Municipal solid waste management in Africa: strategies and livelihoods in Yaoundé, Cameroon

This paper provides an overview of the state of municipal solid waste (MSW) management in the capital of Cameroon, Yaoundé, and suggests some possible solutions for its improvement. The institutional, financial, and physical aspects of MSW management, as well as the livelihoods of the population, were analyzed. Our study revealed that distances and lack of infrastructure have a major impact on waste collection. Garbage bins are systematically mentioned as the primary infrastructure needed by the population in all quarters, whether it be a high or low standard community. The construction of transfer stations and the installation of garbage bins are suggested as a solution to reduce distances between households and garbage bins, thus improving waste collection vehicle accessibility. Transfer stations and garbage bins would enable the official waste collection company to expand its range of services and significantly improve waste collection rates. Several transfer stations have already been set up by non-governmental organizations (NGOs) and community-based organizations (CBOs), but they require technical, institutional and funding support. Research is needed on the quality and safety of community-made compost, as well as on soil fertility in urban and peri-urban areas. Most of the stakeholders, municipalities, the official waste collection company and households acknowledge the need for better monitoring and regulation of MSW management. The urban community of Yaoundé also needs to maintain its support of MSW management and promote the sustainability of NGOs and CBOs operating in underserved areas not yet covered by adequate infrastructures. A major opportunity for implementation of such waste policy is the heavily indebted poor countries (HIPC) program dedicated to urban planning and good governance.     

Management of recycling in the Gulf Co-operation Council states

Although some of the Gulf Co-operation Council (GCC) member states have placed recycling at the top of their waste management priorities, the low cost of landfill and the availability of land, usually old sand or gravel quarries, make recycling programs infeasible, uneconomical and unachievable. The only comprehensive form of recycling available within the GCC states is recycling of paper and cartons. The majority of the GCC states never set national or regional recycling targets. The cost of recycling in the GCC states region could be moderate to high depending on the collection system selected for the recycling program. Almost all of the cities within the GCC states use mechanised systems for daily collection of municipal solid waste (MSW). Therefore, the same daily collection system used for MSW might well be used for collection of recyclable materials, both on the same day and at the same time, or according to a different timetable. This paper provides strategies for developing an effective recycling marketing program and discusses regional co-ordination options.     

The collection system for residential recyclables in communities in Haidian District, Beijing: a possible approach for China recycling

Recycling and reusing recyclables is an important way to solve the municipal solid waste (MSW) problem. As the collection of solid waste takes up the largest percentage of MSW management budgets, improving the collection of recyclables is important. Since the decline of government-run waste buying depots in the late 1980s, the collection of recyclables from households and waste deposit sites in China is done by buyers with small informal bases and waste pickers, who are usually unskilled rural people who have come to the cities. Because of this, the current system is seen to have social problems. So, the recyclable collection system has both social as well as economic significance. China is in the process of rapid industrialization and urbanization, and a new mode of community collection system is emerging. It operates by market mechanisms, with waste collection companies that are supported by the municipal government, establishing recycle service sites, and employing workers to buy recyclables door-to-door. This paper is a case study of the new system in the Haidian District, Beijing. It summarizes the system, compares it to experiences in other countries and discusses whether the new approach contributes to resources recycling in China.     

Municipal solid-waste management in Istanbul

Istanbul, with a population of around 13 million people, is located between Europe and Asia and is the biggest city in Turkey. Metropolitan Istanbul produces about 14,000 tons of solid waste per day. The aim of this study was to assess the situation of municipal solid-waste (MSW) management in Istanbul. This was achieved by reviewing the quantity and composition of waste produced in Istanbul. Current requirements and challenges in relation to the optimization of Istanbul’s MSW collection and management system are also discussed, and several suggestions for solving the problems identified are presented. The recovery of solid waste from the landfills, as well as the amounts of landfill-generated biogas and electricity, were evaluated. In recent years, MSW management in Istanbul has improved because of strong governance and institutional involvement. However, efforts directed toward applied research are still required to enable better waste management. These efforts will greatly support decision making on the part of municipal authorities. There remains a great need to reduce the volume of MSW in Istanbul.     

