Environmental and economic benefit of recycling model of packaging waste:a case study on aluminum

In order to achieve sustainable utilization of natural resources, save energy and protect environment and ecosystem, it is important for a region or a nation to develop and implement a viable waste recycling model from both theoretical and practical point of view. Some packaging recycling models operated in developed countries are introduced in this article. Aluminium can recovery and recycling is emphasized. Cost effective, economic and environmental benefit of different models are compared and analyzed. The result shows that all recycling models have their characteristics due to the initial purpose of recovery and the situation of the implementing country. However, all the models contribute to the reduction of municipal solid waste disposal and resources conservation.     

The Essence of a Recycling Economy: Circular Utilization of Resources

Abstract

By analyzing the relationship between a recycling economy and sustainable development theory, this article puts forward the basic concept of a recycling economy as a dynamic economic operational model, and explains the four basic characteristics. It is stressed that the essential element of a recycling economy is the use of resources circularly. In the end, this article analyzes the phenomena of utilizing the recycling economy concept incorrectly, and sets forth a number of problems that should be noted during the process of developing a recycling economy in China.     

Introduction of a recycling system for sustainable municipal solid waste management: a case study on the greater Banjul area of the Gambia

This research proposes for the introduction of a recycling system in the Gambia to enhance sustainable municipal solid waste management. Poor infrastructures, coupled with inadequate resources and lack of funding, work against the optimization of a MSW disposal service. In the authors’ view, authorities in charge of waste management need to change not only behaviors, but modernize their processes. Recycling technology is a key part of the solution. A model has been developed which suggest the involvement of stakeholders to achieve meaningful sustainable MSWM. This can be achieved by recognizing the role of the informal sector through community-based organizations, Non-Governmental Organizations (NGOs), and the private sector. The open dump approach is leading to severe environmental consequences as the groundwater and soil within the dump is been contaminated. In this study, an integrated municipal solid waste management approach was developed with a model to help achieve sustainable municipal solid waste management. Resource recovery, not waste disposal, must be the ultimate goal with clearly defined end user markets so that the recovery loop is complete. Mandatory sorting of waste at household level would help greatly in making recycling activity successful.     

国外废旧家用电子电器回收再利用研究

随着废旧家用电子电器数量和种类的增加及其产生的环境污染问题，废旧家用电子电器的处理处置、回收再利用引起世界各国的广泛关注。本文阐述了一些工业发达国家在废旧家用电子电器回收再利用方面所采取的措施、取得的成功经验和未来发展趋势。     

Cancer mortality in towns in the vicinity of incinerators and installations for the recovery or disposal of hazardous waste

BackgroundWaste treatment plants release toxic emissions into the environment which affect neighboring towns.ObjectivesTo investigate whether there might be excess cancer mortality in towns situated in the vicinity of Spanish-based incinerators and installations for the recovery or disposal of hazardous waste, according to the different categories of industrial activity.MethodsAn ecologic study was designed to examine municipal mortality due to 33 types of cancer, across the period 1997–2006. Population exposure to pollution was estimated on the basis of distance from town of residence to pollution source. Using Besag–York–Mollié (BYM) regression models with Integrated Nested Laplace approximations for Bayesian inference, and Mixed Poisson regression models, we assessed the risk of dying from cancer in a 5-kilometer zone around installations, analyzed the effect of category of industrial activity, and conducted individual analyses within a 50-kilometer radius of each installation.ResultsExcess cancer mortality (BYM model: relative risk, 95% credible interval) was detected in the total population residing in the vicinity of these installations as a whole (1.06, 1.04–1.09), and, principally, in the vicinity of incinerators (1.09, 1.01–1.18) and scrap metal/end-of-life vehicle handling facilities, in particular (1.04, 1.00–1.09). Special mention should be made of the results for tumors of the pleura (1.71, 1.34–2.14), stomach (1.18, 1.10–1.27), liver (1.18, 1.06–1.30), kidney (1.14, 1.04–1.23), ovary (1.14, 1.05–1.23), lung (1.10, 1.05–1.15), leukemia (1.10, 1.03–1.17), colon–rectum (1.08, 1.03–1.13) and bladder (1.08, 1.01–1.16) in the vicinity of all such installations.ConclusionsOur results support the hypothesis of a statistically significant increase in the risk of dying from cancer in towns near incinerators and installations for the recovery or disposal of hazardous waste.     

