Effect of concentration and ignition position on vented methane–air explosions

Experiments were conducted in a 1 m³ vessel with a top vent to investigate the effect of methane concentration and ignition position on pressure buildup and flame behavior. Three pressure peaks (p₁, p₂, and P_ext) and two types of pressure oscillations (Helmholtz and acoustic oscillations) were observed. The rupture of vent cover results in p₁ that is insensitive to methane concentration and ignition position. Owing to the interaction between acoustic wave and the flame, p₂ forms in the central and top ignition explosions when the methane–air mixture is near–stoichiometric. When the methane–air mixture is centrally ignited, p₂ first increases and then decreases with an increase in the methane concentration. The external explosion-induced P_ext is observed only in the bottom ignition explosions with an amplitude of several kilopascals. Under the current experimental conditions, flame–acoustic interaction leads to the most serious explosions in central ignition tests. Methane concentration and ignition position have little effect on the frequency of Helmholtz and acoustic oscillations; however, the Helmholtz oscillation lasts longer and first decreases and then increases as the methane concentration increases for top ignition cases. The ignition position significantly affects the Taylor instability of the flame front resulting from the Helmholtz oscillation.     

Venting of deflagrations: hydrocarbon–air and hydrogen–air systems

A set of 34 experiments on vented hydrocarbon–air and hydrogen–air deflagrations in unobstructed enclosures of volume up to 4000 m³ was processed with use of the advanced lumped parameter approach. Reasonable compliance between calculated pressure–time curves and experimental pressure traces is demonstrated for different explosion conditions, including high, moderate, low and extremely low reduced overpressures in enclosures of different shape (L_max:L_min up to 6:1) with different type and position of the ignition source relative to the vent, for near-stoichiometric air mixtures of acetone, methane, natural gas and propane, as well as for lean and stoichiometric hydrogen–air mixtures. New data were obtained on flame stretch for vented deflagrations.The fundamental Le Chatelier–Brown principle analog for vented deflagrations has been considered in detail and its universality has been confirmed. The importance of this principle for explosion safety engineering has been emphasized and proved by examples.A correlation for prediction of the deflagration–outflow interaction number, χ/μ, on enclosure scale, Bradley number and vent release pressure is suggested for unobstructed enclosures and a wide range of explosion conditions. Fractal theory has been employed to verify the universality of the dependence revealed of the deflagration–outflow interaction number on enclosure scale.In spite of differences between the thermodynamic and kinetic parameters of hydrocarbon–air and hydrogen–air systems, they both obey the same general regularities for vented deflagrations, including the Le Chatelier–Brown principle analog and the correlation for deflagration–outflow interaction number.     

Effects of cross-wise obstacle position on methane–air deflagration characteristics

A vented chamber, with internal dimensions of 150 mm × 150 mm × 500 mm, is constructed in which the premixed methane–air deflagration flame, propagating away from the ignition source, interacts with obstacles along its path. Three obstacle configurations with different cross-wise positions are investigated. The cross-wise obstacle positions are found to have significant effects on deflagration characteristics, such as flame structure, flame front location, flame speed, and overpressure transients. The rate of flame acceleration, as the flame passes over the last obstacle, is the highest at the configuration with three centrally located obstacles, whereas the lowest is observed at the configuration with three obstacles mounted on one side of the chamber. Compared with the side configuration, the magnitude of overpressure generated increases by approximately 80% and 165% for the central and staggered configurations, respectively. Furthermore, flame propagation speeds and generated overpressures for both the central and staggered configurations are greater, which should to be avoided to reduce the risk associated with turbulent premixed deflagrations in practical processes.     

Explosion behavior of hydrogen–methane/air mixtures

The effects of enriching natural gas with hydrogen on local flame extinction, combustion instabilities and power output have been widely studied for both stationary and mobile systems. On the contrary, the issues of explosion safety for hydrogen–methane mixtures are still under investigation.In this work, experimental tests were performed in a 5 L closed cylindrical vessel for explosions of hydrogen–methane mixtures in stoichiometric air. Different compositions of hydrogen–methane were tested (from pure methane to pure hydrogen) at varying initial pressures (1, 3 and 6 bar).Results have allowed the quantification of the combined effects of both mixture composition (i.e., hydrogen content in the fuel) and initial pressure on maximum pressure, maximum rate of pressure rise and burning velocity. The measured burning velocities were also correlated by means of a Le Chatelier’s Rule-like formula. Good predictions have been obtained (at any initial pressure), except for mixtures with hydrogen molar content in the fuel higher than 50%.     