Comparison of old and new municipal solid waste management systems in Denizli, Turkey

Rapid economic growth, increasing population and change in living standards contribute to increasing the generation rate of municipal solid waste (MSW) in Denizli city, like other Turkish cities. The improper and poor MSW management system (old system) in Denizli caused environmental problems originating from the uncontrolled release of methane and leachate. In addition, the disposal of recyclable materials in unsanitary landfills is responsible for the consumption and destruction of natural sources. This paper presents a general overview of old and new MSW management practices in Denizli. Detailed data on MSW management practices including collection, transportation, disposal and recycling have been presented. The amount of solid waste generated in Denizli over the last decade has increased steadily over the years, from 108,500 tons in 1995 to 179,495 tons in 2006. The average MSW generation rate was found to be 1.23kg/day per capita. The major constituent of MSW in Denizli is food waste, but the percentage of recyclable waste has increased significantly recently. Except for metal wastes, the percentages of recyclable waste materials in Denizli are higher than in all neighborhood cities. The objective of this study is to compare the old and new MSW management systems in Denizli city. The MSW management system has been changed entirely last five years. A dumpsite was closed and a sanitary landfill with a composting facility was constructed. In addition, source separated collection has been carried out since 2002. The quantity of recyclable waste collected increased from 195 to 1549 tons. The amount of recyclable waste will continue to be increased by expanding the source separation collection system to all the districts of the city and preventing scavenging. Thus, revenue from recyclable waste ($7227 in 2006) is expected to increase. In addition, the capacity of the composting facility will be increased. Most importantly, information to increase public participation and awareness in municipal recovery programs has to be provided.     

Municipal solid waste source-separated collection in China: A comparative analysis

A pilot program focusing on municipal solid waste (MSW) source-separated collection was launched in eight major cities throughout China in 2000. Detailed investigations were carried out and a comprehensive system was constructed to evaluate the effects of the eight-year implementation in those cities. This paper provides an overview of different methods of collection, transportation, and treatment of MSW in the eight cities; as well as making a comparative analysis of MSW source-separated collection in China. Information about the quantity and composition of MSW shows that the characteristics of MSW are similar, which are low calorific value, high moisture content and high proportion of organisms. Differences which exist among the eight cities in municipal solid waste management (MSWM) are presented in this paper. Only Beijing and Shanghai demonstrated a relatively effective result in the implementation of MSW source-separated collection. While the six remaining cities result in poor performance. Considering the current status of MSWM, source-separated collection should be a key priority. Thus, a wider range of cities should participate in this program instead of merely the eight pilot cities. It is evident that an integrated MSWM system is urgently needed. Kitchen waste and recyclables are encouraged to be separated at the source. Stakeholders involved play an important role in MSWM, thus their responsibilities should be clearly identified. Improvement in legislation, coordination mechanisms and public education are problematic issues that need to be addressed.     

Urban solid waste management in Chongqing: challenges and opportunities

The dual influences of the resource supply and protection in ecological environments will pose a significant challenge to China's sustainable development. Solid waste management offers opportunities to improve profits by conserving resources and improving environmental performance. This paper examines municipal solid waste (MSW) management in urban Chongqing, the nation's fourth largest municipality after Beijing, Shanghai and Tianjin. In this paper, we will provide information on the quantity and composition of MSW, as well as give an overview of different methods for collection, transport, treatment and disposal of MSW. At present the daily amount of MSW generated per person is about 1.08 kg; food waste accounts for about 59% of total MSW. MSW in Chongqing has a higher moisture content (64.1%) and a lower LHV (3728 kJ/kg) than other cities in Asia, which is an obstruction for incineration. Landfills are the main method of disposal in Chongqing, but pollution caused by simple landfills and lack of backup MSW disposal capacity are becoming major problems in the main districts of Chongqing. In this paper, the challenges being faced and opportunities to MSW in Chongqing are analyzed and some suggestions are given for improving the MSW system in the future.     

