New approaches for assessment of occupational exposure to metals using on-site measurements

Traditional assessment of occupational exposure to metals typically involves static or personal aerosol sampling on a membrane filter followed by a laboratory determination of the metal content on the filter sample. These techniques give results with high accuracy and low detection limits. However, they all have a drawback in that, since the samples have to be analysed in a laboratory, the results will usually be obtained days or weeks after the sampling took place. Today there is available a new generation of portable electronic micro-balances and instruments for metal analysis based on X-ray fluorescence. These instruments will make on-site measurements of metal exposure possible, which opens the way for new approaches for assessment of occupational exposure to metals. In combination with high-flow pumps, short-term sampling is possible, which allows monitoring of the exposure variation during a work shift as well as the exposure during individual work tasks of short duration. Screening measurements and emission measurements are other examples of monitoring that are facilitated using on-site determinations. Measure control monitoring can effectively be performed using on-site measurements and is an effective tool in the assessment of workplace improvements. On-site determinations can also form an effective and pedagogic tool showing workers how to perform specific tasks and demonstrating the effectiveness of different measures intended to improve their work environment. Other examples are the assessment of skin exposure using aerosol deposition on pads and screening of contamination using bulk samples.     

Detection and quantification of Cladosporium in aerosols by real-time PCR

Cladosporium is one of the most common airborne molds found in indoor and outdoor environments. Cladosporium spores are important aeroallergens, and prolonged exposure to elevated spore concentrations can provoke chronic allergy and asthma. To accurately quantify the levels of Cladosporium in indoor and outdoor environments, two real-time PCR systems were developed in this study. The two real-time PCR systems are highly specific and sensitive for Cladosporium detection even in a high background of other fungal DNAs. These methods were employed to quantify Cladosporium in aerosols of five different indoor environments. The investigation revealed a high spore concentration of Cladosporium (10(7) m(-3)) in a cow barn that accounted for 28-44% of the airborne fungal propagules. In a countryside house that uses firewood for heating and in a paper and pulp factory, Cladosporium was detected at 10(4) spores m(-3), which accounted for 2-6% of the fungal propagules in the aerosols. The concentrations of Cladosporium in these three indoor environments far exceeded the medical borderline level (3000 spores m(-3)). In a power station and a fruit and vegetable storage, Cladosporium was found to be a minor component in the aerosols, accounted for 0.01-0.1% of the total fungal propagules. These results showed that monitoring Cladosporium in indoor environments is more important than in outdoor environments from the public health point of view. Cladosporium may not be the dominant fungi in some indoor environments, but its concentration could still be exceeding the threshold value for clinical significance. The methods developed in this study could facilitate accurate detection and quantification of Cladosporium for public health related risk assessment.     

Sampling and analysis considerations for the determination of hexavalent chromium in workplace air

Airborne hexavalent chromium (Cr[VI]) is a known human respiratory carcinogen and allergen. Workers in a variety of industries may be exposed to airborne hexavalent chromium, with exposures frequently occurring via inhalation and/or dermal contact. Analytical methods for the measurement of Cr(VI) compounds in workplace samples, rather than for the determination of total elemental chromium in workplace air, are often desired because exposure limit values for Cr(VI) compounds are much lower than for total Cr. For years, sampling and analytical test methods for airborne Cr(VI) have been investigated so as to provide means for occupational exposure assessment to this highly toxic species. Inter-conversion of trivalent chromium (Cr[III]) and Cr(VI) can sometimes occur during sampling and sample preparation, and efforts to minimize unwanted redox reactions involving these chromium valences have been sought. Because of differences in toxicity, there is also interest in the ability to differentiate between water-soluble and insoluble forms of Cr(VI), and procedures that provide solubility information concerning Cr(VI) compounds have been developed. This paper reviews the state of the art concerning the measurement of airborne Cr(VI) compounds in workplace aerosols and related samples.     

Data needs for occupational epidemiologic studies

Data needs in an epidemiologic study can appear to be substantial in light of the other responsibilities of an industrial hygienist. Many of the data needed for this type of investigation, however, are already collected for other exposure assessment purposes. To increase understanding of this concept, the data needs for the major purposes for conducting an exposure assessment are identified. The purposes include determining compliance; implementing industrial hygiene programs, such as personal protective and respiratory equipment, hazard communication training, and medical surveillance; investigating health complaints and worker concerns; investigating tasks or engineering control effectiveness; investigating toxic tort or worker compensation claims; and conducting epidemiologic studies. A comprehensive exposure assessment system is then described that incorporates the data needs for all these purposes, including epidemiologic studies. The data needs of epidemiologic studies and how the data are used are then described and illustrated with examples taken from published epidemiologic studies.     

