Trimethylphenylammonium-Smectite as an Effective Adsorbent of Water Soluble Aromatic Hydrocarbons

Homoionic trimethylphenylammonium (TMPA)- and tetramethylammonium (TMA)-clays were prepared by Ion-exchange reactions using two smectite clays that differed in their cation exchange capacities and surface charge densities. These clays are referred to as a low-charge (SAC) and high-charge (SWa)-smectite. The organo-clays were evaluated as adsorbents of water soluble aromatic hydrocarbons including benzene, toluene, ethylbenzene, p-xylene, butylbenzene, and naphthalene. All of the aromatic hydrocarbons tested were effectively removed from water by the low-charge TMPA-smectite. The low-charge TMA-smectite was an effective adsorbent for benzene but was ineffective in the removal of the alkylbenzenes and naphthalene from water. The effect of surface charge on the adsorption properties of TMPA-smectite was pronounced. The uptake of benzene and toluene by the high-charge TMPA-smectite was greatly reduced as compared to the low-charge TMPAsmectite. These results suggest the utility of TMPA-smectite as a liner material for petroleum storage containers and waste disposal reservoirs. The use of TMPA-smectite in conjunction with Na-smectite would provide a barrier with the ability to impede the flow of water and to effectively adsorb dissolved organic contaminants.     

Atmospheric BTX and polyaromatic hydrocarbons in Rio de Janeiro, Brazil

Polycyclic aromatic and monoaromatic (benzene, toluene and xylene, or BTX) hydrocarbons were monitored in Rio de Janeiro, Brazil, during the summer of 1998/1999. The levels of these aromatic chemicals decreased with distance from main roads, indicating mobile sources are the main pollutant emitters in this Latin American city. Benzo[ghi]perylene/indeno[1,2,3-cd]pyrene and benzene/toluene ratios corroborate this idea. However, higher benzene/toluene ratios at one of the major access routes into the city suggest pollutant inputs from a nearby refinery. Literature data were reviewed in order to outline differences and similarities among sources and levels of aromatic pollutants in large urban agglomerations worldwide. Concentrations of benzo[a]pyrene and benzene, which are well-known carcinogenic chemicals, were relatively low in Rio de Janeiro. This fact was attributed to specific atmospheric conditions during the tropical summer and differences in vehicle fuel composition.     

In situ biodegradation determined by carbon isotope fractionation of aromatic hydrocarbons in an anaerobic landfill leachate plume (Vejen,Denmark)

Concentrations and isotopic compositions (13C/12C) of aromatic hydrocarbons were determined in eight samples obtained from the strongly anoxic part of the leachate plume downgradient from the Vejen Landfill (Denmark), where methanogenic, sulfate-reducing and iron-reducing conditions were observed. Despite the heterogeneous distribution of the compounds in the plume, the isotope fractionation proved that ethylbenzene and m/p-xylene were subject to significant biodegradation within the strongly anoxic plume. The isotope fractionation factors (alphaC) for the degradation of the m/p-xylene (1.0015) and ethylbenzene (1.0021) obtained from the field observations were similar to factors previously determined for the anaerobic degradation of toluene and o-xylene in laboratory experiments, and suggest that in situ biodegradation is one major process controlling the fate of these contaminants in this aquifer. The isotope fractionation determined for 1,2,4-trimethylbenzene and 2-ethyltoluene suggested in situ biodegradation; however, the isotopic composition did not correlate well with the respective concentration as expressed by the Rayleigh equation. Some other compounds (1,2,3-trimethylbenzene, o-xylene, naphthalene and fenchone) did not show significant enrichments in delta13C values along the flow path. The compound concentrations were too low for accurate isotope analyses of benzene, toluene, 1- and 2-methylnaphthalene, while interferences in the chromatography made it impossible to evaluate the isotopic composition for 4-ethyltoluene, 1,3,5-trimethylbenzene and camphor.In addition to demonstrating the potential of assessing isotopic fractionation as a means for documenting the in situ biodegradation of complex mixtures of aromatic hydrocarbons in leachate plumes, this study also illustrates the difficulties for data interpretation in complex plumes and high analytical uncertainties for isotope analysis of organic compounds in low concentration ranges.     