The application of system dynamics in different practices of a waste management system

The continuous increase in waste generation warrants global management of waste to reduce the adverse economic, social, and environmental impact of waste while achieving goals for sustainability. The complexity of waste management systems due to different waste management practices renders such systems difficult to analyze. System dynamics (SD) approach aids in conceptualizing and analyzing the structure, interactions, and mode of behavior of the complex systems. The impact of the underlying components can therefore be assessed in an integrated way while the impact of possible policies on the system can be studied to implement appropriate decisions. This review summarizes various applications of SD pertinent to the waste management practices in different countries. Practices may include waste generation, reduction, reuse/recovery, recycling, and disposal. Each study supports regional-demanding targets in environmental, social, and economic scopes such as expanding landfill life span, implementing proper disposal fee, global warming mitigation, energy generation/saving, etc. The interacting variables in the WMS are specifically determined based on the defined problem, ultimate goal, and the type of waste. Generally, population and gross domestic product can increase the waste generation. An increase in waste reduction, source separation, and recycling rate could decrease the environmental impact, but it is not necessarily profitable from an economic perspective. Incentives to separate waste and knowledge about waste management are variables that always have a positive impact on the entire system.

     

Recovery and recycling of post-consumer waste materials. Part 1. Generalities and target wastes (paper,cardboard and aluminium cans)

Recycling of post-consumer waste materials is gaining increased interest due to public awareness, legislative promotion and imposition, economic benefits and appropriate technologies being available. The present paper does not deal with municipal solid waste as such, but only with the recyclable constituents. The paper does not aim at presenting recycling process details and/or fundamental research results, but reviews the major recyclables with their reuse potential, recycling technologies used, problems, solutions and potential areas of future research and development. These target recyclables include paper and cardboard, aluminium cans, glass beverage bottles, scrap metal and steel cans, scrap tyres, batteries and household hazardous waste. The present paper sets the overall picture and deals with paper, cardboard and aluminium cans only. A second part of the paper assesses the other target recyclables. The assessment of the waste availability, the existing and currently developed recovery and recycling technologies, and the economically rewarding markets while recycling, stress the technical, economic and environmental importance of this waste management sector. The activities associated with the recovery and recycling of post-consumer wastes require a strong sustainable engineering input at all phases of the treatment, from input quality control, to the selection of the most appropriate technology and the delivery of the recyclables as readily reusable feedstock.     

基于农户兼业视角的农业废弃物资源循环利用意愿及其影响因素比较

基于农户兼业视角,利用湖北省农村地区的微观调查数据,运用Logistic回归模型比较了不同兼业类型农户农业废弃物资源循环利用意愿及其影响因素。研究结果显示：（1）大部分农户具有农业废弃物资源循环利用意愿,其中纯农户和一兼农户的利用意愿相当,且高出二兼农户;（2）农户对农业废弃物资源价值的感知是影响不同兼业类型农户利用意愿的共同因素,农户感知农业废弃物资源的价值越高,其利用意愿也越强;（3）影响不同兼业类型农户利用意愿的因素有明显差异,性别对农户尤其是二兼农户的利用意愿有显著的正向作用;年龄对纯农户和二兼农户利用意愿的影响均为负,尤其是对纯农户影响更大;土地经营规模对农户尤其是一兼农户的利用意愿有显著的正向影响;对获取经济收益的感知正向作用于一兼农户和二兼农户的利用意愿,尤其是对一兼农户有更大程度影响;对纯农户而言,对自身经济条件的感知也显著影响其利用意愿     