Biological monitoring versus air monitoring strategies in assessing environmental-occupational exposure

Assessment of environmental and occupational exposure to chemicals can be performed with environmental monitoring (EM) and biological monitoring (BM). Biological monitoring was for a long time considered as a method complementary to environmental monitoring. At present this attitude is changing and in certain areas biological monitoring is applied as the method of choice for exposure and health-risk assessment. This paper examines advantages and disadvantages of those two approaches. In occupational settings environmental monitoring of exposure to VOCs seems to be superior to biological monitoring (possibility of simultaneous determination of components of mixtures, simple interpretation, possibility of evaluation of short-term exposure to local irritants). In the case of this group of compounds BM can be useful in selected cases such as evaluation of dermal absorption or efficiency of protective measures. In the case of metals both forms of monitoring can be used depending on the available methods for interpretation of results. BM of exposure may be considered as superior for evaluating the effects of exposure to lead, cadmium and mercury. However, quantitative evaluation of cancer risk after exposure to arsenic or chromium is possible only on the basis of determination in the air and the use of unit risk values. Both environmental and biological monitoring are useful for evaluation of occupational and environmental exposure to polycyclic aromatic hydrocarbons (PAHs). In certain areas such as evaluation of exposure to external tobacco smoking, cytostatic drugs, and pesticides, biological monitoring is the method of choice used for individual exposure assessment or tracing the trends of environmental exposure.     

国内外优先评估化学品筛选方法与清单概述

优先评估化学品名录对推进有毒有害化学品的管控、保护环境和人类健康具有重要意义。综述了国内外优先评估化学品筛选方法的发展、原则和步骤,总结了筛选评估流程中重点关注的多种危害特性,比较了各国优先评估化学品名录及其在各国/组织的禁止/限制情况,并分析其在我国的生产状况。结果表明,各国家/组织共筛选出1 146种优先评估化学品,有239种在至少2个国家/组织中被列为优先评估化学物质,有208种在我国生产使用,但其中164种尚未列入我国优控化学品名录,可作为下一步风险评估的对象。邻苯二甲酸二（2-乙基己基）酯（DEHP）被所有国家/组织列为优先关注化学品,接下来应严格管控塑料制品中的DEHP,或寻找合适的替代物。研究可为我国优先评估化学品的筛选与环境管理提供参考。     

Bioaerosol exposure assessment in the workplace: the past, present and recent advances

Louis Pasteur described the first measurements of airborne microorganisms in 1861. A century later, the inhalation of spores from thermophilic microorganisms was shown to induce attacks of farmers' lung in patients with this disease, while endotoxins originating from Gram-negative bacteria were identified as causal agents for byssinosis in cotton workers. Further epidemiological and toxicological studies have demonstrated inflammatory, respiratory, and pathogenic effects following exposure to bioaerosols. Exposure assessment is often confounded by the diversity of bioaerosol agents in the environment. Microorganisms represent a highly diverse group that may vary in toxicity. Fungi and bacteria are mainly quantified as broad groups using a variety of viable and nonviable assessment methods. Endotoxins and β(1 → 3)-glucans are mainly measured by their activity in the Limulus amebocyte lysate assay, enzymes by immuno-chemical methods and mycotoxins by liquid chromatography-mass spectrometry. Few health-based occupational exposure limits (OELs) are available for risk assessment. For endotoxins, a health-based OEL of 90 endotoxin units m(-3) has been proposed in the Netherlands. A criteria document for fungal spores recently proposed a lowest observed effect level of 100,000 spores m(-3) for non-pathogenic and non-mycotoxin producing species based on inflammatory respiratory effects. Recent developments in bioaerosol assessment were presented at the Organic Dust Troms? Symposium including molecular biological methods for infectious agents and organisms that are difficult to cultivate; studies of submicronic and hyphal fragments from fungi; the effect of biodiversity of microorganisms in asthma studies; and new/improved measurement methods for fungal antigens, enzymes and allergens. Although exposure assessment of bioaerosol agents is complex and limited by the availability of methods and criteria, the field is rapidly evolving.     

