飞火和热辐射耦合作用点燃松针的实验研究

飞火颗粒点燃和火焰辐射引燃是森林-城镇交界域火灾两种主要引燃方式。已有很多研究关注单种引燃方式,但缺乏二者耦合作用下的引燃机理研究。实验研究了热颗粒与热辐射耦合作用下松针燃料床的点燃行为,分析了热颗粒尺寸、温度及辐射热通量对点燃特性的影响。实验结果表明:热颗粒和热辐射耦合作用的点燃危险性远远高于热颗粒或者热辐射单独作用下的点燃危险性。耦合作用时,点燃概率随颗粒尺寸、温度和辐射热通量增大而增大,热颗粒临界点燃温度以及临界辐射热通量均随热颗粒尺寸增大而降低;阴燃向明火转变的点燃时间随辐射热通量增大而降低,但与颗粒状态呈现出较为复杂的关系。     

烃类池火灾热辐射量化分析模型探讨

为澄清有关烃类池火灾热辐射量化分析模型选择中存在的问题,针对"池火计算方法"模型进行量纲分析和物理意义方面的讨论,提出该模型在概念使用、量纲关系、热释放速率的计算以及池火焰模化等方面存在的问题。系统阐述点源模型、Shokri-Beyler模型、Mudan模型等常用烃类池火灾热辐射通量分析模型的适用条件和应用范围。点源模型适用于被辐射目标物从池火焰接受的热辐射通量小于5 kW.m-2情况下池火灾热辐射的量化分析;Shokri-Beyler模型主要应用于估算被辐射目标物从池火焰接受的热辐射通量大于5 kW.m-2的情况;Mudan模型可用于估算无风或有风条件下被辐射目标物从池火焰接受的热辐射通量。     

The study of burning behaviors and quantitative risk assessment for 0# diesel oil pool fires

The liquid fuel safety issues on fuel storage, transportation and processing have gained most attention because of the high fire risk. In this paper, some 0# diesel pool fire experiments with different diameters (0.2–1 m) were conducted with initial fuel thicknesses of 2 cm and 4 cm, respectively, to obtain liquid fuel combustion characteristics. Some key parameters including mass burning rate, flame height and the flame radiative heat flux, associated with fire risk, were investigated and determined. Subsequently, a detail quantitative risk assessment framework for 0# diesel pool fire is proposed based on the 0# diesel burning characteristics. In the framework, the probability of personal dead and the facility failure are calculated by the vulnerability models, respectively. In the end, 10 special tank fire scenarios were selected to show the whole risk calculation process. The tank diameter and the distance to pool fires were paid more attention in the cases. The safety distances in the cases are provided for the persons and nearby facilities, respectively. The paper enriches the basic experimental data and the provided framework is useful to the management of 0# diesel tank areas.     

Configuration predictions of large liquefied petroleum gas (LPG) pool fires using CFD method

Liquefied petroleum gas (LPG) has potential pool fire risks due to its flammability. The configuration of pool fires plays a significant role when applying the solid flame model or point source model to assess the risks from heat radiation. However, no existing correlations can precisely predict the configuration of large LPG (100% propane) pool fires. To enhance the fundamental understanding on how pool diameter and wind velocity can influence the configuration of large LPG pool fires, an experimentally validated Computational Fluid Dynamics (CFD) model is employed to simulate fires using different burning rate models. Fire temperature profiles, flame heights, and flame tilts predicted by the CFD model were compared with empirical models and experimental data. Accordingly, new correlations for flame height and flame tilt as functions of pool diameter D and wind velocity u_w have been developed. The comparisons demonstrate that the new correlations have the best overall accuracy in the prediction of flame height and tilt for large LPG pool fires under different conditions (10 m ≤ D ≤ 20 m, 0 ≤ u_w ≤ 3 m·s⁻¹).     

