The effects on waste reduction and recycling rates when different components of the waste stream are counted

States differ in the components or solid waste management activities which they include when determining solid waste reduction and recycling rates. Thus, when attempting to draw comparisons among states, confusion arises in two ways: (1) use of two types of rates; and (2) use of different components or activities when calculating a given rate. This paper presents a mathematical basis for understanding the impacts on rate calculations when variations occur in the components and activities included in those calculations. Estimates of the incremental changes occurring in the rate calculations when incineration or selected components such as yard waste, construction and demolition wastes, and junked automobiles, are added to a base of municipal solid waste constituents are found using national data. Finally, the achieved rates reported by states counting different combinations are compared.     

An overview of waste materials recycling in the Sultanate of Oman

Various wastes and by-product materials are generated in the Sultanate of Oman including reclaimed asphalt pavement (RAP) aggregate, demolition concrete, cement by-pass dust (CBPD), copper slag, petroleum-contaminated soils (PCS), discarded tires, incinerator ash, and others. Recycling of such materials in construction is not practiced. Research data are also minimal into the potential use of selected materials in construction applications. This paper will present the results of several laboratory studies conducted into the use of PCS in asphalt concrete mixtures; on the use of CBPD in soil stabilization and flowable fill mixtures; on the utilization of copper slag and CBPD as cementitious materials; on the use of incinerator ash in cement mortars; and on the use of RAP aggregate in road bases and sub-bases. Laboratory data generally indicate that it is feasible to partially reuse some of these materials in construction provided that economic incentives and environmental concerns are taken into consideration.     

Financing electronic waste recycling Californian households' willingness to pay advanced recycling fees

The growth of electronic waste (e-waste) is of increasing concern because of its toxic content and low recycling rates. The e-waste recycling infrastructure needs to be developed, yet little is known about people's willingness to fund its expansion. This paper examines this issue based on a 2004 mail survey of California households. Using an ordered logit model, we find that age, income, beliefs about government and business roles, proximity to existing recycling facilities, community density, education, and environmental attitudes are significant factors for explaining people's willingness to pay an advanced recycling fee (ARF) for electronics. Most respondents are willing to support a 1% ARF. Our results suggest that policymakers should target middle-aged and older adults, improve programs in communities with existing recycling centers or in rural communities, and consider public-private partnerships for e-waste recycling programs.     

Source separation recycling schemes: A survey

Municipal waste arisings continued to increase during the 1970s in all the industrialized economies. Currently, in the midst of a severe international economic recession, the continuing escalation in the costs of waste disposal poses significant problems for municipal authorities. With the data constraints firmly in mind, this paper estimates the secondary materials supply potential of the municipal waste stream. The calculations suggest that a significant supply potential remains to be utilized despite ‘respectable’ overall recycling rates in most industrial economies. Resource recovery options can be divided into ‘low technology’ source separation schemes and ‘high technology’ mechanical separation schemes. The authors concentrate on the former option and appraise (on the basis of social cost-benefit analysis) a number of schemes that have operated in both Europe and North America.     

Metals recycling in the United States

Twenty-two metals for which secondary recovery is important, in terms of quantity and/or value, were compared and ranked for rate and efficiency of recycling, and availability of recycled metal. In general, their recycling rates trended upward over the period 1970–1993. Iron, aluminum, copper, gold, platinum, and lead accounted for most of the value of all secondary metal produced, while iron and steel dominated in terms of quantity produced and exported. The factors most influential on recycling rates are profitability, public support, organization of infrastructure, sortability, legislative support, and scrap purity. The share of supply accounted for by secondary metals is expected to surpass that of primary metals sometime in the next decade.     

Reuse of ornamental rock-cutting waste in aluminous porcelain

Large amounts of solid wastes are discarded in the ornamental rocks industry. This work investigates the incorporation of ornamental rock-cutting waste as a raw material into an aluminous porcelain body, replacing natural feldspar material by up to 35 wt.%. Formulations containing rock-cutting waste were pressed and sintered at 1350 °C. The porcelain pieces were tested to determine their properties (linear shrinkage, water absorption, apparent density, mechanical strength, and electrical resistivity). Development of the microstructure was followed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The results showed that ornamental rock-cutting waste could be used in aluminous porcelains, in the range up to 10 wt.%, as a partial replacement for traditional flux material, resulting in a valid route for management of this abundant waste.     

