著差异。青梗菜体内富集的铬含量与土壤总铬含量呈正相关,青梗菜对铬富集量呈现根部茎部叶部。     

Modeling Waste Incineration for Life-Cycle Inventory Analysis in Switzerland

This paper proposes a mathematical model for life-cycle inventory analysis (LCI) of waste incineration in Switzerland. In order to model conventional and new incineration technologies adequately, fundamental aspects of the different technologies relevant for the LCI are discussed. The environmental impact of these technologies strongly depends on the assessment of the long-term emissions of the solid incineration residues and is therefore related to value based decisions about the time horizon considered. The article illustrates that the choice of the landfill model has a significant influence on the results of life-cycle assessment of waste incineration.     

Effect of temperature on single and competitive adsorptions of Cu(II) and Zn(II) onto natural clays

This study conducted a combined adsorption-sequential extractionanalysis (CASA), by which five phases (i.e., exchangeable, carbonate, Mn-Oxide, organic, and Fe-Oxide phases) of adsorbed heavy metals were analyzed, to investigate temperature effects on single and competitive adsorptions of Zn(II) and Cu(II) ontonatural clays. In the case of single adsorption of Zn, the exchangeable phase adsorption decreased from 65 to 40%, but thecarbonate phase adsorption increased from 30 to 40%, with an increase in temperature from 15 to 55 °C. However, in itscompetitive adsorption with Cu, Zn was mostly present in the exchangeable phase (over 90%), and with an increase in temperature, the exchangeable phase adsorption decreased only 10%. In the case of Cu, over 50% among the total amount of adsorption was present in the carbonate phase in both cases ofsingle and competitive adsorptions. The carbonate phaseadsorption of Cu increased from 56 to 61% and from 60 to 66% in single and competitive adsorptions, respectively, with atemperature increase. These results show that in the case of Zn,the major mechanism of retention in natural clay soils might beexchangeable phase adsorption, especially in the case of competitive adsorption with Cu. However, in the case of Cu, the major mechanism might be carbonate phase adsorption, which is known to be a more immobile phase than exchangeable phase adsorption. It seems that the adsorption of Zn and Cu onto natural clays is an endothermic reaction, which represents thatthe adsorption equilibrium constants and capacities increase with a temperature increase, with the exception of exchangeablephase adsorption.     

CODCr测定中空白试验值的影响因素分析

对CODCr测定中空白试验值的影响因素进行了探讨,结果表明,实验中的硫酸质量对测定影响最大。     

Sampling and Analysis of Quaternary Ammonium Compounds (QACs) Traces in Indoor Atmosphere

Quaternary Ammonium Compounds (QACs) are widely found in disinfectants used in hospitals. Benzalkonium chloride (BAC) and didecyldimethylammonium chloride (DDAC) predominate in the disinfecting formulations. These compounds are strong irritants and can play a role in the induction of Occupational Asthma among the professionals of health and cleaning. In order to evaluate the potential health effect of these quaternary ammonium compounds to hospital employers, the development of an analytical method for their quantification in indoor air was developed. DDAC aerosols are trapped by adsorption on XAD-2 resin SKC tube. The air in hospital buildings was sampled using a constant debit Gillian pump at a flow of 1.0 l/min (+/-5%). Ion Chromatography (IC) was chosen for the analysis of DDAC especially for its high sensitivity and specificity. The Limit of Detection (LOD) by IC for DDAC is 0.56 mug/ml. Therefore the LOD of atmospheric DDAC is 28 microg/m(3) with an air volume of 100 l and a desorption volume of 5 ml. All DDAC air samples were lower than the LOD of the analytical method by IC. Under the standard conditions of use of the disinfecting solutions (Surfanios, Ampholysine Plus and Amphospray 41), the insignificant volatility of DDAC would not seem to be able to contaminate the indoor hospital atmosphere during the disinfection process. However, the DDAC can contaminate working atmospheres if it is put in suspension by aerosolisation.     