我国污染场地土壤石油烃环境质量标准体系的现状与趋势

石油烃污染场地已经成为国内外重点关注的工业污染场地类型之一。国内基于人体健康风险的污染场地管理模式及分层次评估方法已经展现雏形,为风险管理者提供了基于人体健康的土壤石油烃风险筛选值和管制值,也为污染场地的防治与修复工作提供了决策支持。在前人研究的基础上,梳理了国内土壤环境质量标准体系的建立与发展历程,分析了石油烃类污染物检测方法的现状与未来发展趋势,并着重对比与分析了各标准制订的石油烃及其指示化合物的风险评估筛选值。目前面临的关键问题:①完善石油烃监测指标体系及分析方法是精准获得风险评估结果的前提。现有石油烃馏分指标划分较为宽泛,有必要参考国外先进标准体系,逐渐完善石油烃馏分指标划分及其配套的定量分析方法。②新颁布的国家建设用地土壤污染风险管控标准在前期场地调查中具有一定的普遍适用性,但是考虑到地域建筑物参数、人群暴露参数等的差异性,在后期场地调查中还需要因地制宜地制定适合污染场地的具体修复目标值,并针对关键性参数作定量化解析。     

Field application of SPME as a novel tool for occupational exposure assessment with inhalational anesthetics

Occupational exposure to inhalational anesthetics occurs routinely in operating rooms. It could induce serious health hazards and diseases. This exposure assessment is a crucial step in determining risks. In this study, a pen-shaped holder for solid-phase microextraction (SPME) sampler was successfully applied as a time-weighted average sampling tool for workshift exposure assessment of operation room staff to halothane. It proved to be very convenient for use in occupational environments such as operation rooms. Samples were analyzed by a gas chromatography-mass spectrometry. The validity of the SPME method was checked in real-world conditions with Occupational Safety and Health Administration (OSHA) 103 standard method for the determination of inhalational anesthetics. A good agreement between OSHA 103 and SPME methods was obtained and results demonstrated no statistically significant differences in anesthetic concentrations determined by the two analytical methods (p?≥?0.05). It is concluded that SPME in retracted mode could successfully be applied in occupational exposure assessment purposes.     

基于双指标多等级的土壤重金属生态风险评价

采用土壤中重金属的全量和有效态双重指标,建立基于多等级综合评估的土壤中重金属生态风险评价模型,将联合概率曲线法引入土壤评价模型,分析重金属暴露浓度与毒性数据的概率分布,考察重金属对土壤生物的毒害程度,从而确定土壤中重金属对于生态系统的风险。建立从简单到复杂的多等级综合评价方法,表征重金属的污染等级、浓度效应、多种重金属污染物的协同效应、不同重金属的毒性效应和土壤对不同重金属污染物的敏感性。选择典型地区采集有代表性的土壤样品,测定不同重金属的总量和有效态,验证评价模型的实用性和评价分级的合理性。旨在解决土壤重金属风险评价的方法学问题,为土壤环境质量管理提供支持。     

Assessment of exposure to lead of the general population in the European Community through biological monitoring

The more than 10 years concern for lead in the European Community from the environmental and workplace point fo view, have lead to the adoption of a number of Directives limiting human exposure to head.Furthermore a Directive on the Biological screening of the population for lead was adopted in 1977 to obtain an overall assessment of the exposure to lead of the general population. The results of this assessment are presented.     

A Landscape Ecology Assessment of the Tensas River Basin

A group of landscape ecological indicators were applied to biophysical data masked to the Tensas River Basin. The indicators were used to identify and prioritize sources of nutrients in a Mississippi/Atchafalaya River System sub-basin. Remotely sensed data were used for change detection assessment. With these methods, we were able to look at land use practices over the past twenty years in the Tensas River Basin of Louisiana. A simple land use classification was applied to multispectral scanner (MSS) data from 1972 and 1991. The landscape analysis methods described in this paper will show how to use these methods to assess the impact of human land use practices that are being implemented to improve environmental quality. Landscape assessment methods can be used as a simple, timely, cost effective approach for monitoring, targeting, and modeling ecosystem health in watersheds. Although this study was conducted in the southeast, the methods described in this paper may be applicable to western landscapes.     

基于健康风险的三氯杀螨醇生产设备表面污染物筛选值推算的初步研究

运用确定性和概率性人体健康风险评估的方法,推算一般工业暴露情景和拆卸清理暴露情景下三氯杀螨醇生产设备表面污染物的筛选值.结果表明:p,p'-滴滴涕、p,p'-滴滴滴和p,p'-滴滴依基于确定性风险评估的设备表面筛选值在一般工业暴露情景下分别为0.224 mg/m2、0.214 mg/m2和0.151 mg/m2,在拆卸...     