不同边沿高度油池火燃烧行为的实验和数值模拟研究

采用实验和FDS数值模拟相结合的方法,探讨了边沿高度对油池火燃烧特性的影响。在实验部分,研究了燃烧速率和表观火焰高度随边沿高度的变化趋势,并分别分析了各个阶段的热反馈机制。在实验获得不同尺度、边沿高度正庚烷油池火燃烧速率的前提下,建立相应尺度的不同边沿高度油池火的Fire Dynamics Simulator(FDS)计算模型以针对火焰高度进行了数值模拟研究,分析了实际火焰高度、火焰下探高度随边沿高度的变化趋势,并提出了相关的无量纲拟合式。     

Analytical modelling of hydrocarbon pool fires: Conservative evaluation of flame temperature and thermal power

As well known, risk is a combination of probability and consequences of an accident. In analyzing the consequence of accidental hydrocarbon fires and the potential for domino effects, the evaluation of the flame extent and temperature are of the utmost importance. Since the primary effects of pool fires are connected to thermal radiation and issues of interplant/tank spacing employees’ safety zones, firewall specifications are to be addressed on the basis of a proper consequence analysis. By means of real scale experimental tests it was verified that both the thermal power and the flame temperature, T_f, increase as the pool area increases, up to reach maximum values in connection with a “critical pool dimension”. Dealing with pool areas higher than the critical one, experimental results, performed by different researchers at different scales, show a decrease of T_f. An in-depth analysis of the different concurring phenomena connected to a pool fire development allowed identifying the limiting step controlling the flame temperature. In fact, the trend of T_f is mainly determined by the increasing difficulty of oxygen diffusion within the internal bulk of gaseous hydrocarbons. In this article, we propose a novel pool fire modelling approach based on the simplified physical phenomena occurring in a circular turbulent diffusion fire and suitable to provide a theoretical insight into the above-mentioned experimental trends and to obtain the maximum values of the flame temperature and of the thermal power.The geometry of the pool is dictated by the surroundings (i.e., diking) and the analytical models here presented were successfully applied to the common situation of circular pools.However, it must be remarked that the developed model, matching fairly well experimental data for different hydrocarbons, can be applied in modelling similar scenarios characterized by different geometric or environmental conditions (e.g. road and rail tunnel fires).     

An experimental and modeling study of continuous liquid fuel spill fires on water

The spread of burning fuel spilled from oil product containers during offshore storage and transportation may cause large damage and trigger further accidents. Some analytical models already exist to predict the spread and burning behavior of liquid fuel spill fires, however, few experimental studies have been conducted to verify the model results. In this paper, continuous n-heptane spill fire experiments were conducted in a rectangular trench covered with water. The burning area, fuel spread rate, and thermal flux with different discharge flow rates and ignition delay times were investigated by both experimental and modeling means. The spill fire burning area, with 5 typical phases during burning, has a quasi-steady value which is directly proportional to the discharge rate but irrelevant to the ignition delay times. The steady burning rate, as the ratio of discharge rate over burning area, was estimated. A spread model was modified to simulate the spread of continuous liquid fuel spill fires in a one-dimensional channel, based on the balance between gravity and viscous forces. A cuboid solid flame model was used to compute the thermal flux from spill fires. The burning fuel spread and the heat flux calculated by the models agree with the experimental results.     

Numerical simulation of small-scale pool fires of LNG

Liquefied natural gas (LNG) has been largely indicated as a promising alternative solution for the transportation and storage of natural gas. In the case of accidental release on the ground, a pool fire scenario may occur. Despite the relevance of this accident, due to its likelihood and potential to trigger domino effects, accurate analyses addressing the characterization of pool fires of LNG are still missing.In this work, the fire dynamic simulator (FDS) has been adopted for the evaluation of the effects of the released amount of fuel and its composition (methane, ethane, and propane), on the thermal and chemical properties of small-scale LNG pool fire. More specifically, the heat release rate, the burning rate, the flame height, and thermal radiation, at different initial conditions, have been evaluated for pool having diameter smaller than 10 m. Safety distances have been calculated for all the investigated conditions, as well.Results have also been compared with data and correlations retrieved from the current literature. The equation of Thomas seems to work properly for the definition of the height over diameter ratio of the LNG pool fire for all the mixture and the investigated diameters.The addition of ethane and propane significantly affects the obtained results, especially in terms of radiative thermal radiation peaks, thus indicating the inadequacy of the commonly adopted assumption of pure methane as single, surrogate species for the LNG mixture.     