Experimental investigation of hydrogen–air deflagrations and detonations in semi-confined flat layers

This paper presents results of an experimental investigation on the deflagration and deflagration-to-detonation transition (DDT) in an obstructed (blockage ratio BR = 50%), semi-confined flat layer filled with uniform hydrogen–air mixtures. The effect of mixture reactivity depending on flat layer thickness and its width is studied to evaluate the critical conditions for sonic flame propagation and the possibility for detonation onset. The experiments were performed in a transparent, rectangular channel with a length of 2.5 m. The flat layer thickness was varied from 0.06 to 0.24 m and the experiments were performed for different channel widths of 0.3, 0.6 and 0.9 m. The experimental results show flame velocity vs. hydrogen concentration for different thicknesses and widths of the semi-confined flat layer. Three different flame propagation regimes were observed: slow subsonic flame (M << 1), sonic deflagration (M ～ 1) and detonation (M >> 1). It is shown that flame acceleration (FA) to sonic speed is independent of the width of the flat layer. The critical expansion ratio for effective flame acceleration to sonic speed was found to be linearly dependent on the reciprocal layer thickness.     

Ignition of methane–air mixtures by laser heated small particles

Optical technologies have progressed rapidly in the past 15 years. One application of laser technology in underground coal mines currently under evaluation is the remote measurement of explosive methane gas. Federal regulations require that atmospheric monitoring systems used in gassy underground mines where permissible equipment is required shall be intrinsically safe. Mine Safety and Health Administration criteria for the evaluation and testing of intrinsically safe apparatus and associated apparatus contain no specific guidance for optoelectronic components such as diode lasers. The National Institute for Occupational Safety and Health is conducting a study to help provide a scientific basis for developing appropriate safety guidelines for optical equipment in underground coal mines. Results of experiments involving ignition of methane–air mixtures by collections of small heated particles of Pittsburgh seam coal and black iron oxide are reported. The inert but more strongly absorbing iron oxide targets consistently ignited methane–air mixtures at lower powers than the coal targets. Minimum observed igniting powers for laser energy delivered by 200, 400 and 800 μm core fiber optic cables and directed onto iron oxide targets in methane–air atmospheres were 0.6, 1.1, and 2.2 W, respectively. Comparisons with the results of other researchers are made. A thermal layer theoretical approach to describing the process is included as an appendix.     

Effects of obstacles and deposited coal dust on characteristics of premixed methane–air explosions in a long closed pipe

An experimental system including pressure transducer, electric spark ignition device, data acquisition and control unit was set up to investigate methane–air explosions in a horizontal pipe closed at both ends with or without the presence of obstacles and deposited coal dust. The experimental results show that explosion characteristics depended on the methane content, on the layout of obstacles, and on the deposited coal dust. Pressure fluctuation with a frequency of 150 Hz appeared in its crest when the methane content was close to the stoichiometric ratio (9.5% methane percentage by volume). The pressure rise rate increased locally when a single obstacle was mounted in the pipe, but it had little effect on the pressure peak. Repeated obstacles mounted in the pipe caused the pressure to rise sharply, and the mean maximum explosion overpressure increased with the increase of the obstacle’s number. The amplitude of pressure fluctuation was reduced when deposited coal dust was paved in the bottom of the pipe. However, when repeated obstacles were arranged inside, the maximum overpressures were higher with coal dust deposited than pure gas explosions.     

Experimental study on DDT for hydrogen–methane–air mixtures in tube with obstacles

An experimental study of flame propagation, acceleration and transition to detonation in stoichiometric hydrogen–methane–air mixtures in 6 m long tube filled with obstacles located at different configurations was performed. The initial conditions of the hydrogen–methane–air mixtures were 1 atm and 293 K. Four different cases of obstacle blockage ratio (BR) 0.7, 0.6, 0.5 and 0.4 and three cases of obstacle spacing were used. The wave propagation was monitored by piezoelectric pressure transducers PCB. Pressure transducers were located at different positions along the channel to collect data concerning DDT and detonation development. Tested mixtures were ignited by a weak electric spark at one end of the tube. Detonation cell sizes were measured using smoked foil technique and analyzed with Matlab image processing toolbox. As a result of the experiments the deflagration and detonation regimes and velocities of flame propagation in the obstructed tube were determined.     

