Agro-potentiality of distillery effluent on soil and agronomical characteristics of Abelmoschus esculentus L. (okra)

The present study showed that irrigation of soil with different effluent concentrations (10, 25, 50, 75, and 100 %) of distillery effluent (DE) for 60 days resulted in significant (P?<?0.001) changes in moisture content; electrical conductivity (EC), pH, chlorides (Cl^?), total organic carbon (TOC), exchangeable sodium (Na⁺), available potassium (K⁺), calcium (Ca²⁺), magnesium (Mg²⁺), iron (Fe²⁺), total Kjeldahl nitrogen (TKN), available phosphorus (P), and sulfate (SO₄ ^2?) of soil. The non-significant (P?>?0.05) changes were observed for water-holding capacity and bulk density of the soil. Among various concentrations of DE irrigation, irrigation with 100 % effluent concentration increased moisture content, (24.85 %), EC (77.88 %), Cl^? (285.95 %), TOC (3,171.42 %), exchangeable Na⁺ (241.04 %), available K⁺ (52.49 %), Ca²⁺ (990.37 %), Mg²⁺ (1,751.72 %), TKN (1,417.00 %), available P (305.00 %), and SO₄ ^2? (75.32 %) in the soil and decreased pH (?20.22 %). The more stimulation in agronomical parameters such as shoot length, root length, number of leaves, flowers, pods, dry weight, fresh weight, chlorophyll content, leaf area index, and crop yield of A. esculentus were observed to be inversely proportional to the concentration of effluent water, with the best results being obtained at a dilution of 25 % of DE concentration.     

Ferti-irrigational impact of sugar mill effluent on agronomical characteristics of Phaseolus vulgaris (L.) in two seasons

Ferti-irrigation response of 5, 10, 25, 50, 75, and 100 % concentrations of the sugar mill effluent (SME) on French bean (Phaseolus vulgaris L., cv. Annapurna) in the rainy and summer seasons was investigated. The fertigant concentrations produced significant (P?+), potassium (K⁺), calcium (Ca²⁺), magnesium (Mg²⁺), total Kjeldahl nitrogen (TKN), phosphate (PO₄ ^3?), sulfate (SO₄ ^2?), ferrous (Fe²⁺), cadmium (Cd), chromium (Cr), copper (Cu), manganese (Mn), and zinc (Zn), in both seasons. The contents of Cr, Cu, Mn, and Zn except Cd were found to be below the maximum levels permitted for soils in India. The agronomic performance of P. vulgaris was gradually increased at lower concentrations, i.e., from 5 to 25 %, and decreased at higher concentrations, i.e., from 50 to 100 %, of the SME in both seasons when compared to controls. The accumulations of heavy metals were increased in the soil and P. vulgaris from 5 to 100 % concentrations of the SME in both seasons. The contents of Cu, Mn, and Zn except Cd and Cr were noted under the permissible limit of Food and Agriculture Organization (FAO)/World Health Organization (WHO) standards. Most contents of biochemical components like crude proteins, crude fiber, and total carbohydrates were found with 25 % concentration of the SME in both seasons. The contamination factor (Cf) of various metals was in the order of Cd > Cr > Zn > Mn > Cu for soil and Mn > Zn > Cu > Cr > Cd for P. vulgaris in both seasons after fertigation with SME. Therefore, the SME can be used to improve the soil fertility and yield of P. vulgaris after appropriate dilution.     

Irrigational impact of distillery effluent on Abelmoschus esculentus L. Okra with special reference to heavy metals

The present study was performed under natural environment to assess levels of different heavy metals in soil and Abelmoschus esculentus plants along with soil microbial population irrigated with five rates of distillery effluent (DE) viz. 10, 25, 50, 75 and 100 % concentration in comparison with control (Bore well water). Results revealed that among various concentrations of DE, irrigation with 100 % DE significantly (P < 0.001) increased Zn (+63.46 %), Cu (+292.37 %), Zn (+3763.63 %), Cd (+264.29 %), Ni (+48.39 %) and Cr (+815.74 %), while decreased total bacteria (?45.23 %), fungi (?17.77 %) and actinomycetes (?42.57 %) in the soil. Enrichment factor of various heavy metals for soil was in the order Ni > Cr > Cd > Zn > Cu, and for A. esculentus plants, it was in the order Ni > Cr > Cu > Cd > Zn after irrigation with distillery effluent. The enrichment factor value was found maximum for Ni in comparison to other metals at 100 % DE concentration as compared with BWW. However, the values of these metals were below the recommended permissible limit.     

