Size-exclusion chromatographic study of ECF and TCF softwood kraft pulp bleaching liquors

Background, aims, and scope  

Currently, elemental chlorine-free (ECF) and totally chlorine-free (TCF) bleaching systems are widely used for pulp production. Low and medium molecular weight lignin break-down products are known to have harmful effects on the environment. According to some recent results, also high molecular weight (HMW) material consisting mainly of lignin and carbohydrates may cause toxic effects to the environment. For these reasons, toxicity and structure studies of HMW materials are of great importance. This investigation is a part of a larger project to obtain more structure information of HMW materials and toxicity of ECF and TCF bleaching effluents. Size-exclusion chromatography (SEC) has been commonly used for the characterization of organic macromolecules such as lignin, but to our knowledge, no reports have appeared dealing with the comparison of SEC of ECF and TCF bleaching liquors. The aim of the present study was to get more information about the molecular weight distribution (MWD) of HMW fractions of waste liquors from ECF and TCF bleaching sequences by SEC.     

Characterization of organic matter in pristine and contaminated coastal marine sediments using solid-state 13C NMR, pyrolytic and thermochemolytic methods: a case study in the San Diego harbor area.

Chemical composition of coastal marine sedimentary organic matter (SDOM) is a function of natural and anthropogenic inputs to the system. In this study a combination of analytical techniques: 13C nuclear magnetic resonance (NMR), pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and tetramethylammonium hydroxide thermochemolysis-gas chromatography/mass spectrometry (TMAH thermochemolysis-GC/MS) were used to study the contribution of hydrophobic organic contaminants and terrestrial OM to the SDOM. Sediments were collected from two sites in the San Diego Bay: Paleta Creek, which is contaminated, and Coronado Cayes, which is relatively pristine. Concentrations of polycyclic aromatic hydrocarbons (PAHs) at both sites, as determined by ultrasonically assisted lipid extraction are found to be higher in the surface layer, to generally decrease with depth, and to be present at about two orders of magnitude higher concentration at the contaminated site as compared to the pristine site. The sediment samples were partially deashed with HF/HCI treatment before further analysis. 13C-NMR spectra of the Paleta Creek samples show a higher aromatic carbon content and a distinct phenolic carbon peak. This suggests a large input from terrestrial carbon (lignin). Data from both Py-GC/MS and TMAH thermochemolysis-GC/MS support this and indicate the presence of lignin-derived residues, primarily of the guaiacyl type at the contaminated site. In contrast, SDOM at the Coronado Cayes site exhibits less terrestrial input. In general, the SDOM resembles soil OM rather than typical marine SDOM. Chemical analyses of the lipid-extracted, partially deashed sediments, does not reveal the presence of any PAHs.     

Feasibility of soil dust source apportionment by the pyrolysis-gas chromatography/mass spectrometry method

This study tested the feasibility of using pyrolysis (Py)-gas chromatography (GC)/mass spectrometry (MS) to obtain organic chemical species data suitable for source apportionment modeling of soil-derived coarse particulate matter (PM10) dust on ambient filters. A laboratory resuspension apparatus was used with known soils to generate simulated receptor filter samples loaded with approximately 0.4 mg of PM10 dust, which is within the range of mass loading on ambient filters. Py-GC/MS at 740 degrees C generated five times more resolvable compounds than were obtained with thermal desorption GC/MS at 315 degrees C. The identified compounds were consistent with literature from Py experiments using larger samples of bulk soils. A subset of 91 organic species out of the 178 identified Py products was used as input to CMB8 software in a demonstration of source apportionment using laboratory-generated mixtures simulating ambient filter samples. The 178 quantified organic species obtained by Py of soil samples is an improvement compared with the 38 organic species obtained by thermal desorption of soils and the four functionally defined organic fractions reported by thermal/ optical reflectance. Significant differences in the concentration of specific species were seen between samples from different sites, both geographically distant and close, using analysis of variance and cluster analysis. This feasibility study showed that Py-GC/MS can generate useful source profile data for receptor modeling and justifies continued method development.     