基于三维图像分析的浮力扩散火焰几何与辐射特性研究

火焰几何特性和辐射特性是刻画火灾规模及其危害的重要参量。利用三维火焰重构技术,获取了丙烷浮力扩散火焰的火焰高度、表面积、体积和火焰面元视角系数的变化规律。结果表明,三维重构的火焰能够表征真实火焰形态的动态变化。平均火焰表面积和体积均可较好地拟合为热释放速率的幂函数,火焰表面积热释放速率随火焰热释放速率的增加趋于常数。平均火焰高度、表面积和体积与火焰外部平均辐射热流之间具有较好的幂函数关系,且拟合指数随着与火源距离的增大而减小。此外,将点源、圆柱辐射模型和火焰面元积分方法得到的辐射计算值与辐射测量值进行比较,发现火焰面元积分方法能够更好地预测火焰外围的瞬时和平均辐射热流分布。     

庚烷池火多火源燃烧特性的实验研究

多火源燃烧是森林火灾和城市群发性火灾中重要而又特殊的火灾现象,相关研究很少。通过恒定控制液面高度的实验系统,对直径0.1m、0.2m和0.4m的庚烷池火在单个火源、两火源燃烧和三火源线性排列时的火焰高度、火焰体积和燃烧速率等特性进行了实验研究。研究发现,三火源燃烧时中间火源的火焰高度、火焰体积和燃烧速率明显高于两火源燃烧和单火源燃烧,三火源燃烧时边上火源与两火源的燃烧状况难以区分。这些燃烧特性随着火源间距的减小,呈现增大趋势。热量反馈增强和空气卷吸受限这两种火源相互作用机制相互耦合,且随着火源间距的减小而增强,在S/D（S为火源间距,D为油池直径）为2～4时,两种机制强烈竞争,在其他参数范围内热量反馈增强效应占主导作用。研究还发现火焰体积与热释放速率有较好的线性相关关系,单位火焰体积的热释放速率约为1614kW/m3。     

CFD simulation of pool fires situated at differing elevation

When two or more pool fires happen to burn so close to each other that they interact, they are termed ‘multiple pool fires’ (MPF). Past accident analysis reveals that MPFs occur quite frequently in chemical process industries. Controlled experiments done so far to study MPFs have indicated that MPFs lead to increase in the fuel burning rate, flame height and heat release rate (HRR) but the nature and the extent of the impacts of different factors on these manifestations is as yet poorly understood. In this context computational fluid dynamics (CFD) appears to be a tool which can enable more detailed and realistic simulation of MPFs than other possible approaches, especially due to its ability to closely approximate the underlying physical phenomena. In tank farms there are situations where different storage tanks are placed at different elevations yet close to each other. If such tanks happen to catch fire, the resulting fires may influence each other in a manner that may be a function of the difference in the tanks’ elevation. However no CFD study has been carried out which addresses this type of situation. Hence an attempt has been made to employ CFD to study MPFs involving two pools with fuel surfaces are at different elevations. Results reveal that good correlation is possible between the experimental findings and the CFD simulations.     

