Application of internal standard method in recombinant luminescent bacteria test

Mercury and its organic compounds have been of severe concern worldwide due to their damage to the ecosystem and human health. The development of effective and affordable technology to monitor and signal the presence of bioavailable mercury is an urgent need. The Mer gene is a mercury-responsive resistant gene, and a mercury-sensing recombinant luminescent bacterium using the Mer gene was constructed in this study. The mer operon from marine Pseudomonas putida strain SP1 was amplified and fused with prompterless luxCDABE in the pUCD615 plasmid within Escherichia coli cells, resulting in pTHE30–E. coli. The recombinant strain showed high sensitivity and specificity. The detection limit of Hg^2 + was 5 nmol/L, and distinct luminescence could be detected in 30 min. Cd^2 +, Cu^2 +, Zn^2 +, Ca^2 +, Pb^2 +, Mg^2 +, Mn^2 +, and Al^3 + did not interfere with the detection over a range of 10^− 5–1 mM. Application of recombinant luminescent bacteria testing in environmental samples has been a controversial issue: especially for metal-sensing recombinant strains, false negatives caused by high cytotoxicity are one of the most important issues when applying recombinant luminescent bacteria in biomonitoring of heavy metals. In this study, by establishing an internal standard approach, the false negative problem was overcome; furthermore, the method can also help to estimate the suspected mercury concentration, which ensures high detection sensitivity of bioavailable Hg^2 +.     

Biodegradation of pendimethalin by Bacillus subtilis Y3

A bacterium strain Y3,capable of efficiently degrading pendimethalin,was isolated from activated sludge and identified as Bacillus subtilis according to its phenotypic features and 16 S rRNA phylogenetic analysis.This strain could grow on pendimethalin as a sole carbon source and degrade 99.5%of 100 mg/L pendimethalin within 2.5 days in batch liquid culture,demonstrating a greater efficiency than any other reported strains.Three metabolic products,6-aminopendimethalin,5-amino-2-methyl-3-nitroso-4-(pentan-3-ylamino) benzoic acid,and 8-amino-2-ethyl-5-(hydroxymethyl)-1,2-dihydroquinoxaline-6-carboxylic acid,were identified by HPLC-MS/MS,and a new microbial degradation pathway was proposed.A nitroreductase catalyzing nitroreduction of pendimethalin to 6-aminopendimethalin was detected in the cell lysate of strain Y3.The cofactor was nicotinamide adenine dinucleotide phosphate(NADPH) or more preferably nicotinamide adenine dinucleotide(NADH).The optimal temperature and pH for the nitroreductase were 30℃ and 7.5,respectively.Hg~(2+),Ni~(2+),Pb~(2+),Co~(2+),Mn~(2+) Cu~(2+),Ag~+,and EDTA severely inhibited the nitroreductase activity,whereas Fe~(2+),Mg~(2+),and Ca~(2+) enhanced it.This study provides an efficient pendimethalin-degrading microorganism and broadens the knowledge of the microbial degradation pathway of pendimethalin.     

Mechanism and kinetics of aluminum dissolution during copper sorption by acidity paddy soil in South China

Soil aggregates were prepared from a bulk soil collected from paddy soil in the Taihu Lake region and aluminum (Al) dissolution, solution pH changes during copper (Cu^2 +) sorption were investigated with static sorption and magnetic stirring. Kinetics of Cu^2 + sorption and Al dissolution were also studied by magnetic stirring method. No Al dissolution was observed until Cu^2 + sorption was greater than a certain value, which was 632, 450, 601 and 674 mg/kg for sand, clay, silt, and coarse silt fractions, respectively. Aluminum dissolution increased with increasing Cu^2 + sorption and decreasing solution pH. An amount of dissolved Al showed a significant positive correlation with non-specific sorption of Cu^2 + (R² > 0.97), and it was still good under different pH values (R² > 0.95). Copper sorption significantly decreased solution pH. The magnitude of solution pH decline increased as Cu^2 + sorption and Al dissolution increased. The sand and clay fraction had a less Al dissolution and pH drop due to the higher ferric oxide, Al oxide and organic matter contents. After sorption reaction for half an hour, the Cu^2 + sorption progress reached more than 90% while the Al dissolution progress was only 40%, and lagged behind the Cu^2 + sorption. It indicated that aluminum dissolution is associated with non-specific sorption.     