有机污染物湿地生物降解实验规律研究

本文以苯、甲苯和萘为对象 ,通过实验研究 ,测定有机污染物的土壤 水吸附平衡过程、在水溶液中生物降解过程以及在湿地系统 (即土壤 水 微生物系统 )中生物降解过程 ,并以质量守恒定律为基础 ,建立有机污染物湿地生物降解过程综合数学模型 ;数学模型通过实验验证。利用模型 ,定量预测了污染物生物降解所需的时间和程度 ,并提出动力学因子FK,判断污染物湿地生物降解速度的控制因素 ,定量预测了污染物在土壤固相的浓度分布规律     

Fast and quantitative measurement of benzene,toluene and C2-benzenes in automotive exhaust during transient engine operation with and without catalytic exhaust gas treatment

Time-Resolved Chemical Ionization Mass Spectrometry (CIMS) has been used to investigate the emission profiles of benzene, toluene and the C₂-benzenes (xylenes and ethyl benzene) in automotive exhaust during transient engine operation. On-line emission measurements with a frequency of 1–5 Hz clearly identified the critical driving conditions that are mainly responsible for the overall aromatic hydrocarbon emissions. The passenger car, equipped with a catalytic converter showed significant BTXE-emissions only in the first part of the New European Driving Cycle (NEDC) due to sub-optimal catalyst temperature. On the same car without a catalytic converter, emissions of aromatic hydrocarbons were detected over the entire test run and the benzene–toluene mixing ratios of the exhaust gas were rather constant. With catalytic exhaust gas treatment the observed benzene–toluene mixing ratios varied to a greater extent reflecting predominantly different catalytic converter conditions. The average molar ratio of benzene over toluene rose from 0.33 to 0.53 upon exhaust gas treatment. With catalytic converter the emissions during extra urban (EUDC) driving repeatedly showed benzene–toluene mixing ratios >1 and an average molar benzene/toluene ratio of 0.74 was detected during the EUDC part of the driving cycle. Whereas the total hydrocarbon (T.HC) emissions were decreased by 83% upon exhaust gas treatment the overall reduction of the benzene emissions was only 70%.     

紫外光(UV)光解油田采出水中多环芳烃

为了探讨紫外光光解人工模拟油田采出水中多环芳烃的降解效率,利用自制反应装置对油田采出水中多环芳烃(PAHs)的紫外光光解做了一个初步研究。研究结果证明,紫外光光解对油田采出水中的多环芳烃萘和芴有显著的降解能力。实验室的测试表明,与紫外UVA(365 nm)、UVB(308 nm)的光照相比,紫外UVC(254 nm)在光照60 min的条件下,2种多环芳烃各自的去除率都近似达到了99%。可见,在光解效力和暴露时间两方面,紫外UVC对采出水中萘和芴的去除具有相对稳定和比较高的效率。     

Speciated Hydrocarbon Emissions from the Combustion of Single Component Fuels. II. Catalyst Effects

Six single-component fuels (isooctane, n-heptane, 1-hexene, cyclohexane, methyl-t-butyl ether (MTBE), and toluene) and a multicomponent tracer fuel were burned in a pulse flame combustor (PFC) and reacted over a three-way automotive catalyst. The composition of the raw, uncatalyzed PFC exhaust was characterized in Part I of this study. In Part II, we focus on the conversions of the individual exhaust HC species over the catalyst. In accord with previous studies, the order of reactivity observed for the various classes of HC species was: methane (least reactive) < saturated HC < aromatics < unsaturated HC (most reactive). These differences in catalytic reactivity led to increases in the relative concentrations of methane and some saturated hydrocarbons in the post catalyst exhaust, and corresponding decreases in the relative concentrations of aromatic and unsaturated hydrocarbons. Oxygenated organic compounds showed wide variability in catalytic reactivity depending on the specific compounds involved. Catalytic conversion of the air toxic, 1,3-butadiene, was essentially complete to within detection limits. Benzene and toluene appeared to have similar intrinsic catalytic reactivities. However, net conversion of benzene in most instances was significantly less than that of toluene owing to demethylation of toluene (to form benzene) occurring in parallel with benzene oxidation. Rich combustion of both isooctane and tracer fuel led to the production of methane by the catalyst, primarily from reactions of acetylene and small olefins.     