LNG池火热辐射模型及安全距离影响因素研究

重点对LNG池火热辐射模型,模型应用方式,以及热辐射安全距离的影响因素做了详细研究,给出池火热辐射模型采用及安全距离计算的方法。对常用的热辐射计算模型(点源模型、LNGFire3和PoFM ISE模型)加以介绍,并对3种模型做了对比研究。PoFM ISE模型充分考虑大池火直径时不完全燃烧的因素以及风速对火焰高度的影响,建议当风速大于1.5 m/s,池火直径大于20 m时采用。同时,进一步研究影响LNG池火热辐射安全距离的各种因素,包括池火直径、风速、环境温度和湿度,从而得出不同条件下池火热辐射安全距离的要求。     

An experimental study on the burning rate of a continuously released n-heptane spill fire on an open water surface

Spill fires are common during oil product storage and transportation after a loss of containment. Since the burning fuel is moving and the fuel depth is quite shallow, the burning rate in a spill fire is different from that of a pool fire with a static burning zone. Unlike pool fires, which have been studied for decades and have well-established correlations for burning rate, research on spill fires is inadequate. In this paper, continuously released n-heptane spill fire experiments were conducted on open water surfaces with varying fuel discharge rates. The pool diameters were measured, and the spill fire burning rates were estimated based on a dynamic balance between fuel supply and combustion. The burning rates in n-heptane pool fires from the literature were reviewed and compared with the estimated burning rates in spill fires of the same dimension. The spill fire burning rate was found to be close to that in a pool fire during the initial burning phase but lower than that in a bulk burning pool fire and that in a “fuel-level-controlled” pool fire. The distinction between the burning rates of spill fires and pool fires is explained by the heat balance analysis of the fuel layer. A model for the spill fire burning rate was proposed accordingly. The results calculated with the presented model are closer to the measured data than those calculated with pool fire models.     

Computational fluid dynamics (CFD) study of heat radiation from large liquefied petroleum gas (LPG) pool fires

Liquefied petroleum gas (LPG) is flammable and has risks of pool fires during its transportation, storage, and applications. The heat radiation by LPG pool fires poses hazards to individuals nearby and can lead to potential failures of ambient facilities. Due to the high costs and invasive nature of experiments for investigating large-scale pool fires, computational fluid dynamics (CFD) is employed in this study as the cost-effective and noninvasive method to simulate the process and analyze the characteristics of large hydrocarbon pool fires. Specifically, an experimentally validated 3-D CFD model has been built to simulate surface emissive power (SEP) and incident radiation of large-scale LPG pool fires with three different diameters and wind speeds. Steady-state simulations with P1 radiation and probability density function (PDF) combustion models were employed to obtain reliable data after the optimizations based on the comparisons with experimental data and empirical models. The comparison with benchmark experimental data demonstrates that the CFD model employed in this study can accurately predict the incident radiation of large LPG pool fires. A new SEP correlation is also proposed, which is specifically for LPG pool fires with a diameter between 10 m and 20 m. Additionally, the safe separation distances between LPG facilities and surrounded objects have been estimated based on the CFD simulation results. The high-resolution CFD model for large LPG pool fires in this work provides noninvasive and direct quantitative evidence to enhance the fundamental understanding on the safety of large LPG pool fires and can assist regulatory agencies in refining the safety limits in the cost-effective and time-saving manners.     

龙柏树冠火对相邻建筑的辐射特性研究

我国城市绿化覆盖率快速增长,带来了植被与建筑混合区域的火灾隐患。以常见城市绿化树种龙柏为研究对象,开展了单树树冠火对其相邻建筑的热辐射规律实验研究,测量了不同间距情况下建筑物一层和二层窗户位置的辐射热流密度,并在圆柱火焰模型的基础上,将圆柱火焰分为下层的稳定火焰区和上层的间歇火焰区,提出了分层圆柱火焰模型。结果表明,分层圆柱火焰模型可以准确描述树冠火辐射热流密度最大值随高度和距离的增加而递减的变化趋势。单一圆柱火焰模型理论的结果表明竖直方向上热流密度随高度变化不大,未能准确描述辐射热流密度竖向变化规律;分层圆柱火焰模型计算的辐射热流密度比单一圆柱火焰模型更符合实验结果,能更好地预测安全距离。     

