The devil is in the details (or the surface): impact of surface structure and surface energetics on understanding the behavior of nanomaterials in the environment

Metal and metal oxide nanomaterials are found in many consumer products for use in a wide range of applications including catalysis, sensors and contaminant remediation. Because of the extensive use of metal-based nanomaterials, there are concerns that these materials have the potential to get into the environment sometime during production, distribution, use and/or disposal. In particular, there exists the potential that they will make their way into water systems, e.g. drinking water systems, ground water systems, estuaries and lakes. In this review, some of the uncertainties in understanding nanoparticle behavior, which is often due to a lack of fundamental knowledge of the surface structure and surface energetics for very small particles, are discussed. Although classical models may provide guidance for understanding dissolution and aggregation of nanoparticles in water, it is the detailed surface structure and surface chemistry that are needed to accurately describe the surface free energy, a large component of the total free energy, in order to fully understand these processes. Without this information, it is difficult to develop a conceptual framework for understanding the fate, transport and potential toxicity of nanomaterials. Needed research areas to fill this void are discussed.     

Spatial distribution, electron microscopy analysis of titanium and its correlation to heavy metals: occurrence and sources of titanium nanomaterials in surface sediments from Xiamen Bay, China

Titanium nanomaterials are likely to sink into sediments in substantial quantities due to their wide use in a number of applications for decades. To assess the potential environmental consequences, a better understanding is required of the occurrence and sources of titanium (Ti) nanomaterials in sediments. In this research, we provide the first report of the Ti concentrations and the morphology and composition of Ti-based solids in surface sediments from Xiamen Bay, China. Results indicated that the anthropogenic Ti concentrations in the surface sediments from Xiamen Bay reached approximately 2.74 g kg(-1). Ti nanomaterials could be found in sediments with elevated Ti concentrations, which were often aggregated to a few hundred nanometers (<300 nm) and were composed of several spherical particles, less than 50 nm in size, that were made solely of TiO(x). However, Ti particles (approx. 300-700 nm) could be also found in sediments with lower Ti concentrations, which were presumably components of the natural clay mineral kaolinite. Ti nanomaterials could be easily distributed in sediments associated with elevated levels of organic matter and preferentially attach to those sediments with elevated fine fractions. As a sentinel, or tracer, for other nanomaterials, the field-scale investigation of Ti nanomaterials would contribute to increasing our knowledge on the behavior of engineered nanomaterials in an aquatic environment.     

Dielectrophoretic separation of Bacillus subtilis spores from environmental diesel particles

Isolation of pathogenic bacteria from non-biological material of similar size is a vital sample preparation step in the identification of such organisms, particularly in the context of detecting bio-terrorist attacks. However, many detection methods are impeded by particulate contamination from the environment such as those from engine exhausts. In this paper we use dielectrophoresis--the induced motion of particles in non-uniform fields--to successfully remove over 99% of diesel particulates acquired from environmental samples, whilst letting bacterial spores of B. subtilis pass through the chamber largely unimpeded. We believe that such a device has tremendous potential as a precursor to a range of detection methods, improving the signal-to-noise ratio and ultimately improving detection rates.     

Genetically modified organisms and monitoring

The genetic modification of organisms for food use has raised serious concern about the potential for adverse effects on the environment, ecosystems and on the health of humans and animals. As a relatively new technology, its impacts remain uncertain but could range from disturbances to the genetic functioning of individual organisms to a reduction in the biodiversity of farmland. As a result, the question of how to monitor for potential impacts is beset with problems. The fact that genetic modification can be used on a range of organisms for a variety of purposes means that those developing monitoring systems will need to be as imaginative as those developing GMOs. In the case of genetically modified organisms (GMOs) for food use, concern has focussed on the transfer of genes to other organisms, the potential for effects on non-target organisms, or on the health of humans and animals, and the likelihood of adverse effects on wildlife due to changes in farming practice. As with other new and unfamiliar technologies, genetic modification is also plagued by the problem of uncertainty. Novel genes are inserted randomly into the genome of the host organisms, and this leads to the possibility of unexpected effects. Unanticipated environmental disasters, such as the concentration of persistent organic pollutants in ecosystems at high latitudes, have highlighted the need for monitoring despite the obvious difficulties inherent in monitoring for unexpected effects.     