Impact of distillery effluent application to land on soil microflora

A pot culture experiment was conducted to evaluate the effect of different treatments of distillery wastewater, i.e. raw, treated, diluted and raw distillery wastewater mixed with domestic waste stabilization pond effluent (1:1) on populations of bacteria, fungi, actinomycetes and nitrogen fixing bacteria. The results indicated that raw wastewater decreased the population of bacteria, fungi and actinomycetes. The growth rates of Rhizobium and Azotobacter were also reduced after raw wastewater application. The toxic effect of raw wastewater was minimized when it was mixed with stabilization pond effluent (1:1), this was demonstrated by an increase in the populations of all the microorganisms studied. When a groundnut plant was irrigated with raw distillery wastewater, no fruits were produced and there was also less nodulation. This study indicates that raw distillery wastewater is very toxic to the soil microorganisms which are important in the soil ecosystem.     

Effect of spatial variability of storm on the optimal placement of best management practices (BMPs)

It is significant to design best management practices (BMPs) and determine the proper BMPs placement for the purpose that can not only satisfy the water quantity and water quality standard, but also lower the total cost of BMPs. The spatial rainfall variability can have much effect on its relative runoff and non-point source pollution (NPSP). Meantime, the optimal design and placement of BMPs would be different as well. The objective of this study was to discuss the relationship between the spatial variability of rainfall and the optimal BMPs placements. Three synthetic rainfall storms with varied spatial distributions, including uniform rainfall, downstream rainfall and upstream rainfall, were designed. WinVAST model was applied to predict runoff and NPSP. Additionally, detention pond and swale were selected for being structural BMPs. Scatter search was applied to find the optimal BMPs placement. The results show that mostly the total cost of BMPs is higher in downstream rainfall than in upstream rainfall or uniform rainfall. Moreover, the cost of detention pond is much higher than swale. Thus, even though detention pond has larger efficiency for lowering peak flow and pollutant exports, it is not always the determined set in each subbasin.     

Optimization of pulp mill effluent treatment with catalytic adsorbent using orthogonal second-order (Box-Behnken) experimental design

Novel catalytic adsorbent (ruthenium on carbon) was employed for the treatment of pulp mill effluent in the presence of hydrogen peroxide. Mathematical model and optimization of the process regarding the most favorable COD (%), TOC (%) and color (%) removal rates was developed and performed with experimental design taking into account catalytic adsorption process kinetics. As the initial experimental design, 3(3-1) half-fractional factorial design (H-FFD) was accomplished at two levels to study the significance of the main effects, such as catalytic adsorbent (g l(-1)) and hydrogen peroxide (ppm) concentrations using the response surface methodology (RSM). Finally, a four factor-three coded level central composite design (CCD) with 28 runs was performed in order to fit a second-order polynomial model. Validation of the model was accomplished by different criteria including coefficient of determination and the corresponding analysis of variance. The achieved removal rates for TOC (up to 75%), COD (up to 73%) and color (up to 68%) were observed for the defined optimal conditions: 1g l(-1) of ruthenium on carbon, 7 ppm of hydrogen peroxide, pH = 4 and ambient temperature. The proposed method benefited significantly improved TOC, COD and color removal efficiency, regenerability and reusability of the catalytic adsorbent and unaltered initial pH of an effluent in comparison to traditional adsorption or oxidation processes.     

Reuse of municipal effluent with drip irrigation and evaluation the effect on soil properties in a semi-arid area

Irrigation with municipal effluent was evaluated during 25 months in Southern Iran from 2003 to 2005 in which 14 tree species were irrigated with effluent and borehole water at an annual supply rate of 3,940 and 5,395 m(3) ha(-1), respectively. To mitigate the environmental effects, a drip irrigation system was designed and the amount of applied water based on pan evaporation was measured by flow meters and soil properties were monitored. The statistical results showed that the applied effluent had no adverse effect on soil properties. The soil salinity was reduced from 8.2, 6.8 and 7.0 dSm(-1) to 1.07, 1.12 and 3.5 dSm(-1 )in the soil layers 0-30, 30-60 and 60-90 cm, respectively. The SAR decreased significantly, while soil pH increased by 0.8 and 0.6 units in the layers 0-30 and 30-60 cm. A total application of 9,335 m(3)ha(-1 )of effluent with a nitrogen and phosphorus concentration of 7.9 and 10.3 mg l(-1), added 73 and 101 kg ha(-1) of nitrogen and phosphorus to the soil. Organic carbon also increased significantly. Twenty-five months irrigation with effluent caused a slight increase in soil bulk density and a slight decrease in mean permeability. Because of an efficient filtration and high discharge rate of bubblers (drippers), no considerable sign of clogging was observed.     