Hg removal from flue gas over different zeolites modified by FeCl3

The elemental mercury removal abilities of three different zeolites (NaA, NaX, HZSM-5) impregnated with iron(III) chloride were studied on a lab-scale fixed-bed reactor. X-ray diffraction, nitrogen adsorption porosimetry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and temperature programmed desorption (TPD) analyses were used to investigate the physicochemical properties. Results indicated that the pore structure and active chloride species on the surface of the samples are the key factors for physisorption and oxidation of Hg⁰, respectively. Relatively high surface area and micropore volume are beneficial to efficient mercury adsorption. The active Cl species generated on the surface of the samples were effective oxidants able to convert elemental mercury (Hg⁰) into oxidized mercury (Hg^2 +). The crystallization of NaCl due to the ion exchange effect during the impregnation of NaA and NaX reduced the number of active Cl species on the surface, and restricted the physisorption of Hg⁰. Therefore, the Hg⁰ removal efficiencies of the samples were inhibited. The TPD analysis revealed that the species of mercury on the surface of FeCl₃–HZSM-5 was mainly in the form of mercuric chloride (HgCl₂), while on FeCl₃–NaX and FeCl₃–NaA it was mainly mercuric oxide (HgO).     

Interaction between Cu and different types of surface-modified nanoscale zero-valent iron during their transport in porous media

This study investigated the interaction between Cu^2 + and nano zero-valent iron (NZVI) coated with three types of stabilizers (i.e., polyacrylic acid [PAA], Tween-20 and starch) by examining the Cu^2 + uptake, colloidal stability and mobility of surface-modified NZVI (SM-NZVI) in the presence of Cu^2 +. The uptake of Cu^2 + by SM-NZVI and the colloidal stability of the Cu-bearing SM-NZVI were examined in batch tests. The results showed that NZVI coated with different modifiers exhibited different affinities for Cu^2 +, which resulted in varying colloidal stability of different SM-NZVI in the presence of Cu^2 +. The presence of Cu^2 + exerted a slight influence on the aggregation and settling of NZVI modified with PAA or Tween-20. However, the presence of Cu^2 + caused significant aggregation and sedimentation of starch-modified NZVI, which is due to Cu^2 + complexation with the starch molecules coated on the surface of the particles. Column experiments were conducted to investigate the co-transport of Cu^2 + in association with SM-NZVI in water-saturated quartz sand. It was presumed that a physical straining mechanism accounted for the retention of Cu-bearing SM-NZVI in the porous media. Moreover, the enhanced aggregation of SM-NZVI in the presence of Cu^2 + may be contributing to this straining effect.     

The biological effect of metal ions on the granulation of aerobic granular activated sludge

As a special biofilm structure, microbial attachment is believed to play an important role in the granulation of aerobic granular activated sludge (AGAS). This experiment was to investigate the biological effect of Ca^2 +, Mg^2 +, Cu^2 +, Fe^2 +, Zn^2 +, and K⁺ which are the most common ions present in biological wastewater treatment systems, on the microbial attachment of AGAS and flocculent activated sludge (FAS), from which AGAS is always derived, in order to provide a new strategy for the rapid cultivation and stability control of AGAS. The result showed that attachment biomass of AGAS was about 300% higher than that of FAS without the addition of metal ions. Different metal ions had different effects on the process of microbial attachment. FAS and AGAS reacted differently to the metal ions as well, and in fact, AGAS was more sensitive to the metal ions. Specifically, Ca^2 +, Mg^2 +, and K⁺ could increase the microbial attachment ability of both AGAS and FAS under appropriate concentrations, Cu^2 +, Fe^2 +, and Zn^2 + were also beneficial to the microbial attachment of FAS at low concentrations, but Cu^2 +, Fe^2 +, and Zn^2 + greatly inhibited the attachment process of AGAS even at extremely low concentrations. In addition, the acylated homoserine lactone (AHL)-based quorum sensing system, the content of extracellular polymeric substances and the relative hydrophobicity of the sludges were greatly influenced by metal ions. As all these parameters had close relationships with the microbial attachment process, the microbial attachment may be affected by changes of these parameters.     

Bio-remediation of acephate–Pb(II) compound contaminants by Bacillus subtilis FZUL-33