A tiered procedure for assessing the formation of biotransformation products of pharmaceuticals and biocides during activated sludge treatment

Upon partial degradation of polar organic micropollutants during activated sludge treatment, transformation products (TPs) may be formed that enter the aquatic environment in the treated effluent. However, TPs are rarely considered in prospective environmental risk assessments of wastewater-relevant compound classes such as pharmaceuticals and biocides. Here, we suggest and evaluate a tiered procedure, which includes a fast initial screening step based on high resolution tandem mass spectrometry (HR-MS/MS) and a subsequent confirmatory quantitative analysis, that should facilitate consideration of TPs formed during activated sludge treatment in the exposure assessment of micropollutants. At the first tier, potential biotransformation product structures of seven pharmaceuticals (atenolol, bezafibrate, ketoprofen, metoprolol, ranitidine, valsartan, and venlafaxine) and one biocide (carbendazim) were assembled using computer-based biotransformation pathway prediction and known human metabolites. These target structures were screened for in sludge-seeded batch reactors using HR-MS/MS. The 12 TPs found to form in the batch experiments were then searched for in the effluents of two full-scale, municipal wastewater treatment plants (WWTPs) to confirm the environmental representativeness of this first tier. At the second tier, experiments with the same sludge-seeded batch reactors were carried out to acquire kinetic data for major TPs that were then used as input parameters into a cascaded steady-state completely-stirred tank reactor (CSTR) model for predicting TP effluent concentrations. Predicted effluent concentrations of four parent compounds and their three major TPs were corroborated by comparison to 3-day average influent and secondary effluent mass flows from one municipal WWTP. CSTR model-predicted secondary effluent mass flows agreed within a factor of two with measured mass flows and confidence intervals of predicted and measured mass flows overlapped in all cases. The observed agreement suggests that the combination of batch-determined transformation kinetics with a simple WWTP model may be suitable for estimating aquatic exposure to TPs formed during activated sludge treatment. Overall, we recommend the tiered procedure as a realistic and cost-effective approach to include consideration of TPs of wastewater-relevant compounds into exposure assessment in the context of prospective chemical risk assessment.     

Development and Application of Computer Simulation Tools for Ecological Risk Assessment

Based on a review of available models for ecological risk estimation, most are site-specific and their applications are limited. However, general models, which can be easily adapted to other sites, remain few, in addition, they are simple and associated with significant uncertainties. In this paper, an approach is introduced for an ecological risk assessment (ERA) model that can be modified for site-specific conditions. Using computer simulation as a screening tool for ecological risk assessment can assist environmental managers and policy decision-makers in the planning and implementation of potentially highly focused assessments and remediation, should the ERA dictate the need. The model was integrated with a Windows-based interface and interactive database management system (DBMS) as a user-friendly software package. In addition, based on trophic sources, a food web has been integrated into the framework of the DBMS. In an effort to evaluate the model, a case study was implemented to characterize the effects on an ecosystem of replacing electroplated chromium coatings with sputtered tantalum at U.S. Army Yuma and Aberdeen Proving Grounds. Potential exposure pathways included ingestion, inhalation, and dermal absorption for terrestrial animals; root and foliar uptake for plants; and direct absorption for aquatic species. Overall, results showed that the most significant exposure resulted from molybdenum and hexavalent chromium, which posed higher risks to select aquatic and terrestrial species at both sites. On the other hand, tantalum (with vanadium as the surrogate) resulted in the least risk to all receptors within the studied areas. A sensitivity analysis demonstrated that soil-water distribution coefficients have a significant impact on the results. Based on the results, neither molybdenum nor chromium are recommended as a coating in gun barrels, and further study would be essential to address any affected firing range area. Tantalum is recommended for use, although for those species receiving a slight adverse risk, field investigations that include receptor sampling maybe necessary once soil/sediment and water sampling validates projected concentrations.     

The influence of metallurgy on the formation of welding aerosols

Recent research has indicated that insoluble ultrafine aerosols (ie., particles whose physical diameters are less than 100 nm) may cause adverse health effects due to their small size, and that toxicological response may be more appropriately represented by particle number or particle surface area. Unfortunately, current exposure criteria and the associated air-sampling techniques are primarily mass-based. Welding processes are high-temperature operations that generate substantial number concentrations of ultrafine aerosols. Welding aerosols are formed primarily through the nucleation of metal vapors followed by competing growth mechanisms such as coagulation and condensation. Experimental results and mathematical tools are presented to illustrate how welding metallurgy influences the chemical aspects and dynamic processes that initiate and evolve the resultant aerosol. This research suggests that a fundamental understanding of metallurgy and aerosol physics can be exploited to suppress the formation of undesirable chemical species as well as the amount of aerosol generated during a welding process.     