The use of phytotoxicity tests (common duckweed,cabbage, and millet) for determining effluent toxicity

The objective of this study was to use higher plants for detecting effluent toxicity. Eight effluent samples were obtained from three industrial sources prior to their entry into a sewer system. The tests were the duckweed reproduction test, and root growth tests using cabbage and millet. The results of repeated phytotoxicity tests were reproducible. Of the three industrial sources, the effluent samples from a specialty chemical industry were the most toxic. For two samples from this source, the IC50 values (the concentrations which caused 50% inhibitory effect) for duckweed were less than 1.6% effluent concentration. The samples from an agricultural product utilization plant were the least toxic. For these samples, root growth tests failed to obtain IC50 values while the duckweed tests showed IC50 values of 91 and 43% effluent concentration. Among the three types of tests conducted, the duckweed reproduction test showed the greatest sensitivity to effluent toxicity, while root growth tests using cabbage and millet had mixed results. Duckweed is recommended as a part of a battery of tests for effluent toxicity.     

Investigating the impacts of treated effluent discharge on coastal water health (Visakhapatnam,SW coast of Bay of Bengal,India)

The present study investigated the impacts of treated effluent discharge on physicochemical and biological properties of coastal waters from three pharmaceuticals situated along the coast of Visakhapatnam (SW Bay of Bengal). Seawater samples were collected (during the months of December 2013, March 2014 and April 2014) from different sampling locations (Chippada (CHP), Tikkavanipalem (TKP) and Nakkapalli (NKP)) at 0- and 30-m depths within 2-km radius (0.5 km = inner, 1 km = middle and 2 km?=?outer sampling circles) from the marine outfall points. Physicochemical and biological parameters, which differed significantly within the stations, were likely to be influenced by strong seasonality rather than local discharge. Dissolved oxygen variability was tightly coupled with both physical and biological processes. Phytoplankton cell density and total chlorophyll (TChla) concentrations were significantly correlated with dissolved inorganic nutrient concentrations. CHP (December) represented a diatom bloom condition where the highest concentrations of diatom cells, total chlorophyll (TChla), dissolved oxygen coupled with lower zooplankton abundance and low nutrient levels were noticed. The centric diatom, Chaetoceros sp. (>?50%) dominated the phytoplankton community. TKP (March) represented a post-diatom bloom phase with the dominance of Pseudo-nitzschia seriata; zooplankton abundance and nutrient concentrations were minimum. Conversely, NKP (April) represented a warm well-stratified heterotrophic period with maximum zooplankton and minimum phytoplankton density. Dinoflagellate abundance increased at this station. Relatively higher water temperature, salinity, inorganic nutrients coupled with very low concentrations of dissolved oxygen, TChla and pH were observed at this station. Copepods dominated the zooplankton communities in all stations and showed their highest abundance in the innermost sampling circles. Treated effluent discharge did not seem to have any significant impact at these discharge points.     

The effect of atmospheric pollution on α-glycerophosphate dehydrogenase activity in the satin moth (Leucoma salicis (L.))

The purpose of this study was to investigate how various combinations of atmospheric pollutants may affect -GPDH activity in the satin moth. Enzyme activity was measured in crude larva and pupa as well as in hoogenates from the fat body and thoracic muscles of adults. The insects were divided into five groups and treated with dust (containing heavy metals) and gaseous pollutants (SO₂, NO_x) in different concentrations. Specific activity of -GPDH was the highest in thoracic muscles of adult satin moth and was significantly higher in males, regardless of their origin. Low concentration of SO₂ caused stimulation of enzyme activity but simultaneous action of SO₂, NO_x and heavy metal containing dust with accompanied acid precipitation caused inhibition of -GPDH activity, probably as the result of sulphite bounds with pyridine and flavin nucleotides.     

The effect of salinity,temperature and time on the accumulation and depuration of copper in ragworm,Hediste (Nereis) diversicolor (O.F. Muller)

Under a low temperature condition of 12°C, accumulation of copper by the ragworm, Hediste (Nereis) diversicolor, increased at low salinity of 7.6 but was reduced at intermediate and high salinities of 15.25 and 30.5, respectively. Copper contents of the worms at low salinity and temperature ranged from 68 to 185 µg/g. Under increasing temperature of 17 and 22°C, bioavailability of copper to the worms increased irrespective of salinity gradient. The copper contents of the worm ranged from 59 to 784 µg/g dry weight. ANOVA analysis of data showed that salinity did not significantly affect accumulation of copper by the worm. Temperature significantly affected accumulation. The interaction of salinity and temperature was significant and complex, and days of exposure did not influence accumulation. Depuration of copper by the worm was independent of salinity which ranged from 510 to 15.6 µg/g. Temperature significantly affected depuration. The interaction of salinity and temperature was significant. However, individual worms neither accumulated nor depurated at the same rate.     

