Copper recycling and scrap availability

According to existing estimates, available old copper scrap has more than tripled over the past 40 years. Secondary production (that is, copper produced from recycling old scrap), however, has only doubled. Indeed, over the past 10 years, while copper consumption and primary production have continued to expand briskly, while available old scrap has increased by over 35%, secondary production has actually stagnated.For a world concerned with sustainable development and the quality of the earth's environment, this performance is disappointing and in need of explanation. Other things being equal, one would expect the amount of recycling to increase with the availability of scrap, as many econometric models of the world copper market developed over the past several decades explicitly assume.The key to understanding sluggish growth in secondary production, this paper argues, is distinguishing carefully between (1) the flow of old scrap that arrives each year from products reaching the end of their useful lives during the year and (2) the available stock of old scrap that was not recycled during earlier years presumably because it was too costly to do so. Using an econometric model, the paper shows that old scrap stocks, which have contributed most of the increase in available old copper scrap over the years, have a very modest impact on secondary production. Old scrap flows have a much greater effect, but they account for only about 4% of the available old scrap for any given year.     

Paper recycling and social policy

This paper examines the problems and operation of waste paper recycling in the UK. Long- and short-term forecasts for demand are developed, showing demand strongly correlated with Gross Domestic Product. These are used to simulate a buffer stock scheme and establish costs for operating such a scheme. The authors conclude, given that the only large source of waste paper not fully exploited is the householder, then grants for developing waste upgrading technologies are likely to be more effective than buffer stock schemes.     

Marginal recycling: place and informal recycling in St. John's,Newfoundland

Informal recycling networks are systems through which impoverished populations earn money and residents recycle waste which might otherwise go into a landfill. These networks, in which people voluntarily self-organise to collect recyclables, occur throughout the world. This article discusses results of an exploratory, qualitative study of one such network in St. John's, Newfoundland and Labrador which identifies motivational characteristics of the network and their implications for public policy. Through close attention to particularities of place, the research identified community interaction and community inclusion as two of the most active motivating factors within the studied network. The findings suggest public recycling programmes can increase public participation through greater attention to place-based motivational factors. Such participation could contribute to increased sustainability and reach of recycling programmes.     

Financing electronic waste recycling Californian households' willingness to pay advanced recycling fees

The growth of electronic waste (e-waste) is of increasing concern because of its toxic content and low recycling rates. The e-waste recycling infrastructure needs to be developed, yet little is known about people's willingness to fund its expansion. This paper examines this issue based on a 2004 mail survey of California households. Using an ordered logit model, we find that age, income, beliefs about government and business roles, proximity to existing recycling facilities, community density, education, and environmental attitudes are significant factors for explaining people's willingness to pay an advanced recycling fee (ARF) for electronics. Most respondents are willing to support a 1% ARF. Our results suggest that policymakers should target middle-aged and older adults, improve programs in communities with existing recycling centers or in rural communities, and consider public-private partnerships for e-waste recycling programs.     

Voluntary recycling despite disincentives

This paper assesses the determinants of take-up of a voluntary waste separation scheme, in a scenario where residents sorted, stored and paid for collection of recycling waste even though mixed waste was collected at the kerbside more conveniently, free of charge and without any quantity limits. Uptake of the scheme was positive, persistent and diverse across localities, offering an opportunity to assess the factors determining voluntary participation in the presence of disincentives. We employ a unique panel data-set (n = 4,644) from Malta, including data on recyclable waste kilogrammes collected over the first 86 weeks of the scheme's operation. Drawing on insights from environmental economics and psychology, a model is empirically estimated. Results indicate that uptake is suppressed by the initial constraints households may face and stimulated by collection frequency. Political vote is an important determinant of participation and this interacts with scheme promotion to create diverse uptake rates.     

Cathode ray tube recycling

Lead and polybrominated flame retardants are the two hazardous materials that can be found in electronic appliances. Particularly, cathode ray tubes (CRT) contain leaded glasses. In a computer monitor, over 98% of the lead is in the CRT. This material is generally not accepted for reuse as a component; only those from televisions can be reused. However, this currently represents only a very small market. Envirocycle (a US company) has developed a process to recycle all glasses contained in CRTs; this process includes cleaning and sorting glass. The product obtained is used for the manufacture of new CRT glass. Some industries have used pulverized glass from CRTs in smelting processes as slagging material instead of sand or slag. In this paper, some environmental issues related to the recycling of computers and television sets, and CRTs from computers are presented and discussed. Different processes used to recycle CRTs are described along with an economic analysis.     