再生资源价值回收率分析

目前国内关于再生资源利用水平评价方法的研究仍较少,本文着眼于构建一种再生资源有效价值利用水平的评价方法,并用于实例分析。首先从再生资源利用总量的角度,提出了衡量再生资源利用水平的评价指标及其计算方法;然后基于再生资源加工利用过程中的价值变化,定义了以原生资源生产的零部件或产品的价值为基准价值的回收指标,将再生资源整体价值回收率作为评价再生资源利用水平的新指标,并结合价值回收流程构建了以再生资源不同用途下的利用量和价值回收率为变量的计算模型;最后选取某再生资源园区,计算其近期和中远期的废旧物资价值回收率,说明在资源化率基本不变的情况下,通过提高再利用率和再制造率可提升再生资源的价值回收率。     

Construction and demolition waste generation in cities in India: an integrated approach

ABSTRACT

This paper quantifies construction and demolition waste (C&DW) generation rate in Indian cities using bottom-up material flow analysis approach. A dynamic model was applied to different classes of cities in India to investigate how C&DW generation rate varies across different classes of cities. The data on construction and demolition activities in different classes of cities were estimated from information reported in secondary literature. The results show that urban areas in India generated over 150 million tonnes of C&DW in 2016, and almost 50% of waste was generated in small to medium towns. The paper concludes with discussion on opportunities for recycling of C&DW and closing the material loops in Indian cities.     

The formal electronic recycling industry: Challenges and opportunities in occupational and environmental health research

BackgroundE-waste includes electrical and electronic equipment discarded as waste without intent of reuse. Informal e-waste recycling, typically done in smaller, unorganized businesses, can expose workers and communities to serious chemical health hazards. It is unclear if formalization into larger, better-controlled electronics recycling (e-recycling) facilities solves environmental and occupational health problems.ObjectivesTo systematically review the literature on occupational and environmental health hazards of formal e-recycling facilities and discuss challenges and opportunities to strengthen research in this area.MethodsWe identified 37 publications from 4 electronic databases (PubMed, Web of Science, Environmental Index, NIOSHTIC-2) specific to chemical exposures in formal e-recycling facilities.DiscussionEnvironmental and occupational exposures depend on the degree of formalization of the facilities but further reduction is needed. Reported worker exposures to metals were often higher than recommended occupational guidelines. Levels of brominated flame-retardants in worker's inhaled air and biological samples were higher than those from reference groups. Air, dust, and soil concentrations of metals, brominated flame-retardants, dioxins, furans, polycyclic-aromatic hydrocarbons, or polychlorinated biphenyls found inside or near the facilities were generally higher than reference locations, suggesting transport into the environment. Children of a recycler had blood lead levels higher than public health recommended guidelines.ConclusionsWith mounting e-waste, more workers, their family members, and communities could experience unhealthful exposures to metals and other chemicals. We identified research needs to further assess exposures, health, and improve controls. The long-term solution is manufacturing of electronics without harmful substances and easy-to-disassemble components.     

Atmospheric Mercury Pollution in Beijing

Abstract

The atmospheric mercury pollution in Beijing is a serious problem. Atmospheric mercury has three sources: natural emission, anthropogenic emission and previously deposited mercury reemission or recycling, composing elemental mercury, divalent mercury and particulate-phase mercury. Many studies showed that mercury in Beijing’s air was higher than the general level of mercury concentration in the atmosphere. Mercury emission sources were discussed. Industrial emissions, coal burning, vehicle exhaust emissions and waste incineration were thought to be the main sources of atmospheric mercury pollution in Beijing. And also meteorology has an effect on atmospheric mercury concentration in Beijing. Measures have been taken to control the emission of mercury into the air in recent years.     

Socio-environmental consideration of phosphorus flows in the urban sanitation chain of contrasting cities

