A Study on The Management of Municipal Residential Solid Waste in China

As the main organic pollutant in municipal living waste , kitchen waste causes secondary pollution in the course of its being gathered and transported to the landfill by mixing with other refuse and by decomposition. This makes pollution prevention more difficult and raises the cost of landfill engineering. However, the amount of solid waste to be treated can be decreased and such pollution burden lessened by disposing of the solid waste in local municipal areas. The program in Beijing also shows that this works well with our situation in China and can accelerate marketization and public participation.     

加入WTO对我国城市垃圾处理行业的影响和对策

中国已经正式加入了WTO。环保产业是 2 1世纪的重头产业 ,而城市垃圾处理行业又是环保产业的核心之一。本文在分析我国城市垃圾处理行业发展状况的基础上 ,结合WTO及《WTO协议》的原则和规定 ,从机遇和挑战两个方面分析了加入WTO对我国城市垃圾处理行业的影响 ;并提出了应对策略     

Selection of an appropriate waste-to-energy conversion technology for Dhaka City,Bangladesh

Solid waste disposal poses a significant problem, as it leads to land pollution if openly dumped, water pollution if dumped in low lands and air pollution if burnt. Moreover, the scarcity of land and increase in land prices especially in Dhaka, the capital city of Bangladesh create the problems of developing new landfill sites. Realising the existing and future impacts of waste disposal issues, the analytic hierarchy process model was applied to select an appropriate Waste-to-Energy (WTE) conversion technology for household waste of Dhaka-Mirpur Cantonment area. Three alternatives, namely, anaerobic digestion, pyrolysis and plasma gasification (PG) technologies and nine criteria under three aspects (technological, environmental and financial) were chosen for comparison. The analysis revealed that PG is the most appropriate WTE conversion technology in the study area. The selected PG technology has a relatively small footprint; it can treat unsorted waste and can produce good-quality synthetic gas without generating extremely toxic by-products.     

Current Status of Manufacturing Hazardous Waste in Shanghai

Abstract

It is difficult to manage the manufacturing hazardous waste (MHW) which is generated from a huge amount of complicated sources and causes very serious pollution. Therefore more and more attention has been paid to MHW pollution. Shanghai, as an industrial and economic center and an international metropolis in China, has a vast industrial system spanning a multitude of sectors, which generates MHW not only in a huge magnitude but also in a large variety of types from complicated sources, resulting in severe pollution. In 2003, the production of MHW in Shanghai is about 3.96 × 10⁵ ton, involving 33 indices. Most of MHW in Shanghai is treated and disposed of, but a significant portion is not handled properly and effectively. This paper carries out in-field investigation on the current status of MHW production and treatment in Shanghai, and puts forward scientific proposals that Shanghai should facilitate cleaner production and minimize hazardous waste; strictly enforce hazardous waste registration system, strengthen monitoring the certified enterprises; strengthen intent disposal center construction and realize hazardous waste reclamation; accelerate establishing the technical criteria and the management policy, promote the research and development on the treatment and disposal technology, and strengthen information management, thus realizing integrated management on MHW pollution.     

Goal-based waste management strategy to reduce persistence of contaminants in leachate at municipal solid waste landfills

The required minimum 30-year post-closure care period for municipal solid waste (MSW) landfills can be shortened by reducing or eliminating of MSW components with long-terms effect in gas and leachate. The objectives of this study were to evaluate the relative persistence of landfill gas, leachate quantity, and selected leachate parameters using post-closure monitoring data from a case study landfill in south Florida. The relative persistence of selected decomposition byproducts in leachate were evaluated by both zero order and first order models based on monitoring data from the case study landfill. The analyses show that although gas and leachate production rates diminish very quickly, some contaminants remain in leachate as the decomposition process continues at a slower rate. For the case study landfill, the parameters which have been detected consistently at high concentrations (above MCL) included chloride, TDS, iron, bicarbonate, benzene, and vinyl chloride. Among these, vinyl chloride has the fastest and TDS has the slowest rate of disappearance in the landfill environment. The effect of waste diversion on persistence times of the selected persistent leachate quality parameters was evaluated. For example, a 40% reduction in the amount of plastics deposited in the landfill could reduce the monitoring time for benzene from 59 to 39 years. Zero order model underestimates the persistence times of the contaminants in leachate due to its linear nature. Shortening the monitoring times can provide significant savings for municipalities who need to continue monitoring leachate quality until the MCL levels are reached.     