Trends and problems of solid waste management in developing countries: a case study in seven Palestinian districts

There is a great interest in solving problems related to municipal solid waste (MSW) management in the Palestinian territory. However, few studies have been done to assess the extent of these problems and suggest the best alternative solutions. This study aims at assessing MSW conditions in the seven major districts in northern West Bank, Palestinian territory. The study focuses on comparing several MSW management elements (such as collection, budget, and disposal) in municipalities, village councils, and refugee camps in the studied districts and the problems faced by these institutions in handling the waste. It also provides information on MSW collection service availability and waste disposal practices in the districts studied. It was found that, although MSW collection service was available for 98% of the residents in the areas surveyed, no proper treatment or landfill procedure was followed for the collected waste in most of these areas. Instead, waste burning in open dumpsites was the most common practice. Moreover, due to inefficient collection of waste disposal fees from the residents, municipalities were forced to sometimes cut the collection service and reduce its labor force, especially in villages. The budget for MSW management was between 2% and 8% of the total budget of the municipalities studied, indicating a low priority for this issue.     

Research on solid waste management system: to improve existing situation in Corlu Town of Turkey

Over the past decades, uncontrolled population growth and rapid urbanization and industrialization have resulted in environmental problems in Corlu Town, Turkey. One of the most important problems is solid waste due to inadequate management practices. Nowadays, increasing public awareness of the environment compels local authorities to define and to adopt new solutions for waste management. This paper presents a general overview of current solid waste management practices in Corlu Town and principles of the recommended municipal solid waste (MSW) management system. In Corlu, 170 tonnes of municipal solid waste are generated each day, or 1.150 kg per capita per day. Approximately one-half of the municipal solid waste generated is organic material and 30% of the MSW consists of recyclable materials. The recommended system deals with maximizing recycling and minimizing landfilling of municipal solid waste, and consists of separation at source, collection, sorting, recycling, composting and sanitary landfilling. This study also analyzed the recommended system with respect to feasibility and economics. To evaluate whether the suggested system is cost effective or not, the operating cost of the recommended system and market prices of recyclable materials were compared, and the results show that the recommended system will reduce required landfill volume up to 27% of compared to the present situation. The profit of the recommended system is estimated to be about 80 million US dollars.     

Pneumatic vs. door-to-door waste collection systems in existing urban areas: a comparison of economic performance

Pneumatic waste collection systems are becoming increasingly popular in new urban residential areas, and an attractive alternative to conventional vehicle-operated municipal solid waste (MSW) collection also in ready-built urban areas. How well pneumatic systems perform in ready-built areas is, however, an unexplored topic. In this paper, we analyze how a hypothetical stationary pneumatic waste collection system compares economically to a traditional vehicle-operated door-to-door collection system in an existing, densely populated urban area. Both pneumatic and door-to-door collection systems face disadvantages in such areas. While buildings and fixed city infrastructure increase the installation costs of a pneumatic system in existing residential areas, the limited space for waste transportation vehicles and containers cause problems for vehicle-operated waste collection systems. The method used for analyzing the cost effects of the compared waste collection systems in our case study takes into account also monetized environmental effects of both waste collection systems. As a result, we find that the door-to-door collection system is economically almost six times more superior. The dominant cost factor in the analysis is the large investment cost of the pneumatic system. The economic value of land is an important variable, as it is able to reverse the results, if the value of land saved with a pneumatic system is sufficiently high.     

Methodology to design a municipal solid waste generation and composition map: A case study

The municipal solid waste (MSW) management is an important task that local governments as well as private companies must take into account to protect human health, the environment and to preserve natural resources. To design an adequate MSW management plan the first step consist in defining the waste generation and composition patterns of the town. As these patterns depend on several socio-economic factors it is advisable to organize them previously. Moreover, the waste generation and composition patterns may vary around the town and over the time. Generally, the data are not homogeneous around the city as the number of inhabitants is not constant nor it is the economic activity. Therefore, if all the information is showed in thematic maps, the final waste management decisions can be made more efficiently. The main aim of this paper is to present a structured methodology that allows local authorities or private companies who deal with MSW to design its own MSW management plan depending on the available data. According to these data, this paper proposes two ways of action: a direct way when detailed data are available and an indirect way when there is a lack of data and it is necessary to take into account bibliographic data. In any case, the amount of information needed is considerable. This paper combines the planning methodology with the Geographic Information Systems to present the final results in thematic maps that make easier to interpret them. The proposed methodology is a previous useful tool to organize the MSW collection routes including the selective collection. To verify the methodology it has been successfully applied to a Spanish town.     