Feasibility of Soil Dust Source Apportionment by the Pyrolysis-Gas Chromatography/Mass Spectrometry Method

Abstract

This study tested the feasibility of using pyrolysis (Py)-gas chromatography (GC)/mass spectrometry (MS) to obtain organic chemical species data suitable for source apportionment modeling of soil-derived coarse particulate matter (PM₁₀) dust on ambient filters. A laboratory resuspension apparatus was used with known soils to generate simulated receptor filter samples loaded with ～0.4 mg of PM₁₀ dust, which is within the range of mass loading on ambient filters. Py-GC/MS at 740 °C generated five times more resolvable compounds than were obtained with thermal desorption GC/MS at 315 °C. The identified compounds were consistent with literature from Py experiments using larger samples of bulk soils. A subset of 91 organic species out of the 178 identified Py products was used as input to CMB8 software in a demonstration of source apportionment using laboratory-generated mixtures simulating ambient filter samples. The 178 quantified organic species obtained by Py of soil samples is an improvement compared with the 38 organic species obtained by thermal desorption of soils and the four functionally defined organic fractions reported by thermal/optical reflectance. Significant differences in the concentration of specific species were seen between samples from different sites, both geographically distant and close, using analysis of variance and cluster analysis. This feasibility study showed that Py-GC/MS can generate useful source profile data for receptor modeling and justifies continued method development.     

Copper and cadmium complexation by high molecular weight materials of dominant microalgae and of water from a eutrophic reservoir

High molecular weight materials (HMWM, >12000-14000 Da) excreted by the two cyanophyte species (Microcystis aeruginosa and Anabaena spiroides) and a diatom (Aulacoseira granulata) which are dominant phytoplankton species in a eutrophic reservoir, Barra Bonita, Brazil were investigated as copper (Cu) and cadmium (Cd) complexation agents and their monosaccharide and elemental analysis of C, H, N and S determined. Also, HMWM obtained from the reservoir water as well as from a mixture of the three algae materials were studied. The HMWM of the cyanophytes and the mixture of the three algae materials complexed Cu and Cd, whereas the HMWM of the diatom and that from the reservoir water complexed only Cu. Two classes of ligands of intermediate to weak binding strength were obtained after Scatchard plot analysis of the titration data. The cyanophytes and the mixture HMWM presented higher conditional stability constants for Cu class-1 ligands (logK1' = 9.2-9.5) than the HMWM derived from the diatom and the reservoir water (logK1' = 8.6-8.8). Higher proportions of acidic monosaccharides corresponded to higher K1' of Cu and Cd complexation, yet no relation was observed among complexation parameters and elemental analysis. This study points out Cu ligands of intermediate to weak binding strength in the excreted HMWM of dominant microalgae and in the HMWM of the reservoir water, while Cd was solely complexed by ligands isolated from the cyanophyte HMWM.     

Distribution and incorporation mode of the herbicide MCPA in soil derived organo-clay complexes

The incorporation of xenobiotics into soil, especially via covalent bonds or sequestration has a major influence on the environmental behavior including toxicity, mobility, and bioavailability. The incorporation mode of 4-chloro-2-methylphenoxyacetic acid (MCPA) into organo-clay complexes has been investigated under a low (8.5 mg MCPA/kg soil) and high (1000 mg MCPA/kg soil) applied concentration, during an incubation period of up to 120 days. Emphasis was laid on the elucidation of distinct covalent linkages between non-extractable MCPA residues and humic sub-fractions (humic acids, fulvic acids, and humin). The cleavage of compounds by a sequential chemical degradation procedure (OH^?, BBr₃, RuO₄, TMAH thermochemolysis) revealed for both concentration levels ester/amide bonds as the predominate incorporation modes followed by ether linkages. A possible influence of the soil microbial activity on the mode of incorporation could be observed in case of the high level samples. Structure elucidation identified MCPA as the only nonextractable substance, whereas the metabolite 4-chloro-2-methylphenol was additionally found as bioavailable and bioaccessible compound.     