Biosorption properties of Morus alba L. for Cd (II) ions removal from aqueous solutions

The abundantly available industrial waste product Morus alba L. pomace (MAP) is one of the cost-effective biosorbent for removal of metal ions from aqueous solutions. Hence, in the present study, we aimed to test the ability of MAP to remove Cd(II) ions through batch biosorption process. Firstly, MAP was characterized using several techniques, and then the influence of various experimental parameters such as initial pH of the aqueous solution, initial Cd(II) concentration, contact time, MAP concentration, and temperature were evaluated upon the biosorption process. It was found that the maximum uptake of Cd(II) ions occurred at initial pH 6.0 and optimum contact time was observed as 60 min. Cd(II) ions adsorption on MAP analyzed by the Langmuir and Freundlich isotherm models and the maximum monolayer biosorption capacity of MAP was found to be 21.69 mg?g^?1 by using the Langmuir isotherm model. The pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models were employed to describe the biosorption kinetics. In order to investigate the thermodynamic properties of the biosorption process, the changes in the Gibbs free energy (?G), enthalpy (?H), and entropy (?S) were also evaluated and it has been concluded that the process was feasible, spontaneous, and endothermic in the temperature range of 5–40 °C.     

Impact of intensive agricultural practices on drinking water quality in the EVROS Region (NE GREECE) by GIS analysis

Chemical fertilizers are used extensively in modern agriculture, in order to improve yield and productivity of agricultural products. However, nutrient leaching from agricultural soil into groundwater resources poses a major environmental and public health concern. The Evros region is one of the largest agricultural areas in Northern Greece, extending over 1.5 million acres of cultivated land. Many of its drinking water resources are of groundwater origin and lie within agricultural areas. In order to assess the impact of agricultural fertilizers on drinking water quality in this region, tap-water samples from 64 different locations were collected and analyzed for the presence of nitrates [Formula: see text], nitrites [Formula: see text], ammonium [Formula: see text], sulfate [Formula: see text] and phosphate [Formula: see text]. These chemicals were selected based on the information that ammonium nitrate, ammonium sulfate and inorganic phosphate were the primary fertilizers used in local crop production. [Formula: see text], [Formula: see text] and [Formula: see text] levels exceeding accepted values were recorded in 6.25, 4.70 and 9.38% of all sampling points, respectively. [Formula: see text] and [Formula: see text] concentrations, on the other hand, were inside the permitted range. The data generated were introduced into a geographic information system (GIS) program for computer analysis and projection maps representing afflicted areas were created. Our results indicate a profound geographic correlation in the surface distribution of primary contaminants in areas of intensified agricultural production. Thus, drinking water pollution in these areas can be attributed to excessive fertilizer use from agricultural sources.     

Trace Metal Levels in Mussels (Mytilus Galloprovincialis L. 1758) from Turkish Aegean Sea Coast

Bio-monitoring of some heavy metal levels (Cd, Pb, Zn, Cu) in whole edible soft parts of Mytilus galloprovincialis (L. 1758) was conducted in Turkish Aegean Sea coast during the period of September 2002–August 2003 seasonally. Moreover, some physico-chemical environmental parameters, also have been analysed in the same region. The values of some physico-chemical environmental parameters in coastal waters of Turkish Aegean Sea were changed between; 9.0–27.0 ^∘C for temperature, 31.93–40.45 psu for salinity, 7.35–8.48 for pH and 4.05–9.50 mg/l for dissolved oxygen. The levels of trace elements in whole edible soft parts including interstitial fluids of Mediterranean mussels M. galloprovincialis (L. 1758), sampled from 6 different regions of Turkish Aegean Sea coast have ranged between; 0.04–0.52 μg Cd/g wet weight, 0.49–1.72 μg Pb/g w.w., 0.95–1.85 Cu/g w.w., 16.11–37.15 μg Zn/g w.w. The highest values for all trace metals (Cd, Pb, Zn, Cu) were measured in inner part of Izmir Bay (station 3) and lowest in Sigacik and Gulluk Bay (station 5, 6). Generally heavy metal levels are lower than the results in soft mussel tissues reported from Mediterranean regions.     

