Regulation of bacterial abstraction of lead by cell surface charge and chemical equilibria

Micrococcus luteus cells greatly enhanced the abstraction of lead contained within pouches made of dialyzing tubing. The amount of soluble lead abstracted and subsequently interacting with the cells intertied with the concentration of negative surface charge of the cells. The chemical form of the soluble lead removed from the pouches by bacterial cells existed within the narrow limits of lead solubility through a cyclic phenomenon involving culture pH and carbonate and phosphate equilibria.The initiation of the transfer of lead by the surface charge of cells with a concomitant shift in the solubility equilibrium exerting control over the system illustrated a metal translocation system that should not be uncommon in nature.     

Composite tin and zinc oxide nanocrystalline particles for enhanced charge separation in sensitized degradation of dyes

Composite ZnO/SnO2 catalyst has been studied for the sensitized degradation of dyes e.g. Eosin Y (2', 4', 5', 7'-tetrabromofluorescein disodium salt) in relation to efficient charge separation properties of the catalyst. Improved photocatalytic activity was observed in the case of ZnO/SnO2 composite catalyst compared to the catalytic activity of ZnO, SnO2 or TiO2 powder. The suppression of charge recombination in the composite ZnO/SnO2 catalyst led to higher catalytic activity for the degradation of Eosin Y. Degradation of Eosin follows concomitant formation of CO2 and formation of CO2 followed a pseudo-first-order rate. Photoelectrochemical cells constructed using SnO2, ZnO, ZnO/SnO2 sensitized with Eosin Y showed V(oc) of 175, 306, 512 mV/cm2 and I(sc) of 50, 70, 200 microA/cm2 respectively. A higher irreversible degradation of Eosin Y and higher V(oc) observed on composite ZnO/SnO2 than ZnO and SnO2 separately can be considered as a proof of enhanced charge separation of ZnO/SnO2 catalyst. Eosin Y showed a higher emission decreases on ZnO/SnO2 composite than on individual ZnO, SnO2 or TiO2 indicating dominance of the charge injection process. Photoinjected electrons are tunneled from ZnO to SnO2 particles accumulating injected electrons in the conduction bands allowing wider separation of excited carriers.     

A global transport model of lead in the atmosphere

A global atmospheric transport model is used to calculate lead concentrations in the atmosphere. The model performance is evaluated through comparisons with observations in Europe. The model results of lead concentrations in surface air were compared with measurements in East Asia. The detailed comparisons showed generally good agreement for recent decades, although systematic underestimation was found in China. Anthropogenic lead emissions in China are estimated from economic statistics to be 56 000 t yr^?1, which is not small considering the economic scale of China. The underestimations suggest a hidden source of lead emissions. The emissions in Japan and Korea are derived from optimization by the model. The magnitude is about 2000 t yr^?1, which is much greater than that reported by the Pollutant Release and Transfer Register in Japan and Toxics Release Inventory in Korea.     

Forecasting model to assess the potential of secondary lead production from lead acid battery scrap

Environmental Science and Pollution Research - Lead acid battery (LAB) scrap management is an important issue both environmentally and economically. The recovery of lead from battery scrap leads to...     

好氧MBR处理垃圾渗滤液中膜面优势污染物及污染阻力

将好氧MBR处理垃圾渗滤液装置中的污泥混合液进行合理分离,通过死端过滤实验和膜污染阻力测定实验,以确定MBR中造成膜污染的优势污染物和优势污染阻力。实验结果表明,上清液中的胶体物质和大分子粘性有机物是造成膜污染的优势污染物;膜污染阻力主要由凝胶极化阻力和外部污染阻力构成,二者之和占总污染阻力的95%以上。     

Distribution and temporal changes of lead in the surface seawater in the western Pacific and adjacent seas derived from coral skeletons

We determined Pb contents together with Pb isotopic compositions in coral skeletons (Porites spp.) collected from the western Pacific and adjacent seas to examine distribution of Pb in sea surfaces. Temporal records of Pb were also investigated using coral skeletons from Hainan and Ogasawara Island, located in China and Japan, respectively. The spatial distribution of Pb showed a clear dilution pattern of Pb from Asian continent to the open ocean. Also the similar trend was found in the Java Sea from Jakarta to the offshore. In addition to the spatial distribution, Pb contents in Ogasawara coral have gradually increased during last 108 years. It may be attributed to Pb emission mainly from industrial activities in Asian countries. Hainan coral, which provided 10 years record of Pb, showed a remarkable decline around 1997 probably due to the partial introduction of unleaded gasoline in China.     