The conversion of chicken manure to biooil by fast pyrolysis II. Analysis of chicken manure, biooils, and char by curie-point pyrolysis-gas chromatography/mass spectrometry (Cp Py-GC/MS)

The initial chicken manure and the three fractions derived from it by fast pyrolysis, that is, the two biooils Fractions I and II as well as the residual char were analyzed by Curie-point pyrolysis-gas chromatography/mass spectrometry (Cp Py-GC/MS). The individual compounds identified were grouped into the following six compound classes: (a) N-heterocyclics; (b) substituted furans; (c) phenol and substituted phenols; (d) benzene and substituted benzenes; (e) carbocyclics; and (f) aliphatics. Of special interest were the relatively high concentrations of N-heterocyclics in biooil Fraction II which was obtained in the highest yield and had the highest calorific value. Prominent N-heterocyclics in biooil Fraction II were methyl-and ethyl-substituted pyrroles, pyridines, pyrimidine, pyrazines, and pteridine. Also noteworthy was the high abundance of aliphatics in biooil Fraction I and the char. The alkanes and alkenes in biooil Fraction I ranged from n-C7 to n-C18 and C7:1 to C18:1, respectively, and those in the char from n-C7 to n-C19 and C7:1 to C19:1, respectively. The N-heterocyclics in the two biooil Fractions came from the chicken manure, from proteinaceous materials during fast pyrolysis or were formed during the fast pyrolysis manure conversion by the Maillard reaction which involved the formation of N-heterocyclics by amino acids interacting with sugars.     

Pyrolysis of humic acids from digested and composted sewage sludge

Humic acids (HAs) were extracted from four digested sewage sludge samples composted for four months, one, two and four years. HAs were pyrolyzed at three different temperatures applying both conventional and in situ methylation (ISM) pyrolysis. The pyrolysates were analyzed using gas chromatography-mass spectrometry (GC/MS). Derivatization (ISM) and pyrolysis temperature had dramatic effects on the composition and relative amounts of the pyrolysates. Among the derivatized HA fragments aliphatic compounds prevailed under all the pyrolysis conditions tested. Aromatic substances consisting mainly of guaiacyl-type compounds were detected in higher abundances only at elevated temperatures. Without ISM the contribution of aromatic structures to the total pyrogram was considerably greater than that of the aliphatics. Increase of the pyrolysis temperature from 450 degrees C to 600 degrees C had smaller effect on the proportions and composition of the compounds studied than increase from 350 degrees C to 450 degrees C.     

Development and validation of a GC/MS method for determination of phenolic xenoestrogens in aquatic samples

A simple and sensitive GC/MS method for the quantitative determination of the estrogenic phenolic compounds 4-nonylphenol, 4-t-octylphenol, bisphenol A, 3-t-butyl-4-hydroxyanisole, 2-t-butyl-4-methylphenol, 4-hydroxybiphenyl, 2-hydroxybiphenyl, 4-chloro-3-methylphenol, and 4-chloro-2-methylphenol in aquatic samples was developed. The method for assessing their occurrence in sewage, surface and drinking waters consists of solid phase extraction (SPE) using a polystyrene copolymer phase. After methylation of the extract HRGC/LRMS analysis was possible without any clean up, even in raw sewage samples. Limits of detection and determination were between <0.01 and 0.05 ng/l and 0.01 and 0.05 ng/l, respectively. Recoveries were above 70% with exception of 3-t-butyl-4-hydroxyanisole.     

