Comparison of old and new municipal solid waste management systems in Denizli, Turkey

Rapid economic growth, increasing population and change in living standards contribute to increasing the generation rate of municipal solid waste (MSW) in Denizli city, like other Turkish cities. The improper and poor MSW management system (old system) in Denizli caused environmental problems originating from the uncontrolled release of methane and leachate. In addition, the disposal of recyclable materials in unsanitary landfills is responsible for the consumption and destruction of natural sources. This paper presents a general overview of old and new MSW management practices in Denizli. Detailed data on MSW management practices including collection, transportation, disposal and recycling have been presented. The amount of solid waste generated in Denizli over the last decade has increased steadily over the years, from 108,500 tons in 1995 to 179,495 tons in 2006. The average MSW generation rate was found to be 1.23kg/day per capita. The major constituent of MSW in Denizli is food waste, but the percentage of recyclable waste has increased significantly recently. Except for metal wastes, the percentages of recyclable waste materials in Denizli are higher than in all neighborhood cities. The objective of this study is to compare the old and new MSW management systems in Denizli city. The MSW management system has been changed entirely last five years. A dumpsite was closed and a sanitary landfill with a composting facility was constructed. In addition, source separated collection has been carried out since 2002. The quantity of recyclable waste collected increased from 195 to 1549 tons. The amount of recyclable waste will continue to be increased by expanding the source separation collection system to all the districts of the city and preventing scavenging. Thus, revenue from recyclable waste ($7227 in 2006) is expected to increase. In addition, the capacity of the composting facility will be increased. Most importantly, information to increase public participation and awareness in municipal recovery programs has to be provided.     

Recovery and recycling practices in municipal solid waste management in Lagos, Nigeria

The population of Lagos, the largest city in Nigeria, increased seven times from 1950 to 1980 with a current population of over 10 million inhabitants. The majority of the city's residents are poor. The residents make a heavy demand on resources and, at the same time, generate large quantities of solid waste. Approximately 4 million tonnes of municipal solid waste (MSW) is generated annually in the city, including approximately 0.5 million of untreated industrial waste. This is approximately 1.1 kg/cap/day. Efforts by the various waste management agencies set up by the state government to keep its streets and neighborhoods clean have achieved only minimal success. This is because more than half of these wastes are left uncollected from the streets and the various locations due to the inadequacy and inefficiency of the waste management system. Whilst the benefits of proper solid waste management (SWM), such as increased revenues for municipal bodies, higher productivity rate, improved sanitation standards and better health conditions, cannot be overemphasized, it is important that there is a reduction in the quantity of recoverable materials in residential and commercial waste streams to minimize the problem of MSW disposal. This paper examines the status of recovery and recycling in current waste management practice in Lagos, Nigeria. Existing recovery and recycling patterns, recovery and recycling technologies, approaches to materials recycling, and the types of materials recovered from MSW are reviewed. Based on these, strategies for improving recovery and recycling practices in the management of MSW in Lagos, Nigeria are suggested.     

Management of recycling in the Gulf Co-operation Council states

Although some of the Gulf Co-operation Council (GCC) member states have placed recycling at the top of their waste management priorities, the low cost of landfill and the availability of land, usually old sand or gravel quarries, make recycling programs infeasible, uneconomical and unachievable. The only comprehensive form of recycling available within the GCC states is recycling of paper and cartons. The majority of the GCC states never set national or regional recycling targets. The cost of recycling in the GCC states region could be moderate to high depending on the collection system selected for the recycling program. Almost all of the cities within the GCC states use mechanised systems for daily collection of municipal solid waste (MSW). Therefore, the same daily collection system used for MSW might well be used for collection of recyclable materials, both on the same day and at the same time, or according to a different timetable. This paper provides strategies for developing an effective recycling marketing program and discusses regional co-ordination options.     

Solid waste management practices and review of recovery and recycling operations in Turkey

This paper provides a general overview of solid waste data and management practices employed in Turkey during the last decade. Municipal solid waste statistics and management practices including waste recovery and recycling initiatives have been evaluated. Detailed data on solid waste management practices including collection, recovery and disposal, together with the results of cost analyses, have been presented. Based on these evaluations basic cost estimations on collection and sorting of recyclable solid waste in Turkey have been provided. The results indicate that the household solid waste generation in Turkey, per capita, is around 0.6 kg/year, whereas municipal solid waste generation is close to 1 kg/year. The major constituents of municipal solid waste are organic in nature and approximately 1/4 of municipal solid waste is recyclable. Separate collection programmes for recyclable household waste by more than 60 municipalities, continuing in excess of 3 years, demonstrate solid evidence for public acceptance and continuing support from the citizens. Opinion polls indicate that more than 80% of the population in the project regions is ready and willing to participate in separate collection programmes. The analysis of output data of the Material Recovery Facilities shows that, although paper, including cardboard, is the main constituent, the composition of recyclable waste varies strongly by the source or the type of collection point.     