比较FDS和FLUENT在池火灾模拟中的应用

热辐射是池火灾燃烧的主要危害之一,可能导致人员伤亡或设备设施损坏。油罐火灾是典型的池火灾。本文通过对无风情况下油罐火灾火焰形状进行理论模型分析,建立了各自的物理模型和几何模型。应用计算流体动力学软件Fluent和火灾动力学模拟软件FDS,对无风情况下池火灾对周围大气环境的热辐射强度进行模拟,得到了火焰周围入射热流密度分布图,运用软件Statistica拟合得出热辐射强度与距离火焰中心的水平距离的对应关系,分别计算出轻伤半径区域下的最小安全距离。数值模型模拟结果与池火灾经验模型进行比较,发现FDS辐射强度结果与经验模型结果吻合较好。分析了利用这两种模型模拟油罐火灾各自的优点和缺点,最后提出了运用FDS软件模型模拟油罐火灾时的优势。     

Laboratory scale analysis of the influence of different heat transfer mechanisms on liquid nitrogen vaporization rate

The prediction of the potential hazards associated to accidental liquefied natural gas (LNG) spills has motivated a number of different studies including experimental and numerical approaches. Most of these studies focus on dispersion predictions, however there is limited information regarding source term of it: liquid spill and vaporization. There is a need of further improvements on the understanding of these phenomena and the quantification of the most important parameters that can affect them.The vaporization of cryogenic liquids is governed by the heat transfer phenomena including conduction, convection and thermal radiation mechanisms. The present work investigates the contribution of each of these heat transfer modes to the vaporization rate of cryogenic liquid nitrogen (LN₂) contained in a Dewar flask using well controlled and instrumented laboratory scale experiments. LN₂ vaporization rate was measured with individually controllable contributions from convective (generated by an electric fan) and thermal radiative (generated by light bulb) heat transfer in the presence of a baseline conductive heat transfer rate.In both cases of convection and radiation analysis the experimental study showed that they can play a significant role in the vaporization rate of LN₂. It was observed that the radiative heat absorbed by the LN₂ during the vaporization experiment represents only 50%–65% of the incident radiation that would reach the LN₂ pool surface if no vapour was present. Convective heat transfer generated by the fan was shown to have had the most significant contribution to the total heat transfer. As expected, this contribution was significantly higher than the one from bulb radiation. The experimental data also showed that the liquid level in the Dewar play a key role in the resulting amount of convective heat transfer. This could be attributed to the fact that lower liquid level the side walls of the Dewar were high enough to hold a layer of vapour and limit air motion directly above the liquid surface, thus limiting the heat transfer by convection.     

Modeling of a cryogenic liquid pool boiling by CFD simulation

A boiling model is developed by Computational Fluid Dynamics (CFD) code to calculate the source term of a cryogenic liquid spill. The model includes the effect of the changing ground temperature on the vaporization rate of the cryogenic liquid. Simulations are performed for liquid nitrogen. The model can describe different boiling regimes (film, transition and nucleate). The heat flux calculated for each boiling regimes are compared to the experimental data from literature. The developed numerical model seems to have a good ability to predict the heat flux for the film boiling stage. Model development is still necessary to improve the prediction of the nucleate boiling regime. Overall, the approach shows very promising results to model the complex physical phenomena involved in in the vaporization of cryogenic liquid pool spilled on ground.     

烃类流体火灾伤害破坏作用定量分析

对烃类流体火灾的伤害破坏作用进行正确的定量分析是开展重大消防目标火灾风险评估工作的基础。针对烃类流体火灾伤害破坏作用定量分析中存在的问题,系统论述烃类流体火灾伤害破坏作用的定量分析方法,分析并讨论火球、池火、喷射火和蒸气云火灾等不同火灾形式的热辐射通量计算模型及其前提条件,对不同热辐射伤害破坏作用准则及伤害概率模型的适用条件和模型基础进行了论述。     

室内火灾幅射换热的工程计算

本文用辐射换热的方法研究了可燃物在室内火灾环境下的表面热流密度随位置变化的分布,以及加入其它可燃物后所带来的变化.利用这种方法,有助于深刻了解室内火灾中的辐射过程.