Selection of MSW landfill site for Konya, Turkey using GIS and multi-criteria evaluation

Landfill is a common solution for the final disposal of municipal solid waste (MSW) in Turkey. Landfill siting is an extremely difficult task to accomplish because the site selection process depends on different factors and regulations. To ensure that an appropriate site is chosen, a systematic process should be developed and followed. Unsuccessful landfill siting is typically the result of strong public opposition. In this study, candidate sites for an appropriate landfill area in Cumra County of Konya City are determined by using the integration of geographic information systems (GIS) and multi-criteria evaluation (MCE). ArcGIS 9.0 software and its extensions were used as the GIS tool since it is able to perform suitability analysis using MCE analysis. To identify appropriate landfill areas in the Cumra district, eight input map layers including proximity to municipal and local wells and irrigational canals, distance from transportation routes and rails, distance from archaeological sites, distance from urban areas, land use/land cover, and land slope are used in constraint mapping. A final map was generated which identifies regions showing suitability for the location of the landfill site. According to the map, 6.8% of the study area is most suitable, 15.7% is suitable, 10.4% is moderately suitable, 25.8% is poorly suitable, and 41.3% is unsuitable. At the end of the analyses, three candidate sites are determined. The selection of the final MSW landfill site, however, requires further field research.     

Solid waste disposal site selection with GIS and AHP methodology: a case study in Senirkent�CUluborlu (Isparta) Basin, Turkey

The appropriate site selection for waste disposal is one of the major problems in waste management. Also, many environmental, economical, and political considerations must be adhered to. In this study, landfill site selection is performed using the Geographic Information System (GIS), the Analytical Hierarchy Process (AHP), and the remote sensing methods for the Senirkent?CUluborlu Basin. The basin is located in the E?irdir Lake catchment area, which is one of the most important fresh water in Turkey. So, waste management must be regulated in the basin. For this aim, ten different criteria (lithology, surface water, aquifer, groundwater depth, land use, lineaments, aspect, elevation, slope, and distance to roads) are examined in relation to landfill site selection. Each criterion was identified and weighted using AHP. Then, each criterion is mapped using the GIS technique, and a suitability map is prepared by overlay analyses. The results indicate that 96.3% of the area in the basin is unsuitable; 1.6%, moderately suitable; and 2.1%, most suitable. Finally, suitable regions in the basin are determined for solid waste landfill disposal and checked in the field. The selected and investigated regions are considered to be suitable for the landfill.     

Municipal solid waste generation in growing urban areas in Africa: current practices and relation to socioeconomic factors in Jimma, Ethiopia

As one of cities in the developing countries, a rapid population growth and industrial activities pose many environmental challenges for Jimma city, Ethiopia. One aspect of urban growth posing a threat on sustainable development is poor solid waste management, which results in environmental pollution. The purpose of this study is to evaluate the quantity, composition, sources of waste generated, their current disposal practices, and to recommend appropriate management technologies. The total waste generated daily in Jimma city was ca. 88,000 kg, and the average per capita generation rate was 0.55?±?0.17 kg/capita/day. Eighty-seven percent of the waste was produced by households and 13% by institutions, and a negligible fraction (0.1%) was generated by street sweepings. During the rainy season, 40% more waste was generated than in the dry season because of the increased availability of agricultural food product. Further analysis showed that biodegradable organic waste constitutes 54% by weight with an average moisture content of 60% that falls within the required limits for composting. The nonbiodegradable components constitute 46% of which 30% of it was nonrecyclable material. Only 25% of the community uses municipal containers for disposal at the selected landfill site. Fifty-one percent of the households disposed their waste in individually chosen spots, whereas 22% burned their waste. Finally 2% of households use private waste collectors. The socioeconomic analysis showed that higher family income and educational status is associated more with private or municipal waste collection and less with the application of backyard or open dumping. These insights into generated waste and management practice in Jimma city allow making suggestions for improved collection, treatment, and disposal methods. A primary conclusion is that the biodegradable waste is a major fraction having suitable properties for recycling. As such an economic benefit can be obtained from this waste while avoiding the need for disposal.     