Numerical simulation of premixed methane–air deflagration in a semi-confined obstructed chamber

In this paper, large eddy simulation coupled with a turbulent flame speed cloure (TFC) subgrid combustion model has been utilized to simulate premixed methane–air deflagration in a semi-confined chamber with three obstacles mounted inside.The computational results are in good agreement with published experimental data, including flame structures, pressure time history and flame speed. The attention is focused on the flame flow field interaction, pressure dynamics, as well as the mechanism of obstacle-induced deflagration. It is found that there is a positive feedback mechanism established between the flame propagation and the flow field. The pressure time history can be divided into four stages and the pseudo-combustion concept is proposed to explain the pressure oscillation phenomenon. The obstacle-induction mechanism includes direct effect and indirect effect, but do not always occur at the same time.     

Effect of ignition position on vented hydrogen–air deflagration in a 1 m3 vessel

This study investigates the effect of the ignition position on vented hydrogen-air deflagration in a 1 m³ vessel and evaluates the performance of the commercial computational fluid dynamics (CFD) code FLACS in simulating the vented explosion of hydrogen-air mixtures. First, the differences in the measured pressure-time histories for various ignition locations are presented, and the mechanisms responsible for the generation of different pressure peaks are explained, along with the flame behavior. Secondly, the CFD software FLACS is assessed against the experimental data. The characteristic phenomena of vented explosion are observed for hydrogen-air mixtures ignited at different ignition positions, such as Helmholtz oscillation for front ignition, the interaction between external explosion and combustion inside the vessel for central ignition, and the wall effect for back-wall ignition. Flame-acoustic interaction are observed in all cases, particularly in those of front ignition and very lean hydrogen-air mixtures. The predicted flame behavior agree well with the experimental data in general while the simulated maximum overpressures are larger than the experimental values by a factor of 1.5–2, which is conservative then would lead to a safe design of explosion panels for instance. Not only the flame development during the deflagration was well-simulated for the different ignition locations, but also the correspondence between the pressure transients and flame behavior was also accurately calculated. The comparison of the predicted results with the experimental data shows the performance of FLACS to model vented mixtures of hydrogen with air ignited in a lab scale vessel. However, the experimental scale is often smaller than that used in practical scenarios, such as hydrogen refueling installations. Thus, future large-scale experiments are necessary to assess the performance of FLACS in practical use.     

Nonlinear distribution characteristics of flame regions from methane–air explosions in coal tunnels

High temperature flame fronts generated in methane–air explosions are one of the major hazards in underground coal mines. However, the distribution laws of the flame region in explosions of this type and the factors influencing such explosions have rarely been studied. In this work, the commercial software package AutoReaGas, a finite-volume computational code for fluid dynamics suitable for gas explosion and blast problems, was used to carry out numerical simulations of a series of methane–air explosion processes for various initial premixed methane–air regions and cross-sectional areas in full-scale coal tunnels. Based on the simulated results and related experiments, the mechanism of flame propagation beyond the initial premixed methane–air region and the main factors influencing the flame region were analyzed. The precursor shock wave and turbulence disturb the initial unburned methane–air mixture and the pure air in front of the flame. The pure air and unburned mixture subsequently move backward along the axial direction and mix partially. The enlargement of the region containing methane induces that the range of the methane–air flame greatly exceeds the initial premixed methane–air region. The flame speed beyond the initial region is nonzero but appreciably lower than that in the original premixed methane–air region. The length of the initial premixed methane–air region has substantial influence on the size of the flame region, with the latter increasing exponentially as the former increases. For realistic coal tunnels, the cross-sectional tunnel area is not an important influencing factor in the flame region. These conclusions provide a theoretical framework in which to analyze accident causes and effectively mitigate loss arising from the repetition of similar accidents.     

Effects of initial temperature and pressure on explosion characteristics of propane–diluent–air mixtures

The explosion characteristics of propane–diluent–air mixtures under various temperatures and pressures were investigated using a 20-L apparatus. The explosion limits of propane diluted with nitrogen or carbon dioxide were measured at high temperatures from 25 to 120 °C. The results showed that the upper explosion limit (UEL) increased, and the lower explosion limit (LEL) decreased with the rising temperature. The explosion limits of propane diluted with nitrogen or carbon dioxide were also measured at high pressures from 0.10 to 0.16 MPa. The results showed that the UEL increased, and the LEL almost remainedunchanged along with increased pressure. Under the same initial operating conditions, the concentration of nitrogen required to reach the minimum inerting concentration (MIC) point was higher than the concentration of carbon dioxide. Finally, the study investigated the limiting oxygen concentration (LOC) of propane under various initial temperatures, initial pressures, and inert gases. The LOC of propane decreased approximately linearly with increased temperature or pressure, and the LOC of propane dilution with carbon dioxide was greater than dilution with nitrogen from 25 to 120 °C or from 0.10 to 0.16 MPa, which indicated that the dilution effect of carbon dioxide was better than that of nitrogen.     