Measurement of the surface charge of ultrafine particles from laser printers and analysis of their electrostatic force

Ultrafine particles (UFPs) released from laser printers are electrostatically charged during the working processes of the devices, and the electrostatic force can obviously influence the dynamics of the particles. Due to the measurement difficulty and scarcity of relevant research, this issue was not reported. This study tried to address this issue through experimental measurement of the surface charge of UFPs and numerical investigation on the influence of electrostatic force on the dynamics of UFPs. A test chamber was set up to collect the UFPs, and the Scanning Electron Microscope was used to observe the morphologies of the UFPs. Based on the particle diameter and surface zeta potential, the surface charge of UFPs was calculated. The measurement results gave that particle emitted from laser printers are negatively charged and the average surface charge of particle emissions for four laser printers is in a range of about ?4.16 × 10^?17 to ?6.07 × 10^?17 C (～?260 to ?379 e). This paper also discussed the influence of electrostatic force on the dynamics of UFPs. According to the numerical investigation, it was found that, in the absence of electric field, the electrostatic force has to be considered when the surface charge is larger than 1 × 10^?16 C and when the UFP is very close to the wall with a distance of less than 0.01 m. These findings will guide constructively in predicting the dispersion and deposition of particles emitted from laser printers.     

Variation in the relationship between blood lead and air lead

Estimates of the slope of the relationship between blood lead (μg dl⁻¹) and air lead (μg m⁻³) obtained in ten independent studies are compared. No significant differences were detected among the estimates which ranged from 0.6 to 3.1 μg dl⁻¹ per μg m⁻³ and represented male adult, female adult and child populations. A single best estimate of 1.2 μg dl⁻¹ per μg m⁻³ ( ± 0.2,95 per cent confidence limits) was obtained. It is concluded that, if the blood lead-air lead slope depends on various physical and biological factors, then studies providing more precise estimates are required to detect these differences.     

Effects of aluminum substitution on the surface charge of colloidal goethite particles: experiments and MUSIC modeling

Environmental Science and Pollution Research - Proton adsorption behavior on the surface of Al-substituted goethites as a function of pH and ionic strength was investigated and simulated with the...     

Assessing background particulate contamination in an historic building – surface lead loading and contamination

ABSTRACT

Investigation of suspect surface contamination in a building may require comparative sampling across different zones to provide meaningful information with regard to contaminant sources, pathways and/or extent of dispersal. However, evaluation of the data using traditional null hypothesis significance testing (NHST) based upon the mean may result in misleading inference when encountering erratic distributions typical of environmental contaminant data. Sampling data (n = 90) for lead content in surface dust collected throughout a historic building with suspect contamination from uncontrolled disturbance to lead coatings were evaluated using traditional NHST and randomization/permutation inference; the latter metric was the maximum difference in frequency of detection (Δfd _max), to directly calculate the probability of the observed differences. In the examples for lead in surface dust presented herein, areas with “lower” mean concentration and/or no significant difference via NHST actually represented “greater contamination,” as Δfd _max indicated a greater probability of encountering lead at higher concentrations. Resulting conclusions with regard to sources and pathways contradicted those generated from traditional NHST, and underscore the need to recognize differences in applicability of different inference approaches, depending upon the distribution of the data and the particular problem. This is particularly relevant for forensic purposes.     

ATR-FTIR investigation of the role of phenolic groups in the interaction of some NOM model compounds with aluminum hydroxide

The role of phenolic groups in the interaction of natural organic matter (NOM) with metal hydroxides was investigated with ATR-FTIR spectroscopy and adsorption tests by employing a series of dihydroxybenzoic acids (DHBAs) as the NOM surrogates and aluminum hydroxide as the adsorbent. All DHBAs examined in this study were found to be adsorbed on aluminum hydroxide by forming inner-sphere complexes. Carboxylic groups governed the complexation of DHBAs with aluminum hydroxide at low pH or in cases when the two hydroxyl groups were not adjacent to each other and neither of them was ortho to the carboxylic group. The involvement of the phenolic groups, ortho to another phenolic group or ortho to the carboxylic groups, in the complexation increased with increasing pH as the deprotonation of phenolic groups was easier at higher pH. The presence of phenolic groups increased the electron density of the carboxylic groups and facilitated the inner-sphere complexation of the carboxylic groups with metal hydroxide. The correlation between the pK_a values and the amount of organic acid adsorbed on the aluminum hydroxide revealed that the adsorption of DHBAs at acidic pH was largely dependent on the surface chelate formation rather than on the electronic effect.     

A model for prediction of product distributions for the reactions of phenol derivatives with hydroxyl radicals

In this study, with the intention of estimating the photocatalytic or photodegradation rates and finding certain predictors to be used for the determination of the most probable reaction path and the primary intermediate, the reactions of (*)OH radicals with 11 phenol derivatives including benzene were modeled. For 43 possible reaction routes, calculations of the geometric parameters, the electronic and thermodynamic properties of the reactants, the product radicals and the transition state complexes were performed with the semiempirical PM3 and DFT/B3LYP/6-31G(*) methods. The solvation effects were computed using COSMO as the solvation model. Based on the results of quantum mechanical calculations, the rate constants, the branching ratios and the product distributions of all the possible reaction paths were calculated by means of the transition state theory. Three predictors were determined for the prediction of the most probable transition state and the reaction path. The differences in the reaction rates were explained in terms of the presence of hydrogen bonds in the transition state complexes and the entropy effects. Finally the results obtained were compared with the available experimental data in order to assess the reliability of the proposed model.     