Applying Fuzzy logic and the point count system to select landfill sites

The treatment of solid waste is currently one of the major environmental problems facing municipalities. Thousands of tonnes of waste are generated each day, requiring a large area for disposal purposes. It is difficult to find suitable areas for the construction of such sanitary landfills as numerous criteria must be met, and landfill sites vary considerably in terms of their sophistication. The selection criteria for landfill sites should be as simple as possible, and with this in mind, we have evaluated a large number of random cases for the suitability of the site for landfill purposes using the recently advocated fuzzy approach. Using the fuzzy classification, we have attempted to develop a simple classification which uses only certain point values for available attributes. A normalized average of such attributes based on the proposed classifier is further evaluated using additionally generated random data sets. The results appear to be encouraging and indicate that the present classifier can be used as a substitute for the fuzzy-based ranking of landfill sites.     

GIS ASSESSMENT OF THE VULNERABILITY OF THE ROSETTA AREA, EGYPT TO IMPACTS OF SEA RISE

A study of the area, including Rosetta city and the estuary of the river Nile (Rosetta branch), has been carried out for assessment of the impact of sea level rise (slr). A geographic information system (GIS) has been built including layers of land use, topography, archeological sites, land cover and population. Analysis of data has been carried out to assess vulnerability of various land use and land cover classes to the impact of sea level rise.Because the area under study has geomorphic relief profiles just over the sea level, inundation of total land could reach 26% of total study area due to only half a meter rise in sea level. This lost area includes 32% of urban clusters mainly used for human shelter and contains 52% of present monuments, 25% of valuable high quality dense palm trees cultivation, 75% of beaches and 19% of lands suitable, 25% of valuable high quality dense palm trees cultivation, 75% of beaches and 19% of lands suitable for agricultural reclamation (although suffering from salt water intrusion and soil salinization). This is expected to cause a significant impact on the present population, economic activities, total regional revenue, and also on tourism. At 1.1 m sea level rise, 72% to total study area could be inundated. This area contains all beaches, half of the palm cultivation, 43% of total urban clusters, which includes 81% of the monumental sites and historic buildings.Other environmental problems such as solid waste management, sanitary disposal network, deteriorating conditions of some monumental structures, in addition to the sea level rise act negatively on the environmental quality of the urban community. Future plans for urban expansion in the area must be studied carefully in order to preserve valuable palm lands and maintain and protect monuments and historic sites which help the promotion of tourism. An environmental management program is essential for upgrading tourism, promoting urban development and protecting coastal lands.     

四川省城市生活垃圾的组成及特性

对四川省典型城市生活垃圾的组成、元素分析及热值等实验结果进行分析,结果表明:典型城市生活垃圾具有厨余含量高(57.4%～66.1%)、渣土含量少(1.9%～11.7%)的特点;四川省城市生活垃圾热值介于4 200～5 500 kJ/kg之间,且大部分处在4 800～5 500 kJ/kg之间;攀枝花、绵阳和成都市金牛区城市生活垃圾热值较高,适合采用焚烧法,内江和遂宁的城市生活垃圾热值偏低,宜采用填埋的方法。     

Assessment of potential impacts of municipal solid waste treatment alternatives by using life cycle approach: a case study in Vietnam