Evaluation of landfill leachate in arid climate-a case study

Generation of leachate from municipal solid waste (MSW) landfill in arid regions has long been neglected on the assumption that minimal leachate could be formed in the absence of precipitation. Therefore, a case study was conducted at two unlined MSW landfills, of different ages, in the state of Kuwait in order to determine the chemical characteristics of leachate and examine the mechanism of leachate formation. Leachate quality data were collected from both active and old (closed) landfills where co-disposal of MSW and other solid and liquid wastes is practiced. The analysis of data confirms that leachates from both landfills are severely contaminated with organics, salts and heavy metals. However, the organic strength of the leachate collected from the old landfill was reduced due to waste decomposition and continuous gas flaring. A significant degree of variability was encountered and factors which may influence leachate quality were identified and discussed. A water balance at the landfill site was assessed and a conceptual model was presented which accounts for leachate generation due to rising water table, capillary water and moisture content of the waste.     

Environmental and economic benefit of recycling model of packaging waste: a case study on aluminum

Abstract

In order to achieve sustainable utilization of natural resources, save energy and protect environment and ecosystem, it is important for a region or a nation to develop and implement a viable waste recycling model from both theoretical and practical point of view. Some packaging recycling models operated in developed countries are introduced in this article. Aluminium can recovery and recycling is emphasized. Cost effective, economic and environmental benefit of different models are compared and analyzed. The result shows that all recycling models have their characteristics due to the initial purpose of recovery and the situation of the implementing country. However, all the models contribute to the reduction of municipal solid waste disposal and resources conservation.     

北京市城市生活垃圾收运系统研究

对北京市城市生活垃圾收运系统现状进行了全面的分析,对北京城八区生活垃圾收集、分类收集、转运、生活垃圾处理设施和垃圾物流现状进行了分析,同时对北京市城市生活垃圾收运系统进行了分析,指出了北京市城市生活垃圾收运系统存在的主要问题和今后改进的建议及处理处置设施的规划,为北京城市生活垃圾收运系统的建设和完善起到了积极地推动作用。     

Recovery of copper from small grain size fractions of municipal solid waste incineration bottom ash by means of density separation

Small grain size fractions of municipal solid waste incineration (MSWI) bottom ash (BA) contain elemental and chemically bonded metals in appreciable amounts, especially copper. Investigations with a centrifugal concentrator were carried out using samples, which had been treated with different impact devices. Partly the impacts of single devices were visible in outlines, but mostly the surfaces of the metals were still covered with mineral residues. To generate copper rich fractions, parameters of the separation process should ensure mass yields <2%, best between 0.5 and 1%. The density of the concentrates is then generally >3.2 g/cm³. Best results were achieved with material from a special treatment train which is adapted to grain sizes <2 mm. Reliable copper contents between 20 and 40% (single runs >50%) could be realised. However, considering the required mass yields, referred to this subset only 150–170 g copper would be recovered from 1 Mg MSWI BA. Furthermore, this copper is only in parts present in elemental form. A dependable added value of such treatment step seems to be given only, if that enables a recycling of the mineral aggregates (tailings) in parallel to avoid landfill costs.     

人口增长、收入水平与城市环境

伴随着我国城镇化进程的不断加快,城市环境污染问题备受关注。本文以城镇居民生活垃圾污染行为为起点,通过比较居民与政府目标函数,首先从理论上做出判断,城镇人口数量增加以及居民生活质量提高均会导致城市生活垃圾数量增长,从而对城市环境产生影响。随后,进一步采取Panel data的分析方法,以我国2004-2008年省级面板数据为样本,从城市生活垃圾污染的角度对我国城镇人口增长、居民收入水平与城市环境间的关系进行计量检验。结果显示:我国城市生活垃圾产生数量分别与城镇人口增长、居民收入水平间存在着长期正向协整关系,即在我国城镇化水平和居民生活质量不断提升的背景下,城市生活垃圾数量的增长以及对城市环境的污染存在着内在必然性;另外,我国城市生活垃圾数量的自发增长对平均增长的偏离逐年下降,可见,存在政策、制度、行为等外生因素抑制我国城市生活垃圾数量的增长。最后,文章从生活垃圾控制和处理的角度,就改善我国城市环境和促进城市环境可持续发展提出了简要的政策建议。     