Life cycle assessment of waste paper management: The importance of technology data and system boundaries in assessing recycling and incineration

The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing on global warming potentials. The consequence of choosing a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate was studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved biomass, in order to study the importance of the system boundary choices. For recycling, the choice of virgin paper manufacturing data is most important, but the results show that also the impacts from the reprocessing technologies fluctuate greatly. For the overall results the choice of the technology data is of importance when comparing recycling including virgin paper substitution with incineration including energy substitution. Combining an environmentally high or low performing recycling technology with an environmentally high or low performing incineration technology can give quite different results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system to include substitution of fossil fuel energy by production of energy from the saved biomass associated with recycling will give a completely different result. In this case recycling is always more beneficial than incineration, thus increased recycling is desirable. Expanding the system to include forestry was shown to have a minor effect on the results. As assessments are often performed with a set choice of data and a set recycling rate, it is questionable how useful the results from this kind of LCA are for a policy maker. The high significance of the system boundary choices stresses the importance of scientific discussion on how to best address system analysis of recycling, for paper and other recyclable materials.     

Two Measured Parameters Correlated to Participation Rates in Curbside Recycling Schemes in the UK

Local authorities in the United Kingdom are currently changing their approach towards recycling as they attempt to meet legislative targets. An important part of this drive is the provision of an effective curbside recycling service and it is vital to understand the parameters that influence the performance of the system offered. In this article, three primary datasets, collected from over 1400 households each, are examined for parameters correlated to participation rates. Two measured parameters were found that are not commonly identified in previous studies of curbside recycling schemes, and they are shown to merit further investigation as useful tools for planning purposes. One is the number of types of material collected; participation rates are greater for schemes collecting more materials. The second is the number of households situated on the same road; the lower the number, the higher the participation rate. In both cases, evidence of the measured correlation is presented, justifying their usefulness for planning. The multiple underlying factors causing the correlations are not identified here, but suggestions are made for further studies.     

The effect of recycling price uncertainty on municipal waste management choices

This paper analyzes the effect of price uncertainty and irreversible investment on the decision of municipalities to switch from landfill waste disposal to recycling by developing a model to predict recycling adoption behavior and applying it to empirical data. It is shown that uncertainty regarding the price of recycled materials may induce a risk neutral municipality to prefer landfill disposal, even when recycling is less expensive. A model is developed to describe the switching process and estimate its parameters using empirical data from 79 municipalities in Israel. The model is then used to predict municipalities' recycling adoption decisions under various assumptions regarding price uncertainty. The results support the hypothesis that price uncertainty is a major obstacle for recycling. Finally, several options for price stabilization are sketched and it is argued that these policies may be effective in establishing viable recycling markets.     

Households’ recycling efforts

Households’ recycling effort is often argued to be of an insignificant size. It is also frequently argued that this contribution, if significant, is not a cost to households, since it is voluntary. Thus households’ use of time and energy are frequently disregarded in cost-benefit analyses of stricter recycling targets. In this survey, based on 1162 interviews, we find that sorting at source involves significant extra use of time and energy in the households. On average, each of those asked reported that they use close to half an hour a week for cleaning, sorting and transporting recyclable waste. On average, 185 h is used per tonne of waste. Four out of ten reported that they use warm or hot water to clean the materials. When investigating the motives for sorting waste, we find that many perceive sorting as mandatory, while some in fact find it a pleasant activity in itself. Moral motives for sorting at source are also widespread. A majority would prefer that a company took over the sorting if this were possible, and on average, the respondents are willing to pay US$ 20/year for this service.     

Present status of the recycling of waste electrical and electronic equipment in Korea

In Korea due to rapid economical growth followed by urbanisation, breakage of large traditional families into small nuclear families, continuous changes in equipment features and capabilities causes tremendous increase in sale of new electrical and electronic equipment (EEE) and decrease in sale of used EEE. Subsequently, the ever-increasing quantity of waste electrical and electronic equipment (WEEE) has become a serious social problem and threat to the environment. Therefore, the gradual increase in the generation of WEEE intensifies the interest for recycling to conserve the resources and protect the environment. In view of the above, a review has been made related to the present status of the recycling of waste electrical and electronic equipment in Korea. This paper describes the present status of generation and recycling of waste electrical and electronic equipment, namely TVs, refrigerators, washing machines, air conditioners, personal computers and mobile phones in Korea. The commercial processes and the status of developing new technologies for the recycling of metallic values from waste printed circuit boards (PCBs) is also described briefly. Since 1998, three recycling centers are in full operation to recycle WEEE such as refrigerators, washing machines and air conditioners, having the total capacity of 880,000 units/year. All waste TVs are recently recycled on commission basis by several private recycling plants. The recycling of waste personal computers and mobile phones is insignificant in comparison with the amount of estimated obsolete those. Korea has adopted and enforced the extended producer responsibility (EPR) system. Korea is making consistent efforts to improve the recycling rate to the standards indicated in the EU directives for WEEE. Especially environmentally friendly and energy-saving technologies are being developed to recycle metal values from PCBs of WEEE.     