Solubilization of PAH mixtures by three different anionic surfactants

Solubilization of naphthalene and phenanthrene into the micelles formed by three different anionic surfactants was investigated for single, binary, and ternary mixtures including pyrene. The three surfactants were sodium dodecylbenzene sulfonate (SDDBS), monoalkylated disulfonated diphenyl oxide (MADS-C12), and dialkylated disulfonated diphenyl oxide (DADS-C12). The order of increasing solubility enhancement of naphthalene and phenanthrene was SDDBS < MADS-C12 < < DADS-C12, which indicates that the hydrophobic chains in micellar core play more important role for the solubilization of polycyclic aromatic hydrocarbons (PAHs) than the benzene rings in palisade layer of a micelle. The solubility enhancement of naphthalene was slightly changed in PAH mixtures. The solubility of phenanthrene was greatly enhanced in presence of naphthalene but reduced in presence of pyrene. The explanation for these results could be that less hydrophobic compounds can be solubilized at the interfacial region of a hydrophobic core, which reduces the interfacial tension between the core and water, and then the reduced interfacial tension can support a larger core volume for the same interfacial energy.     

Urban atmospheric pollution: personal exposure versus fixed monitoring station measurements

We initiated the PETER (pedestrian environmental traffic pollutant exposure research) project to investigate pedestrians' exposure to traffic related atmospheric pollutants, based on data obtained with the collaboration of selected categories of pedestrian urban workers. We investigated relations between roadside personal exposure levels of volatile aromatic hydrocarbons (including benzene) and particulate matter <10 microm (PM10) among traffic police (n = 126) and parking wardens (n = 50) working in downtown Bologna, Italy. Data were collected from workshifts throughout four 1-week periods in different seasons of 2000-2001. For benzene and PM10, comparisons were made with measurements by fixed monitoring stations, and influence of localized traffic intensity and meteorological parameters was examined. Roadside personal exposure to benzene correlated more strongly with other volatile aromatic hydrocarbons (toluene, xylenes and ethylbenzene) than with PM10. Benzene and PM10 personal exposure levels were higher than fixed monitoring station values (both p<0.0001). At multivariate analysis, benzene and PM10 data from fixed monitoring stations both correlated with meteorological variables, and were also influenced by localized traffic intensity. Plausibly because of the downtown canyon-like streets, weather conditions (during a period of drought) only marginally affected benzene personal exposure, and moderately affected PM10 personal exposure. These findings reinforce the concept that urban atmospheric pollution data from fixed air monitoring stations cannot automatically be taken as indications of roadside exposures.     

Sustainable oil and grease removal from synthetic stormwater runoff using bench-scale bioretention studies.

One of the principal components of the contaminant load in urban stormwater runoff is oil and grease (O&G) pollution, resulting from vehicle emissions. A mulch layer was used as a contaminant trap to remove O&G (dissolved and particulate-associated naphthalene, dissolved toluene, and dissolved motor oil hydrocarbons) from a synthetic runoff during a bench-scale infiltration study. Approximately 80 to 95% removal of all contaminants from synthetic runoff was found via sorption and filtration. Subsequently, approximately 90% of the sorbed naphthalene, toluene, oil, and particulate-associated naphthalene was biodegraded within approximately 3, 4, 8, and 2 days after the event, respectively, based on decreases in contaminant concentrations coupled with increases of microbial populations. These results indicate the effectiveness and sustainability of placing a thin layer of mulch on the surface of a bioretention facility for reducing O&G pollution from urban stormwater runoff.     