Industrial layout reconstruction,the role of local government and variation of pollution distribution in China

ABSTRACT

In recent years, high-polluting industries have been gradually shifted from the eastern developed regions to the central and western underdeveloped regions in China. Certain environmental regulations have been in place accordingly in various regions, but the pollution in the central and western regions has risen sharply. Based on the data of interprovincial panel in China from 2006 to 2015, this paper calculates high-pollution industry dynamic agglomeration index, environmental pollution agglomeration index and relative environmental regulation intensity index, and uses Generalized Method of Moments to carry out the regression analyses of the whole samples, regional heterogeneity and temporal heterogeneity. The results show that there is an inverted U-shaped relationship between relative environmental regulation and environmental pollution concentration in China. The concentration degrees of industrial wastewater pollution and industrial waste gas pollution are deepened, which are mainly caused by the transfer of highly polluting industries. However, the concentration of industrial solid waste pollution caused by the transfer is not obvious. Furthermore, the deepening of industrialization intensifies the concentration of regional environmental pollution. Environmental Kuznets Curve does exist in China, but it is not significant. The increase of labor cost and quality will reduce the concentration of environmental pollution.     

Introduction of a recycling system for sustainable municipal solid waste management: a case study on the greater Banjul area of the Gambia

This research proposes for the introduction of a recycling system in the Gambia to enhance sustainable municipal solid waste management. Poor infrastructures, coupled with inadequate resources and lack of funding, work against the optimization of a MSW disposal service. In the authors’ view, authorities in charge of waste management need to change not only behaviors, but modernize their processes. Recycling technology is a key part of the solution. A model has been developed which suggest the involvement of stakeholders to achieve meaningful sustainable MSWM. This can be achieved by recognizing the role of the informal sector through community-based organizations, Non-Governmental Organizations (NGOs), and the private sector. The open dump approach is leading to severe environmental consequences as the groundwater and soil within the dump is been contaminated. In this study, an integrated municipal solid waste management approach was developed with a model to help achieve sustainable municipal solid waste management. Resource recovery, not waste disposal, must be the ultimate goal with clearly defined end user markets so that the recovery loop is complete. Mandatory sorting of waste at household level would help greatly in making recycling activity successful.     

Exposure to emissions from municipal solid waste incinerators and miscarriages: A multisite study of the MONITER Project

BackgroundMiscarriages are an important indicator of reproductive health but only few studies have analyzed their association with exposure to emissions from municipal solid waste incinerators.This study analyzed the occurrence of miscarriages in women aged 15–49 years residing near seven incinerators of the Emilia-Romagna Region (Northern Italy) in the period 2002–2006.MethodsWe considered all pregnancies occurring in women residing during the first trimester of pregnancy within a 4 km radius of each incinerator. Addresses were geocoded and exposures were characterized by a dispersion model (ADMS Urban model) producing pollution maps for incinerators based on PM₁₀ stack measurements and for other pollution sources based on NO_x ground measurements. Information on pregnancies and their outcomes was obtained from the Hospital Discharge Database. Simplified True Abortion Risks (STAR) × 100 estimated pregnancies were calculated. We ran logistic regressions adjusting for maternal characteristics, exposure to other sources of pollution, and sites, considering the whole population and stratifying by miscarriage history.ResultsThe study analyzed 11,875 pregnancies with 1375 miscarriages. After adjusting for confounders, an increase of PM₁₀ due to incinerator emissions was associated with an increased risk of miscarriage (test for trend, p = 0.042). The odds ratio for the highest quartile of exposed versus not exposed women was 1.29, 95% CI 0.97–1.72. The effect was present only for women without previous miscarriages (highest quartile of exposed versus not exposed women 1.44, 95% CI 1.06–1.96; test for trend, p = 0.009).ConclusionExposure to incinerator emissions is associated with an increased risk of miscarriage. This result should be interpreted with those of a previous study on reproductive health conducted in the same area that observed an association between incinerator exposure and preterm births.     