Large eddy simulation of methane–air deflagration in an obstructed chamber using different combustion models

In this paper, simulations of methane–air deflagration inside a semi-confined chamber with three solid obstacles have been carried out with large eddy simulation (LES) technique. Three sub-grid scale (SGS) combustion models, including power-law flame wrinkling model by Charlette et al., turbulent flame speed closure (TFC) model, and eddy dissipation model (EDM), are applied. All numerical results have been compared to literature experimental data. It is found that the power-law flame wrinkling model by Charlette et al. is able to better predict the generated pressure and other flame features, such as flame structure, position, speed and acceleration against measured data. Based on the power-law flame wrinkling model, the flame–vortex interaction during the deflagration progress is also investigated. The results obtained have demonstrated that higher turbulence levels, induced by obstacles, wrinkle the flame and then increase its surface area, the burning rates and the flame speed.     

The effect of orifice plates with different shapes on explosion propagation of premixed methane–air in a semi-confined pipeline

The effect of internal shape of obstacles on the deflagration of premixed methane–air (concentration of 10%) was experimentally investigated in a semi-confined steel pipeline (with a square cross section size of 80 mm × 80 mm and 4 m long). The obstacles used in this study were circular, square, triangular and gear-shaped (4-teeth, 6-teeth and 8-teeth) orifice plates with a blockage ratio of 75%, and the perimeter of the orifice was regarded as a criterion for determining the sharpness of the orifice plate. The overpressure history, flame intensity histories, flame front propagation speed, maximum flame intensity and peak explosion overpressure were analyzed. The explosion in the pipeline can be divided into two stages: initial explosion and secondary explosion. The secondary explosion is caused by recoiled flame. The perimeter is positively related to the intensity of the recoiled flame and the ability of orifice plate to suppress the explosion propagation. In addition, the increase in the perimeter will cause the acceleration of the flame passing through the orifice plate, while after the perimeter of the orifice reaches a certain value, the effect of the increase in perimeter on explosion excitation becomes no obvious. The overpressure (static pressure) downstream of the orifice plate is the result of the combined effect of explosion intensity and turbulence. The increase in perimeter leads to the increase in turbulence downstream of the orifice plate which in turn causes more explosion pressure to be converted into dynamic pressure.     

Recognition primed decision making and the organisational response to accidents: Überlingen and the challenges of safety improvement in European air traffic management

The pioneering work of Rasmussen, Reason and their colleagues has greatly improved our understanding of the longer term causes of adverse events in safety-critical systems. Far less attention has been paid to the organisational decision making that characterises the response to accidents and incidents. Therefore, this paper examines the interventions by national and international agencies after one of the most serious accidents in European Air Traffic Management. Insights from Naturalistic Decision Making (NDM) and Recognition Primed Decision Making (RPDM) are used to explain the complex ways in which technical, organisational and political constraints shape and support the decisions and actions taken by different agencies. These constraints affect national and international safety organisations in the aftermath of major accidents. In particular, this paper uses NDM and RPDM to assess the interventions made by Swiss Federal agencies and by the Air Navigation Service provider (ANSP) following the Überlingen mid-air collision in July 1st 2002. Later sections show that there are strong similarities between the technical, organisational and political constraints that informed their decisions and the factors that directed the work of the European Organisation for the Safety of Air Navigation (EUROCONTROL). Some of EUROCONTROL’s safety responsibilities (i.e. the safety regulation elements) will in the future pass to the European Aviation Safety Agency (EASA), an Agency of the European Commission. This transfer of responsibilities has the potential to increase the powers available to ensure the implementation of recommendations following future accidents. At the same time there is a danger that key aspects of existing safety and regulatory activities may be overlooked. It is critical, therefore, that the same level of audit and monitoring be conducted on the European agencies during the transition period as is proposed for service providers and national regulatory agencies. It is important to ensure that these changes do not inadvertently lead to the loss of insights from previous adverse events.     