Status of refuse recycling

The Second International Recycling Conference provided a follow-up to the 1975 Conversion of Refuse to Energy Conference and the 1976 Materials and Energy from Refuse Conference. The four year timespan provided a valuable opportunity to assess developments in the many, varied and often enthusiastic proposals for material and energy recovery put forward on those occasions. The organizers presented a comprehensive programme of 229 papers, with a concurrent wide-ranging exhibition of pertinent equipment and systems suppliers. Second International Recycling Conference, Berlin, 1–3 October 1979. Many of the views expressed were reaffirmed at an EEC Congress a few weeks later. EEC Congress on Packaging Waste Recycling, Utrecht, the Netherlands, 23–24 October 1979.     

A rationale for recycling

The decision as to whether to recycle discarded objects or not has traditionally been made on a simple financial basis. However, over the last few years a popular movement has sprung up which regards recycling as a good in itself, and this movement finds itself at odds with the present financial basis for recycling. In this paper a rationale for recycling is worked out in an attempt to resolve this conflict. It is concluded that the normal market signals do not provide a proper basis for recycling decisions and that this market failure must be corrected by government intervention. However, this intervention should not take the form of uncritical support for recycling. Rather the societal objectives of individual recycling proposals should be identified and the proposal should then be evaluated in terms of whether it would achieve these objectives more effectively than some alternative action.     

Impediments to refractory recycling decision-making

This paper focuses on organizational impediments to the successful implementation of industrial recycling programs. Even if a technologically viable and mutually beneficial solution were to exist, there are a number of organizational impediments that make it unlikely to succeed unless the benefits are very large and apparent. These impediments stem from the difficulty in identifying potential partners and involving the appropriate individuals within the firms that understand the technical requirements, value the strategic benefits and are receptive towards establishing the industrial recycling relationship. This dilemma applies to many industrial recycling opportunities, but solutions do exist. One way to avoid some of these obstacles is to use a middleman, or broker, who can play several crucial roles to establish the relationship. This paper describes the impediments and key broker roles, and provides a case study dealing with refractory recycling. It provides a case study that documents a recycling relationship between an aluminum-manufacturing firm that produces a large volume of spent refractories and a regional portland cement producer that is using the spent refractories as an alternative raw material source. This paper also provides a thorough literature search in the area of refractory recycling. Finally, the case study provides an opportunity for analysis and reflection on the implications of these findings to industrial firms, industrial societies and governmental agencies that seek to encourage successful recycling operations.     

Botswana's environmental policy on recycling

Recycling operations have become one of the primary strategies for waste management, worldwide. Especially, recycling operations are viewed as among the most effective techniques for reducing the amount of municipal solid waste disposed at landfill sites. Botswana's environmental policy on recycling stipulates, among others, that all waste management authorities should provide information on the classification and quantities of controlled waste targeted for recycling. This paper, therefore, examines the extent to which recycling operations in Botswana have either been conducted in compliance with or in violation of some major environmental requirements as enunciated on statutory guidelines. Compatibility between environmental policies on recycling and actual practice is evaluated focusing on two companies (Dumatau trading and Botswana Tissue) involved in recycling operation. Data from the two companies is complemented by one collected from the Gaborone landfill site. Finally, this study discusses on the role played by various stakeholders in policy formulation and implementation with particular emphasis being placed on a select number of non-governmental organisations (NGO).     

Households’ recycling efforts

Households’ recycling effort is often argued to be of an insignificant size. It is also frequently argued that this contribution, if significant, is not a cost to households, since it is voluntary. Thus households’ use of time and energy are frequently disregarded in cost-benefit analyses of stricter recycling targets. In this survey, based on 1162 interviews, we find that sorting at source involves significant extra use of time and energy in the households. On average, each of those asked reported that they use close to half an hour a week for cleaning, sorting and transporting recyclable waste. On average, 185 h is used per tonne of waste. Four out of ten reported that they use warm or hot water to clean the materials. When investigating the motives for sorting waste, we find that many perceive sorting as mandatory, while some in fact find it a pleasant activity in itself. Moral motives for sorting at source are also widespread. A majority would prefer that a company took over the sorting if this were possible, and on average, the respondents are willing to pay US$ 20/year for this service.     

Differentiation of determinants of low-cost and high-cost recycling

The bulk of research on recycling has been devoted to disentangling factors that affect it. Based on the low-cost hypothesis, we suggest that psychological factors differentially influence behaviors that are relatively less costly to perform compared to behaviors that are more costly to perform. Recycling has often been viewed as low-cost behavior, neglecting that recycling in different waste categories may vary in cost. The aim of the present study was to apply and extend the low-cost hypothesis by investigating whether beliefs about environmental consequences, knowledge, and norms differentially affect low-cost and high-cost recycling. A survey of 418 participants showed that knowledge, social norms, and personal norms were related to both low-cost and high-cost recycling, but the relation was significantly stronger for high-cost recycling. Personal norms partially mediated procedural knowledge and social norms in both low-cost and high-cost recycling. The findings emphasize the need to regard recycling as a multiform behavior and to analyse its determinants separately for different waste categories.     