Life cycle assessment of solid waste management options for Eskisehir, Turkey

Life cycle assessment (LCA) methodology was used to determine the optimum municipal solid waste (MSW) management strategy for Eskisehir city. Eskisehir is one of the developing cities of Turkey where a total of approximately 750tons/day of waste is generated. An effective MSW management system is needed in this city since the generated MSW is dumped in an unregulated dumping site that has no liner, no biogas capture, etc. Therefore, five different scenarios were developed as alternatives to the current waste management system. Collection and transportation of waste, a material recovery facility (MRF), recycling, composting, incineration and landfilling processes were considered in these scenarios. SimaPro7 libraries were used to obtain background data for the life cycle inventory. One ton of municipal solid waste of Eskisehir was selected as the functional unit. The alternative scenarios were compared through the CML 2000 method and these comparisons were carried out from the abiotic depletion, global warming, human toxicity, acidification, eutrophication and photochemical ozone depletion points of view. According to the comparisons and sensitivity analysis, composting scenario, S3, is the more environmentally preferable alternative. In this study waste management alternatives were investigated only on an environmental point of view. For that reason, it might be supported with other decision-making tools that consider the economic and social effects of solid waste management.     

Municipal solid waste characteristics and management in Gümüşhane, Turkey

This paper presents a general overview of the current municipal solid waste (MSW) management in Gümüşhane Province, Turkey. In order to characterize the solid waste stream in the Municipality of Gümüşhane, a long-term study was conducted over a 52-week period between the spring of 2004 and the winter of 2005. In this study, percentage of components and specific weight of the MSW, the composting parameters (moisture content, total organic carbon, total nitrogen and pH), organic matter content, calorific value and the heavy metal concentrations (Cd, Cr, Cu, Ni, Pb, Zn, Fe, Mn, Co) of the compostable wastes sorted from the mixed MSW were determined and evaluated. In Gümüşhane, a mean of 70 tons of MSW are generated each day or 1 kg/day/capita. Approximately 4500 kg of the MSW were collected and sorted in a year, and the mean specific weight of these is 308 kg/m³. Approximately 30% of the MSW generated is compostable wastes and the yearly mean moisture content, organic matter content, C/N ratio and pH of these are 78%, 92.1%, 21.6/1 and 4.73, respectively, and approximately 24% of the MSW consists of recyclable materials. The recommended system deals with maximizing recycling and minimizing landfilling of the MSW, and consists of separation at source, collection, sorting, recycling, composting and sanitary landfilling. Heavy metal concentrations of the compostable wastes from the open dump were determined to decrease in the following order: Fe > Mn > Zn > Cr > Cu > Pb > Ni > Cd > Co.     

Review of municipal solid waste management options in Malaysia,with an emphasis on sustainable waste-to-energy options

A beautiful and clean environment is the desire of every society. Malaysia is facing an uncontrolled increase in municipal solid waste (MSW) generation due to population growth, economic advancement, and industrialization, but the current, most common waste disposal practice of landfilling is not sustainable. The increasing standard of living also saps more energy from the power generation systems in which fossil fuels are the major source of fuel for the plants. Malaysia generates about 0.5–1.9 kg/capita/day of MSW; a total of about 25,000 tonnes/day of MSW is currently generated and is estimated to exceed 30,000 tonnes/day by 2020. Malaysian MSW is mainly composed of 45 % food waste, 24 % plastic, 7 % paper materials, 6 % metal, 4 % wood and 3 % glass, which are commingled, and is thus characterised by 52–66 % moisture content. Currently, 80–95 % of collected MSW is landfilled and 5 % is recycled, while composting and energy recovery are rarely practiced. This paper reviews the solid waste practice in Malaysia and looks into alternative management options for sustainability. Malaysia MSW represents recyclable power and energy potential if properly sorted. This study considered the practice of sorting at the source and the use of combustible MSW components as fuel to generate heat for a hybrid solar, flue gas, chimney power plant.     

Medical waste management in Trachea region of Turkey: suggested remedial action.