Leaching potential of silver from nanosilver-treated textile products

The use of nanosilver as an antibacterial agent for various products has increased, especially so, in textiles. This study aims to investigate the potential of Ag to leach from commercial products which contain nano-Ag by using the toxicity characteristic leaching procedure (TCLP) test in accordance with USEPA method 1311. Eight nano-Ag products were purchased from the market. Only those products that are likely to be disposed of in a landfill after end use were selected. Nano-Ag fabrics of different concentrations were also prepared at the laboratory scale, and the TCLP test was performed on them as well. The current study assumes that the new products were discarded without use. The Ag content was quantified by inductively coupled plasma–mass spectroscopy (ICP-MS) and ranged from 0.95 to 2.82 μg/g of the product in the commercial products and from 1.49 to 350 μg/g of the product in the lab-prepared fabrics. In the TCLP test results, Ag concentrations ranged from 4.3 to 64.9 μg/L in the commercial products and from 28.9 to 28,381 μg/L in the lab-prepared fabrics. The results also indicate that the amount of Ag released depends on the type of the fabrics. Additionally, the size of the nano-Ag released in percentage is different for each prepared fabric. This study can help in understanding the amount of Ag released during the disposal phase of a product in a landfill.     

Urban stormwater harvesting and reuse: a probe into the chemical, toxicology and microbiological contaminants in water quality

Stormwater is one of the last major untapped urban water resources that can be exploited as an alternative water source in Australia. The information in the current Australian Guidelines for Water Recycling relating to stormwater harvesting and reuse only emphasises on a limited number of stormwater quality parameters. In order to supply stormwater as a source for higher value end-uses, a more comprehensive assessment on the potential public health risks has to be undertaken. Owing to the stochastic variations in rainfall, catchment hydrology and also the types of non-point pollution sources that can provide contaminants relating to different anthropogenic activities and catchment land uses, the characterisation of public health risks in stormwater is complex, tedious and not always possible through the conventional detection and analytical methods. In this study, a holistic approach was undertaken to assess the potential public health risks in urban stormwater samples from a medium-density residential catchment. A combined chemical–toxicological assessment was used to characterise the potential health risks arising from chemical contaminants, while a combination of standard culture methods and quantitative polymerase chain reaction (qPCR) methods was used for detection and quantification of faecal indicator bacteria (FIB) and pathogens in urban stormwater. Results showed that the concentration of chemical contaminants and associated toxicity were relatively low when benchmarked against other alternative water sources such as recycled wastewater. However, the concentrations of heavy metals particularly cadmium and lead have exceeded the Australian guideline values, indicating potential public health risks. Also, high numbers of FIB were detected in urban stormwater samples obtained from wet weather events. In addition, qPCR detection of human-related pathogens suggested there are frequent sewage ingressions into the urban stormwater runoff during wet weather events. Further water quality monitoring study will be conducted at different contrasting urban catchments in order to undertake a more comprehensive public health risk assessment for urban stormwater.     

Monitoring and analysis of natural vegetation in a Special Protected Area of Mountain Antichasia—Meteora, central Greece

Natural ecosystems are renewable resources with special environmental, social, and economical attributes and characteristics. The increasing need of human beings for a better environment results in the use of new technologies that offer many advantages in detecting changes in the ecosystems. Remote sensing tools, technology, and the spatial analysis of the Geographic Information System were used in determining any changes in this study which attempts to classify land cover over a 10-year period. The study area is in Thessaly, central Greece, and has been classified as a Special Protection Area, because of its important wild fauna. The results have shown that current technologies can be used for modeling environmental parameters which improve our knowledge of the attributes, characteristics, situation, trends, and changes of natural ecosystems. The changes over time that have been observed result from the development of the vegetation or to anthropogenic and socioeconomic reasons. Rational range management will be a very comprehensive tool for farmers. This action will have a positive impact on flora in the rangelands. The core strategy is to combine forest, pasture, and livestock so that each component produces usable products.     