Acute and chronic impacts caused by aromatic hydrocarbons on bacterial communities at Boa Viagem and Forte do Rio Branco Beaches, Guanabara Bay, Brazil

The bacterial community presented significantly different hydrocarbonoclastic activity under acute and chronic impacts. Benzoic acid, toluene, benzene and xylene were used in final concentrations of 5, 10 and 15 mM and bacterial biomass was quantified through protein dosage. Under acute impact, the highest biomass percentages occurred between the 11th and 14th days; under chronic impact, between the 20th and 29th days. Under acute and chronic impacts, the bacterial biomass presented higher nutritional specialization at Boa Viagem Beach, using the aromatic hydrocarbons up to a concentration of 15 mM. Under acute impact, the concentration of the hydrocarbons constituted a critical factor for the bacterial flora from Forte do Rio Beach, because biomass increases only occurred in concentrations of 5 mM; under chronic impact, the aromatic hydrocarbons induced the specialization and increased bacterial biomass for 15 mM toluene. Benzoic acid (15 mM) was used by the bacteria from Boa Viagem and Forte do Rio Branco Beaches.     

Microbial in situ degradation of aromatic hydrocarbons in a contaminated aquifer monitored by carbon isotope fractionation

We present an approach for characterizing in situ microbial degradation using the 13C/12C isotope fractionation of contaminants as an indicator of biodegradation. The 13C/12C isotope fractionation of aromatic hydrocarbons was studied in anoxic laboratory soil percolation columns with toluene or o-xylene as the sole carbon and electron source, and sulfate as electron acceptor. After approximately 2 months' of incubation, the soil microbial community degraded 32 mg toluene l(-1) and 44 mg o-xylene l(-1) to less than 0.05 mg l(-1), generating a stable concentration gradient in the column. The 13C/12C isotope ratio in the residual non-degraded fraction of toluene and o-xylene increased significantly, corresponding to isotope fractionation factors (alphaC) of 1.0015 and 1.0011, respectively. When the extent of biodegradation in the soil column was calculated based on the measured isotope ratios (R(t)) and an isotope fractionation factor (alphaC=1.0017) obtained from a sulfate-reducing batch culture the theoretical residual substrate concentrations (C(t)) matched the measured toluene concentrations in the column. This indicated that a calculation of biodegradation based on isotope fractionation could work in systems like soil columns. In a field study, a polluted, anoxic aquifer was analyzed for BTEX and PAH contaminants. These compounds were found to exhibit a significant concentration gradient along an 800-m groundwater flow path downstream of the source of contamination. A distinct increase in the carbon isotope ratio (delta13C) was observed for the residual non-degraded toluene (7.2 per thousand ), o-xylene (8.1 per thousand ) and naphthalene fractions (1.2 per thousand ). Based on the isotope values and the laboratory-derived isotope fractionation factors for toluene and o-xylene, the extent to which the residual substrate fraction in the monitoring wells had been degraded by microorganisms was calculated. The results revealed significant biodegradation along the groundwater flow path. In the wells at the end of the plume, the bioavailable toluene and o-xylene fractions had been almost completely reduced by in situ microbial degradation. Although indane and indene showed decreasing concentrations downstream of the groundwater flow path, suggesting microbial degradation, their carbon isotope ratios remained constant. As the physical properties of these compounds are similar to those of BTEX compounds, the constant isotope values of indane and indene indicated that microbial degradation did not lead to isotope fractionation of all aromatic hydrocarbons. In addition, physical interaction with the aquifer material during the groundwater passage did not significantly alter the carbon isotope composition of aromatic hydrocarbons.     