The main objective of this paper was to analyse the present status of medical waste management in the Trachea region of Turkey and subsequently to draw up a policy regarded with generation, collection, on-site handling, storage, processing, recycling, transportation and safe disposal of medical wastes. This paper also presents the results of study about awareness on how to handle expired drugs. Initially all health-care establishments in Tekirda?, Edirne and Kyrklareli provinces in Trachea region were identified and the amounts of hospital wastes generated by each of them were determined. Current medical waste-management practices, including storage, collection, transportation and disposal, in surveyed establishments were identified. Finally, according to results, remedial measurements for medical waste management in these establishments were suggested. Unfortunately, medical wastes are not given proper attention and these wastes are disposed of together with municipal and industrial solid wastes. The current disposal method is both a public health and environmental hazard. When landfill sites are visited, many scavengers can be seen sorting for recyclable materials, a practice which is dangerous for the scavengers. In addition, it was found that some staff in health-care establishments are unaware of the hazard of medical wastes. It is concluded that a new management system, which consists of segregation, material substitution, minimization, sanitary landfilling and alternative medical waste treatment methods should be carried out. For the best appropriate medical waste management system, health-care establishment employers, managers and especially the members of house- keeping divisions should be involved in medical waste management practice.     

Recycling of plastic packaging waste in Bandung City,Indonesia

Economic growth, changing consumption and production patterns are resulting in rapid increase in the generation of plastic wastes, including plastic packaging waste (PPW). A variety of PPW is identified in the municipal solid waste (MSW) stream. In this paper, quantity and composition of PPW at generators (residential and nonresidential sectors) and at the informal sector of waste recycling were measured, and accordingly the flow of PPW within Bandung City, Indonesia was analyzed. Though the generation rate per capita is not so high (25.1 g per day), total PPW generated by 2.3 million inhabitants in Bandung becomes 58.4 tonnes per day (3.76 % of total MSW generated). Due to lack of integrated MSW management, most of PPW is neither collected properly nor disposed of in appropriate manner by the municipality. Collection of valuable wastes including PPW is done predominantly by the informal sector without regard to health and safety. It is predicted that total PPW recycled by various informal waste recycling players like scavengers, junkmen, intermediates, and dealers is 27.5 tonnes per day (64.6 % of total PPW generated). Interviews regarding the existing handling methods and incentives preferred by generators to increase the recycling rate are also presented.     

An Overview of Solid Waste Management and Plastic Recycling in Qatar

Municipal solid waste management (MSWM) constitutes one of the most crucial health and environmental problems facing authorities in the Arabian Gulf. Recent literature on current solid waste management (SWM) in Qatar has been reviewed in this paper, and a focused study has been carried out to provide a review on the total amount of municipal solid waste generated, stored, collected, disposed as well as the constituents of the waste. The analysis showed that Qatar produced around 2,000,000 tons of solid municipal waste annually, corresponding to a daily generation rate per capita of about 2.5 kg. About 60% of MSW is organic material and about 300 kg is composed daily. Landfill and composting is considered the most appropriate waste disposal techniques in Qatar. Um-Al-Afai landfill has nearly 80% of MSW. Because of the increased migration in Qatar, there is a sharp rise in the volume and also in the variety of solid waste. It is important to alleviate societal concerns over the increased rate of resource consumption and waste production; thus, policy makers have encouraged recycling and reuse strategies to reduce the demand for raw materials and to decrease the quantity of waste going to landfill. An example of the benefit of mechanical recycling of plastics compared to land filling and composting was conducted by GaBi 4 life cycle analysis tool which showed the benefits to the global warming and human toxicity. Recycling is the favored solution for plastic waste management, because it has a lower environmental impact on the defined impact categories, from Global Warming Potential (GWP) and Human Toxicity Potentials (HTP) indicators.     

MSW management for waste minimization in Taiwan: the last two decades

Taiwan is the second most densely populated country in the world; its 22.604 million residents (2002) live in an area of 35,967 km2 (628 people/km2). Taiwan's economy has grown rapidly during the last 20 years, resulting in a corresponding increase in the amount of municipal solid waste (MSW). This study describes and evaluates the municipal solid waste management system in Taiwan. The study's results indicate that the amount of MSW began to decline after 1997, when the government enforced aggressive MSW management policies. By 2002, total MSW production had dropped by 27%, and the average daily per capita weight of MSW had fallen from 1.14 kg in 1997 to 0.81 kg in 2002. Summarizing the successful experience of MSW reduction in Taiwan, the most important factor was the government's combining of the MSW collection system with reduction/recycling programs. The second most important factor was the policy of extended producer responsibility, which laid a foundation of recycling by producers and retailers and promoted public recycling.     