In Vietnam, most of municipal solid waste (MSW) is disposed of at open dumping and landfill sites, and the methane gas from waste is the un-ignorable source of greenhouse gas (GHG) emission. It is indispensable to explore the possibility for GHG mitigation in MSW management. The objective of this study was to estimate alternative waste treatment practices towards the GHG emission mitigation, energy consumption and generation, reduction of landfill volume, and various benefits for proposing the appropriate selection by scenario analyses for representative Vietnam’s cities. Impacts were calculated by utilizing life cycle assessment (LCA) method. A literature review survey on the current applicability of LCA database for assessing impacts from waste sector in developing countries, especially for Vietnam, was carried out. This study assessed the contribution of alternative solid waste treatment practices. The result showed that, except investment and operation costs, incineration with energy recovery seems the suitable alternative for treating waste from representative cities of Vietnam according to reduction of GHG emission and waste burden to landfill sites and energy recovery and generation. Besides, MSW composition was identified as an important factor directly influencing to impacts as well as other products and benefits of waste treatment alternatives. Reliable data on waste composition are indispensable for assessing to choose, improve, or plan the waste treatment practices towards sustainable development.     

Multi-level screening of a proposed hazardous waste treatment and disposal facility site--a case study

A comprehensive environmental assessment (EA) is a pre-requisite before the site for developing a hazardous waste treatment and disposal facility (HWTDF) is selected. However, the resource limitations, especially for developing countries, often dictatethat the detailed EA be restricted to those sites, which are constraint free and have low hazard potentials. Thus, a preliminary screening exercise for assessing the suitability ofsite for developing the HWTDF needs to be carried out to avoid huge costs involved in detailed EA. While screening a HWTDF site,various factors such as present land use, ecologically sensitiveareas, geology and hydrogeology of the area, the quality and quantity of wastes, engineered safeguards, and the operationalprocedures that need to be adopted, are required to be addressed. In this paper, a multi-level screening criteria employing RemoteSensing, Constraint Mapping, Groundwater Pollution Potential Index (DRASTIC Index), and the Site Ranking was used to assess the suitability of a proposed site for the development of HWTDF.The study helped to identify various constraints at the proposedsite and their significance on the development of the HWTDF.     

Analysis of multi-temporal landsat satellite images for monitoring land surface temperature of municipal solid waste disposal sites

This studypresents a remote sensing application of using time series Landsat satellite images for monitoring the Trail Road and Nepean municipal solid waste (MSW) disposal sites in Ottawa, Ontario, Canada. Currently, the Trail Road landfill is in operation; however, during the 1960s and 1980s, the city relied heavily on the Nepean landfill. More than 400 Landsat satellite images were acquired from the US Geological Survey (USGS) data archive between 1984 and 2011. Atmospheric correction was conducted on the Landsat images in order to derive the landfill sites’ land surface temperature (LST). The findings unveil that the average LST of the landfill was always higher than the immediate surrounding vegetation and air temperature by 4 to 10 °C and 5 to 11.5 °C, respectively. During the summer, higher differences of LST between the landfill and its immediate surrounding vegetation were apparent, while minima were mostly found in fall. Furthermore, there was no significant temperature difference between the Nepean landfill (closed) and the Trail Road landfill (active) from 1984 to 2007. Nevertheless, the LST of the Trail Road landfill was much higher than the Nepean by 15 to 20 °C after 2007. This is mainly due to the construction and dumping activities (which were found to be active within the past few years) associated with the expansion of the Trail Road landfill. The study demonstrates that the use of the Landsat data archive can provide additional and viable information for the aid of MSW disposal site monitoring.     

Determination of nickel, copper, zinc and lead in human scalp hair in Syrian occupationally exposed workers by total reflection X-ray fluorescence

In this study, an attempt has been made to study methane flux and quantification of heavy metals from Municipal Solid Waste (MSW) landfill areas of selected cities in India. During the period of study, the average value of methane flux was estimated from these landfill areas varied from 146–454 mg/m2/h. Methane emission from landfill is of serious environmental global concern as it accounts for approximately 15 percentages of current Greenhouse gas emissions. It has been estimated that methane emission, from landfill areas in the world, in next two decades would be same as that what is emitted from paddy fields presently. Besides, the estimation of methane flux, quantification of some heavy metals was conducted to analyse the suitability of using MSW as compost. The average values for metals were observed to be both within the range of USEPA and Indian standards for MSW disposal in landfill areas and to be used as compost respectively.     