Acute and reproductive toxicity of nano-sized metal oxides (ZnO and TiO₂) to earthworms (Eisenia fetida)

An increase in nanomaterial applications will likely lead to an increased probability of environmental exposures, raising concerns regarding the safety of these materials. Recent studies have indicated that manufactured nanomaterials, such as metal oxides, have the potential to be harmful to aquatic and terrestrial organisms. The majority of nano-metal oxide research addressing potential toxicological issues has been focused in aquatic environments with very little terrestrial data. This study characterized the acute and reproductive toxicity of zinc oxide (ZnO) and titanium dioxide (TiO(2)) to earthworms (Eisenia fetida) in a terrestrial system. Following a 14 d exposure, nano-sized ZnO on filter paper was acutely toxic to E. fetida, while nano-sized TiO(2) did not exhibit acute toxicity. In contrast, neither nano-sized ZnO nor TiO(2) exhibited acute toxicity to earthworms in sand. Both nano-sized ZnO and TiO(2), following a 4 week exposure, caused reproductive effects in earthworms in artificial soil. Overall, nano-sized ZnO exhibited greater toxicity than nano-sized TiO(2) in Eisenia fetida.     

Characterization and environmental implications of nano- and larger TiO(2) particles in sewage sludge, and soils amended with sewage sludge

Titanium dioxide (TiO(2)) is the most extensively used engineered nanoparticle to date, yet its fate in the soil environment has been investigated only rarely and is poorly understood. In the present study, we conducted two field-scale investigations to better describe TiO(2) nano- and larger particles in their most likely route of entry into the environment, i.e., the application of biosolids to soils. We particularly concentrated on the particles in the nano-size regime due to their novel and commercially useful properties. First, we analyzed three sewage sludge products from the US EPA TNSSS sampling inventory for the occurrence, qualitative abundance, and nature of TiO(2) nano- and larger particles by using analytical scanning electron microscopy and analytical (scanning) transmission electron microscopy. Nano- and larger particles of TiO(2) were repeatedly identified across the sewage sludge types tested, providing strong evidence of their likely concentration in sewage sludge products. The TiO(2) particles identified were as small as 40 nm, and as large as 300 nm, having faceted shapes with the rutile crystal structure, and they typically formed small, loosely packed aggregates. Second, we examined surface soils in mesocosms that had been amended with Ag nanoparticle-spiked biosolids for the occurrence of TiO(2) particles. An aggregate of TiO(2) nanoparticles with the rutile structure was again identified, but this time TiO(2) nanoparticles were found to contain Ag on their surfaces. This suggests that TiO(2) nanoparticles from biosolids can interact with toxic trace metals that would then enter the environment as a soil amendment. Therefore, the long-term behavior of TiO(2) nano- and larger particles in sewage sludge materials as well as their impacts in the soil environment need to be carefully considered.     

环境中有机紫外吸收剂前处理及仪器分析方法研究进展

有机紫外吸收剂(OUVs)是广泛应用于个人护理品及工业产品的一种光稳定剂,也是一种新型"准"持久性有机污染物。由于环境样品基质复杂,且OUVs种类多、含量低,快速高效的样品前处理及准确灵敏的检测方法是提高OUVs监测精准度的基础。综述了自2005年以来环境样品中OUVs的常规前处理方法及分析方法。首先,在介绍水体、沉积物、生物样品前处理方法应用的基础上,分析了富集填料、洗脱剂、净化方法等实验条件对回收率的影响,目前在水体、沉积物、生物样品中,OUVs的回收率分别为14%~133.7%、30%~183%、46%~128%。其次,总结了质谱技术在OUVs分析中的应用,表明OUVs检测方法已经由传统的气相色谱-单四极杆联用逐渐过渡到液相色谱-串联质谱联用,并且着重阐述了离子源对OUVs信号强度影响的重要性。最后,结合OUVs监测现状,展望了环境样品中OUVs监测分析方法的发展趋势。     

A synthesis of variability in nearshore Alaskan marine populations

One of the primary goals of any monitoring program is to detect anthropogenic changes; however natural variability can be so high that it prevents detection of human-induced effects. This project synthesized existing data to identify patterns of temporal variation within nearshore marine habitats in the Gulf of Alaska and was motivated by the need for monitoring in this environment vulnerable to oil spills, such as the Exxon Valdez. I collected 786 time series that were greater than 2 years in length from unimpacted (control) sites for 226 species. Temporal variability (CV) varied widely from 1% to 447%, averaged 89%, and was not significantly different among marine populations of birds, mammals, fish, algae and invertebrates. Temporal variability of invertebrates and algae were not significantly different when abundance was measured as biomass, percent cover or density. Both invertebrates and algae showed higher variability in low intertidal habitat compared to high intertidal habitat. For invertebrates, populations on bedrock substrates had greater temporal variability than those on cobble or soft sediment substrates, while there was not a significant difference for algae on either cobble or bedrock substrates. Many of these results are surprising, given differences in movement patterns, survey methods, life histories, and so forth. These results suggest that no single group, measure or habitat will be better or worse for monitoring and detecting change. Understanding variability is a difficult task, but until we tackle it, we will likely not understand or have predictive capabilities in ecological populations and communities.     