Understanding how cities can transform organic waste into a valuable resource is critical to urban sustainability. The capture and recycling of phosphorus (P), and other essential nutrients, from human excreta is particularly important as an alternative organic fertilizer source for agriculture. However, the complex set of socio-environmental factors influencing urban human excreta management is not yet sufficiently integrated into sustainable P research. Here, we synthesize information about the pathways P can take through urban sanitation systems along with barriers and facilitators to P recycling across cities. We examine five case study cities by using a sanitation chains approach: Accra, Ghana; Buenos Aires, Argentina; Beijing, China; Baltimore, USA; and London, England. Our cross-city comparison shows that London and Baltimore recycle a larger percentage of P from human excreta back to agricultural lands than other cities, and that there is a large diversity in socio-environmental factors that affect the patterns of recycling observed across cities. Our research highlights conditions that may be “necessary but not sufficient” for P recycling, including access to capital resources. Path dependencies of large sanitation infrastructure investments in the Global North contrast with rapidly urbanizing cities in the Global South, which present opportunities for alternative sanitation development pathways. Understanding such city-specific social and environmental barriers to P recycling options could help address multiple interacting societal objectives related to sanitation and provide options for satisfying global agricultural nutrient demand.

     

Identification of potential applications for recycled polymeric multi-material

Abstract

This research aims to characterise a recycled polymeric multi-material, explore potential areas of application for it and analyse the eventual impacts of the introduction of this new recycled material (NRM) on end-of-life activities. Thus, this research presents a practical study regarding recycled polymeric multi-material from toothbrushes. A preliminary characterisation (via density determination, tensile test and dynamic mechanical thermal analysis – DMTA) and data analysis using the Cambridge Engineering Selector (CES-Edupack 2013) software have been done. The study also presents an analysis of the impacts of introducing the NRM into end-of-life activities. Results shows that, based on the properties considered in this study, NRM may have potential for new applications. The impact on recycling networks indicates that it is a positive solution that would improve process variable efficiencies, maintaining material value as long as possible in industrial closed-loop life cycles. However, an in loco analysis of the treatment of waste containing the NRM is necessary.     

Solid waste management in Bogotá: the role of recycling associations as investigated through SWOT analysis

In emerging economies, recycling provides an opportunity for cities to increase the lifespan of sanitary landfills, to reduce the costs of solid waste management, to decrease environmental problems from waste treatment by reincorporating waste into the productive cycle and to protect and develop the livelihoods of citizens who work as informal waste pickers. However, few studies have analysed the possibilities of and strategies for integrating the formal and informal sectors in solid waste management for the benefit of both. This integration is the key, especially in developing countries, to understanding how the recycling population can develop a business despite their social and economic limitations. The aim of this study was to perform a strength, weakness, opportunity and threat (SWOT) analysis of three recycling associations in Bogotá with the aim of examining and understanding the recycling situation from the perspective of members of the informal sector in their transition to becoming authorised waste providers. This issue has rarely been studied in the context of developing countries. The data used in the analysis are derived from multiple sources, including a literature review, Bogota’s recycling database, focus group meetings, governmental reports, national laws and regulations and interviews with key stakeholders. The results of this study show that as the primary stakeholders, the formal and informal waste management sectors can identify the internal and external conditions of recycling in Bogotá. Several strategies were designed based on the SWOT analysis. The participation of recycling associations is important in the design and application of waste policy, the consolidation of recycling through an effective business model, promotional programmes for social inclusion and the development of new transformation processes and technologies to valorise recycling materials. In conclusion, recycling associations can become authorised waste providers through a profitable business that increases recycling rates to create a productive process from waste during the generation of new materials and to decrease environmental problems while improving the welfare and living conditions of recyclers. These findings are important for Bogotá to advance and promote recycling as a key strategy for integrated sustainable waste management in the city.     

Characterization of monitor recycling in Seattle, Washington

With the rapid growth of electronic waste (e-waste), policies that aim to effectively manage this waste stream have been introduced globally in recent years. Seattle, Washington, has been on the forefront of introducing policies to divert e-waste from the landfills and maximize recycling. With the introduction of the Take-it-Back-Network, a solid recycling infrastructure has existed in the Greater Seattle region since 2003. In 2009, the E-Cycle Washington program took into effect and now allows recyclers to offer free recycling of certain e-waste to households and small entities. Although policies to divert e-waste from the landfill to reuse and recycling is effective, there is also a need to analyze the current regional recycling infrastructure’s capacity to handle changing equipment and material quantities. This study aims to characterize the Seattle regional e-waste management capacity, with a focus on retired monitors as an example of a changing e-waste technology. We investigated waste computer monitor recycling in the Greater Seattle region, which includes the counties of King, Pierce, Snohomish, and Kitsap. Interviews were conducted on 20 collectors, 1 handler, and 2 processors to collect information on their business models, computer monitor management processes, and collection/processing quantities. Using this information, we summarize the material flows of end-of-life (EOL) cathode ray tube (CRT) and liquid crystal display (LCD) monitors in the region, both from the qualitative and quantitative perspective.     