Research for MSW flow analysis in developing nations

Developing nations have various problems regarding municipal solid waste (MSW). Therefore, to carry out a systematic review of the MSW problems in the target area and to formulate a well-considered management plan, it is extremely important to understand the present MSW flow in the region. One of the authors participated in the nine solid waste management (SWM) studies in developing nations undertaken under the technical cooperation program of the Japan International Cooperation Agency (JICA). Based on these studies, this paper reviews the results of research in developing countries regarding different MSW streams, the factors that cause the differences, and the elements considered to have the most impact on those streams. This research identifies several issues regarding MSW streams in developing nations. The MSW generation rate per capita in developing countries is generally said to grow in proportion to the GNP. However, the findings of this research show no correlation between the two; instead, there is a relationship between the GNP and the collection rate. To formulate proper future MSW management plans in countries with low collection rates, it is very important to forecast the rates of self-disposed and recycled waste, and their fluctuations. These are affected by urban structure, collection services, etc. Received: January 27, 2000 / Accepted: July 19, 2000     

Management of municipal solid waste in the Three Gorges region

As the fourth phase of the Three Gorges reservoir project commenced in 2008, the rate of water flow in the Yangtze River has obviously decelerated further downstream and water clarity within the storage facility has decreased. Meanwhile, the rate of urbanization in the region is adding to the amount of municipal solid waste (MSW) being generated by every day life. The composition of the waste is becoming more diversified and complicated, thereby presenting an increasing threat to the ecological environment and water resources of the Three Gorges region. This paper is a probe into MSW in terms of its characteristics as well as methods of storage, collection, transportation, recycling, treatment and disposal, the protection of environmental ecosystems. Municipal solid waste management (MSWM) is one of the major environmental problems in the Three Gorges region, and indeed the whole of China. Based on the analysis of the present situation of MSWM and its treatment/disposal, some methods of sorting, recycling, decomposing, incineration and reuse are described, sanitary landfill as the main disposal method in Chongqing city, incineration being the second. Sanitary landfill or dump was also used for MSW treatment in the Three Gorges region, and this paper also provides some suggestions for improving MSWM in the Three Gorges region.     

Optimal solid waste collection routes identified by the ant colony system algorithm.

In the present paper, the Ant Colony System (ACS) algorithm is used for the identification of optimal routes in the case of municipal solid waste (MSW) collection. The proposed MSW management system is based on a geo-referenced spatial database supported by a geographic information system (GIS). The GIS takes into account all the required parameters for solid waste collection. These parameters include static and dynamic data, such as the positions of waste bins, the road network and the related traffic, as well as the population density in the area under study. In addition, waste collection schedules, truck capacities and their characteristics are also taken into consideration. Spatio-temporal statistical analysis is used to estimate inter-relations between dynamic factors, like network traffic changes in residential and commercial areas. The user, in the proposed system, is able to define or modify all of the required dynamic factors for the creation of alternative initial scenarios. The objective of the system is to identify the most cost-effective scenario for waste collection, to estimate its running cost and to simulate its application. Finally, the results of the ACS algorithm are compared with the empirical method currently used by the Municipality of Athens.     

Municipal solid waste management in Pudong New Area, China

The increase in population, the rapid economic growth and the rise in community living standards accelerate municipal solid waste (MSW) generation in developing cities. This problem is especially serious in Pudong New Area, Shanghai, China. The daily amount of MSW generated in Pudong was about 1.11 kg per person in 2006. According to the current population growth trend, the solid waste quantity generated will continue to increase with the city's development. In this paper, we describe a waste generation and composition analysis and provide a comprehensive review of municipal solid waste management (MSWM) in Pudong. Some of the important aspects of waste management, such as the current status of waste collection, transport and disposal in Pudong, will be illustrated. Also, the current situation will be evaluated, and its problems will be identified.     

Alternative management structures for municipal waste collection services: The influence of economic and political factors

Identifying and characterising the factors that determine why a local authority opts for a particular way of managing its waste collection service is an important issue, warranting research interest in the field of municipal solid waste (MSW) management. This paper presents empirical evidence spanning a broad time horizon (2002–2010) showing that economic and political factors impact in different ways on the provision of waste management services. We examine five alternatives in this area, including public and private service delivery formulas and, within each field, individual and joint options. Our findings highlight the importance of the service cost and that of the various indicators of fiscal stress as determinant factors of management decisions regarding the provision of MSW management services.     