饮用水消毒副产物--卤乙酸的检测

卤乙酸是饮用水氯化消毒中一类主要的消毒副产物,由于存在的广泛性和潜在的健康危害,许多国家和卫生组织相继将其列为饮用水常规监测项目,而我国至今还没有相关规定;为了更好地控制饮用水中卤乙酸的形成,世界各国科研人员先后研究和开发出了性能逐趋完善的多种分析检测方法;本文在国内外文献调研的基础上,对卤乙酸的各种分析检测方法进行了简要的介绍,并指明了今后的发展方向.     

我国环境中需重点控制的农药残留及其检测方法

文章根据我国农药生产和使用的特点,结合环境污染事故中常见的农药、保障农产品安全需控制的农药残留等,阐述了我国环境中需重点控制的农药残留种类,并对其监测方法和控制标准进行了综述,旨在为农药污染事件中快速判断污染类别、科学确定监测方法、及时处置污染提供技术保障。     

The effects assessment of firm environmental strategy and customer environmental conscious on green product development

The purpose of this study is to examine why both parties (industry and consumer market) have mutual interests in protecting the environment but they still are hesitant to act green. The study used two-stage sampling from consumer market to depict ideal green product characteristics and reliable toy companies, and visit these companies for the second sample collection to examine whether the organizational eco-innovation strategy with customer value has a positive effect on green product development. In other words, the customer's benefit is an important factor for new product development strategy for green toys. This research shows that the willingness to buy green toys increases if most people in society buy green toys. This represents that customers are environmentally conscious and care about protecting the environment, or buying green toys is the result of a new economic trend and childhood education. The willingness to buy green toys increases if customers think that green products implies an enhancement on new product development to toy manufacturers. Further, if manufacturers are able to manage the difficulty of cooperation with all parties in the supply chain and difficulties related to production, they are willing to adopt customers' perceived value on green toys for their new product development strategy. It is rare to find academic research discussing the perspectives of both consumers and manufacturers in the same study because the research topic is very broad and many conditions must be considered. This research aims to find the effect of consumer-perceived value and company eco-innovation on green product development.     

Occurrence and removal of titanium at full scale wastewater treatment plants: implications for TiO2 nanomaterials

Titanium dioxide nanoparticles increasingly will be used in commercial products and have a high likelihood of entering municipal sewage that flows to centralized wastewater treatment plants (WWTPs). Treated water (effluent) from WWTPs flows into rivers and lakes where nanoparticles may pose an ecological risk. To provide exposure data for risk assessment, titanium concentrations in raw sewage and treated effluent were determined for 10 representative WWTPs that use a range of unit processes. Raw sewage titanium concentrations ranged from 181 to 1233 μg L(-1) (median of 26 samples was 321 μg L(-1)). The WWTPs removed more than 96% of the influent titanium, and all WWTPs had effluent titanium concentrations of less than 25 μg L(-1). To characterize the morphology and presence of titanium oxide nanoparticles in the effluent, colloidal materials were isolated via rota-evaporation, dialysis and lyophilization. High resolution transmission electron microscopy and energy dispersive X-ray analysis indicated the presence of spherical titanium oxide nanoparticles (crystalline and amorphous) on the order of 4 to 30 nm in diameter in WWTP effluents. This research provides clear evidence that some nanoscale particles will pass through WWTPs and enter aquatic systems and offers a methodological framework for collecting and analyzing titanium-based nanomaterials in complex wastewater matrices.     

Predicting bioavailability and bioaccumulation of arsenic by freshwater clam Corbicula fluminea using valve daily activity

There are many bioindicators. However, it remains largely unknown which metal–bioindicator systems will give the reasonable detection ranges of bioavailable metals in the aquatic ecosystem. Various experimental data make the demonstration of biomonitoring processes challenging. Ingested inorganic arsenic is strongly associated with a wide spectrum of adverse health outcomes. Freshwater clam Corbicula fluminea, one of the most commonly used freshwater biomomitoring organisms, presents daily activity in valve movement and demonstrates biotic uptake potential to accumulate arsenic. Here, a systematical way was provided to dynamically link valve daily activity in C. fluminea and arsenic bioavailability and toxicokinetics to predict affinity at arsenic-binding site in gills and arsenic body burden. Using computational ecotoxicology methods, a valve daily rhythm model can be tuned mathematically to the responsive ranges of valve daily activity system in response to varied bioavailable arsenic concentration. The patterned response then can be used to predict the site-specific bioavailable arsenic concentration at the specific measuring time window. This approach can yield predictive data of results from toxicity studies of specific bioindicators that can assist in prediction of risk for aquatic animals and humans.     