Evaluation of surrogate measures of cadmium, lead, and zinc bioavailability to Eisenia fetida

We evaluated weak-electrolyte (0.1 M Ca(NO3)2) soil extractions and ion-exchange membranes coated with a metal chelator as measures of Cd, Pb, and Zn bioavailability in spiked artificial soil by comparing their metal availability estimates to acute lethal toxicity in the earthworm Eisenia fetida. Ca(NO3)2 extractions were precisely related to toxicity in all toxicity tests, and enabled the development of time-independent LC50S (incipient lethal-levels, ILLs) calculated using exposure levels based on extraction data. ILLs with 95% CIs for the Cd, Pb, and Zn toxicity tests were 9.8 (9.4-10.3), 1.16 (1.11-1.22), and 6.33 (6.18-6.49) Ca(NO3)2-extractable mmol metal/kg soil, respectively. Mixture toxicity of Cd, Pb, and Zn, assessed using the toxic unit (TU) approach, was 1.35 TU, suggesting additivity. Chelating ion-exchange membrane uptake was variable, and not well related to toxicity. Weak-electrolyte extractions show promise as precise, inexpensive surrogate measures of Cd, Pb, and Zn bioavailability in soil.     

The conversion of chicken manure to biooil by fast pyrolysis II. Analysis of chicken manure,biooils, and char by curie-point pyrolysis-gas chromatography/mass spectrometry (Cp Py-GC/MS)

The initial chicken manure and the three fractions derived from it by fast pyrolysis, that is, the two biooils Fractions I and II as well as the residual char were analyzed by Curie-point pyrolysis-gas chromatography/mass spectrometry (Cp Py-GC/MS). The individual compounds identified were grouped into the following six compound classes: (a) N-heterocyclics; (b) substituted furans; (c) phenol and substituted phenols; (d) benzene and substituted benzenes; (e) carbocyclics; and (f) aliphatics. Of special interest were the relatively high concentrations of N-heterocyclics in biooil Fraction II which was obtained in the highest yield and had the highest calorific value. Prominent N-heterocyclics in biooil Fraction II were methyl-and ethyl-substituted pyrroles, pyridines, pyrimidine, pyrazines, and pteridine. Also noteworthy was the high abundance of aliphatics in biooil Fraction I and the char. The alkanes and alkenes in biooil Fraction I ranged from n-C₇ to n-C₁₈ and C_7:1 to C_18:1, respectively, and those in the char from n-C₇ to n-C₁₉ and C_7:1 to C_19:1, respectively. The N-heterocyclics in the two biooil Fractions came from the chicken manure, from proteinaceous materials during fast pyrolysis or were formed during the fast pyrolysis manure conversion by the Maillard reaction which involved the formation of N-heterocyclics by amino acids interacting with sugars.     

化学物质对发光菌的联合毒性评价方法

毒性单位法(TU)的理论基础来源于剂量加和模型(DA),目前仅在二元联合毒性评价中广泛应用。为了确定TU模型适合评价的混合物类型,实验选取5种剂量效应曲线类型不同的物质,采用微板光度计测试了一元、二元混合物对发光菌青海弧菌-Q67(Vibrio-qinghaiensis sp.-Q67)的急性毒性。根据物质的剂量效应曲线形状将物质分为A、B、C 3类,利用毒性单位法(TU)和联合作用定义法分别对AA类、AB类、AC类、BC类混合物进行分析。结果表明,TU法仅适合于由剂量效应曲线接近直线的物质组成的混合物进行联合毒性的评价。以效应为基准、TU模型为框架建立了TU’模型,该模型可以满足对任何类型已知成分的混合物或者未知成分的实际水样之间的多元联合作用的评价。     

Combined application of non-discriminated conventional pyrolysis and tetramethylammonium hydroxide-induced thermochemolysis for the characterization of the molecular structure of humic acid isolated from polluted sediments from the Ravenna Lagoon