An illicit economy: scavenging and recycling of medical waste

This paper discusses a significant illicit economy, including black and grey aspects, associated with medical waste scavenging and recycling in a megacity, considering hazards to the specific group involved in scavenging as well as hazards to the general population of city dwellers. Data were collected in Dhaka, Bangladesh, using a variety of techniques based on formal representative sampling for fixed populations (such as recycling operatives) and adaptive sampling for roaming populations (such as scavengers). Extremely hazardous items (including date expired medicines, used syringes, knives, blades and saline bags) were scavenged, repackaged and resold to the community. Some HCE employees were also observed to sell hazardous items directly to scavengers, and both employees and scavengers were observed to supply contaminated items to an informal plastics recycling industry. This trade was made possible by the absence of segregation, secure storage and proper disposal of medical waste. Corruption, a lack of accountability and individual responsibility were also found to be contributors. In most cases the individuals involved with these activities did not understand the risks. Although motivation was often for personal gain or in support of substance abuse, participants sometimes felt that they were providing a useful service to the community.     

Investigating household preferences for kerbside recycling services in London: a choice experiment approach

Recent developments in national and European Union waste management policy have prompted considerable interest in alternative waste management programs, such as recycling, which could divert a portion of the municipal solid waste stream from landfills. This paper examines household preferences for kerbside recycling services and uses a stated preference choice experiment method to estimate households' valuation of such services. Using a sample of 188 households in the London area, the empirical analysis yields estimates of the willingness to pay for the number of 'dry' materials collected, the collection of compost, textile collection and the frequency of collection.     

Municipal solid waste production and composition in Finland—Changes in the period 1960–2002 and prospects until 2020

Waste reduction was recognised as the main goal of waste management policy in the EU in the 1990s. Although knowledge of past waste generation is essential for effective waste reduction policy there are no comprehensive statistics on the past development of municipal solid waste (MSW) production. MSW management is currently under turmoil in many EU countries as the requirements of the EC landfill directive (1999/31/EC) are set into force. In this study, the production and composition of MSW in Finland between 1960 and 2002 is presented using historical data. The impact of population, affluence and technology on MSW production are analysed using the IPAT equation and three scenarios are constructed until year 2020. The results are compared with national future targets on MSW production. Production of MSW increased in Finland until 1990, declined to year 1997, increased to 2000 and then declined again. The share of organic and plastic waste increased over the study period while the share of paper and cardboard declined. The results suggest that so far national targets on MSW reduction have been set fairly low. Moreover, our scenarios depict a wide range of future MSW production, even though the time horizon is not longer than 15 years into the future. In order to narrow this range, continuous improvement of the statistics of MSW is essential.     

Municipal solid waste generation in Kathmandu, Nepal

Waste stream characteristics must be understood to tackle waste management problems in Kathmandu Metropolitan City (KMC), Nepal. Three-stage stratified cluster sampling was used to evaluate solid waste data collected from 336 households in KMC. This information was combined with data collected regarding waste from restaurants, hotels, schools and streets. The study found that 497.3 g capita(-1) day(-1) of solid waste was generated from households and 48.5, 113.3 and 26.1 kg facility(-1) day(-1) of waste was generated from restaurants, hotels and schools, respectively. Street litter measured 69.3 metric tons day(-1). The average municipal solid waste generation rate was 523.8 metric tons day(-1) or 0.66 kg capita(-1) day(-1) as compared to the 320 metric tons day(-1) reported by the city. The coefficient of correlation between the number of people and the amount of waste produced was 0.94. Key household waste constituents included 71% organic wastes, 12% plastics, 7.5% paper and paper products, 5% dirt and construction debris and 1% hazardous wastes. Although the waste composition varied depending on the source, the composition analysis of waste from restaurants, hotels, schools and streets showed a high percentage of organic wastes. These numbers suggest a greater potential for recovery of organic wastes via composting and there is an opportunity for recycling. Because there is no previous inquiry of this scale in reporting comprehensive municipal solid waste generation in Nepal, this study can be treated as a baseline for other Nepalese municipalities.     