Uptake, translocation, and accumulation of manufactured iron oxide nanoparticles by pumpkin plants

Rapid development and application of nanomaterials and nanotechnology make assessment of their potential health and environmental impacts on humans, non-human biota, and ecosystems imperative. Here we show that pumpkin plants (Cucurbita maxima), grown in an aqueous medium containing magnetite (Fe3O4) nanoparticles, can absorb, translocate, and accumulate the particles in the plant tissues. These results suggest that plants, as an important component of the environmental and ecological systems, need to be included when evaluating the overall fate, transport and exposure pathways of nanoparticles in the environment.     

Requirements and opinions of three groups of people (aged under 35, between 35 and 50, and over 50 years) to create a living space suitable for different life situations

The role of this study was to determine which changes people think they need to make in their home in response to getting older. At an advanced age, the likelihood of different limitations, such as vision impairment, hearing impairment, or physical inability, are increased. At present, when faced with such limitations, tenants are often forced to leave their long-term living spaces, as these spaces cannot serve their “new” individual needs. This transition from the privacy of their home to a new environment is often a painful change. They must leave a well-known environment, as their homes cannot be adapted to their new needs. The aim of this paper is to develop a comprehensive approach for the design of an exterior and interior space which can serve people through all stages of life, particularly in terms of mobility. This means that, even if an unexpected situation incurs changes in an individual's movement abilities or physiological limitations not only by natural aging, but also according to accidents or disabilities their living space can be adapted to the given conditions. The results of a survey conducted in Germany and Slovakia are presented. In the survey, respondents expressed their opinion on what they considered important in creating an adaptive environment, considering various life changes. The results of the survey are statistically processed and analyzed by the ANOVA method, a form of statistical hypothesis testing. The results are processed graphically and presented in tables, along with explanations. The results could be of an interest to the architects and designers of such environments. Based on the results of the survey, studies of possible modifications of flats and houses are developed. These results are analyzed in terms of three age groups: people aged below 35, those aged 35–50, and those aged over 50. People under 35 are considered to be quite young, with different views on life and on the environment. Their priorities typically differ from those of people around 50. People aged 50 more; have been under medical treatment for a consistent amount of time. This group of people is still active; however, they experience different design requirements for their potential home.     

Environmental impact of Information Communication Technology: A review of econometric assessment methods,influential mechanism,and influential direction

In recent decades, the rapid development of the global society and economy has brought serious environmental problems, such as air pollution, greenhouse effect, and ecosystem degradation, all of which have attracted wide attention. Simultaneously, the use of Information Communication Technology (ICT) has been on the rise since the 1980s, which stimulates the growth of the economy and has a certain degree of impact on the ecological environment. Accordingly, the scientific community's interest in assessing this impact has grown considerably, and econometric methods are widely used as evaluation tools. However, the research results are often different in different regions, periods, environmental proxies, and ICT. Some studies indicate that the development of ICT is beneficial to environmental improvement, while others state that it is not. Therefore, a comprehensive analysis of the methods, mechanisms, and relative policy suggestions of this topic is desiderated. To address this gap, this paper carries out a systematic literature review of the usage of econometric methods in the assessment of the environmental impact of ICT. Among the 472 articles retrieved from scientific literature databases, 46 met the inclusion criteria and were analyzed in detail. This study aims to provide scholars with a mental picture of the current state of scientific research, identify the factors that influence the direction of ICT's impact on the environment, and enable future researchers to use more reliable and accurate estimation methods. The methods used in selected articles were divided into two main groups (i.e., time series models and panel data models), and panel data models were further subdivided into five categories. The detailed flow of these methods is summarized, and new advanced pre-test methods and estimators are highlighted. Furthermore, the analysis also indicates that among all the countries and regions involved in the selected articles, there is a non-strict inverted U-shaped curve between the level of socio-economic development and the direction of the impact of ICT on the environment. Finally, current research challenges are discussed, and potential directions for future research on this topic are also projected.