The use of chemical composition data in waste management planning--a case study

As the waste industry continues to move from a disposal-based system to one based on a combination of recovery options, the need for information on the composition of waste increases and this is reflected by the amount of information on the physical composition of municipal solid wastes that is now available. However, there is far less information on the chemical composition of municipal solid waste. The results from a number of chemical surveys from Europe are compared and show a reasonable degree of agreement, but several problems were identified with the data. Chemical and physical compositional data are combined in a case study example to investigate the flow of key potential pollutants in an integrated solid waste management system that uses materials recycling, composting, incineration and landfilling. This case study has shown that an integrated waste management strategy diverts lead and cadmium away from composting and recycling to incineration, which effectively isolates these elements from the environment through efficient capture of the pollutants followed by secure landfilling or recycling of the residues. However, further work is needed to determine the distribution of mercury in incineration residues and its fate when the residues are landfilled.     

The collection system for residential recyclables in communities in Haidian District, Beijing: a possible approach for China recycling

Recycling and reusing recyclables is an important way to solve the municipal solid waste (MSW) problem. As the collection of solid waste takes up the largest percentage of MSW management budgets, improving the collection of recyclables is important. Since the decline of government-run waste buying depots in the late 1980s, the collection of recyclables from households and waste deposit sites in China is done by buyers with small informal bases and waste pickers, who are usually unskilled rural people who have come to the cities. Because of this, the current system is seen to have social problems. So, the recyclable collection system has both social as well as economic significance. China is in the process of rapid industrialization and urbanization, and a new mode of community collection system is emerging. It operates by market mechanisms, with waste collection companies that are supported by the municipal government, establishing recycle service sites, and employing workers to buy recyclables door-to-door. This paper is a case study of the new system in the Haidian District, Beijing. It summarizes the system, compares it to experiences in other countries and discusses whether the new approach contributes to resources recycling in China.     

Implementing separate waste collection and mechanical biological waste treatment in South Africa: A comparison with Austria and England

The degradation of organic compounds found in municipal solid waste (MSW) under the anaerobic landfill conditions produces gas and liquid emissions that can protract well into the landfill after-care period. The European Landfill Directives regulate the amount and nature of the organic compounds disposed into landfills. In South Africa and other developing countries, MSW is still landfilled without any kind of pre-treatment. This paper presents a pilot project of mechanical biological waste treatment (MBWT) in South Africa implemented at municipal level in the city of Durban using passively aerated open windrows. Based on case studies from Austria, England and South Africa, a waste minimisation model which can facilitate full-scale implementation of MBWT in developing countries is presented. MSW was treated in open windrows for 8 weeks. Composting temperature reached a maximum of 65 °C in less than 10 days. The results of eluate tests on waste samples from the windrows at the end of composting show a reduction of BOD₅ and BOD₅/COD ratios equal to 35.7% and 16.7%, respectively. The percent waste composition of the treated MSW was 28.3% putrescibles, 17.4% garden refuse, 13.3% plastic, 12.4% fabrics, 12% paper and other elements. The waste composition shows that more than 40% of un-treated organic material and also more than 40% non-biodegradable and recyclable materials are still landfilled without any form of biological treatment or resource recovery. A simple wet and dry waste collection model can promote recycling, treatment of biological waste before landfilling, resource recovery, labour intensive jobs and hence sustainable landfilling in the South African scenario as well as in similar developing countries.     

Municipal solid waste disposal in Portugal

In recent years municipal solid waste (MSW) disposal has been one of the most important environmental problems for all of the Portuguese regions. The basic principles of MSW management in Portugal are: (1) prevention or reduction, (2) reuse, (3) recovery (e.g., recycling, incineration with heat recovery), and (4) polluter-pay principle. A brief history of legislative trends in waste management is provided herein as background for current waste management and recycling activities. The paper also presents and discusses the municipal solid waste management in Portugal and is based primarily on a national inquiry carried out in 2003 and directed to the MSW management entities. Additionally, the MSW responsibility and management structure in Portugal is presented, together with the present situation of production, collection, recycling, treatment and elimination of MSW. Results showed that 96% of MSW was collected mixed (4% was separately collected) and that 68% was disposed of in landfill, 21% was incinerated at waste-to-energy plants, 8% was treated at organic waste recovery plants and 3% was delivered to sorting. The average generation rate of MSW was 1.32 kg/capita/day.     