Detection of dioxygenase genes present in various activated sludge

GOAL, SCOPE AND BACKGROUND: Activated sludge from refineries contains various microorganisms that could utilize aromatics under aerobic conditions due to the oxygenase enzymes. Dioxygenase enzymes are oxygenases, which are involved in the ring cleavage step of aromatic hydrocarbons. In this study, the selected catabolic loci involved in ring cleavage have been monitored in the activated sludge samples at different time intervals. The investigation of the dioxygenase genes in the Effluent Treatment Plants (ETPs) and evaluation of their presence at different time points provides a clue for the aromatic utilizing potential of the inherent microbial flora. METHODS: The catabolic gene loci pheB, xylE, tod-isp, bed and nahG responsible for the enzymes catechol 1,2-dioxygenase, catechol 2,3-dioxygenase, toluene dioxygenase-iron-sulphur protein component, benzene dioxygenase and naphthalene dioxygenase were used respectively. The time dependent change in eubacterial population was demonstrated by the amplification of 16S rDNA product, followed by restriction digestion. The template DNA was obtained from the activated sludge collected from ETPs. The supporting physiological data for the overall performance of sludge was developed using respirometric analysis. The on-site COD and MLSS analysis for ETP was used in final evaluation. The study was carried out with samples collected from three different ETPs and also from a selected ETP at different time intervals. RESULTS AND DISCUSSION: The respirometric studies were carried out with phenol, catechol, toluene, and naphthalene to arrive at the target genotypes for further study by PCR protocol. The respirometric analysis coupled with the COD and MLSS analysis represented the physiological capacity of the various sludges. Initially, the tracking protocol was optimized by using different sludge samples, which were collected from refineries. The selected genotypes were amplified and their presence has been confirmed using Southern analysis. The gene loci tod-isp, bed and xylE were commonly observed at various time intervals of the sludge from the same source. The gene loci pheB and nahG were found to be relatively rare. CONCLUSION: The 16S rDNA PCR products after restriction digestion produced different DNA fingerprint patterns, suggesting that the microbial community composition was diverse in the three sources. Similarly, the presence of the catechol 2,3-dioxygenase, benzene dioxygenase and toluene dioxygenase genes confirmed the aromatic degrading potential in the various sludges. The probes could not pick the nahG and pheB genes. However, the respirometeric assay suggested that the oxidative capacity to use naphthalene as a substrate exists. RECOMMENDATION AND PERSPECTIVE: Our study of the diversity at various time points from the ETP provided an overview of the shifts of the catabolic composition of the sludge. This also depends on the influential parameters like the incoming pollutant level and the environmental conditions that are prevailing and often changing from time to time. The results of direct DNA extraction and PCR amplification do reflect the relative abundance of a particular catabolic genotype, which could be used to monitor the efficiency of treatment.     

Aromatic hydrocarbons at urban,sub-urban,rural (8°52′N; 67°19′W) and remote sites in Venezuela

Using the novel on-line proton transfer reaction mass spectrometry (PTR-MS) technique, atmospheric concentrations of benzene, toluene, xylenes, and C₉-benzenes were measured in Caracas (urban), Altos de Pipe (sub-urban), Calabozo (rural) and Parupa (remote), during various campaigns in 1999 and 2000.Average daytime mixing ratios measured in Caracas are 1.1, 3.2, 3.7, and 2.7 nmol/mol for benzene, toluene, xylenes, and C₉-benzenes. At the sub-urban site, located only few km from Caracas, relatively low levels (∼20% of the levels measured in Caracas) of these aromatic hydrocarbons were observed.At the rural site during the dry season, higher concentrations of benzene (0.15 nmol/mol) were recorded, whereas those of toluene (0.08 nmol/mol) were lower during that time. The aromatic hydrocarbon ratios in the wet season (benzene: 0.08 nmol/mol; toluene: 0.09 nmol/mol) are consistent with an aged urban plume, whereas biomass burning emissions dominate during the dry season. From rural and urban [benzene]/[toluene] ratios a mean HO concentration of 2.6×10⁶ molecules/cm³ was estimated during the wet season. This value must be considered an overestimate because it does not account for background concentrations which are likely for benzene and toluene.At the remote “La Gran Sabana” region (Parupa) very low mixing ratios (0.031 and 0.015 nmol/mol for benzene and toluene) are showing the pristine region to be unaffected by local sources. From the [benzene]/[toluene] ratio we deduced, that “urban” air arriving from the coastline (350 km) is likely mixed with air containing some background of benzene and toluene.Urban emissions (automobiles) should be the major source of aromatic compounds, however, during the dry season biomass burning seems to make an important contribution.     