Municipal solid waste management in Thailand and disposal emission inventory

The increasing municipal solid waste (MSW) generation along with the high fraction of organic waste and a common disposal of open dumping is the current scenario in many areas in Thailand. As a response to this problem, the country’s Pollution Control Department (PCD) aims to reduce the MSW generation rate to less than 1 kg/capita/day, increase the collection efficiency, and improve the recovery of recyclables. For many years, more than 60% of the solid waste disposal system in Thailand has been carried out by open dumping. According to the survey conducted by this study, in 2004 there were 425 disposal sites (95 landfills; 330 open dumps) in Thailand and an estimated methane emission of 115.4 Gg/year was generated based on this practice. It has been estimated that the anticipated methane emission in Thailand will rise from 115.4 Gg/year to 118.5 Gg/year if the largest open dumpsites in provinces with no existing landfill are upgraded to sanitary landfill; and it will increase to 193.5 Gg/year if the existing sanitary landfill is upgraded to integrated waste management facilities. Moreover, Bangkok metropolitan have the highest methane emission (54.83 Gg/year) among all the regions in Thailand. The methane emission forecast of 339 Gg/year by 2020 (based on LandGEM methodology) provides a stimulus to create a comprehensive plan to capture and utilize methane as an energy source.     

Estimation of Land Use Specific Runoff and Pollutant Concentration for Tapi River Basin in India

Non-point source (NPS) pollution is the result of various land use practices such as agriculture, sites of construction and waste disposal, urban development and so on. The control of NPS pollution is possible by regular monitoring and assessment on watershed basis to educate people for implementing well-known structural and non-structural measures. Recent trend is to use GIS based modelling tool for assessment of rainfall-runoff and non-point loading. The approach requires generation and analysis of basin wide data on various features of land and estimates of Event Mean Concentrations (EMCs) of pollutants in the runoff. In the present paper, basin wide data in different districts of Tapi basin has been analysed for land use distribution; fertilizer application; low, medium and high-density habitation; and annual rainfall. Coefficients of runoff have been estimated considering pervious and impervious area for different land use types, and compared with the reported values for Indian conditions. The estimated mean annual runoff flow indicated that two districts Jalgaon and Dhule contribute maximum runoff to the Tapi River. Estimates of EMCs for BOD and nutrients (N and P) in the runoff from various districts are useful in GIS-based modelling study for NPS pollution assessment.     

The Challenge of Urban Growth and Sustainable Development for Asian Cities in the 21st Century

The challenges of urban growth for mega-cities in Asia, now and over the next few decades, are examined with particular reference to the ability or inability of those in charge of cities, elected officials and administrators, to provide for the legitimate demands of citizens. Issues such as population growth, industrialization, urbanization, financing, employment, health care, social services, public safety, transportation, water supply, waste disposal, and cultural and recreational facilities are included. While sustainable development of cities is advocated strongly by environmentalists and administrators, the past history of urban growth is quite often the opposite. Why? This paper examines the severe constraints that urban developments are subjected to, and might be possible to change in order to create a better future, with particular emphasis on Asia. Finally, the important contributions made by environmental scientists and engineers towards more sustainable development are placed in context with the reality of urban growth. The approach taken is my personal view, having lived for over a period of 62 years in Europe, North America and now Asia, and having practised as an engineer and educator for almost 40 years.     