Humic acid (HA) isolated from highly polluted sediment from the Ravenna Lagoon (Italy) was subjected to pyrolysis/tetramethylammonium hydroxide (TMAH)-induced thermochemolysis to reveal the impact of industrial activities on humification. Special effort was made to distinguish between analytes originating from the polymeric humic organic matter network along with sequestered compounds (which cannot be released by solvent extraction), and the solvent-extractable lipid fraction sorbed onto the organic matrix. Exhaustive solvent extraction of the isolated HA proved mandatory to avoid biased results when identifying the origin of the pyrolyzates of untreated samples. Conventional pyrolysis at 750 degrees C of the "degreased" HA revealed a characteristic polycyclic aromatic hydrocarbon (PAH) pattern, which was significantly different than patterns obtained from the pyrolysis of natural humic acids. TMAH-induced thermochemolysis at 500 degrees C provided information on carboxylic acids covalently bound inside the HA network via ester bonds. Thermochemolysis of the "degreased" matrix at 750 degrees C, resulting in the cleavage of C-O and C-C bonds, revealed a significant PAH pattern very similar to that obtained by conventional pyrolysis. The uncommon PAH pattern points to the formation of bound residues as the humification/detoxification pathway. Recalcitrant hopane hydrocarbons showed very similar patterns for both the untreated and exhaustively solvent-extracted samples, which points to hopanes being linked inside the humic network via C-C bonds. The technique of non-discriminating flash pyrolysis used in this study, based on extremely rapid capacitive discharge heating in a Silcosteel capillary, proved to be an excellent method to obtain high-boiling pyrolyzates (PAHs beyond 252Da molecular weight, C(29)-C(31)-hopanes).     

Studies on the coupling product between oxidation products derived from pentachlorophenol and cyclodextrins

The coupling products (CPs), which were formed via the peroxosulfate catalyzed oxidation of pentachlorophenol (PCP) with iron(III)-tetrakis(sulfonatophenyl)porphyrin (Fe(III)-TPPS) in the presence of hydroxypropyl-beta -cyclodextrin (HP-beta -CD) or HP-gamma -CD, were separated by ultrafiltration from the reaction mixture. When the percentages of chlorine species in the reaction mixture were calculated from the concentrations of organic chlorine in the reaction mixture and CPs, 10-25% of chlorine species in the reaction mixture was organic chlorine that was incorporated into CDs. Analyses of the CPs by pyrolysis-GC/MS (Py-GC/MS) and 13C NMR showed that the PCP-derived products were covalently incorporated into the CDs. To evaluate the acute toxicity of the CPs, a Microtox test was examined. Toxicities of the CPs were reduced slightly, compared to the controls (PCP alone and PCP + reaction blanks). In the reaction blanks, mesaconic acid (MA) moieties were detected as a result of the oxidation of CDs in the absence of PCP. Thus, factors in the toxicities, detected in the CPs, can be attributed to the oxidation products derived from CDs, such as MA, as well as the PCP-derived products incorporated into the CDs.     

润滑油废白土的热解处理

以润滑油废白土为原料,利用电热解法,研究了热解终温、加热速率和CaO添加量对热解产物的影响。实验结果表明:热解终温对热解产物的影响最为显著。随着热解终温的升高,不凝气产量和产油率均迅速增加。当热解终温达到600℃时,其增加的速率逐渐缓慢增大。当控制热解终温为800℃、加热速率为16℃/min、CaO添加量为0.5%时,富氢气体产量为189.2 L/kg,气体中主要成分为H2和CH4,其含量分别为27.97%和41.64%;热解残渣含油率和重金属溶出物均低于标准规定值,热解油产率为10.98%,回收率为38.94%,其主要成分为汽油、柴油和重油3部分组成,分别含19.13%、31.35%和49.52%。     

Studies on the Coupling Product between Oxidation Products Derived from Pentachlorophenol and Cyclodextrins

The coupling products (CPs), which were formed via the peroxosulfate catalyzed oxidation of pentachlorophenol (PCP) with iron(III)-tetrakis(sulfonatophenyl)porphyrin (Fe(III)-TPPS) in the presence of hydroxypropyl-β -cyclodextrin (HP-β -CD) or HP-γ -CD, were separated by ultrafiltration from the reaction mixture. When the percentages of chlorine species in the reaction mixture were calculated from the concentrations of organic chlorine in the reaction mixture and CPs, 10–25% of chlorine species in the reaction mixture was organic chlorine that was incorporated into CDs. Analyses of the CPs by pyrolysis-GC/MS (Py-GC/MS) and ¹³C NMR showed that the PCP-derived products were covalently incorporated into the CDs. To evaluate the acute toxicity of the CPs, a Microtox® test was examined. Toxicities of the CPs were reduced slightly, compared to the controls (PCP alone and PCP + reaction blanks). In the reaction blanks, mesaconic acid (MA) moieties were detected as a result of the oxidation of CDs in the absence of PCP. Thus, factors in the toxicities, detected in the CPs, can be attributed to the oxidation products derived from CDs, such as MA, as well as the PCP-derived products incorporated into the CDs.     