Quantification of indoor VOCs in twenty mechanically ventilated buildings in Hong Kong

Information of volatile organic compounds (VOCs) in buildings in Hong Kong is relatively scared compared to other countries. Information of how much VOC accumulation comes from occupants themselves, from building materials and other outdoor sources are scarce even on a global basis. This study aimed at collecting information of the levels of individual VOCs using US-EPA Method TO-14. Twenty building premises including offices and public places such as customer service centers, shopping centers, etc. were studied. Samples were taken during the time slots when the mechanical ventilation system was operating. The 43 VOCs were grouped into three categories, i.e. aromatic hydrocarbons, chlorinated hydrocarbons and organohalogen. The most dominant VOCs found in the indoor samples were benzene, toluene, ethylbenzene, xylenes (BETX), chloroform and trichloroethylene as 100% of the samples were found to contain these VOCs. Besides, more than 75% of the samples were found to contain 1,3,5-trimethylbenzene, methylchloride and dichloromethane. The wt% of chlorinated hydrocarbons (48%) and the wt% of aromatic hydrocarbons (38%) only differed by about 10% in the office sector. Organohalogen (14%) contributed to the smallest fraction of the total on all the premises in the office sector on weight basis. A completely different distribution pattern was found in the non-office sector. The most abundant class of VOCs in terms of weight was aromatic hydrocarbons (80%). The second abundant class of VOCs was chlorinated hydrocarbons (14%) and was much less than the level of aromatic hydrocarbons in terms of weight. Organohalogen (6%) contributed to the smallest fraction of the total on all the premises in the non-office sector on weight basis.     

PAH Growth from the pyrolysis of CPD, indene and naphthalene mixture

In this study, the addition of cyclopentadienyl (CPDyl) moieties to aromatic rings has been investigated experimenNaphthalene was selected as the representative aromatic compound and its pyrolytic reactivity was studied first to obtain background information for the pyrolysis of cyclopentadiene-indene-naphthalene mixture. The experiments were conducted in a 5 s laminar flow reactor over the temperature range of 700-850 degrees C with 50 degrees C increments. PAH growth from naphthalene pyrolysis is mainly attributed to aryl-aryl addition of naphthyl radicals and naphthalene fragmentation, with lower product formation rates comparing with hydrocarbons with CPDyl moieties. The results indicate that naphthalene is less reactive than the CPDyl containing hydrocarbon radical-molecule addition of CPDyl radicals to naphthalene results in phenanthrene, which can also be formed substantially from other growth pathways. This addition occurs mainly at low temperatures and is less favored due to the competition from more reactive indenyl and CPDyl radicals. CPDyl radical addition to naphthalene exhibits limited aromatic growth due to the aromaticity restrictions of naphthalene. The studies of hydrocarbons with and without CPDyl moieties suggest that the reaction pathways of CPDyl bearing hydrocarbons are different from those without these moieties and cannot be adequately accounted for by the existing acetylene addition and aryl-aryl addition mechanisms.     

Polycyclic aromatic hydrocarbons in crude oil-contaminated soil: A two-step method for the isolation and characterization of PAHs

A two-step analytical method is developed for the isolation and characterization of polycyclic aromatic hydrocarbons (PAHs) in crude oil contaminated soil. In the first step, those crude oil components were isolated which are easily mobilized with water from the contaminated soil (determination of groundwater pollution potential). In the second step, the fraction containing the remaining crude oil compounds was extracted using toluene. After the cleanup of the fractions, both fractions were analyzed using high-performance liquid chromatography (HPLC). The HPLC of the toluene extracted fraction shows that along with the sixteen priority pollutants from the US-EPA list, many other polycyclic aromatic hydrocarbons (PAHs) are present as well. It is evident from the chromatograms that a significant amount of PAHs are present as is also the case in the fractions eluted by water. The described method allows the determination of total organic pollutants from crude oil, some of them being potential groundwater contaminants. The major part of the total pollutants could not be mobilized by water and therefore remains in the soil, which was extracted in the second step.     