An environmental analysis for comparing waste management options and strategies

The debate on different waste management practices has become an issue of utmost importance as human activities have overloaded the assimilative capacity of the biosphere. Recent Italian law on solid waste management recommends an increase in material recycling and energy recovery, and only foresees landfill disposal for inert materials and residues from recovery and recycling. A correct waste management policy should be based on the principles of sustainable development, according to which our refuse is not simply regarded as something to eliminate but rather as a potential resource. This requires the creation of an integrated waste management plan that makes full use of all available technologies. In this context, eMergy analysis is applied to evaluate three different forms of waste treatment and construct an approach capable of assessing the whole strategy of waste management. The evaluation included how much investment is needed for each type of waste management and how much "utility" is extracted from wastes, through the use of two indicators: Environmental yield ratio (EYR) and Net eMergy. Our results show that landfill is the worst system in terms of eMergy costs and eMergy benefits. Composting is the most efficient system in recovering eMergy (highest EYR) from municipal solid waste (MSW) while incineration is capable of saving the greatest quantity of eMergy per gram of MSW (highest net eMergy). This analysis has made it possible to assess the sustainability and the efficiency of individual options but could also be used to assess a greater environmental strategy for waste management, considering a system that might include landfills, incineration, composting, etc.     

Life-cycle assessment of municipal solid wastes: development of the WASTED model

This paper describes the development of the Waste Analysis Software Tool for Environmental Decisions (WASTED) model. This model provides a comprehensive view of the environmental impacts of municipal solid waste management systems. The model consists of a number of separate submodels that describe a typical waste management process: waste collection, material recovery, composting, energy recovery from waste and landfilling. These submodels are combined to represent a complete waste management system. WASTED uses compensatory systems to account for the avoided environmental impacts derived from energy recovery and material recycling. The model is designed to provide solid waste decision-makers and environmental researchers with a tool to evaluate waste management plans and to improve the environmental performance of solid waste management strategies. The model is user-friendly and compares favourably with other earlier models.     

Evaluation of municipal solid waste flow in the Bandung metropolitan area, Indonesia

This article covers partial results for research which was carried out to determine the effectiveness of municipal solid waste (MSW) recycling in Bandung metropolitan urban areas. It focuses on the results of waste flow analysis as basic information in developing better MSW management systems, especially in applying the reduce, reuse, recycle (3Rs) concept. The dependence upon final disposal sites in MSW management and the difficulties in finding disposal sites have resulted in interest in the 3Rs concept. In this research, the determination of waste compositions and the potential of recycling were evaluated based on data from interviews with householders, members of the nonhousehold sector, and recycling actors and on measurement. The informal sector activities observed were mainly from handcart crews, mobile scavengers, transfer point scavengers, final disposal scavengers, waste traders, and recycling business people at several locations in Bandung and Cimahi cities. The estimated waste recycling and composting by stakeholders has not yet achieved 10% (wet weight) of the total waste generated. As in other major cities in developing countries, the informal sectors hold an important role in the recovery of usable materials from waste. However, inorganic waste recycling activities from this sector have not even reached 8% (wet weight) of the total waste generated.     

Municipal solid waste management strategies in Turkey

Municipal solid waste (MSW) is a major environmental problem in Turkey, as in many developing countries. Problems associated with municipal solid waste are difficult to address, but efforts towards more efficient collection and transportation and environmentally acceptable waste disposal continue in Turkey. Although strict regulations on the management of solid waste are in place, primitive disposal methods such as open dumping and discharge into surface water have been used in various parts of Turkey. This study presents a brief history of the legislative trends in Turkey for MSW management. The study also presents the MSW responsibility and management structure together with the present situation of generation, composition, recycling, and treatment. The results show that approximately 25 million ton of MSW are generated annually in Turkey. About 77% of the population receives MSW services. In spite of efforts to change open dumping areas into sanitary landfills and to build modern recycling and composting facilities, Turkey still has over 2000 open dumps.     

Municipal solid waste management in Pudong New Area, China

The increase in population, the rapid economic growth and the rise in community living standards accelerate municipal solid waste (MSW) generation in developing cities. This problem is especially serious in Pudong New Area, Shanghai, China. The daily amount of MSW generated in Pudong was about 1.11 kg per person in 2006. According to the current population growth trend, the solid waste quantity generated will continue to increase with the city's development. In this paper, we describe a waste generation and composition analysis and provide a comprehensive review of municipal solid waste management (MSWM) in Pudong. Some of the important aspects of waste management, such as the current status of waste collection, transport and disposal in Pudong, will be illustrated. Also, the current situation will be evaluated, and its problems will be identified.