Removal of Pb~(2+)and biodegradation of organophosphorus have been both widely investigated respectively. However, bio-remediation of both Pb~(2+)and organophosphorus still remains largely unexplored. Bacillus subtilis FZUL-33, which was isolated from the sediment of a lake, possesses the capability for both biomineralization of Pb~(2+)and biodegradation of acephate. In the present study, both Pb~(2+)and acephate were simultaneously removed via biodegradation and biomineralization in aqueous solutions.Batch experiments were conducted to study the influence of p H, interaction time and Pb~(2+)concentration on the process of removal of Pb2+. At the temperature of 25°C, the maximum removal of Pb~(2+)by B. subtilis FZUL-33 was 381.31 ± 11.46 mg/g under the conditions of p H 5.5, initial Pb~(2+)concentration of 1300 mg/L, and contact time of 10 min. Batch experiments were conducted to study the influence of acephate on removal of Pb~(2+)and the influence of Pb2+on biodegradation of acephate by B. subtilis FZUL-33. In the mixed system of acephate–Pb2+, the results show that biodegradation of acephate by B. subtilis FZUL-33 released PO43+, which promotes mineralization of Pb2+. The process of biodegradation of acephate was affected slightly when the concentration of Pb2+was below 100 mg/L. Based on the results, it can be inferred that the B. subtilis FZUL-33 plays a significant role in bio-remediation of organophosphorus-heavy metal compound contamination.     

Modeling of acute cadmium toxicity in solution to barley root elongation using biotic ligand model theory

Protons（H⁺）as well as different major and trace elements may inhibit cadmium（Cd）uptake in aquatic organisms and thus alleviate Cd toxicity.However,little is known about such interactions in soil organisms.In this study,the independent effects of the cations calcium(Ca²⁺),magnesium(Mg²⁺),potassium（K⁺）,H+and zinc(Zn²⁺)on Cd toxicity were investigated with 5-day long barley root elongation tests in nutrient solutions.The tested concentrations of selected cations and trace metal ions were based on the ranges that occur naturally in soil pore water.The toxicity of Cd decreased with increasing activity of Ca²⁺,Mg²⁺,H⁺and Zn²⁺,but not K⁺.Accordingly,conditional binding constants were obtained for the binding of Cd²⁺,Ca²⁺,Mg²⁺,H⁺,and Zn²⁺ with the binding ligand:log K_CdBL5.19,logK_CaBL2.87,logK_MgBL2.98,logK_HBL5.13 and logK_ZnBL5.42,respectively.Furthermore,it was calculated that on average 29% of the biotic ligand sites needed to be occupied by Cd to induce a 50% decrease in root elongation.Using the estimated constants,a biotic ligand model was successfully developed to predict the Cd toxicity to barley root elongation as a function of solution characteristics.The feasibility and accuracy of its application for predicting Cd toxicity in soils were discussed.     

Ca and OH release of ceramsites containing anorthite and gehlenite prepared from waste lime mud

Lime mud is a kind of solid waste in the papermaking industry, which has been a source of serious environmental pollution. Ceramsites containing anorthite and gehlenite were prepared from lime mud and fly ash through the solid state reaction method at 1050°C. The objective of this study was to explore the efficiency of Ca^2 + and OH⁻ release and assess the phosphorus and copper ion removal performance of the ceramsites via batch experiments, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that Ca^2 + and OH⁻ were released from the ceramsites due to the dissolution of anorthite, gehlenite and available lime. It is also concluded that gehlenite had stronger capacity for Ca^2 + and OH⁻ release compared with anorthite. The Ca^2 + release could be fit well by the Avrami kinetic model. Increases of porosity, dosage and temperature were associated with increases in the concentrations of Ca^2 + and OH⁻ released. Under different conditions, the ceramsites could maintain aqueous solutions in alkaline conditions (pH = 9.3–10.9) and the release of Ca^2 + was not affected. The removal rates of phosphorus and copper ions were as high as 96.88% and 96.81%, respectively. The final pH values of both phosphorus and copper ions solutions changed slightly. The reuse of lime mud in the form of ceramsites is an effective strategy.     

Enhanced catalytic complete oxidation of 1,2-dichloroethane over mesoporous transition metal-doped γ-Al2O3

High-surface-area mesoprous powders of γ-Al₂O₃ doped with Cu^2 +, Cr^3 +, and V^3 + ions were prepared via a modified sol–gel method and were investigated as catalysts for the oxidation of chlorinated organic compounds. The composites retained high surface areas and pore volumes comparable with those of undoped γ-Al₂O₃ and the presence of the transition metal ions enhanced their surface acidic properties. The catalytic activity of the prepared catalysts in the oxidation of 1,2-dichloroethane (DCE) was studied in the temperature range of 250–400°C. The catalytic activity and product selectivity were strongly dependent on the presence and the type of dopant ion. While Cu^2 +- and Cr^3 +-containing catalysts showed 100% conversion at 300°C and 350°C, V^3 +-containing catalyst showed considerably lower conversion. Furthermore, while the major products of the reactions over γ-alumina were vinyl chloride (C₂H₃Cl) and hydrogen chloride (HCl) at all temperatures, Cu- and Cr-doped catalysts showed significantly stronger capability for deep oxidation to CO₂.