Characterization of emissions from diffusion flare systems

Emissions from flares typical of those found at oil-field battery sites in Alberta, Canada, were investigated to determine the degree to which the flared gases were burned and to characterize the products of combustion in the emissions. The study consisted of laboratory, pilot-scale, and field-scale investigations. Combustion of all hydrocarbon fuels in both laboratory and pilot-scale tests produced a complex variety of hydrocarbon products within the flame, primarily by pyrolytic reactions. Acetylene, ethylene, benzene, styrene, ethynyl benzene, and naphthalene were some of the major constituents produced by conversion of more than 10% of the methane within the flames. The majority of the hydrocarbons produced within the flames of pure gas fuels were effectively destroyed in the outer combustion zone, resulting in combustion efficiencies greater than 98% as measured in the emissions. The addition of liquid hydrocarbon fuels or condensates to pure gas streams had the largest effect on impairing the ability of the resulting flame to destroy the pyrolytically produced hydrocarbons, as well as the original hydrocarbon fuels directed to the flare. Crosswinds were also found to reduce the combustion efficiency (CE) of the co-flowing gas/condensate flames by causing more unburned fuel and the pyrolytically produced hydrocarbons to escape into the emissions. Flaring of solution gas at oil-field battery sites was found to burn with an efficiency of 62-82%, depending on either how much fuel was directed to flare or how much liquid hydrocarbon was in the knockout drum. Benzene, styrene, ethynyl benzene, ethynyl-methyl benzenes, toluene, xylenes, acenaphthalene, biphenyl, and fluorene were, in most cases, the most abundant compounds found in any of the emissions examined in the field flare testing. The emissions from sour solution gas flaring also contained reduced sulfur compounds and thiophenes.     

Soils impacted by PAHs: Would the stabilized organic matter be a green tool for the immobilization of these noxious compounds?

The objective of this study was to investigate the role of stabilized organic matter (vermicompost) and tropical soils in the sorption of naphthalene, anthracene and benzo[a]pyrene. The results obtained for the three compounds were extrapolated for the priority polycyclic aromatic hydrocarbons (PAHs) pollutants according to Environmental Protection Agency (US EPA). To evaluate the sorption process, high performance liquid chromatography was employed and the data was fitted by Freundlich isotherms. The results suggest that the sorption effect generally increases with the number of benzene rings of the PAHs, and that the persistence of PAHs in the environment is possibly related to the number of benzene rings in the PAH molecule. In addition, the pH of the vermicompost can strongly affect the adsorption process in this matrix.     

The dissolution of benzene, toluene, m-xylene and naphthalene from a residually trapped non-aqueous phase liquid under mass transfer limited conditions

The results of dissolution experiments for benzene, toluene, m-xylene and naphthalene (BTXN) from a relatively insoluble oil phase (tridecane), residually trapped in a non-sorbing porous medium, are described. This mixture was chosen to simulate dissolution of soluble aromatic compounds from a petroleum hydrocarbon mixture, e.g., crude oil, for which a large fraction of the mixture is relatively insoluble. The experiments were carried out at a small source length to interstitial velocity ratio, L/v, so that dissolution would be mass transfer limited (MTL). When fitted to data for toluene, a multiregion mass transfer model was found to predict the experimental data satisfactorily for the other components without adjustment of the mass transfer rate parameters. These results indicate that the dissolution process can be generalized for various hydrophobic organic compounds present in a multicomponent non-aqueous phase liquid (NAPL) when mass transfer limitations are present. This also suggests that dissolution data obtained for one compound can be useful for predicting the dissolution histories for other compounds from petroleum hydrocarbon mixtures.