建筑废弃物的回收原理与方法研究

由于社会和经济因素的要求,当今的建筑生命周期要最大程度地完成圆形的循环过程,即重新使用拆建物料制造新产品。循环经济的大背景下,承建商通过坚实的理论基础,采用分层次的方法来进行建筑废弃物的管理。文中总结了两种方法的优点和缺点,进行了混合回收与源头分离两种方法的比较研究。最值得注意的是两个不同的意向方案:绿色星球计划和ICC-ESSAVETM方案。突出的可持续认证和设计方案及绿色星球计划侧重的能源效率模型时常被繁重调试系统的LEED所青睐。一旦被国际编码理事会所批准,这些文件可以在LEED的评分系统下或绿色星球计划中,帮助其寻找资格评分。文章最后分析了建筑废弃物的回收流程,并得出结论:高达95%的建筑和拆迁建筑废弃物都可以回收;回收相比垃圾填埋更节省资金;源头分离较混合回收需要更多的管理和劳动力,但能获得更大的经济利益;承建商应该组织和管理现场的回收工作。     

Costs and benefits of packaging waste recycling systems

This Special Issue provides several different perspectives on the complex issue of packaging waste recycling. It comprises a diverse and rich set of contributions with insights from very different disciplines that range from economics to engineering. All types of “costs and benefits” are addressed in this collection of articles. In addition to the economic and strictly financial impacts of selective collection and sorting of packaging waste, several authors discuss other types of impacts, such as the environmental and social ones. The reader will find articles that address recycling systems as a whole, pieces that focus on specific impacts and detailed discussions of particular material streams or waste management strategies. The Special Issue represents an indispensable resource for academics, policy-makers and practitioners with interests in recycling and packaging waste management.     

Understanding the normalisation of recycling behaviour and its implications for other pro-environmental behaviours: A review of social norms and recycling

This paper examines our understanding of recycling behaviour in the context of its increasing normalisation in the UK. It reflects on the recent history of dry recycling (i.e. recycling of ‘dry’ materials such as paper, glass, plastics and cans) and asks the question as to what influence policy drivers and the increased provision of facilities for recycling have had on people's behaviour. In reviewing the evidence for recycling being considered a norm, this paper explores what influence norms, habit and identities have on recycling behaviour.It then considers what lessons the evidence offers for using the normalisation of recycling behaviour in influencing more people to recycle and to adopt other sustainable behaviours. The somewhat contentious issue of whether engaging in recycling behaviours has a positive or negative effect on people engaging with other pro-environmental behaviours is discussed. The evidence shows that both positive and negative spillover occurs and understanding where the balance lies, as well as what effect recycling being a norm plays in this, is important in determining appropriate interventions to influence pro-environmental behaviours. The paper concludes with some observations on implications of the evidence on intervention approaches to influence pro-environmental behaviours.     

A model recycling program for Alabama

Solid waste disposal is becoming a difficult problem for many states. Since 1960, the amount of municipal solid waste (MSW) has been increasing at a rate of 1% per year. More than 75% of the waste is comprised of recyclable materials. Several states have mandated recycling to decrease the volume of waste intended for disposal. Those mandated programs are very popular, but depend on many political, social, and economic factors for success. While Alabama has the manufacturing infrastructure to support a mandated recycling program, no recycling legislation has been promulgated. At this time recycling is only being done on a voluntary basis. A mandatory program with the proper support, education and funding could allow Alabama to recycle much of the 5.2 million tons of waste that are generated within its borders each year.     

Metals recycling in the United States

Twenty-two metals for which secondary recovery is important, in terms of quantity and/or value, were compared and ranked for rate and efficiency of recycling, and availability of recycled metal. In general, their recycling rates trended upward over the period 1970–1993. Iron, aluminum, copper, gold, platinum, and lead accounted for most of the value of all secondary metal produced, while iron and steel dominated in terms of quantity produced and exported. The factors most influential on recycling rates are profitability, public support, organization of infrastructure, sortability, legislative support, and scrap purity. The share of supply accounted for by secondary metals is expected to surpass that of primary metals sometime in the next decade.     

General mathematical models for LCI recycling

Life cycle inventory (LCI) is becoming more widely used as a tool to evaluate the resource and energy use and the environmental releases associated with various products. The methodology for handling different recycling scenarios is also becoming increasingly important. Several different methods exist for handling recycling in an LCI. The method described in this paper uses mathematical models to show that the same basic equations can be used to handle a variety of recycling options for multi-product systems.