Field calibration of surface: A model of agricultural chemicals in surface waters

Abstract

Agricultural chemicals sporadically occur at detectable levels in the surface waters of intensively farmed watersheds. HSPF, a previously released model of agricultural chemicals in surface water, had been used to predict concentrations which were much higher (10 X) than those actually observed during monitoring studies. A new model, SURFACE, is described here which is much simpler than HSPF and gives better predictions of surface water concentrations. SURFACE uses PRZM, an EPA model, to calculate edge‐of‐field runoff losses and simple hydraulic routing algorithms to determine concentrations at the bottom of large river basins. In water systems sampled during 1985 and 1986, SURFACE predictions of annualized mean concentrations for alachlor, atrazine, cyanazine and metolachlor were within 0.09 ppb half of the time.     

Field calibration of surface: a model of agricultural chemicals in surface waters

Agricultural chemicals sporadically occur at detectable levels in the surface waters of intensively farmed watersheds. HSPF, a previously released model of agricultural chemicals in surface water, had been used to predict concentrations which were much higher (10 X) than those actually observed during monitoring studies. A new model, SURFACE, is described here which is much simpler than HSPF and gives better predictions of surface water concentrations. SURFACE uses PRZM, an EPA model, to calculate edge-of-field runoff losses and simple hydraulic routing algorithms to determine concentrations at the bottom of large river basins. In water systems sampled during 1985 and 1986, SURFACE predictions of annualized mean concentrations for alachlor, atrazine, cyanazine and metolachlor were within 0.09 ppb half of the time.     

Study of lead phytoavailability for atmospheric industrial micronic and sub-micronic particles in relation with lead speciation

Particles from channelled emissions of a battery recycling facility were size-segregated and investigated to correlate their speciation and morphology with their transfer towards lettuce. Microculture experiments carried out with various calcareous soils spiked with micronic and sub-micronic particles (1650 ± 20 mg Pb kg⁻¹) highlighted a greater transfer in soils mixed with the finest particles. According to XRD and Raman spectroscopy results, the two fractions presented differences in the amount of minor lead compounds like carbonates, but their speciation was quite similar, in decreasing order of abundance: PbS, PbSO₄, PbSO₄·PbO, α-PbO and Pb⁰. Morphology investigations revealed that PM_2.5 (i.e. Particulate Matter 2.5 composed of particles suspended in air with aerodynamic diameters of 2.5 μm or less) contained many Pb nanoballs and nanocrystals which could influence lead availability. The soil-plant transfer of lead was mainly influenced by size and was very well estimated by 0.01 M CaCl₂ extraction.     

Comparison of the adsorption of lead,cadmium, copper,zinc and barium to freshwater surface coatings

Measurements were made regarding the adsorption of lead, cadmium, copper, zinc and barium to freshwater surface coatings (biofilms and associated minerals), which were collected in Nanhu Lake in Jilin Province, PR China, in order to investigate the variability of adsorption capacities of these heavy metals mentioned in the above surface coatings. The adsorption of lead and other heavy metals to the biofilms was observed to decrease in the following order: copper, lead, zinc, cadmium, and barium. Generally, the values of Gamma(max) (the maximum adsorption, micromol/m(2)) increased with the standard electrode potential of metal elements used and were recorded as 166.7, 40.0, 29.4, 10.8, and 1.8 for copper, lead, zinc, cadmium and barium, respectively. The values of 1/Gamma(max) increased linearly with the decrease in values of the standard electrode potential of metal elements with a significant correlation (n=5, p=0.01) and increased linearly with the increase in values of covalent radius of metal elements with a significant correlation (n=5, p=0.05). This indicates that standard electrode potential and covalent radius were two of the principal characteristics of metals employed, causing the variation of lead and other heavy metal adsorption to the surface coatings.     

Control of lead solubility in soil contaminated with lead shot: effect of soil pH

An incubation experiment was carried out to assess the rate of oxidation of Pb shot and subsequent transfer of Pb to the soil under a range of soil pH conditions. Lead shot corrosion was rapid, so that soil solution and fine earth (<1mm) Pb concentrations increased rapidly within a few months. Corrosion products, dominated by hydrocerussite (Pb(3)(CO(3))(2)(OH)(2)), developed in crusts surrounding individual Pb pellets. However, irrespective of pH, Pb(2+) activities in the soil solutions, modelled using WHAM 6, were much lower than would be the case if they were controlled by the solubility of the dominant Pb compounds present in the Pb shot crust material. In contrast, modelling of soil solid-solution phase distribution of Pb, again using WHAM 6, suggested that, at least during the 24 months of the study, soil solution Pb concentrations were more likely to be controlled by sorption of Pb by the soil solid phase.