快递废弃物回收产业链演化仿真研究

近年来,随着电子商务的迅速崛起,快递废弃物激增所带来的环境污染、资源浪费程度日趋严重,营建快递废弃物回收产业链,促进快递废弃物循环使用的呼声日益急促。快递废弃物的循环使用涉及到多方利益相关者,本文基于利益主体协同演化视角,分别构建未引入政府约束机制和引入政府约束机制的"快递企业-消费者"演化博弈模型,借以探索政府、消费者及快递企业在快递废弃物回收产业链营建过程中所扮演的角色,借助复制动态方程得到利益相关方的演化稳定策略和规律,并进一步应用MATLAB仿真工具进行仿真模拟,研究结果表明:未引入政府约束机制下,博弈系统难以依靠市场调节快速演化到理想状态,快递企业和消费者会反复权衡参与营建快递废弃物回收产业链的收益和成本,根据净收益进行策略选择,当二者净收益大于0时,博弈系统会逐渐演化为理想状态,反之,博弈系统则会逐渐演化为不良状态。引入政府约束机制可以快速的引导快递企业和消费者向理想状态演化,加大对快递企业营建回收产业链的补贴力度以及对营建回收产业链怠工的罚款程度能够促进快递废弃物回收产业链营建的快速高效执行。本文的研究对快递废弃物回收产业链的营建起到一定的启示作用:1从政府的角度出发,快递废弃物回收产业链的成功营建能够带来社会环境资源福利的增加,所以不应仅仅依靠市场行为,政府应当充分发挥其在营建过程中的引导作用;2从快递企业的角度出发,快递企业是回收产业链的实施方,应将环境保护作为企业发展的责任,积极主动参与回收产业链的营建;3从消费者的角度出发,作为回收产业链运行的初始点,消费者应该从自身做起,提高环保意识,责任意识,积极推动回收产业链的营建。     

循环经济园区发展的技术经济分析

建设资源节约型、环境友好型社会,必须大力发展循环经济。通过剖析江西星火工业园发展循环经济案例,对循环经济园区的发展进行了技术经济分析。循环经济园区是一种先进的生产组织形式,在园区内,上游企业的废弃物或副产品成为下游企业的原料,新的产业链得到延伸,逐步形成产业网,节省了自然资源,减少环境污染;基础设施、公共服务和知识信息得到共享,交易费用减少,提高了企业综合效益。园区以物质与能量循环利用为目标、以产业集群为载体,通过专业化分工和全面合作,经济、社会和生态环境效益显著。     

Role of religious communities in enhancing transition experiments: a localised strategy for sustainable solid waste management in Malaysia

Religion in its most ideal form is seen as a powerful force to create ecological transformations to succeeding generations that share similar religious beliefs. This provides an interesting argument for enhancing their role in sustainability transitions. Malaysia is a relevant geographical context in this regard since almost all of its citizens formally embrace some kind of religious belief. However, such ideas are discussed mostly at the theoretical level with little systematic empirical investigation. This paper aims to fill this gap by presenting theoretically informed empirical insights on how a number of religious communities are currently creating successful experiments in recycling within the context of an urban community in Malaysia. The paper argues that such evidence may demonstrate the ‘potential’ role of religious communities to provide localised resources for recycling experiments that can be advantageous for the transition towards a more sustainable municipal solid waste management in Malaysia. The empirical basis of this paper is based on an exploratory multiple case study of successful recycling programmes conducted by selected religious communities from four key religions in Malaysia—Buddhism, Christianity, Hinduism and Islam. The theoretical framework for this research is based on the sustainability transitions literature, particularly the ‘transition experiment’ framework.