Comparative toxicity of effluents processed by different treatments in V79 fibroblasts and the algae Selenastrum capricornutum

The efficacy of ozonation and of photocatalysis processing in the treatment of pulp mill ECF (elementary chlorine free) bleaching and textile effluents was evaluated by determining total organic carbon reduction (TOC) and the toxicity. The chronic toxicity of the effluents was evaluated by the ability to inhibit the growth of algae Selenastrum capricornutum. Cultured hamster V79 fibroblasts were used to assess the cytotoxicity of effluents submitted to different detoxification processes. Two endpoints were measured in V79 cells: 3-(4,5-dimethylthiazole-2-yl)-2,5-biphenyl tetrazolium bromide (MTT) reduction and neutral red uptake (NRU). Both treatment processes were able to reduce the TOC, although ozonization was less effective for pulp mill ECF bleaching. The pulp mill ECF bleaching and textile effluents reduced the growth of S. capricornutum by 39% and 27%, respectively. However, at the highest concentration tested, the textile effluents treated by photochemical process for 60 min showed increased cytotoxicity in V79 cells compared to the untreated effluent when assessed by the NRU and MTT reduction assays (increases of 30% and 40%, respectively). Pulp mill ECF bleaching effluent treated by ozonization had a similar cytotoxicity to that of untreated effluent in the NRU assay. In contrast, the MTT reduction assay indicated that effluents treated with ozone were around 20% more cytotoxic than untreated effluents. These results show that cultured fibroblasts may be useful for studying cellular responses to pollutants and may be included in tests to monitor the efficiency of effluent detoxification processes.     

Bio-syngas production with low concentrations of CO2 and CH4 from microwave-induced pyrolysis of wet and dried sewage sludge

This paper assesses the feasibility of producing syngas from sewage sludge via two pyrolysis processes: microwave-induced pyrolysis (MWP) and conventional pyrolysis (CP). The changes in the composition of the produced gas as a function of the pyrolysis treatment and the initial moisture content of the sludge were evaluated. It was found that MWP produced a gas with a higher concentration of syngas than CP, reaching values of up to 94vol%. Moreover, this gas showed a CO2 and CH4 concentration around 50% and 70%, respectively, lower than that obtained in the gas from CP. With respect to the effect of moisture on gas composition, this was more pronounced in CP than in MWP. Thus, the presence of moisture increases the concentration of H2 and CO2 and decreases that of CO, especially when CP was used. In order to elucidate the behaviour of CO2 during the pyrolysis, the CO2 gasification kinetics of the char obtained from the pyrolysis were investigated. It was established that in microwave heating the gasification reaction is much more favoured than in conventional heating. Therefore, the low concentration of CO2 and the high concentration of CO in the microwave pyrolysis gas could be due to the self-gasification of the residue by the CO2 produced during the devolatilization of the sewage sludge in the pyrolysis process.     