Detection of metal contamination in wild asparagus near a waste disposal site

Estimating contaminant distributions in environmental media is necesary to evaluate human and ecological hazards. Because of uncertainties in release histories and transport, traditional sampling and statistical techniques applicable to the experimental sciences may not be suitable for exploratory studies at hazardous waste sites. An approach that relies on cluster analysis of principal components (PCA) was used to identify contaminated wild asparagus (Asparagus officinalis) growing in the vicinity of waste disposal sites along the Columbia River at the U.S. Department of Energy's Hanford Site in southeast Washington state. Metals in soil samples taken from the sites contained elevated levels of Ag, Al, Ba, Cd, Cr, Cu, Hg, Ni, Pb, Sb, Zn, and V. Samples of asparagus tissue were collected from the river near the waste site, from Hanford old fields abandoned 52 years ago, and from commercial fields in the neighboring communities. Dried tissues were analyzed for metals content by ICP-mass spectrometry, furnace AA, and cold vapor AA. Tissue concentrations of elements varied over 5 orders of magnitude, from K at 46 900 ppm to As and Ag at maximum concentrations below 1 ppm. PCA produced four components that accounted for 66.2% of the metals variance. Subsequent cluster analysis using Ward's minimum variance separated the data into Columbia River and old-field groups, with the River group further divided into three clusters: plants primarily upriver from the waste sites, plants primarily downriver, and plants growing in or near the waste sites. The clustering showed that the more soluble components of the discharges (Ba and Ca) showed a pattern of distribution in the asparagus plants consistent with the ground water flow pattern, in that these elements were found far downriver of the disposal sites themselves. In contrast, the less mobile elements Al, Cd, Cr, Fe, Mn, Tl, and Zn were elevated only near the most-recently used waste disposal area. Asparagus from agricultural fields, including fields abandoned 50 years ago, contained higher concentrations of Fe, Cu, Pb, K, and Ni than did the wild riverine plants.The U.S. Governments right to retain a non-exclusive royalty free licence in and to any copyright is acknowledged.     

Environmentally stratified sampling design for the development of Great Lakes environmental indicators

Understanding the relationship between human disturbance and ecological response is essential to the process of indicator development. For large-scale observational studies, sites should be selected across gradients of anthropogenic stress, but such gradients are often unknown for a population of sites prior to site selection. Stress data available from public sources can be used in a geographic information system (GIS) to partially characterize environmental conditions for large geographic areas without visiting the sites. We divided the U.S. Great Lakes coastal region into 762 units consisting of a shoreline reach and drainage-shed and then summarized over 200 environmental variables in seven categories for the units using a GIS. Redundancy within the categories of environmental variables was reduced using principal components analysis. Environmental strata were generated from cluster analysis using principal component scores as input. To protect against site selection bias, sites were selected in random order from clusters. The site selection process allowed us to exclude sites that were inaccessible and was shown to successfully distribute sites across the range of environmental variation in our GIS data. This design has broad applicability when the goal is to develop ecological indicators using observational data from large-scale surveys.     

Circular economy application for a Green Stadium construction towards sustainable FIFA world cup Qatar 2022™

The construction industry is responsible for a significant amount of raw material consumption and environmental footprints. Therefore, sustainable construction became a hot topic, which strives to reduce material consumption, limit constructional waste disposal, and decrease contribution to climate change. In line with Qatar's commitment to organizing a sustainable FIFA World Cup in 2022, this study aims to conduct an environmental life cycle assessment (LCA) for the construction of the Education City Stadium. The work presented here provides the first empirical LCA for analyzing the environmental and economic impacts of circular economy application in a World Cup stadium. In this research, the cyclopean concrete (CYC) methodology was utilized, which incorporate the site excavated boulders with the concrete mix to cast the under-raft foundation of the stadium. This approach was compared to the conventional concrete (CC) casting approach to assess the extent to which the newly developed methodology can reduce the environmental and economic burdens. The obtained results have shown a 32% reduction in greenhouse gas emissions when adapting the CYC approach. Thus, the CYC holds a strong promise to achieve the required structural behavior with a low-cost alternative material from existing waste products in Qatar and a lower environmental impact than the CC.     