Decision support methods for the environmental assessment of contamination at mining sites

Polluting mine accidents and widespread environmental contamination associated with historic mining in Europe and elsewhere has triggered the improvement of related environmental legislation and of the environmental assessment and management methods for the mining industry. Mining has some unique features such as natural background pollution associated with natural mineral deposits, industrial activities and contamination located in the three-dimensional sub-surface space, the problem of long-term remediation after mine closure, problem of secondary contaminated areas around mine sites and abandoned mines in historic regions like Europe. These mining-specific problems require special tools to address the complexity of the environmental problems of mining-related contamination. The objective of this paper is to review and evaluate some of the decision support methods that have been developed and applied to mining contamination. In this paper, only those methods that are both efficient decision support tools and provide a ‘holistic’ approach to the complex problem as well are considered. These tools are (1) landscape ecology, (2) industrial ecology, (3) landscape geochemistry, (4) geo-environmental models, (5) environmental impact assessment, (6) environmental risk assessment, (7) material flow analysis and (8) life cycle assessment. This unique inter-disciplinary study should enable both the researcher and the practitioner to obtain broad view on the state-of-the-art of decision support methods for the environmental assessment of contamination at mine sites. Documented examples and abundant references are also provided.     

Quantitative assessment of aerosolized cyanobacterial toxins at two New Zealand lakes

The cyanobacterial toxins, nodularin and microcystin, are highly efficient inhibitors of cellular protein phosphatases. Toxicity primarily evolves following ingestion of cyanobacterial material or toxins and results in liver and renal pathology. Ingestion is the main route of exposure in the World Health Organizations current risk assessment of nodularin and microcystins. Nasally applied microcystin appears to have a 10-fold higher availability and toxicity than orally ingested toxins, suggesting that aerosolized toxins could represent a major risk for human populations close to lakes with cyanobacterial blooms. In this study, nodularin and microcystin levels in aerosols were assessed using high and low volume air samplers for 4, 12 and 24 h periods at lakes Forsyth and Rotorua (South Island, New Zealand). These lakes were experiencing blooms of Nodularia spumigena and Microcystis sp., respectively. Using the high volume samplers up to 16.2 pg m(-3) of nodularin and 1.8 pg m(-3) of microcystins were detected in the air. Aerosolized nodularin and microcystins do not appear to represent an acute or chronic hazard to humans. The latter was concluded based on calculations using average human air intakes, the highest nodularin or microcystin concentrations measured in the air in this study, and assuming inhalatory toxicities comparable to toxicological data obtained following intraperitoneal applications in mice. However, as the toxin concentrations in the air were calculated over extended sampling periods, peak values may be underestimated. Aerosolized toxins should be considered when developing risk assessments particularly for lakeside populations and recreational users where inhalation of cyanotoxins may be a secondary exposure source to a primary oral exposure.     

Assessing workplace chemical exposures: the role of exposure monitoring

Occupational exposure is the condition of being subjected through employment to a chemical, physical, or biological agent, or to a specific process, practice, behavior, or organization of work. Exposure to a chemical agent is typically the contact of that agent with the outer boundary of a subject, such as the respiratory system, skin, or digestive system. In occupational hygiene we are most concerned with exposure through the respiratory system, although, increasingly we are concerned with the results of dermal exposures, including those exposures to the skin that can be transferred to the mouth and digestive system. This presentation will detail methods available for assessing personal exposures to chemicals through monitoring. The results from monitoring can then be compared to established guidelines and regulations, although this is not the only rationale for making measurements. These monitoring methods are currently used around the world to establish the benchmark hazard from which risk to the worker can be predicted. The presentation will describe the general techniques for assessing exposures to the respiratory system from chemical gases and vapors, chemical dusts, and exposures to the skin from bulk chemicals or chemical contamination of surfaces. For respiratory exposures, direct-reading instruments are available for spot measurements, and for monitoring short-term fluctuations in concentration. However, most standards and regulations are based on time-integrated (time-weighted average) exposures, requiring longer-term integrative methods. Therefore, the specific focus of this review will be the methods available for full work-shift sampling. For gases and vapors this will include taking whole-air samples in canisters or polymer bags, or concentration of chemicals by absorption in liquids or adsorption on solid sorbents, with subsequent chemical analysis. Chemical concentration can take place by pumping air through the sorbing media, or by allowing molecules to diffuse to the sorbent surface. Transfer of the collected chemicals to the analytical instrumentation can be accomplished using solvent displacement and injection, or through the application of heat to bring the collected molecules back into the vapor phase. For particles, the particle size is important as this determines the site of deposition in the lungs, and so time-integrated sampling on filters using various types of size-selective samplers is preferred. Finally, some techniques that have been used to assess the potential for chemical contamination of the skin are presented. Biomonitoring is another tool that can be used to assess exposure, and the results are more relevant to dosimetric considerations than exposure. Biomonitoring is a complex subject worthy of a separate review, and will be considered only briefly here.