Analysis of cost–benefit in life-cycle of plastic solid waste: combining waste flow analysis and life cycle cost as a decision support tool to the selection of optimum scenario

Millions of tons of plastic are consumed annually in the world due to its significant characteristics such as durability, flexibility, and low weight. High consumption has made plastic one of the most important municipal solid waste compounds, the quantity of which has increased in recent decades. Plastic solid wastes are known as a threat to the environment, and its efficient management in various aspects such as cost–benefit requires decision-making tools. This study was assessing the cost–benefit of plastic solid waste management by development of an economic model, and definition of different scenarios to change plastic solid waste management status. The results showed that 8971 tons of plastic solid waste were generated annually in the studied city. The plastic solid wastes were finally transferred to either recycling or landfilling site through 5 identified routes. 83 percent of the total recycled plastic solid waste was due to post-separation routes, and only 7.7 percent of the total plastic solid waste was recycled from the source separation route. The economic comparison of scenarios showed that with the aggregation of post-separation routes, the net revenue of plastic solid waste management increases by 334,000 euro per year while increasing the public participation and the ratio of source separation route raises net revenue by 875,000 euro per year, which was the best economic condition among the scenarios. Using life cycle cost method and it’s respected developed economic model truly satisfied the conditions of both, the current plastic solid waste management and the alternative scenarios, and hence can be adopted as a tool for decision-making.

     

Cancer mortality in towns in the vicinity of incinerators and installations for the recovery or disposal of hazardous waste

BackgroundWaste treatment plants release toxic emissions into the environment which affect neighboring towns.ObjectivesTo investigate whether there might be excess cancer mortality in towns situated in the vicinity of Spanish-based incinerators and installations for the recovery or disposal of hazardous waste, according to the different categories of industrial activity.MethodsAn ecologic study was designed to examine municipal mortality due to 33 types of cancer, across the period 1997–2006. Population exposure to pollution was estimated on the basis of distance from town of residence to pollution source. Using Besag–York–Mollié (BYM) regression models with Integrated Nested Laplace approximations for Bayesian inference, and Mixed Poisson regression models, we assessed the risk of dying from cancer in a 5-kilometer zone around installations, analyzed the effect of category of industrial activity, and conducted individual analyses within a 50-kilometer radius of each installation.ResultsExcess cancer mortality (BYM model: relative risk, 95% credible interval) was detected in the total population residing in the vicinity of these installations as a whole (1.06, 1.04–1.09), and, principally, in the vicinity of incinerators (1.09, 1.01–1.18) and scrap metal/end-of-life vehicle handling facilities, in particular (1.04, 1.00–1.09). Special mention should be made of the results for tumors of the pleura (1.71, 1.34–2.14), stomach (1.18, 1.10–1.27), liver (1.18, 1.06–1.30), kidney (1.14, 1.04–1.23), ovary (1.14, 1.05–1.23), lung (1.10, 1.05–1.15), leukemia (1.10, 1.03–1.17), colon–rectum (1.08, 1.03–1.13) and bladder (1.08, 1.01–1.16) in the vicinity of all such installations.ConclusionsOur results support the hypothesis of a statistically significant increase in the risk of dying from cancer in towns near incinerators and installations for the recovery or disposal of hazardous waste.     

OPTIONS FOR ENVIRONMENTAL SUSTAINABILITY OF THE CRUDE PALM OIL INDUSTRY IN THAILAND THROUGH ENHANCEMENT OF INDUSTRIAL ECOSYSTEMS

The crude palm oil industry plays an important role in the economic development of Thailand and in enhancing the economic welfare of the population. Despite obvious benefits of this industrial development, it also significantly contributes to environmental degradation, both at the input and the output sides of its activities. On the input side, crude palm oil mills use large quantities of water and energy in the production process. On the output side, manufacturing processes generate large quantities of wastewater, solid waste/by-products and air pollution. Current industrial wastes and recoverable materials are empty fruit bunches, fibers, shells and ash. It is estimated that in 2003, a total of 2.1 million ton of solid wastes/by-products and 2.5 million m³ of wastewater were generated. The concept of the industrial ecosystem points at the potential of industrial waste recycling resembling food chains, food webs and nutrient cycles of nature. Following the notion of industrial ecology crude palm oil mills can develop a number of waste recycling and reuse systems. This paper analyzes the nature of these industrial ecosystems, divided in in-plant ecosystems (clean technology options) and external waste exchange between crude palm oil industries and other economic activities in Thailand.     