PET containers in Brazil: Opportunities and challenges of a logistics model for post-consumer waste recycling

The use of post-consumer materials is directly related to reducing the cost of production and extraction of natural resources. Non-recyclable materials are randomly disposed in the environment. Brazil is one of the largest consumers of PET (polyethylene terephthalate) bottles. The purpose of this paper is to describe the opportunities and challenges of the logistics model for post-consumer PET bottle recycling in Brazil, while providing knowledge of its practices along the recycling chain. The results describe the need to educate those directly and indirectly involved in the process; to reduce consumption in order to reduce the amount of waste generated; to structure the post-consumer reverse chain and engage industrial sectors and government, through public policies, to support cleaner technologies along the PET bottle production chain.     

Characterization of waste materials originating from Quebec supermarkets and an assessment of recycling potential

This study evaluated, both qualitatively and quantitatively, waste materials from several major Quebec grocery stores. Averaged over nine sampling dates, cardboard, paper and wood products represented 43 and 74% of waste material, based on weight and volume, respectively while organic matter including fruits, vegetables, baked goods and meat products represented 40 and 10% of waste material based on weight and volume. Plastics, wrapping and bagging materials, represented over 7 and 13% of waste material based on weight and volume, respectively, and other recyclable waste materials such as glass, metal and various miscellaneous objects, represented 4 and 2% of waste material based on weight and volume. On average, 60.6 kg waste/employee per week was generated by the three stores. Store size was not a determining factor in the composition of grocery store waste material. These results suggest that costs associated with supermarket waste disposal may be substantially reduced by source-separation of recyclable and compostable materials while reducing pressure for incineration or landfill. Therefore, the adoption of recycling and source-separation programs, and studies to determine problems and costs associated with the implementation of such programs are recommended.     

Personality, individual differences, and demographic antecedents of self-reported household waste management behaviours

The present study sought to extend recent conceptual frameworks of waste management behaviours by examining personality, individual differences, and socio-demographic antecedents of self-reported waste recycling, reuse, and reduction behaviours. A total of 203 participants from a British community sample completed a questionnaire consisting of measures of their self-reported waste management behaviour, Machiavellianism, political cynicism, the Big Five personality traits, and socio-demographics. The results of structural equation modelling showed that individuals who were less Machiavellian, less politically cynical, older, and more conscientious were more likely to report positive waste management behaviours. In combination, these predictors explained 22.0% of the variance in waste management behaviours. Thus, these variables may improve the predictive validity of existing conceptual models of waste management behaviours. The results are discussed in relation to those models.     

Global disposal strategies for waste cathode ray tubes

The collection and management of waste electrical and electronic appliances around the world, and the possible negative environmental consequences have been an issue of current debate. Cathode ray tubes (CRTs) used as display screen for computer monitors and televisions contains large quantities of lead, estimated at between 0.5 and 4 kg, depending on the size of the CRT and has been identified as the most polluting of all electronic waste components. Having failed the tests used in the toxicity characterization of solid wastes, CRTs have been declared ‘hazardous’ and subsequently banned from landfills and incinerators in most developed countries. Presently, large quantities of CRTs are generated globally with only few developed countries having effective take back and sound management program. Meanwhile, large quantities of CRT-containing devices are being moved across frontiers into developing countries in the name of ‘reuse’ and ‘bridging the digital divide’. With near absence of recycling infrastructure for electronic wastes in most developing countries, waste CRTs are disposed of with MSW at open dumps and unsanitary landfills. This paper reviews the current practices in the management of CRTs around the world, with emphasis on the role of regulations, availability of recycling infrastructure, recycling/reuse routes, and export into developing countries. Inappropriate disposal of waste CRTs creates the opportunity for large-scale environmental contamination with heavy metals, especially lead. Appropriate disposal routes are required globally in the management of CRTs in order to mitigate environmental contamination and human exposure to toxins.     

Business environmental initiatives: Beyond waste reduction and recycling

Xerox was one of the first U.S. companies to discover that environmentally sound practices not only result in good community relations, but also often more than pay for themselves. This article presents ideas and guidelines companies can use in their waste reduction and recycling programs. Implementing a waste reduction and recycling program is an important step toward improved environmental performance. Given the numerous ways businesses affect the environment—through purchasing, manufacturing, and resource consumption—waste reduction and recycling are just two of many potential environmental measures. This article will highlight further initiatives your business can take toward sustainable development, defined as development that meets the needs of the present without compromising the ability of future generations to meet their own needs.