Residents’ concerns and attitudes toward a municipal solid waste landfill: integrating a questionnaire survey and GIS techniques

The ever-growing industry of municipal solid waste (MSW) disposal appeals to the growing need for disposal facilities, and MSW treatment facilities are increasingly an environmental and public health concern. Residents living near MSW management facilities are confronted with various risk perceptions, especially odour. In this study, in an effort to assist responsible decision-makers in better planning and managing such a project, a structured questionnaire was designed and distributed to assess the nearby residents’ concerns and attitudes surrounding the Laogang Landfill in Shanghai. Geographic information system techniques and relevance analysis were employed to conduct the spatial analysis of physical perceptions, especially odour annoyance. The findings of the research indicate that a significant percentage of the responding sample was aware of the negative impacts of landfills on the environment and public health, and residents in close proximity preferred to live farther from the landfill. The results from the spatial analysis demonstrated a definite degree of correlation between odour annoyance and distance to the facility and proved that the benefits of the socially disadvantaged have been neglected. The research findings also direct attention to the important role of public participation, information disclosure, transparency in management, and mutual communication to avoid conflicts and build social trust.     

An Improved Rating System for Assessing Surface Water Contamination Potential from MSW Landfills

Leachate emission from uncontrolled municipal solid waste landfills (referred to as waste sites in the present study) is a major threat to the environment and living beings in its vicinity. Surface water contamination potential resulting from leachate may be used as one of the criteria for prioritization of sites for remediation purposes. The existing hazard rating systems that prioritize waste sites considering surface water contamination potential as one of the criteria are mainly suited for the developed countries where these were developed initially. In developing countries like India, the set of conditions differ from those in developed countries, and therefore the existing systems may not be suitable for developing countries. Thus in the present study, an improved system is proposed to assess surface water contamination potential from MSW sites. The system is based on the concept of Source, Pathway and Receptor. The proposed system employs parameters derived from the review of existing rating systems and selects their best and worst values based on literature review, design standards and field conditions. The importance weights of the system parameters have been decided based on expert judgment using Delphi technique. Sensitivity analysis of the system shows that the improved system is more sensitive than the existing systems for the site conditions encountered in developing countries. Monte Carlo analysis of the proposed system confirms the spread of the scores obtained from the system over the full scale of 0–1000. The improved system is compared with existing systems by applying it to waste sites from metropolitan cities of India and performing clustering analysis on the rating scores. The clustering analysis shows that the rating scores from the improved system are less clustered as compared to the scores from the existing systems. This demonstrates that the improved system makes a better tool to distinctly prioritize the waste sites for remediation purpose.     

A quantitative methodology for indexing environmental sensitivity and pollution potential

A methodology for rating the suitability of sites forthe location of industrial facilities is formulated and appliedto the case of a coal-fired power plant location. The methodologycomprises two major interlinked components: the environmentalplant location indexing component, which involves theidentification, scaling and weighting of environmentalsensitivity factors; and the impact analysis component, whichinvolves the superimposition of the pollution generation impactsof an industrial facility on spatially gridded zones of variousenvironmental sensitivities. For each rectangular areal unitdefined by a square grid, the Unit Pollution Potential Index isdetermined by the severity and distribution of key environmentalsensitivity factors and the coverage of superimposed pollutanteffects as determined by contaminant fate and transport models.For any alternative site of a planned facility, the summation ofthe unit indices over the area of influence of the facilityprovides the quantitative Pollution Index, which can be used as abasis for comparison of alternative sites for planned facilities.For this paper, this methodology is applied to the hypotheticalcase of the siting of a coal-fired power plant in thenortheastern region of the United States, in which threealternative sites are considered. The three sites: A, B and Cyielded indices of 47.83, 47.91 and 47.6, respectively, indicatingthat site C is the most suitable for siting the power plant.     

东莞市城市功能区噪声自动监测点位布设初探

依据功能区环境噪声普查数据和城市环境噪声功能区分布特征,进行环境噪声自动监测点位布设.研究的原则和方法,对环境噪声自动监测点位选取具有一定的参考价值和指导意义.