Comparison studies of adsorption properties of MgO nanoparticles and ZnO–MgO nanocomposites for linezolid antibiotic removal from aqueous solution using response surface methodology

In this investigation, the adsorption measure of linezolid antibiotic onto MgO nanoparticles and ZnO–MgO nanocomposites were performed. The adsorbents were characterized by different techniques such as XRD, SEM, TEM and BET. The parameters influence such as the pH, adsorbent dosage and temperature was tested and evaluated by Box–Behnken Design combined with response surface methodology. Performing adsorption tests at optimal conditions set as 0.5 g L⁻¹ of adsorbent, pH 10 and 308 K make admit to obtain high adsorption turnover (123.45 and 140.28 mg g⁻¹ for MgO nanoparticles and ZnO–MgO nanocomposites, respectively). A good compromise between predicted and experimental data in this research was observed. The experimental equilibrium data fitting to Langmuir, Freundlich, Tempkin and Dubinin–Radushkevich models indicate that the Langmuir model is a best model for evaluation of adsorption behavior. Kinetic evaluation of experimental data indicated that the adsorption operations followed well pseudo-second-order models. The adsorption capacity of ZnO–MgO nanocomposites is higher than MgO nanoparticles that because of the ZnO–MgO nanocomposites have high specific surface area.     

Preparation of Co–MgO mixed oxide nanocatalysts for low temperature CO oxidation: Optimization of preparation conditions

In this study, a series of Co–MgO mixed oxides (30 wt.% Co) were prepared by co-precipitation method and employed as catalyst in low temperature CO oxidation reaction. The preparation conditions were optimized by the Taguchi method of experimental design to synthesize a sample with high catalytic performance toward CO oxidation reaction. The effects of four variables, pH of solution, aging temperature, aging time and molarity of precursor solution at three levels were investigated. The optimized sample was characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), temperature programmed desorption of oxygen (O₂-TPD), N₂ adsorption/desorption, thermal gravimetric and differential thermal analysis (TGA/DTA), and transmission electron microscopy (TEM) techniques. The results revealed that the optimized sample showed a mesoporous structure with a narrow pore size distribution centered in the range of 7–17 nm and particle size about 5.5 nm. It was found that the molarity of solution and aging time had the most influence on the CO conversion, respectively. The catalytic results showed that the highest CO conversion obtained from samples synthesized by Taguchi orthogonal array was about 90% at 200 °C, while the CO conversion for optimized sample was 95%. In addition, the effect of operational conditions was studied over optimized sample.     

Understanding the context of alcohol impaired driving for fatal crash–involved drivers: A descriptive case analysis

Objective: The objective of this study was to understand the social context and circumstances surrounding alcohol-impaired driving prior to fatal crash involvement for drivers with an illegal blood alcohol concentration (BAC ≥ 0.05 g/100 ml or 0.00 g/100 ml for restricted license holders).

Methods: Coroners' case reports investigating fatal crashes in South Australia over a 3-year period (2008–2010) were examined. The personal and crash characteristics of drivers with an illegal BAC were compared with those who had a legal BAC. For each driver with an illegal BAC, information was recorded including characteristics of last trip, location and social context of alcohol consumption, quantity and type of alcohol consumed, BAC level, presence of drugs, perceived alcohol intoxication, and alcohol dependence. Official traffic offense records were also obtained.

Results: Of the 284 fatal crashes included in the study, 34% (n = 95) involved a driver or rider with an illegal BAC. Prior to the crash, alcohol was most frequently consumed by drivers in rural areas, within private homes, and was part of normal social activities. Drivers recorded a high level of alcohol impairment, with a mean BAC of 0.173 g/100 ml and a level of alcohol dependence that was above the Australian national average (7.4 vs. 3.9%). In addition, 23% of drivers were known to be experiencing psychological stress at the time of the crash. The results also confirm that drink driving recidivism continues to be a significant problem, with 44% of drivers recording at least one prior alcohol driving offense.

Conclusions: Alcohol-impaired driving continues to be a leading cause of fatal crashes. The popularity of drinking at home, particularly in rural areas, has implications for police enforcement strategies and suggests that drink driving interventions that focus on community values and looking after friends might be beneficial. Importantly, the study highlights the need for a broader holistic approach to reduce the high levels of alcohol consumption and alcohol dependence underlying drink driving behavior.