Acute and Chronic Toxicity of Chlorine Dioxide (ClO2) and Chlorite (ClO2ˉ) to Rainbow Trout (Oncorhynchus mykiss) (4 pp)

Goal, Scope and Background Chlorite (ClO2ˉ) is a primary decomposition product when chlorine dioxide (ClO2) is added during water treatment; therefore the toxic effects of both compounds on aquatic organisms are possible. Limited data are available concerning their toxicity to fish. The aim of this study was to investigate sensitivity of rainbow trout to acute and chronic toxicity of chlorine dioxide and chlorite, and to estimate the Maximum-Acceptable-Toxicant-Concentration (MATC) of those compounds in fish. Methods The acute and chronic toxicity of chlorine dioxide and chlorite to larval and adult rainbow trout was investigated in 96-hour to 20-day laboratory exposures evaluating the wide range spectrum of biological indices under semi-static conditions. Results and Discussion Median lethal concentration (96-hour LC50) values derived from the tests were: 2.2 mg/l for larvae; 8.3 mg/l for adult fish and 20-day LC50 for larvae was 1.6 mg/l of chlorine dioxide, respectively. Chlorite was found to be from 48 to 18 times less acutely toxic to larvae and adult fish, correspondingly. Both chemical compounds induced similar toxic effects in rainbow trout larvae during chronic tests (they affected cardio-respiratory and growth parameters), but chlorine dioxide had a higher toxic potency than chlorite. A significant decrease in the heart rate and respiration frequency of larvae was established. However, within an increase in exposure duration recovery of cardio-respiratory responses was seen to have occurred in larvae exposed to chlorite. Meanwhile, in larvae exposed to chlorine dioxide, a significant decrease in cardio-respiratory responses remained during all 20-day chronic bioassays. Chlorine dioxide also more strongly affected growth parameters of rainbow trout larvae at much lower test concentrations. Decreased rate of yolk-sack resorption occurred only in the tests with chlorine dioxide. Conclusions Maximum-Acceptable-Toxicant-Concentration (MATC) of 0.21 mg/l for chlorine dioxide and of 3.3 mg/l for chlorite to fish was derived from chronic tests based on the most sensitive parameter of rainbow trout larvae (growth rate). According to substance toxicity classification accepted for Lithuanian inland waters, chlorine dioxide and chlorite can be referred to substances of \moderate\ toxicity to fish. Recommendations and Outlook Due to its very reactive nature, chlorine dioxide is rapidly (in a few hours) reduced to chlorite, which is persistent also as a biocide but 16 times less toxic to fish, according to MATC. Therefore, it is much more likely that fish will be exposed to chlorite than to chlorine dioxide in natural waters. Presently accepted, the Maximum-Permitted-Concentration of total residual chlorine (TRC) in waste-water discharging into receiving waters is 0.6 mg/l. If this requirement will not be exceeded, it is unlikely that fish would be exposed to lethal or even to sublethal concentrations of chlorine dioxide or chlorite. Furthermore, chlorine dioxide does not generate toxic nitrogenous (chloramines) or carcinogenic organic residuals (trihalomethanes). All these properties make chlorine dioxide a more promising biocide than chlorine.     

Evaluation of biodegradation of nonylphenol ethoxylate and lignin by combining toxicity assessment and chemical characterization

The aerobic biodegradation of commercial nonylphenol ethoxylate (NPE) mixture and alkali lignin was studied using the OECD headspace test accompanied by the simultaneous measurement of ecotoxicity directly from the biodegradation liquors and by the follow-up of the chemical composition of the studied chemicals. NPE degradation was dependent on the inoculum source: approximately 40% of NPE was mineralized into CO₂ during the 4-week experiment when inoculum from Helsinki City wastewater treatment plant (WWTP) was used, and only 12% was mineralized when inoculum from Jyväskylä City WWTP was used. Chemical analyses revealed a shift in the ethoxylate chain length from longer to shorter soon after the beginning of the NPE biodegradation tests. At the same time also toxicity (reverse electron transport assay, RET) and estrogenic activity (human estrogen receptor yeast) measured directly from the biodegradation liquors decreased. In case of alkali lignin, approximately 11% was mineralized in the test and chemical analysis showed in maximum a 30% decrease in lignin concentration. Toxicity of lignin biodegradation liquors started to decrease in the beginning of the test, but became more toxic towards the end of the test again. Especially RET assay proved to be sensitive enough for measuring toxicity changes directly from biodegradation liquors, although a concentrating treatment of the liquors is recommended for a more detailed characterization and identification of toxic metabolites.