Development of a multi-criteria index ranking system for urban runoff best management practices (BMPs) selection

Low impact development best management practices (LID-BMPs) are considered to be cost-effective measures for mitigating the water quantity and quality impact of urban runoff. Currently, there are many types of LID-BMPs, and each type has its own intrinsic technical and/or economical characteristics and limitations for implementation. The selection of the most appropriate BMP type(s) for a specific installation site is therefore a very important planning step. In the present study, a multi-criteria selection index system (MCIS) for LID-BMP planning was developed. The selection indexes include 12 first-level indices and 26 second-level indices which reflect the specific installation site characteristics pertaining to site suitability, runoff control performance, and economics of implementation. A mechanism for ranking the BMPs was devised. First, each individual second-level index was assigned a numeric value that was based on site characteristics and information on LID-BMPs. The quantified indices were normalized and then integrated to obtain the score for each of the first-level index. The final evaluation scores of each LID-BMP were then calculated based on the scores for the first-level indices. Finally, the appropriate BMP types for a specific installation site were determined according to the rank of the final evaluation scores. In order to facilitate the application of the MCIS BMP ranking system, the computational process has been coded into a software program, BMPSELEC. A case study demonstrating the MCIS methodology, using an LID-BMP implementation planning at a college campus in Foshan, Guangdong Province, is presented.     

Mass occurrence of the ctenophore Bolinopsis vitrea (L. Agassiz, 1860) in the nearshore southern Adriatic Sea (Kotor Bay, Montenegro)

The ctenophore Bolinopsis vitrea has been rarely observed in the Mediterranean Sea. A bloom of B. vitrea is here reported for the first time in the southern Adriatic Sea in the spring and summer of 2009, together with its effect on the plankton of Kotor Bay. Ctenophores were found below 5 m depth only. Results of the investigation indicate that mass occurrence of B. vitrea could have a great impact on the Kotor Bay ecosystem. Their predation on copepods would reduce grazing pressure on phytoplankton, favouring an uncommon bloom of the latter. It is evident that B. vitrea are capable of altering rapidly the composition and biomass of coastal plankton communities when present in large masses. This first evidence of such events for this species may indicate changes in the functioning of marine ecosystems of the southern Adriatic.     

Irrigation water quality and the benefits of implementing good agricultural practices during tomato (Lycopersicum esculentum) production

The implementation of good agricultural practices (GAP) from irrigation water to the tomato packaging process enhances the safety of fresh produce and its value throughout the food chain. The aim of the present study was to show that fresh produce farms that apply and enforce GAP could reduce the presence of Salmonella in finished produce. Samples were collected biweekly from six packing houses from the central region of Sinaloa, México, for the isolation of Salmonella spp by the ISO 6579:2002 method, and the isolated strains were serotyped and genotyped by the Kauffmman-White scheme and pulsed field gel electrophoresis (PFGE), respectively. Salmonella strains were detected in 13 (36.1 %) irrigation water samples, while only two tomato samples were positive (5.5 %). Eight different serotypes were identified in irrigation water, and Salmonella Oranienburg (34 %) was the most prevalent; however, only Salmonella Agona and Salmonella Weltevreden were present on tomatoes. Salmonella Oranienburg was the most widely dispersed and variable serotype, with 10 different PFGE profiles. Salmonella Weltevreden was isolated from both types of samples, albeit with distinct genetic profiles, implying that the sources of contamination differ. These results confirm the utility of implementing good agricultural practices to reduce Salmonella contamination in irrigation water and the packaging process.     

Persistence and effect of processing on reduction of fipronil and its metabolites in chilli pepper (Capsicum annum L.) fruits

A single laboratory UPLC-MS/MS method was developed and validated for the estimation of fipronil and its metabolites in fresh and dry chilli pepper fruits. Dissipation of fipronil on chilli fruits was studied following the application of fipronil (Jump 80 WG) at 40 and 80 g active ingredient (a.i.) ha^?1 in the fruiting stage of the crop. The initial deposits of total fipronil on fresh chilli fruits at single and double dose application were 0.69 and 1.43 μg g^?1, respectively, and were dissipated to below quantitation level at 27 days after application. The half-life of fipronil at single and double dose in fresh chilli pepper was 4.22 and 4.32 days and the waiting period was 25.9 and 30.6 days, respectively. Processing factor due to sun drying was calculated by measuring fipronil residues in dry chilli fruits, and it ranged from 2.96 to 3.50 during 0 to 21st day after application. Among the metabolites of fipronil, fipronil desulfenyl and fipronil sulfone had maximum residues in fresh and dried chilli, respectively, followed by fipronil sulfide. Dipping in solutions of tamarind, turmeric, vinegar and slaked lime and wet scrubbing could remove more than 90 % of fipronil residues in fruits.