Factor analysis and linear regression model (LRM) of metal speciation and physico-chemical characters of groundwater samples

An approach is described for viewing the interrelationship between different variables and also tracing the sources of pollution of groundwater of north Chennai (India). The data set of 43 variables which include major ions, minor ions and trace metal speciation (Cu, Pb, Cd and Zn) collected during the pre-monsoon and post-monsoon seasons of the year 2000–2001, was subjected to R-mode factor analysis to comprehend the distribution pattern of the said variables. It was found that first factor measures salinity and hardness which explained 19.12% of the total variance (comprised of variables EC, TDS, Na⁺, K⁺, Ca²⁺, Mg²⁺, total hardness, Cl⁻ and SO₄ ²⁻) during pre-monsoon, while it was 25.08% during post-monsoon. The second and third factors were attributed to speciation of zinc and copper ions during both pre-monsoon and post-monsoon. Although there were two more factors, loaded with speciation parameters of lead and cadmium, the variance of them were less than 10%. From this study it is seen that sea water intrusion, municipal solid waste disposal are the identified sources of component of pollution. The importance of metal ions is taking a secondary role and the anthropogenic origin-industrial activity, is the reason in the evaluation of pollution status as they come in the second, third, fourth and fifth factors. As the trace metal speciation was grouped in separate factors, linear regression model (LRM) with correlation analysis was applied to check its validity for prediction of speciation and to apply LRM for rapid monitoring of water pollution.     

大气可吸入颗粒物(PM10)中矿物组分的X射线衍射研究

利用X射线衍射技术对北京2002春季和夏季的可吸入颗粒物进行了研究.结果表明,北京春季和夏季可吸入颗粒物的矿物组成明显不同,春季可吸入颗粒物中的矿物以硅铝酸盐为主,同时存在碳酸盐、硫酸盐、硫化物、铁的氧化物、粘土矿物以及难以鉴定的矿物;在夏季的样品中,矿物的种类有所减少,却有新的物种出现,如氯化氨、硫酸氨等.XRD定量分析显示,在沙尘天气时,可吸入颗粒物中石英和粘土矿物以及非晶质分别占到24.1%、28.5%和2 0%,斜长石和方解石分别占到10.4%和8.1%,其他矿物总共不到10%.矿物组分的确定对可吸入颗粒物来源的识别有一定的指导作用.     

How Probability Survey Data Can Help Integrate 305(b) and 303(d)Monitoring and Assessment of State Waters

Section 305(b) of the United States’ Clean Water Act (CWA) requires states to assess the overall quality of waters in the states, while Section 303(d) requires states to develop a list of the specific waters in their state not attaining water quality standards (a.k.at impaired waters). An integrated, efficient and cost-effective process is needed to acquire and assess the data needed to meet both these mandates. A subset of presentations at the 2002 Environmental Monitoring and Assessment Program (EMAP) Symposium provided information on how probability data, tools and methods could be used by states and other entities to aid in development of their overall assessment of condition and list of impaired waters. Discussion identified some of the technical and institutional problems that hinder the use of EMAP methods and data in the analysis to identify impaired waters as well as development needs to overcome these problems.     

典型新兴环境污染物的研究进展

概述了内分泌干扰物(EDCs)、药物及个人护理品(PPCPs)等典型新兴环境污染物的主要类型、环境浓度、分析方法、来源与归趋以及国内外研究进展。内分泌干扰物、药物及个人护理品在世界各地的污水处理厂出水中检出,表明了污水处理技术的不完善性,亟需研究并应用更全面的污水处理技术,以从源头上阻断新兴环境污染物对环境的污染。     

Influence of different digital terrain models (DTMs)on alpine permafrost modeling

The thawing of alpine permafrost due to changes in atmospheric conditions can have a severe impact, e.g., on the stability of rock walls. The energy balance model, PERMEBAL, was developed in order to simulate the changes and distribution of ground surface temperature (GST) in complex high-mountain topography. In such environments, the occurrence of permafrost depends greatly on the topography, and thus, the digital terrain model (DTM) is an important input of PERMEBAL. This study investigates the influence of the DTM on the modeling of the GST. For this purpose, PERMEBAL was run with six different DTMs. Five of the six DTMs are based on the same base data, but were generated using different interpolators. To ensure that only the topographic effect on the GST is calculated, the snow module was turned off and uniform conditions were assumed for the whole test area. The analyses showed that the majority of the deviations between the different model outputs related to a reference DTM had only small differences of up to 1 K, and only a few pixels deviated more than 1 K. However, we also observed that the use of different interpolators for the generation of a DTM can result in large deviations of the model output. These deviations were mainly found at topographically complex locations such as ridges and foot of slopes.     

丰水期沱江水系环境内分泌干扰物分布特征

采集丰水期沱江水系德阳至泸州水样,分析6种环境内分泌干扰物的含量和分布特征。主要检出双酚A、壬基酚,双酚A的平均浓度为3.93~198 ng/L,与国内外河流浓度相比处于中等水平;壬基酚平均浓度为5.23~150 ng/L,与国外河流水平相当,但低于目前已有报道的国内河流。沱江水系中双酚A、壬基酚的分布整体均呈现出北高南低,上游高于中游、下游,干流低于支流的特征。