Municipal solid waste disposal in Portugal

In recent years municipal solid waste (MSW) disposal has been one of the most important environmental problems for all of the Portuguese regions. The basic principles of MSW management in Portugal are: (1) prevention or reduction, (2) reuse, (3) recovery (e.g., recycling, incineration with heat recovery), and (4) polluter-pay principle. A brief history of legislative trends in waste management is provided herein as background for current waste management and recycling activities. The paper also presents and discusses the municipal solid waste management in Portugal and is based primarily on a national inquiry carried out in 2003 and directed to the MSW management entities. Additionally, the MSW responsibility and management structure in Portugal is presented, together with the present situation of production, collection, recycling, treatment and elimination of MSW. Results showed that 96% of MSW was collected mixed (4% was separately collected) and that 68% was disposed of in landfill, 21% was incinerated at waste-to-energy plants, 8% was treated at organic waste recovery plants and 3% was delivered to sorting. The average generation rate of MSW was 1.32 kg/capita/day.     

MSW management for waste minimization in Taiwan: the last two decades

Taiwan is the second most densely populated country in the world; its 22.604 million residents (2002) live in an area of 35,967 km2 (628 people/km2). Taiwan's economy has grown rapidly during the last 20 years, resulting in a corresponding increase in the amount of municipal solid waste (MSW). This study describes and evaluates the municipal solid waste management system in Taiwan. The study's results indicate that the amount of MSW began to decline after 1997, when the government enforced aggressive MSW management policies. By 2002, total MSW production had dropped by 27%, and the average daily per capita weight of MSW had fallen from 1.14 kg in 1997 to 0.81 kg in 2002. Summarizing the successful experience of MSW reduction in Taiwan, the most important factor was the government's combining of the MSW collection system with reduction/recycling programs. The second most important factor was the policy of extended producer responsibility, which laid a foundation of recycling by producers and retailers and promoted public recycling.     

State of municipal solid waste management in Delhi, the capital of India

Delhi is the most densely populated and urbanized city of India. The annual growth rate in population during the last decade (1991-2001) was 3.85%, almost double the national average. Delhi is also a commercial hub, providing employment opportunities and accelerating the pace of urbanization, resulting in a corresponding increase in municipal solid waste (MSW) generation. Presently the inhabitants of Delhi generate about 7000tonnes/day of MSW, which is projected to rise to 17,000-25,000tonnes/day by the year 2021. MSW management has remained one of the most neglected areas of the municipal system in Delhi. About 70-80% of generated MSW is collected and the rest remains unattended on streets or in small open dumps. Only 9% of the collected MSW is treated through composting, the only treatment option, and rest is disposed in uncontrolled open landfills at the outskirts of the city. The existing composting plants are unable to operate to their intended treatment capacity due to several operational problems. Therefore, along with residue from the composting process, the majority of MSW is disposed in landfills. In absence of leachate and landfill gas collection systems, these landfills are a major source of groundwater contamination and air pollution (including generation of greenhouse gases). This study describes and evaluates the present state of municipal solid waste management in Delhi. The paper also summarizes the proposed policies and initiatives of the Government of Delhi and the Municipal Corporation of Delhi to improve the existing MSW management system.     

Municipal solid waste management in Indian cities - A review

Municipal solid waste management (MSWM) is one of the major environmental problems of Indian cities. Improper management of municipal solid waste (MSW) causes hazards to inhabitants. Various studies reveal that about 90% of MSW is disposed of unscientifically in open dumps and landfills, creating problems to public health and the environment. In the present study, an attempt has been made to provide a comprehensive review of the characteristics, generation, collection and transportation, disposal and treatment technologies of MSW practiced in India. The study pertaining to MSWM for Indian cities has been carried out to evaluate the current status and identify the major problems. Various adopted treatment technologies for MSW are critically reviewed, along with their advantages and limitations. The study is concluded with a few fruitful suggestions, which may be beneficial to encourage the competent authorities/researchers to work towards further improvement of the present system.