生活垃圾分类收集引发的全民教育中的环境教育思考

在介绍国内外环境教育发展概况的基础上,探讨我国将垃圾分类收集融入环境教育的必要性与可行性。基于垃圾分类收集的特点和难点,提出应结合生活垃圾分类收集工作,将多层次的学校环境教育和全方位的社会环境教育融合实施的措施。     

Exposure to heavy metals and PCDD/Fs by the population living in the vicinity of a hazardous waste landfill in Catalonia, Spain: Health risk assessment

Most fly ashes produced in municipal waste incinerators of Catalonia (Spain) are deposited in a hazardous waste landfill (HWL) placed in Castellolí (Barcelona). This facility means a concern for the population living nearby. In response to this, we performed a probabilistic study focused on assessing human health risks derived from environmental exposure to heavy metals and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) around the HWL. Concentrations of various metals and PCDD/Fs were determined in soil and air samples collected at the HWL, and in 4 locations around it. Health risks were evaluated according to the distance from the sampling locations to the HWL (near and far-sites). In general terms, metal and PCCD/F levels were relatively low in air and soil samples. However, concentrations of PCDD/Fs, as well as those of some metals, were found to be relatively higher in the HWL and Castellolí (the nearest village) samples than in those collected far away, resulting in a slight increase of exposure to those pollutants. Anyhow, the current concentrations of metals and PCDD/Fs suggest that it is highly unlikely that there are any additional non-carcinogenic and carcinogenic risks for the population living near the HWL.     

Comparative toxicity of solid waste leachates to Daphnia magna

The comparative acute and chronic toxicities of municipal, industrial, coal-fired power plant, and synthetic fuel solid waste leachates to the aquatic invertebrate Daphnia magna were determined. Seventeen leachates were laboratory-derived by extraction with 0.5 N acetic acid, and one, an arsenic-contaminated groundwater, was naturally derived. The acute toxicity 48-h LC₅₀ estimates (concentrations of the test materials that killed 50% of the test organisms in 48 h) ranged from 0.0005% for a dye waste leachate to > 100% (i.e., undiluted) for a coal gasification waste leachate. The most toxic leachates were derived from a dye waste, a plater's waste, and the arsenic-contaminated groundwater, and the least toxic were from a soybean process cake waste and a coal gasification waste. Of the 16 leachates used in the 28 day chronic toxicity tests, only the arsenic-contaminated groundwater and a municipal sewage sludge significantly affected D. magna reproduction. The former material at 1.0% concentration and the sludge at 0.1% caused about an 88% reduction in the numbers of young produced by exposed females compared with controls. Generally, the industrial waste leachates were more toxic than those from the power plant and synthetic fuel wastes. Because its presence in the test materials interfered with interpretation of the results, acetic acid may not be an appropriate extraction medium for preparation of leachates.     

中国固体废物管理政策变迁逻辑与完善路径

系统梳理固体废物管理政策的变迁逻辑,研究固体废物管理政策的聚焦内容和发展趋向,有助于明晰固体废物管理政策完善路径。研究立足于已颁布的固体废物管理政策,运用统计方法分析固体废物管理政策的文本结构和内容,找出中国固体废物管理政策变迁的内在逻辑;紧密结合当前“无废城市”建设的政策需求,提出政策优化完善路径。研究发现:固体废物管理政策文本类型多元、效力级别多样,政策框架体系逐步优化完善;固体废物管理政策热点具有鲜明的时代发展烙印和动态演变特征,政策涉及的领域越来越广,政策内容更具针对性和全面性,政策执行更具指向性和可操作性;无害化、减量化、资源化,污染防治、监督管理、二次污染、回收利用、循环经济等是政策关注焦点;政府从宏观层面强化顶层设计,以政策引导规范为主,注重政策协同、技术支撑、治理水平提升等助推无害化、减量化、资源化目标实现;固体废物管理政策实施的工具手段多元化、要素支撑多样化,固体废物管理的技术支撑关注度逐步提升、管理模式与治理路径已进入适应性转型。立足现实需要,固体废物管理的市场化政策与激励机制不足,适用性技术关注度不高,综合管理水平和治理能力亟待提升。结合国外“无废城市”建设的理论研究、实践行动和政策举措,从固体废物生命周期管理政策、技术范式政策、主体协同政策、引导激励政策及法律法规政策等方面提出中国“无废城市”建设的政策完善路径方向。